| Age | Commit message (Collapse) | Author |
|---|
|
Samsung S2MU005 is a PMIC device which has LED controllers, an MUIC and
a battery charger. The battery charger is paired with an independent
device connected via I2C which can be used to access various metrics of
the battery. Document the device as a schema.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20260304-s2mu005-fuelgauge-v3-1-e4dc4e47cde8@disroot.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
AIC version 3 as found on the Apple M3 (t8122) is very similar to AICv2 in
its base functionality. It can use the same device tree bindings as AICv2
so add it to the AICv2 bindings. This interrupt controller is used on all
Apple SoCs starting with M3 up to at least M5.
The only apparent difference is the increased IRQ config offset. Apple's
device tree codes this new offset as property of the "aic" node but the
value stayed constant for all SoCs with "aic,3". Since the SoC specific
compatible "apple,t8122-aic3" will be only used in the driver this offset
can remain a driver implementation detail.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-irq-apple-aic3-v3-1-2b7328076b8d@jannau.net
|
|
The IMX355 camera sensor is a camera sensor that can be found as the
front camera in some smartphones, such as the Pixel 3, Pixel 3 XL, Pixel
3a, and Pixel 3a XL. It already has a driver, but needs support for
device tree. Document the IMX355 to support defining it in device tree.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The clock-lanes property has no effect on the hardware configuration, as
of commit 336136e197e2 ("media: dt-bindings: media: camss: Remove
clock-lane property"). Since boards with new camss support can omit the
property, remove it from the required lists.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add properties update and new sram property necessary in order
to enable the DMA-MDMA chaining.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Aptina MI1040 is a slightly different version of the MT9M114 camera
module. It is used in several devices, such as the ASUS Nexus 7 (2012) and
the ASUS Transformer Prime TF201. The compatible "onnn,mt9m114" is placed
first in the enum, as it is considered the default compatible value.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
DS90UB954-Q1 is an FPDLink-III deserializer that is mostly register
compatible with DS90UB960-Q1. The main difference is that it supports
half of the RX and TX ports, i.e. 2x FPDLink RX ports and 1x CSI TX
port. Therefore, add support for DS90UB954 within the existing bindings.
Link: https://www.ti.com/lit/gpn/ds90ub954-q1
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The current bindings duplicate the port definitions for each FPD-Link RX
and CSI-2 TX ports. This results in a large amount of repeated schema
blocks and makes it harder to extend the bindings for new devices.
Refactor the bindings by introducing shared deftinitions for FPD-Link
input ports and CSI-2 output ports. No functional change intended.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The starfive-camss driver is no longer being worked upon for destaging,
and will be dropped in a subsequent commit, so drop the DT bindings.
Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the 'wakeup-source' property for Sitronix ST1232 touchscreen
controllers to allow the device to wake the system from suspend.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260309000319.74880-2-phucduc.bui@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
For code readability the bindings are expected to follow order shown in
example-schema.yaml - put the additionalProperties/unevaluatedProperties
entry at the end, after listing all required properties and possible
"allOf:if:then:" conditions. Meaning of this style is to close the
schema, after listing what it contains, with final "nothing more is
allowed".
Move the code around adjusting it to coding style. No functional
impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-4-3086eda1efaf@oss.qualcomm.com
|
|
The purpose of common schemas, like panel-common.yaml, is to list
applicable properties. It can list common ABI, e.g. "label" property,
and pure hardware related properties like power supply or GPIOs. In the
second case it means that all panels have these supplies or GPIOs.
This is the only meaning when hardware property is allowed in common
schema, because bindings are precise and we do not define common schemas
for "possible" hardware configurations.
Following this, all panel bindings which reference common schema and use
"unevaluatedProperties: false" do not need to list these common parts.
Simplify such bindings to also reduce copy-paste code and review time
for new contributions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-3-3086eda1efaf@oss.qualcomm.com
|
|
This MIPI-DSI LCD panel must be connected to something. According to
scarce web data it supports two channels and it is already used like
this in DTS. Reported by dtbs_check:
rockchip/rk3399-gru-scarlet-inx.dtb: panel@0 (innolux,p097pfg): 'ports' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-2-3086eda1efaf@oss.qualcomm.com
|
|
This MIPI-DSI LCD panel must be connected to something, thus add missing
port property, already used in DTS. Reported by dtbs_check:
qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306-dt-bindings-display-panel-clean-v1-1-3086eda1efaf@oss.qualcomm.com
|
|
Atrix 4G and Droid X2 are based on a board called by Motorola "Mot" and
use the same 540x960 DSI video mode panel. Exact panel vendor and model
are unknown hence generic compatible based on board name "Mot" is used.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260223064630.12720-2-clamor95@gmail.com
|
|
Add the compatible for the NT37700F panel found on the Pixel 3a XL.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260310002606.16413-3-mailingradian@gmail.com
|
|
The Pixel 3a XL is code-named by Google as "bonito". The
google,bonito-tianma compatible represents a variant of the Pixel 3a XL
board with a Tianma/Novatek NT37700F panel. Document the google,bonito
board compatible and the google,bonito-tianma variant in the bindings.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260310002606.16413-2-mailingradian@gmail.com
|
|
The Jadard jd9365da-h3 driver already allows DRM to get the panel
orientation via the device tree rotation property (described in
panel-common.yaml), but it's currently not documented.
Describe it in the driver documentation to fix a dtbs_check error in
Xiaomi Mi Smart Clock x04g, where the panel is landscape-oriented.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260309180353.8220-1-l.scorcia@gmail.com
|
|
Add a new compatible for the panel TAIGUAN XTI05101-01A. This panel uses
JD9365DA-H3 IC, so add the compatible to the jd9365da-h3 binding files.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260214085409.3489057-3-yelangyan@huaqin.corp-partner.google.com
|
|
Add the "taiguanck" vendor prefix for Shenzhen Top Group Technology Co., Ltd.
The prefix is derived from the vendor's website domain:
www.taiguanck.com/en/, which uses "taiguanck" as the primary
identifier of the company.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260214085409.3489057-2-yelangyan@huaqin.corp-partner.google.com
|
|
The LXD M9189A is a 1024x600 MIPI-DSI panel.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260218-drm-panel-ek79007ad3-v4-2-8ec448bf3ede@pengutronix.de
|
|
Add vendor prefix for LXD Research & Display, LLC.
Link: https://www.lxdinc.com/
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260218-drm-panel-ek79007ad3-v4-1-8ec448bf3ede@pengutronix.de
|
|
Add Powertip PH800480T032-ZHC19 7" LCD-TFT RGB panel compatible string.
Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217123759.169317-1-florijan.plohl@norik.com
|
|
Add EDT ET057023UDBA 5.7" 24-bit 640x480 DPI panel.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260119-v6-18-topic-panel-simple-et057023udba-v2-1-3c73f0c9d87a@pengutronix.de
|
|
The Allwinner A523 SoC family features an identical LED controller as
found on the A100.
Add a SoC-specific compatible for it, with fallback to the A100 one.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260302152724.3197587-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Merge series from Sen Wang <sen@ti.com>:
Just two minor patches that aim to tidy up the code a little bit,
as well as fix the aux_div selection in davinci_mcasp_calc_clk_div()
for mid-range dividers (33 <= div <= 4096).
Sen Wang (2):
ASoC: ti: davinci-mcasp: extract mcasp_is_auxclk_enabled() helper
ASoC: ti: davinci-mcasp: improve aux_div selection for mid-range dividers
sound/soc/ti/davinci-mcasp.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 14 deletions(-)
--
2.43.0
|
|
Add bindings for pin controller in Milos Low Power Audio SubSystem
(LPASS).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the SDM670 LMh.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260310002037.1863-3-mailingradian@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
Add the compatible for the thermal sensors on the SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260310002037.1863-2-mailingradian@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit 22e1d0d8cda7 ("dt-bindings: arm: ti:
Add Kontron SMARC-sAM67 module").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-5-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit a598ae45f48d ("dt-bindings: mfd:
sl28cpld: Add sa67mcu compatible").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20260302122540.1377444-4-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The LED controller found in the SC2730 PMIC is compatible with the one
found in the SC2731 PMIC.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260222-sc27xx-mfd-cells-v1-2-69526fe74c77@abscue.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the "realtek,rtl9607-gpio" compatible for GPIO nodes
on the RTL9607C SoC series.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20260305161106.15999-2-adilov@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Document bindings for Tenstorrent Atlantis PRCM that manages clocks
and resets. This block is instantiated multiple times in the SoC.
This commit documents the clocks from the RCPU PRCM block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
TQMa8x is a SOM family using NXP i.MX8QM CPU family
MBa8x is an evaluation mainboard for this SOM.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The SMC1 block on i.MX7ULP is already used as a clock provider in
imx7ulp.dtsi, but the corresponding dt-binding schema does not define
the required '#clock-cells' property. This results in CHECK_DTBS schema
validation errors.
Functionally, SMC1 controls the CPU run mode configuration:
- 00b: Normal Run (RUN)
- 10b: Very-Low-Power Run (VLPR)
- 11b: High-Speed Run (HSRUN)
These run modes determine the effective CPU operating point, and their
programming is tied to the OPP table.
Add the missing `#clock-cells` definition so the dt-binding schema is
consistent with the DTS and validates correctly.
Fixes: 8ba41d6bd9893 ("dt-bindings: fsl: Convert i.MX7ULP PM to json-schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add compatible string "nxp,s32n79-usdhc" for the uSDHC controller found in
NXP S32N79 series automotive SoCs.
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add "loongson,ls2k0300-mmc" dedicated compatible to represent the
eMMC/SD/SDIO controller interface of the Loongson-2K0300 chip.
Its hardware design is similar to that of the Loongson-2K2000, but it
suffers from hardware defects such as missing CMD48 interrupts.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The mux branch contains updates to the mux core along with some
corresponding changes for a couple of consumer drivers, including an mmc
driver. Let's merge it into the next branch to get it tested and queued for
the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add mux controller support for data or control lines that are muxed
between a host and multiple cards.
There are several devices supporting a choice of eMMC or SD on a single
board by both dip switch and gpio, e.g. Renesas RZ/G2L SMARC SoM and
SolidRun RZ/G2L SoM.
In-tree dts for the Renesas boards currently rely on preprocessor macros
and gpio hogs to describe the respective cards.
By adding mux-states property to sdhi controller description, boards can
correctly describe the mux that already exists in hardware - and drivers
can coordinate between mux selection and probing for cards.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Jarkko does now work for Intel anymore and since I'm currently
maintaining this driver, update my contact information here to make sure
patches get Cc'd to me as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (internally)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have three
DMAC instances. Compared to the previously supported RZ/V2H, these SoCs
are missing the error interrupt line and the reset lines, and they use
a different ICU IP.
Document them, and use RZ/T2H as a fallback for RZ/N2H as the DMACs are
entirely compatible.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260105114445.878262-4-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are two system control on Cix sky1 Soc. One is located in S0 domain,
and the other is located in S5 domain. The system control contains resets,
usb typeC and more. At this point, only the reset controller is embedded
as usb typeC uses it by phandle.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
CS42L43B variant adds dedicated PDM interface, SoundWire Clock Gearing
support and more decimators to ISRCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260306152829.3130530-3-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Group/anonymous mailboxes are not accepted for bindings maintainers, so
switch from such linux @TQ mailbox to Alexander's email.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20260212110905.52842-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Document new property arm,no-completion-irq . This optional property
is intended for hardware that does not generate completion interrupts
and can be used to unconditionally enable forced polling mode of
operation.
With this property set, such implementations which do not generate
interrupts can be interacted with, until they are fixed to generate
interrupts properly.
Note that, because the original base protocol exchange also requires
some sort of completion mechanism, it is not possible to query SCMI
itself for this property and it must be described in DT. While this
does look a bit like policy, the SCMI provider is part of the
hardware, hence DT.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20260117010241.186685-1-marek.vasut+renesas@mailbox.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix initialization commands for AHT20
- Correct a malformed email address (emc1403)
- Check the it87_lock() return value
- Fix inverted polarity (max6639)
- Fix overflows, underflows, sign extension, and other problems in
macsmc
- Fix stack overflow in debugfs read (pmbus/q54sj108a2)
- Drop support for SMARC-sAM67 (discontinued and never released to
market)
* tag 'hwmon-for-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
hwmon: (max6639) fix inverted polarity
dt-bindings: hwmon: sl28cpld: Drop sa67mcu compatible
hwmon: (it87) Check the it87_lock() return value
Revert "hwmon: add SMARC-sAM67 support"
hwmon: (aht10) Fix initialization commands for AHT20
hwmon: (emc1403) correct a malformed email address
hwmon: (macsmc) Fix overflows, underflows, and sign extension
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
|
|
Convert RAMC SDRAM/DDR controller binding to YAML format.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260227-arm-microchip-v4-5-7e2ae1c5b5d6@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Convert System Timer binding to YAML format.
Changes during conversion:
- Add "#address-cells" and "#size-cells" to the properties and required as
watchdog is defined as a child node to the timer parent node.
- Define watchdog as a pattern property along with unit address in
examples.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Link: https://lore.kernel.org/r/20260227-arm-microchip-v4-4-7e2ae1c5b5d6@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Convert Atmel Periodic interval timer of 64bit (PIT64b) binding to YAML
format.
Changes during conversion:
- Add missing compatible "microchip,sama7g5-pit64b" along with a fallback
compatible "microchip,sam9x60-pit64b".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Link: https://lore.kernel.org/r/20260227-arm-microchip-v4-3-7e2ae1c5b5d6@gmail.com
[claudiu.beznea: alphanumerically sort the enum entries]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
