summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)Author
2026-03-03dt-bindings: soc: microchip: add compatible for the mss-top-sysreg on pic64gxConor Dooley
pic64gx has an identical sysreg syscon to mpfs, add it using a fallback. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2026-03-03dt-bindings: display: bridge: waveshare,dsi2dpi: Document 1..4 DSI lane supportMarek Vasut
Describe 1..4 DSI lanes as supported. Internally, this bridge is an ChipOne ICN6211 which loads its register configuration from a dedicated storage and its I2C does not seem to be accessible. The ICN6211 supports up to 4 DSI lanes, so this is a hard limit for this bridge. The lane configuration is preconfigured in the bridge for each of the WaveShare panels. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260115024004.660986-1-marek.vasut+renesas@mailbox.org Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2026-03-03dt-bindings: clock: imx6q[ul]-clock: add optional clock enet[1]_ref_padFrank Li
Add optional clock source enet_ref_pad for imx6q, enet1_ref_pad for imx6ul, which input from ENET ref pad. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://patch.msgid.link/20260121-ccm_dts-v3-1-820ce9b5fa38@nxp.com Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
2026-03-03dt-bindings: auxdisplay: ht16k33: Use unevaluatedProperties to fix common ↵Frank Li
property warning Change additionalProperties to unevaluatedProperties because it refs to /schemas/input/matrix-keymap.yaml. Fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dtb: keypad@70 (holtek,ht16k33): 'keypad,num-columns', 'keypad,num-rows' do not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml# Fixes: f12b457c6b25c ("dt-bindings: auxdisplay: ht16k33: Convert to json-schema") Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2026-03-03dt-bindings: arm: nvidia: Document the Tegra238 CCPLEX clusterThierry Reding
Tegra238 is derived from Tegra234 and uses a similar CCPLEX cluster, with slight variations but the same programming model. Add a compatible string to specify this particular implementation. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2026-03-03dt-bindings: cpufreq: qcom-hw: document Eliza cpufreq hardwareAbel Vesa
Document the cpufreq hardware on the Eliza SoC. Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2026-03-02spi: Merge up v7.0-rc2Mark Brown
This gets us a fix for KUnit which allows us to test it.
2026-03-02regulator: pf9453: Fix IRQ trigger and allowMark Brown
Merge series from Franz Schnyder <franz.schnyder@toradex.com>: The IRQ_B pin is an open-drain output. The datasheet specifies, that the IRQ_B pin is pulled low when any unmasked interrupt bit status is changed, and it is released high once the application processor reads the INT1 register. As it specifies a level-low behavior, it should not force a falling-edge interrupt. Remove the IRQF_TRIGGER_FALLING to not force the falling-edge interrupt and instead rely on the flag from the device tree. Set the IRQF_SHARED to be able to share the interrupt line with other devices. If the interrupt has not been triggered by the PMIC, return IRQ_NONE.
2026-03-02dt-bindings: arm: fsl: Add GOcontroll Moduline IV/MiniMaud Spierings
Document the compatible strings for the Moduline IV and Mini. Also add a compatible for the Ka-Ro Electronics TX8M-1610 SoM that they are based on. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-03-02dt-bindings: arm: fsl: Add FRDM-IMX91S boardYanan Yang
Add DT compatible string for NXP FRDM-IMX91S board The FRDM-IMX91S is a low-cost, compact development board based on the i.MX91 applications processor. It is a cost-optimized variant of the FRDM-IMX91 board, with notable hardware differences requiring a separate DTS: - 512MB LPDDR4 (FRDM-IMX91 uses 1GB) - 256MB FlexSPI-NAND (FRDM-IMX91 uses 8GB eMMC) - Single GbE port (FRDM-IMX91 has dual GbE) - PMIC PF9453 (FRDM-IMX91 uses PCA9451A) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-03-02dt-bindings: arm: fsl: add Variscite DART-MX91 BoardsStefano Radaelli
Add DT compatible strings for Variscite DART-MX91 SoM and Variscite development carrier Board. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com>
2026-03-02dt-bindings: hwmon: sl28cpld: Drop sa67mcu compatibleMichael Walle
I was just informed that this product is discontinued (without being ever released to the market). Pull the plug and let's not waste any more maintainers time and revert commit 0f6eae86e626 ("dt-bindings: hwmon: sl28cpld: add sa67mcu compatible"). Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20260302122540.1377444-8-mwalle@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2026-03-02ASoC: dt-bindings: tegra: Add compatible for Tegra238 sound cardSheetal
Tegra238 requires different PLLA and PLLA_OUT0 clock rates compared to other Tegra platforms. Add Tegra238 compatible string to the APE tegra-audio-graph-card bindings. Signed-off-by: Sheetal <sheetal@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260302085323.3139571-2-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-03-02ASoC: tegra: Add support for WM8962 and CPCAPMark Brown
Merge series from Svyatoslav Ryhel <clamor95@gmail.com>: Add support for WM8962 and CPCAP codecs found in various Tegra devices.
2026-03-02PCI: dwc: Remove not-going-to-be-supported code for Baikal SoCAndy Shevchenko
As noticed in the discussion [1] the Baikal SoC and platforms are not going to be finalized, hence remove stale code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1] Link: https://patch.msgid.link/20260220142600.2397070-1-andriy.shevchenko@linux.intel.com
2026-03-02ASoC: partial match the sdca codec nameMark Brown
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: Currently, we set a predefined codec component name in a DAI link. But the codec name may contain an index which is not fixed. This series suggest using partial match the codec name to fix the issue.
2026-03-02dt-bindings: clock: rockchip: Add RV1103B CRU supportFabio Estevam
Add support for the Rockchip RV1103B Clock and Reset Unit (CRU). The RV1103B CRU is compatible with the existing RV1126B binding. Add the compatible string to the schema and introduce the corresponding clock ID definitions. Signed-off-by: Fabio Estevam <festevam@nabladev.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260210022620.172570-1-festevam@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2026-03-02dt-bindings: arm: Add Zena CSS compatibilityDebbie Horsfall
Add compatibility to Arm Zena CSS Fixed Virtual Platform [1]. [1] https://www.arm.com/products/automotive/compute-subsystems/zena Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com> Message-Id: <20260212-zena-css-v2-1-d33ea23cb9c2@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
2026-03-02dt-bindings: net: can: nxp,sja1000: add reference to mc-peripheral-props.yamlFrank Li
Add a reference to mc-peripheral-props.yaml to allow vendor-specific properties for memory access timings. Fix below CHECK_DTBS warings: arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dtb: can@4,0 (nxp,sja1000): Unevaluated properties are not allowed ('fsl,weim-cs-timing' was unexpected) from schema $id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260212163000.1195586-1-Frank.Li@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2026-03-02dt-bindings: pinctrl: marvell,armada3710-xb-pinctrl: add missing items keywordGabor Juhos
Even though the type of the 'groups' property of a pinmux node is specified as string-array in pinmux-node.yaml, but trying to use multiple strings causes dtbs_check warnings. For example, checking the following dts ... $ cat arch/arm64/boot/dts/marvell/armada-3720-test.dts /dts-v1/; #include "armada-372x.dtsi" &pinctrl_nb { pwm-gpio-pins { groups = "pwm0", "pwm1", "pwm2", "pwm3"; function = "gpio"; }; }; ... results in this warning: arch/arm64/boot/dts/marvell/armada-3720-test.dtb: pinctrl@13800 (marvell,armada3710-nb-pinctrl): pwm-gpio-pins:groups: ['pwm0', 'pwm1', 'pwm2', 'pwm3'] is too long from schema $id: http://devicetree.org/schemas/pinctrl/marvell,armada3710-xb-pinctrl.yaml Add the missing 'items' keyword to the schema to allow using multiple strings without such warnings. Also adjust the indentation of the next statements accordingly. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Fixes: c1c9641a04e83 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-03-02Merge tag 'drm-misc-next-2026-02-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v7.1: UAPI Changes: connector: - Add panel_type property fourcc: - Add ARM interleaved 64k modifier nouveau: - Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO Cross-subsystem Changes: coreboot: - Clean up coreboot framebuffer support dma-buf: - Provide revoke mechanism for shared buffers - Rename move_notify callback to invalidate_mappings and update users. - Always enable move_notify - Support dma_fence_was_initialized() test - Protect dma_fence_ops by RCU and improve locking - Fix sparse warnings Core Changes: atomic: - Allocate drm_private_state via callback and convert drivers atomic-helper: - Use system_percpu_wq buddy: - Make buddy allocator available to all DRM drivers - Document flags and structures colorop: - Add destroy helper and convert drivers fbdev-emulation: - Clean up gem: - Fix drm_gem_objects_lookup() error cleanup Driver Changes: amdgpu: - Set panel_type to OELD for eDP atmel-hlcdc: - Support sana5d65 LCD controller bridge: - anx7625: Support USB-C plus DT bindings - connector: Fix EDID detection - dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others - fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor' - imx8qxp-pixel-link: Improve bridge reference handling - lt9611: Support Port-B-only input plus DT bindings - tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up - Support TH1520 HDMI plus DT bindings - Clean up imagination: - Clean up komeda: - Fix integer overflow in AFBC checks mcde: - Improve bridge handling nouveau: - Provide Z-cull info to user space - gsp: Support GA100 - Shutdown on PCI device shutdown - Clean up panel: - panel-jdi-lt070me05000: Use mipi-dsi multi functions - panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes - Fix Kconfig dependencies panthor: - Add tracepoints for power and IRQs rcar-du: - dsi: fix VCLK calculation rockchip: - vop2: Use drm_ logging functions - Support DisplayPort on RK3576 sysfb: - corebootdrm: Support system framebuffer on coreboot firmware; detect orientation - Clean up pixel-format lookup sun4i: - Clean up tilcdc: - Use DT bindings scheme - Use managed DRM interfaces - Support DRM_BRIDGE_ATTACH_NO_CONNECTOR - Clean up a lot of obsolete code v3d: - Clean up vc4: - Use system_percpu_wq - Clean up verisilicon: - Support DC8200 plus DT bindings virtgpu: - Support PRIME imports with enabled 3D Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260226143615.GA47200@linux.fritz.box
2026-03-01ASoC: dt-bindings: nvidia,tegra-audio-max9808x: document additional board pinsSvyatoslav Ryhel
Document additional board pins that may be used in routing. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260223065051.13070-6-clamor95@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-03-01ASoC: dt-bindings: nvidia,tegra-audio: document WM8962 CODECSvyatoslav Ryhel
Add dt-binding for WM8962 CODEC. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://patch.msgid.link/20260223065051.13070-4-clamor95@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-03-01ASoC: dt-bindings: nvidia,tegra-audio: document CPCAP CODECSvyatoslav Ryhel
Add dt-binding for CPCAP CODEC. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://patch.msgid.link/20260223065051.13070-2-clamor95@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-03-01dt-bindings: iio: gyroscope: bosch,bmg160: add bmx055 gyroscope bindingJun Yan
Add the device-tree binding for the bosch BMX055 IMU (gyroscope part), which is compatible with bmg160. Datasheet: https://cdn.sparkfun.com/assets/b/9/1/f/4/bst-bmx055-ds000_datasheet.pdf Signed-off-by: Jun Yan <jerrysteve1101@gmail.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2026-03-01dt-bindings: iio: magnetometer: bosch,bmc150_magn: add bmx055 magnetometer ↵Jun Yan
binding Add the device-tree binding for the bosch BMX055 IMU (magnetometer part), which is compatible with bmc150_magn. Datasheet: https://cdn.sparkfun.com/assets/b/9/1/f/4/bst-bmx055-ds000_datasheet.pdf Signed-off-by: Jun Yan <jerrysteve1101@gmail.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2026-03-01dt-bindings: iio: accel: bosch,bma255: add bmx055 accel bindingJun Yan
Add the device-tree binding for the Bosch BMX055 IMU (accelerometer part), which is compatible with bmc150_accel. Datasheet: https://cdn.sparkfun.com/assets/b/9/1/f/4/bst-bmx055-ds000_datasheet.pdf Signed-off-by: Jun Yan <jerrysteve1101@gmail.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2026-03-01dt-bindings: iio: adc: adi,ad4030: Add ADAQ4216 and ADAQ4224Marcelo Schmitt
ADAQ4216 and ADAQ4224 are similar to AD4030 except that ADAQ devices have a PGA (programmable gain amplifier) that scales the input signal prior to it reaching the ADC inputs. The PGA is controlled through a couple of pins (A0 and A1) that set one of four possible signal gain configurations. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2026-03-01dt-bindings: iio: adc: adi,ad4030: Add PWMMarcelo Schmitt
In setups designed for high speed data rate capture, a PWM is used to generate the CNV signal that issues data captures from the ADC. Document the use of a PWM for AD4030 and similar devices. Reviewed-by: David Lechner <dlechner@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2026-02-28scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Add UFSHC compatible for x1e80100Pradeep P V K
Add UFS Host Controller (UFSHC) compatible for x1e80100 SoC. Use SM8550 as a fallback since x1e80100 is fully compatible with it. Qualcomm UFSHC is no longer compatible with JEDEC UFS-2.0 binding. Avoid using the "jedec,ufs-2.0" string in the compatible property. [mkp: conflict resolution] Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com> Link: https://patch.msgid.link/20260211132926.3716716-2-pradeep.pragallapati@oss.qualcomm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-02-28scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Document the Milos UFS ControllerLuca Weiss
Document the UFS Controller on the Milos SoC. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://patch.msgid.link/20260112-milos-ufs-v2-2-d3ce4f61f030@fairphone.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-02-28Merge tag 'spi-fix-v7.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "One fix for the stm32 driver which got broken for DMA chaining cases, plus a removal of some straggling bindings for the Bikal SoC which has been pulled out of the kernel" * tag 'spi-fix-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: stm32: fix missing pointer assignment in case of dma chaining spi: dt-bindings: snps,dw-abp-ssi: Remove unused bindings
2026-02-28dt-bindings: clock: exynosautov920: add G3D clock definitionsRaghav Sharma
Add device tree clock binding definitions for CMU_G3D Signed-off-by: Raghav Sharma <raghav.s@samsung.com> Link: https://patch.msgid.link/20260202103555.2089376-2-raghav.s@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-28dt-bindings: crypto: ice: add operating-points-v2 property for QCOM ICEAbhinaba Rakshit
Add support for specifying OPPs for the Qualcomm Inline Crypto Engine by allowing the use of the standard "operating-points-v2" property in the ICE device node. ICE clock management was handled by the storage drivers in legacy bindings, so the ICE driver itself had no mechanism for clock scaling. With the introduction of the new standalone ICE device node, clock control must now be performed directly by the ICE driver. Enabling operating-points-v2 allows the driver to describe and manage the frequency and voltage requirements for proper DVFS operation. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2026-02-27dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Eliza QMP UFS PHYAbel Vesa
Document the QMP UFS PHY compatible for the Eliza Platform. It is fully compatible with the PHY implemented in SM8650, so use the SM8650 compatible as fallback. While at it, move the QCS8300 one so that it is sorted correctly by fallback compatible. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://patch.msgid.link/20260223-eliza-bindings-phy-ufs-v3-1-2b0c0f00bcb6@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2026-02-27dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHYYulin Lu
Document the SATA PHY on the EIC7700 SoC platform, describing its usage. Signed-off-by: Yulin Lu <luyulin@eswincomputing.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260205082129.1482-1-luyulin@eswincomputing.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2026-02-27dt-bindings: phy: mediatek,dsi-phy: Add support for mt8167Luca Leonardo Scorcia
Add support for the MediaTek mt8167 SoC: the DSI PHY found in this chip is fully compatible with the one found in the mt2701 SoC. Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patch.msgid.link/92530e0a31eca1feb822f5c5fd4ac894937dd6c7.1771863641.git.l.scorcia@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2026-02-27dt-bindings: phy: Add Canaan K230 USB PHYJiayu Du
K230 SoC USB PHY requires configuring registers for control and configuration. Add USB phy bindings for K230 SoC. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn> Link: https://patch.msgid.link/20260121145526.14672-2-jiayu.riscv@isrc.iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2026-02-27dt-bindings: pinctrl: pincfg-node: add restrictions on conflicting propertiesConor Dooley
Many of the possible pincfg properties are not compatible with one another, either because they represent mutually exclusive states for a pin or because they provide the same information in different units. Add some simple restrictions to prevent invalid configurations. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-02-26mfd: cpcap: convert documentation to schema and addMark Brown
Merge series from Svyatoslav Ryhel <clamor95@gmail.com>: The initial goal was only to add support for the CPCAP used in the Mot Tegra20 board; however, since the documentation was already partially converted, I decided to complete the conversion to schema too.
2026-02-26dt-bindings: ARM: samsung: Add Google Manta (Nexus 10)Alexandre Marquet
Add the Google Nexus 10 board to documentation. Signed-off-by: Alexandre Marquet <tb@a-marquet.fr> Signed-off-by: Lukas Timmermann <linux@timmermann.space> Link: https://patch.msgid.link/20260127-lat3st-staging-v4-1-797469aaaf9d@timmermann.space Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-26regulator: dt-bindings: cpcap-regulator: document Mot regulatorSvyatoslav Ryhel
Document regulator composition used by the CPCAP of Tegra20 Mot board, that is a base for Atrix 4G and Droid X2. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260223063858.12208-3-clamor95@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-26regulator: dt-bindings: cpcap-regulator: convert to DT schemaSvyatoslav Ryhel
Convert devicetree bindings for the Motorola CPCAP MFD regulator subnode from TXT to YAML format. Main functionality preserved. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260223063858.12208-2-clamor95@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-26dt-bindings: input: Add Parade TC3408 touchscreen controllerLangyan Ye
The tc3408 touch screen chip same as Elan eKTH6915 controller has a reset gpio. The difference is that they have different post_power_delay_ms. Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260108063524.742464-2-yelangyan@huaqin.corp-partner.google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-02-26dt-bindings: dma: snps,dw-axi-dmac: Add CV1800B compatibleInochi Amaoto
The DMA controller on CV1800B needs to use the DMA phandle args as the channel number instead of hardware handshake number, so add a new compatible for the DMA controller on CV1800B. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260120013706.436742-2-inochiama@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2026-02-26dt-bindings: firmware: google,gs101-acpm-ipc: add S2MPG11 secondary PMICAndré Draszik
In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used as a sub-PMIC. The interface for both is the ACPM firmware protocol, so update the binding to allow the relevant node and update the example here to describe the connection for both PMICs. Since we have two PMICs here, but can not use the 'reg' property (as the addressing is based on software, i.e. the ACPM firmware), the node names reflect that with their respective suffix. The existing 'pmic' therefore becomes deprecated in favour of 'pmic-1'. While at it, update the example. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20260210-s2mpg1x-regulators-v8-1-c429d709c0e0@linaro.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-26dt-bindings: arm: samsung: add compatible for samsung-j7xelteKaustabh Chakraborty
Document the board compatible for Samsung Galaxy J7 (2016), an Exynos7870 device. Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Link: https://patch.msgid.link/20260125-exynos7870-j7xelte-v1-1-5cacc3042c42@disroot.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-26dt-bindings: cache: bt1-l2-ctl: Remove unused bindingsAndy Shevchenko
As stated in [1] the Baikal platforms are not supported and the respective driver code has just been removed. Remove unused bindings. Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1] Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260225173930.3819351-3-andriy.shevchenko@linux.intel.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-02-25dt-bindings: usb: st,st-ohci-300x: convert to DT schemaCharan Pedumuru
Convert STMicroelectronics USB OHCI Controller binding to DT schema. Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260224-st-usb-v2-1-e8b7cb6524c6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-25dt-bindings: usb: introduce nxp,imx-dwc3Xu Yang
The i.MX USB glue and DWC3 core are closely coupled. Describe the i.MX USB block in a single block will bring more benefits than a parent-child relation. The new binding is used to describe flattened usb controller node. It's a copy of the legacy binding fsl,imx8mp-dwc3.yaml with the needed modifications. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-1-ff04a75ce221@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-06-09 12:08:24 +0000