| Age | Commit message (Collapse) | Author |
|---|
|
- Continue with system suspend even if an Endpoint doesn't respond with
PME_TO_Ack message (Manivannan Sadhasivam)
- Remove the Baikal-T1 controller driver since it never quite became usable
(Andy Shevchenko)
- Set Endpoint MSI-X Table Size in the correct function of a multi-function
device when configuring MSI-X, not in Function 0 (Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Clean up in the dw_pcie_resume_noirq() error path (Manivannan Sadhasivam)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
- Fix type mismatch for kstrtou32_from_user() in debugfs write functions
(Hans Zhang)
* pci/controller/dwc:
PCI: dwc: Fix type mismatch for kstrtou32_from_user() return value
PCI: dwc: Expose PCIe event counters for groups 5 to 7 over debugfs
PCI: dwc: Perform cleanup in the error path of dw_pcie_resume_noirq()
PCI: dwc: ep: Mirror the max link width and speed fields to all functions
PCI: dwc: ep: Fix MSI-X Table Size configuration in dw_pcie_ep_set_msix()
PCI: dwc: Remove not-going-to-be-supported code for Baikal SoC
PCI: dwc: Proceed with system suspend even if the endpoint doesn't respond with PME_TO_Ack message
|
|
The "Other Logic Block" found in the EyeQ6Lplus from Mobileye provides
various functions for the controllers present in the SoC.
The OLB produces 22 clocks derived from its input, which is connected
to the main oscillator of the SoC.
It provides reset signals via two reset domains.
It also controls 32 pins to be either a GPIO or an alternate function.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add an entry to the mobileye bindings for the EyeQ6Lplus
which is part of the EyeQ family of system-on-chip.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add timestamp provider support for the Tegra264 in devicetree
bindings. Tegra264 has two generic timestamping engines (GTE)
which are the always-on GTE (AON) and legacy interrupt
controller (LIC) GTE.
'nvidia,slices' property is deprecated and hence not allowed for
Tegra264.
Signed-off-by: Suneel Garapati <suneelg@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
|
|
Add support for the Milos SoC, which uses IPA v5.2.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260410-ipa-v5-2-v2-1-778422a05060@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This MDIO hardware is based on a Microsemi design supported in Linux by
mdio-mscc-miim.c. However, The register interface is completely different
with pic64hpsc, hence the need for separate documentation.
The hardware supports C22 and C45.
The documentation recommends an input clock of 156.25MHz and a prescaler
of 39, which yields an MDIO clock of 1.95MHz.
The hardware supports an interrupt pin to signal transaction completion
which is not strictly needed as the software can also poll a "TRIGGER"
bit for this.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260408131821.1145334-2-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the binding requires 'spi-cpha' for SJA1105 and 'spi-cpol'
for SJA1110.
However, the SJA1110 supports both SPI modes 0 and 2. Mode 2
(cpha=0, cpol=1) is used by the NXP LX2160 Bluebox 3.
On the SolidRun i.MX8DXL HummingBoard Telematics, mode 0 is stable,
while forcing mode 2 introduces CRC errors especially during bursts.
Drop the requirement on spi-cpol for SJA1110.
Fixes: af2eab1a8243 ("dt-bindings: net: nxp,sja1105: document spi-cpol/cpha")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260409-imx8dxl-sr-som-v2-1-83ff20629ba0@solid-run.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the rockchip,rk3399-gru-sound.txt DT binding to DT Schema
format.
Update rockchip,cpu from a single I2S controller phandle to a
phandle-array. Add an optional second entry for the SPDIF controller,
as seen in rk3399-gru.dtsi, required by boards with DisplayPort audio.
Signed-off-by: Anushka Badhe <anushkabadhe@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410055532.60868-1-anushkabadhe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The J722S CPSW3G is mostly identical to the AM64's, but additionally
supports SGMII. The AM64 compatible ti,am642-cpsw-nuss is used as a
fallback.
Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/191e9f7e3a6c14eabe891a98c5fb646766479c0a.1775558273.git.nora.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ref-sync-sources phandle-array property to the dpll-pin schema
allowing board designers to declare which input pins can serve as
sync sources in a Reference-Sync pair. A Ref-Sync pair consists of
a clock reference and a low-frequency sync signal where the DPLL locks
to the clock but phase-aligns to the sync reference.
Update both examples in the Microchip ZL3073x binding to demonstrate
the new property with a 1 PPS sync source paired to a clock source.
Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver now supports generation of both BCLK and MCLK, document
support for #clock-cells = <0> for legacy case and #clock-cells = <1>
for the new case which can differentiate between BCLK and MCLK.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The i.MX8M/Mini/Nano/Plus variant of the SAI IP has control registers
shifted by +8 bytes and requires additional bus clock. Document support
for the i.MX8M variant of the IP with this register shift and additional
clock. Update the description slightly.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clock driver updates from Bjorn Andersson:
- Global TCSR, RPMh, and display clock controller support for
the Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller
support for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Introduce various smaller display-related fixes across
Qualcomm Kaanapali, Milos, SC8280XP, SM4450, SM8250, and
SA8775P.
- Add missing GDSCs and fix retention flags for PCIe and USB
power domains on SC8180X.
- Enable runtime PM support to ensure performance votes are
propagated to CX on Qualcomm platforms.
- Mark the USB QTB clock as always-on on Qualcomm Hamoa, in
order to ensure the SMMU can work even when USB controller
device is sleeping.
- Qualcomm IPQ6018 and IPQ8074 support in the IPQ CMN PLL
driver
- MDSS resets for Qualcomm SC7180, SM6115, and SM6125, to allow
display subsystem driver to reset the hardware from the state
left by the bootloader.
* tag 'qcom-clk-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074
clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018
clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains
dt-bindings: clock: qcom: Add missing power-domains property
clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock
clk: qcom: dispcc-sc7180: Add missing MDSS resets
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung
Pull Samsung SoC clock driver updates from Krzysztof Kozlowski:
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Exynos850: Define missing clock for the APM mailbox
* tag 'samsung-clk-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: exynos850: Add APM-to-AP mailbox clock
dt-bindings: clock: exynos850: Add APM_AP MAILBOX clock
clk: samsung: Use %pe format to simplify
clk: samsung: pll: Fix possible truncation in a9fraco recalc rate
clk: samsung: exynosautov920: add block G3D clock support
dt-bindings: clock: exynosautov920: add G3D clock definitions
clk: samsung: gs101: harmonise symbol names (clock arrays)
clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC
clk: samsung: Add clock PLL support for ARTPEC-9 SoC
dt-bindings: clock: Add ARTPEC-9 clock controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx
Pull i.MX clock driver updates from Abel Vesa:
- Add optional ENET reference pad clock inputs for i.MX6Q/UL
- Fix debug output in PLL14xx driver to use unsigned format specifier
- Add 333.333 MHz and 477.4 MHz support to fracn-gppll for display use cases
- Fix device node reference leaks in i.MX6 driver
- Fix device node reference leak in of_assigned_ldb_sels()
- Fix ACM clock flags on i.MX8 to prevent SAI sysclk failures
- Move VF610_CLK_END define into the driver
- Add VF610 Ethernet switch clock support
- Correct CSI PHY parent clock selection on i.MX8MQ
* tag 'clk-imx-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx8mq: Correct the CSI PHY sels
clk: vf610: Add support for the Ethernet switch clocks
dt-bindings: clock: vf610: Add definitions for MTIP L2 switch
dt-bindings: clock: vf610: Drop VF610_CLK_END define
clk: vf610: Move VF610_CLK_END define to clk-vf610 driver
clk: imx: imx8-acm: fix flags for acm clocks
clk: imx: imx6q: Fix device node reference leak in of_assigned_ldb_sels()
clk: imx: imx6q: Fix device node reference leak in pll6_bypassed()
clk: imx: fracn-gppll: Add 477.4MHz support
clk: imx: fracn-gppll: Add 333.333333 MHz support
clk: imx: pll14xx: Use unsigned format specifier
dt-bindings: clock: imx6q[ul]-clock: add optional clock enet[1]_ref_pad
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
- Clock driver for the Rockchip RV1103B SoC
For whatever reason that SoC only got a B addition to the name,
but major changes internally - likely it is pin compatible with
the non-b-variant. Other change is actually exporting PCIe
pipe-clocks that were already in the binding.
* tag 'v7.1-rockchip-clk1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3568: Add PCIe pipe clock gates
clk: rockchip: Add clock controller for the RV1103B
dt-bindings: clock: rockchip: Add RV1103B CRU support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull more Renesas clk driver updates from Geert Uytterhoeven:
- Add SPI clocks and resets on Renesas RZ/G3E
- Add PCIe clocks and resets on Renesas RZ/V2N, RZ/V2H(P), and RZ/G3E
- Enable watchdog reset on Renesas RZ/N1D
- Remove clocks for watchdogs meant for other CPU cores on Renesas RZ/V2N
- Handle critical clock during system resume on Renesas RZ/G2L, RZ/G2UL, and
RZ/G3S
- Add initial support for the Renesas RZ/G3L (R9A08G046) SoC
* tag 'renesas-clk-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: Add support for RZ/G3L SoC
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
clk: renesas: rzg2l: Re-enable critical module clocks during resume
clk: renesas: rzg2l: Add rzg2l_mod_clock_init_mstop_helper()
clk: renesas: rzg2l: Add helper for mod clock enable/disable
clk: renesas: r9a0{7g04[34],8g045}: Add critical reset entries
clk: renesas: rzg2l: Add support for critical resets
clk: renesas: r9a09g056: Remove entries for WDT{0,2,3}
clk: renesas: r9a06g032: Enable watchdog reset sources
clk: renesas: cpg-mssr: Use struct_size() helper
clk: renesas: r9a09g047: Add PCIe clocks and reset
clk: renesas: r9a09g057: Add PCIe clocks and reset
clk: renesas: r9a09g056: Add PCIe clocks and reset
clk: renesas: r9a09g047: Add entries for the RSPIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux into clk-tenstorrent
Pull Tenstorrent clk driver updates from Drew Fustini:
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC
* tag 'tenstorrent-clk-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux:
clk: tenstorrent: Add Atlantis clock controller driver
reset: tenstorrent: Add reset controller for Atlantis
dt-bindings: clk: tenstorrent: Add tenstorrent,atlantis-prcm-rcpu
|
|
Add support for the USB 2.0 Dual-Role Device (DRD) controller embedded
in the StarFive JHB100 SoC. The controller is based on the Synopsys
DesignWare Core USB 3 (DWC3) IP.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260410112500.90432-2-minda.chen@starfivetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert Atmel High-Speed USB Device Controller (USBA) binding to DT schema.
Changes during conversion:
- Make the "clock-names" property flexible enough to accept the items
in any order as the existing in tree DTS nodes doesn't follow an order.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260327-atmel-usb-v4-5-eb8b6e49b29d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert Atmel AT91 USB Device Controller (UDC) binding to DT schema.
Changes during conversion:
- Include "atmel,pullup-gpio" and "atmel,matrix" in the properties since
they are required by existing in-tree DTS definitions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Link: https://patch.msgid.link/20260327-atmel-usb-v4-4-eb8b6e49b29d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
constraints
Add clock and phy constraints for atmel,at91sam9g45-ehci and reorganize
the allOf section to fix dtbs_check warnings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Link: https://patch.msgid.link/20260327-atmel-usb-v4-3-eb8b6e49b29d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Atmel AT91RM9200 OHCI USB host controller binding to DT schema
by defining it in the existing generic OHCI schema.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260327-atmel-usb-v4-2-eb8b6e49b29d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 7.0 (part 1)
A new device tree has been merged without a binding, which triggered
warnings during dtb_checks. The commit in this pull request fixes this
issue, enabling easier detection of new problems in device trees by
reducing the number of false warnings.
* tag 'mvebu-fixes-7.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
dt-bindings: arm64: add Marvell 7k COMe boards
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Arm64 DeviceTree updates for v7.1
Introduce the Hamoa-based Lenovo IdeaCentre Mini X, the Dragonwing
IQ-615 (Talos) EVK, and a Talos EVK camera overlay.
Enable DisplayPort support on the Glymur CRD.
Add WiFi, Bluetooh, LEDs, and venus on LG-based SDM845 devices. Add
battery, charger, and display on the LG G7 ThinQ.
Enable SD-card, describe the audio amplifier, and increase the speed of
the i2c clock for touchscreen on the SHIFT SHIFT6mq.
Add camera subsystem, camera control interface, GPU, GMU, and GPU
cooling on the Talos platform. Enable the GPU on the Ride board.
* tag 'qcom-arm64-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X
dt-bindings: arm: qcom: Document the Lenovo IdeaCentre Mini X
arm64: dts: qcom: sdm845-shift-axolotl: Enable TFA9890 codec
arm64: dts: qcom: sdm845-shift-axolotl: Set higher touchscreen i2c clock
arm64: dts: qcom: sdm845-shift-axolotl: Enable sdcard
arm64: dts: qcom: talos: Add clocks for QoS configuration
arm64: dts: qcom: talos-evk-camera: Add DT overlay
arm64: dts: qcom: talos: Add camera MCLK pinctrl
arm64: dts: qcom: talos: Add CCI definitions
arm64: dts: qcom: talos: Add camss node
arm64: dts: qcom: talos: Add EL2 overlay
arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
arm64: dts: qcom: talos/qcs615-ride: Fix inconsistent USB PHY node naming
dt-bindings: arm: qcom: talos-evk: Add QCS615 Talos EVK SMARC platform
arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU
arm64: dts: qcom: talos: Add GPU cooling
arm64: dts: qcom: talos: Add gpu and rgmu nodes
arm64: dts: qcom: talos: add the GPU SMMU node
arm64: dts: qcom: sdm845-lg-common: Add chassis-type
arm64: dts: qcom: sdm845-lg: Add wifi nodes
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V soc drivers for v7.1
Microchip:
Add coverage for the pic64gx in the system controller and syscons.
Add a interrupt mux driver (akin to the one that Renesas recently added)
that fixes a problem where the platform never properly modelled gpio
interrupts. There's a gpio driver change here that Bartosz has acked
that adds the interrupt support to the GPIO driver itself.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: microchip: mpfs-sys-controller: add support for pic64gx
dt-bindings: soc: microchip: mpfs-sys-controller: Add pic64gx compatibility
dt-bindings: soc: microchip: add compatible for the mss-top-sysreg on pic64gx
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V devicetrees for v7.1
Generic:
Add binding coverage for Supm.
Microchip:
Add support for the picgx64 and its curiosity board. This is a PolarFire
SoC without the FPGA.
Add the missing tsu_clk for ptp on the macb on PolarFire SoC and resolve
a long-running problem with gpio interrupts being incorrectly described
on the platform.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: update mpfs gpio interrupts to better match the SoC
riscv: dts: microchip: add tsu clock to macb on mpfs
dt-bindings: riscv: Add Supm extension description
riscv: dts: microchip: remove POLARFIRE mention in Makefile
riscv: dts: microchip: add pic64gx and its curiosity kit
dt-bindings: riscv: microchip: document the PIC64GX curiosity kit
dt-bindings: timer: sifive,clint: add pic64gx compatibility
riscv: dts: microchip: add pinctrl nodes for mpfs/icicle kit
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Support for the RV1103B SoC and the Onion Omega4 board using it.
While the RV1103B only got a B-extension to its name, the SoC internals
were reworked heavily. So likely it's mainly pin compatible to the
non-B variant.
The dt-binding for the RV1103B clock driver is shared with the clock-
driver branch going into the clock-tree.
* tag 'v7.1-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add Onion Omega4 Evaluation Board
dt-bindings: arm: rockchip: Add Omega4 Evaluation board
ARM: dts: rockchip: Add support for RV1103B
dt-bindings: soc: rockchip: grf: Add RV1103B compatibles
dt-bindings: clock: rockchip: Add RV1103B CRU support
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add documentation for the device tree binding of the XDP720 eFuse.
Signed-off-by: Ashish Yadav <ashish.yadav@infineon.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260410070154.3313-2-Ashish.Yadav@infineon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 7.1
For K3 SoC
- Add I2C support
- Add PMIC regulator tree
- Add ethernet support
- Add pinctrl/GPIO/Clock
- Enable full UART support
For K1 SoC
On Milk-V Jupiter
- Enable PCIe/USB on
- Enable QSPI/SPI NOR
- Enable EEPROM, LEDs
Others
- Fix PMIC supply properties
- Fix PCIe missing power regulator
* tag 'spacemit-dt-for-7.1-1' of https://github.com/spacemit-com/linux:
dts: riscv: spacemit: k3: add P1 PMIC regulator tree
dts: riscv: spacemit: k3: Add i2c nodes
riscv: dts: spacemit: enable PCIe ports on Milk-V Jupiter
riscv: dts: spacemit: enable USB 3 ports on Milk-V Jupiter
riscv: dts: spacemit: enable QSPI and add SPI NOR on Milk-V Jupiter
riscv: dts: spacemit: add i2c aliases on Milk-V Jupiter
riscv: dts: spacemit: add 24c04 eeprom on Milk-V Jupiter
riscv: dts: spacemit: add LEDs for Milk-V Jupiter board
riscv: dts: spacemit: Add ethernet device for K3
riscv: dts: spacemit: drop incorrect pinctrl for combo PHY
riscv: dts: spacemit: reorder phy nodes for K1
riscv: dts: spacemit: k3: add full resource to UART
riscv: dts: spacemit: k3: add GPIO support
riscv: dts: spacemit: k3: add pinctrl support
riscv: dts: spacemit: k3: add clock tree
dt-bindings: serial: 8250: spacemit: fix clock property for K3 SoC
riscv: dts: spacemit: Add 'linux,pci-domain' to PCIe nodes for K1
riscv: dts: spacemit: adapt regulator node name to preferred form
riscv: dts: spacemit: Update PMIC supply properties for BPI-F3 and Jupiter
riscv: dts: spacemit: pcie: fix missing power regulator
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add devicetree schema for Microchip MCP998X/33 and MCP998XD/33D
Multichannel Automotive Temperature Monitor Family.
Signed-off-by: Victor Duicu <victor.duicu@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403-add-mcp9982-hwmon-v12-1-b3bfb26ff136@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the compatible string for the sony,aps-379. This is a simple PMBus
(I2C) device that requires no additional attributes.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410012414.2818829-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently, foo-sram is allowed, but foo-bar-sram is not.
Allow it so that more complex names aren't unnecessarily simplified.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-topic-sram_dtbindings_misc-v2-1-59dc6b0dec45@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible for Milos SoC IMEM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260410-milos-imem-v3-1-d215385fa5ab@fairphone.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of assorted thermal drivers for 7.1-rc1 from Daniel
Lezcano:
"- Added an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Added hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamped correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Added the SDM670 compatible DT bindings for the Tsens and the lMH
drivers (Richard Acayan)
- Added the SM8750 compatible DT bindings for the Tsens (Manaf
Meethalavalappu Pallikunhi)
- Added the Eliza SoC compatible DT bindings for the Tsens (Krzysztof
Kozlowski)
- Fixed inverted condition check on error in the Spear driver (Gopi
Krishna Menon)
- Converted the DT bindings documentation into DT schema (Gopi Krishna
Menon)
- Used max() macro to increase readibility in the Broadcom STB thermal
sensor (Thorsten Blum)
- Removed stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-v7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
thermal/drivers/sprd: Fix temperature clamping in sprd_thm_temp_to_rawdata
thermal/drivers/imx91: Add hwmon support
thermal/of: Add OF node address to output message
|
|
Merge cpufreq updates for 7.1-rc1:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
* pm-cpufreq: (38 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
...
|
|
Document support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. Introduce DT properties
'realtek,clkout-ssc-enable', 'realtek,rxc-ssc-enable' and
'realtek,sysclk-ssc-enable' which control CLKOUT, RXC and SYSCLK
SSC spread spectrum clocking enablement on these signals. These
clock are not exposed via the clock API, therefore assigned-clock-sscs
property does not apply.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260405233008.148974-2-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort the documented properties alphabetically, no functional change.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260405233008.148974-1-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Johan Hovold <johan@kernel.org> says:
These drivers reuse the OF node of their parent multi-function device
but fail to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Note that the first two patches will cause a trivial conflict with Doug's
series adding accessor functions for struct device flags which has now been
merged to the driver-core tree:
https://lore.kernel.org/r/20260406232444.3117516-1-dianders@chromium.org
Link: https://patch.msgid.link/20260408073055.5183-1-johan@kernel.org
|
|
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Another round of SDCA fixes a couple of fix to the IRQ cleanup
from Richard, and a minor tweak to the IRQ handling from me.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Still a bit higher amount than wished, but nothing looks really scary,
and all changes are about nice and smooth device-specific fixes.
- HD-audio quirks, one revert for a regression and another oneliner
- AMD ACP quirks
- Fixes for SDCA interrupt handling
- A few Intel SOF, avs and NVL fixes
- Fixes for TAS2552 DT, NAU8325, and STM32"
* tag 'sound-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: acp: update DMI quirk and add ACP DMIC for Lenovo platforms
ASoC: SDCA: Unregister IRQ handlers on module remove
ASoC: SDCA: mask Function_Status value
ASoC: SDCA: Fix overwritten var within for loop
ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J
ASoC: SOF: Intel: hda: modify period size constraints for ACE4
ALSA: hda/intel: enforce stricter period-size alignment for Intel NVL
ASoC: nau8325: Add software reset during probe
Revert "ALSA: hda/realtek: Add quirk for Gigabyte Technology to fix headphone"
ASoC: Intel: avs: Fix memory leak in avs_register_i2s_test_boards()
ASoC: SOF: Intel: fix iteration in is_endpoint_present()
ASoC: SOF: Intel: Fix endpoint index if endpoints are missing
ASoC: SDCA: Fix errors in IRQ cleanup
ASoC: amd: acp: add Lenovo P16s G5 AMD quirk for legacy SDW machine
ASoC: dt-bindings: ti,tas2552: Add sound-dai-cells
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IAH10
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, IPsec and wireless. This is again
considerably bigger than the old average. No known outstanding
regressions.
Current release - regressions:
- net: increase IP_TUNNEL_RECURSION_LIMIT to 5
- eth: ice: fix PTP timestamping broken by SyncE code on E825C
Current release - new code bugs:
- eth: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure
Previous releases - regressions:
- core: fix cross-cache free of KFENCE-allocated skb head
- sched: act_csum: validate nested VLAN headers
- rxrpc: fix call removal to use RCU safe deletion
- xfrm:
- wait for RCU readers during policy netns exit
- fix refcount leak in xfrm_migrate_policy_find
- wifi: rt2x00usb: fix devres lifetime
- mptcp: fix slab-use-after-free in __inet_lookup_established
- ipvs: fix NULL deref in ip_vs_add_service error path
- eth:
- airoha: fix memory leak in airoha_qdma_rx_process()
- lan966x: fix use-after-free and leak in lan966x_fdma_reload()
Previous releases - always broken:
- ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group
dump
- bridge: guard local VLAN-0 FDB helpers against NULL vlan group
- xsk: tailroom reservation and MTU validation
- rxrpc:
- fix to request an ack if window is limited
- fix RESPONSE authenticator parser OOB read
- netfilter: nft_ct: fix use-after-free in timeout object destroy
- batman-adv: hold claim backbone gateways by reference
- eth:
- stmmac: fix PTP ref clock for Tegra234
- idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
- ipa: fix GENERIC_CMD register field masks for IPA v5.0+"
* tag 'net-7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (104 commits)
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
net: lan966x: fix page pool leak in error paths
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
nfc: pn533: allocate rx skb before consuming bytes
l2tp: Drop large packets with UDP encap
net: ipa: fix event ring index not programmed for IPA v5.0+
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
MAINTAINERS: Add Prashanth as additional maintainer for amd-xgbe driver
devlink: Fix incorrect skb socket family dumping
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Revert "mptcp: add needs_id for netlink appending addr"
mptcp: fix slab-use-after-free in __inet_lookup_established
net: txgbe: leave space for null terminators on property_entry
net: ioam6: fix OOB and missing lock
rxrpc: proc: size address buffers for %pISpc output
rxrpc: only handle RESPONSE during service challenge
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
rxrpc: Fix integer overflow in rxgk_verify_response()
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
...
|
|
'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
The Top Level Mode Multiplexer (TLMM) in the Qualcomm Hawi SoC
provides GPIO and pinctrl functionality for UFS, SDC and 226
GPIO pins.
Add a DeviceTree binding to describe the TLMM block on Qualcomm's
Hawi SoC.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Convert pinctrl-max77620 devicetree bindings for the MAX77620 PMIC from
TXT to YAML format. This patch does not change any functionality; the
bindings remain the same.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Remove the cavium,thunder-8890 GPIO binding as there are no active
use cases. The binding is unused as the corresponding kernel driver
binds via PCI and not the compatible.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260408093313.17025-1-i.shihao.999@gmail.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add the "brcm,bcm7038-padconf" compatible to the pinctrl-single binding.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The pin controller on the Apple silicon t8122 (M3) SoC is compatible
with the existing driver. Add "apple,t8122-pinctrl" as SoC specific
compatible under "apple,t8103-pinctrl" used by the driver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
