| Age | Commit message (Collapse) | Author |
|---|
|
p->scx.slice and p->scx.dsq_vtime writes have no synchronization rules. The
dsq insert kfuncs write both fields synchronously from whatever context
they're called in - a direct dispatch from ops.select_cpu() writes with only
pi_lock held - and, as the kfuncs are safe to call spuriously with the
invalid dispatch discarded later, a scheduler can modify any task's slice by
spuriously calling them. The latter stands in the way of an upcoming patch
which adds kernel-granted slices that the schedulers must not be able to
modify.
Give both fields explicit rules. While the task is running, sleeping or
queued on an rq-owned DSQ, the rq lock protects them - these are the states
where the kernel consumes the slice. While queued on a user DSQ or on the
BPF side, the kernel neither consumes nor decides on the fields and every
writer acts for the BPF scheduler - synchronizing the writers is the
scheduler's responsibility and whichever write lands last wins.
To conform, an insert kfunc no longer writes the fields when called. The
values travel with the dispatch and take effect when the task is inserted. A
discarded dispatch has no side effects. The rq lock rule is asserted at the
slice store.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
SCX_ENQ_IGNORE_CAPS is kernel-internal and marks a placement the kernel
forces. scx_caps_for_enq() waives the enqueue cap for it, but a PREEMPT
insert still picks up the preemption cap requirement from
scx_caps_for_preempt(). Update scx_caps_for_preempt() to take enq_flags and
require nothing when SCX_ENQ_IGNORE_CAPS is set.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The dsq insert kfuncs reject __SCX_ENQ_INTERNAL_MASK bits in
scx_dsq_insert_preamble() instead of scx_vet_enq_flags(). A scheduler can
smuggle internal flags such as SCX_ENQ_CLEAR_OPSS through the dsq move
kfuncs and corrupt the dispatch protocol. Move the rejection into
scx_vet_enq_flags(). The vtime move wrapper OR'd the internal
SCX_ENQ_DSQ_PRIQ bit into enq_flags before the vet; the bit now goes in
inside scx_dsq_move() after the vet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_bpf_now() couples the valid-or-fresh rq clock read to the current rq.
The read is useful for kernel-internal timing against a specific rq,
including a remotely locked one. Factor it out into __scx_bpf_now().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
set_task_slice(), task_unlink_from_dsq(), move_local_task_to_local_dsq(),
init_dsq() and dump_line() will be used outside ext.c. Add the scx_ prefix
and declare them in internal.h. The scx_sched_all list will also be used
outside ext.c, drop its static. No functional changes.
v2: Declare scx_sched_all outside the CONFIG_EXT_SUB_SCHED block - the
definition is unconditional. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The following rescue execution addition gives the function a third possible
destination, making a name that enumerates the outcomes a poor fit. Rename
to the destination-neutral scx_resolve_local_dsq(). No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The expansion serves little purpose and it can easily diverge.
Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260629-id_info-v2-5-56fccbe9c5ef@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Coherent<T>::write_to_slice() calculates a zero-byte copy when the file
offset is beyond the allocation, but still calls
UserSliceWriter::write_dma(). The latter rejects offsets beyond the
allocation even when the copy length is zero, so a debugfs read past EOF
returns -ERANGE.
Return before calling write_dma() when the offset is at or beyond the
allocation, matching simple_read_from_buffer() EOF semantics.
Fixes: 016818513936 ("rust: dma: implement BinaryWriter for Coherent<[u8]>")
Cc: stable@vger.kernel.org
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/291566-Library/topic/.E2.9C.94.20Possible.20past-EOF.20bug.20in.20Coherent.3CT.3E.3A.3Awrite_to_slice/near/611677095
Signed-off-by: Younes Akhouayri <git@younes.io>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Link: https://patch.msgid.link/20260730-fix-dma-coherent-eof-v2-1-8aff21054afa@younes.io
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In ngbe_irq_enable(), the code subsequently calls wx_intr_enable() to
enable interrupts. However, the preceding comment incorrectly stated
"mask interrupt", which means disabling or blocking interrupts.
This patch corrects the comment to "unmask interrupt" to accurately
reflect the actual behavior of the code. No functional changes are
introduced.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/147244C2750FF990+20260730065409.50807-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The destination of an alias is always another register, i.e. a `struct`
type. Replace the `ident` fragment with a `path` one in the internal
rules: `path` is more accurate, and allows referencing registers using a
qualified path instead of only identifiers visible from the current
module.
This covers all aliases, except the relative register ones which are to
be removed soon.
The public rule cannot be updated yet because a `+` can still be matched
after the alias; add a TODO item to update it after relative registers
are removed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260724-registers_fix-v2-3-a0fb58b02185@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A few arguments passed to internal rules are never used and just add
unneeded complexity. Remove them to simplify the rules a bit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260724-registers_fix-v2-2-a0fb58b02185@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A couple of shortcut rules redispatch an already normalized declaration
through the public register! entry point. This is unneeded - the public
rule should only be invoked by users.
Dispatch directly to the appropriate internal @reg rule instead.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260724-registers_fix-v2-1-a0fb58b02185@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The config fragment already sets CONFIG_UDMABUF=y, but kconfig silently
drops it. UDMABUF/NET_DEVMEM both depend on DMA_SHARED_BUFFER, which we
can't enable directly, so we need to enable a config that selects it. We
use SYNC_FILE for that purpose here.
Additionally, we flip on CONFIG_NET_DEVMEM as well.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260731-selftests-devmem-config-v1-1-098014348d9d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
uclogic_remove() cancels the pen in-range timer and then stops the
device:
timer_delete_sync(&drvdata->inrange_timer);
hid_hw_stop(hdev);
timer_delete_sync() only guarantees the timer is idle at that instant.
uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop()
stops the transport several lines later, and every report with
pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:
mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));
A report landing between the timer_delete_sync() call and the transport
teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled.
uclogic_remove() then returns and the devm drvdata is freed, while
hid_hw_stop() has already freed the input device drvdata->pen_input
points at, so when the timer fires ~100 ms later
uclogic_inrange_timeout() dereferences freed memory -- a use-after-free
in timer-softirq context.
Swapping the two calls is not a fix: stopping the device first frees
drvdata->pen_input via hidinput_disconnect() while the timer may still
be pending, so a timer already armed before removal fires on the freed
input device in the window before timer_delete_sync() runs.
Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the
timer, waits for a running callback while pen_input is still valid, and
prevents any further re-arming -- a later mod_timer() from an in-flight
report is silently ignored -- so the timer is provably dead before
hid_hw_stop() frees the inputs. This is the ordering the timer core
documents for this "timer re-armed from another path" teardown case.
Fixes: 01309e29eb95 ("HID: uclogic: Support in-range reporting emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
p_bools.nprim comes from the policy image independently of how many
booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at
value - 1, so a count larger than the values present leaves NULL entries.
Every user of that array then walks it by index and dereferences each
entry: cond_evaluate_expr() on the access-vector path,
security_get_bools() and security_get_bool_value() behind selinuxfs, and
security_set_bools(). A sparse class value is absorbed by
policydb_class_isvalid() and its siblings; booleans have no such
predicate, and no consumer that could use one.
Reject a boolean value that no boolean defines, once, where the array is
built. Conforming policies define every boolean they declare and are
unaffected.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
security_get_classes() sizes an array by p_classes.nprim and fills it at
value - 1, so a class value the policy never defines leaves a NULL.
sel_make_classes() passes every entry to sel_make_dir(), reaching the same
d_alloc_name() dereference as the permission array. The class symbol table
is allowed to be sparse (policydb_class_isvalid() exists to absorb that),
but this getter builds its own array straight from the hash table and has
no such predicate.
Fail the lookup when a value went unclaimed instead of handing out the
NULL. Conforming policies define every class they declare and are
unaffected.
Cc: stable@vger.kernel.org
Fixes: 55fcf09b3fe4 ("selinux: add support for querying object classes and permissions from the running policy")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
security_get_permissions() sizes an array by the class's permissions.nprim
and fills it at value - 1, from the inherited common's permission table and
then the class's own. A value no permission defines leaves a NULL that
sel_make_perm_files() passes to d_alloc_name(), an oops inside
sel_write_load() that strands selinux_state.policy_mutex and leaves every
later load in uninterruptible sleep; two permissions sharing a value
overwrite the first kstrdup(). Bounding each value by nprim catches
neither, and neither would a count: the symbol table is keyed on the
permission name, so duplicates pass.
Track the values each permission table claims and require them to cover
exactly what its count declares, rejecting a count no value can reach.
Conforming policies are unaffected.
Cc: stable@vger.kernel.org
Fixes: 55fcf09b3fe4 ("selinux: add support for querying object classes and permissions from the running policy")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes()
fails, and that helper dereferences the outgoing policy to cancel its
sidtab conversion. On the first policy load there is no outgoing policy:
security_load_policy() returns early for that case, before it converts
anything, and state->policy is still NULL. A first load that fails while
building the selinuxfs tree therefore takes a NULL dereference in
selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load.
Skip the cancel when there is no old policy, mirroring the check
security_load_policy() already makes before it converts.
Cc: stable@vger.kernel.org
Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte
supplied by the device in its REPORT_EE_DATA reply -- clamped only to
the caller's read() count:
ret = resp->raw_data[2];
if (ret > s)
ret = s;
if (copy_to_user(u, resp->raw_data+3, ret))
It never checks resp->raw_size, the number of bytes picolcd_raw_event()
actually copied into the 64-byte raw_data[] of the kmalloc'd struct
picolcd_pending. A device (or a spoofed picoLCD) returning a length byte
of 0xff, read with a count >= 255, makes copy_to_user() read past
raw_data[] into adjacent slab memory and return it to userspace through
the debugfs "eeprom" file:
BUG: KASAN: slab-out-of-bounds in _copy_to_user
Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd]
The debug-dump path in the same file already validates the device length
byte against the received size before trusting it; this read does not.
The file is created S_IRUSR (root-only) and a crafted device is needed,
so it is neither unprivileged- nor remotely-triggerable.
Clamp the copy length to resp->raw_size - 3 (the payload actually
received, minus the 3-byte header), floored at 0 for short replies.
Fixes: 9bbf2b98ba11 ("HID: add experimental access to PicoLCD device's EEPROM and FLASH")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The T2-attached butterfly keyboard backlight is exposed as
apple::kbd_backlight. This leaves the color field empty and gives
userspace a model-specific name for the same white keyboard-backlight
function exposed by Magic Keyboards.
Magic Keyboard backlight support was added later and already follows the
current LED naming convention. As a result, userspace has to handle two
different names for the same function.
We should use :white:kbd_backlight for both implementations. This follows
the LED color and function naming convention and lets userspace discover
either keyboard generation without a special case for the butterfly
models.
Signed-off-by: Andre Eikmeyer <dev@deq.rocks>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The T2 virtual USB host controller re-enumerates the internal keyboard
after system resume. The butterfly keyboard backlight currently uses
LED_CORE_SUSPENDRESUME, so the LED core sends a blocking request to the
old HID device while it is disappearing. That request fails with -ENODEV
and the newly probed device starts with its backlight off.
To fix this, we cache the requested brightness when the old HID device is
removed and restore it when the replacement is probed. We let
re-enumeration handle restoration instead of issuing a request through the
stale device.
Fixes: 1f95a6cd5ad7 ("HID: apple: ensure the keyboard backlight is off if suspending")
Cc: stable@vger.kernel.org
Signed-off-by: Andre Eikmeyer <dev@deq.rocks>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The internal eDP panel of the Microsoft Surface Pro 12in 1st Edition
(Snapdragon X Plus, X1P42100) is not in edp_panels[], so every boot
produces the deliberate WARN_ON splat in panel_edp_probe() and the panel
falls back to conservative timings:
WARNING: drivers/gpu/drm/panel/panel-edp.c:814 panel_edp_probe+0x53c/0x56c
panel-simple-dp-aux aux-aea0000.displayport-controller:
Unknown panel SHP 0x15a7, using conservative timings
EDID, read over the panel's DP AUX DDC bus:
00 ff ff ff ff ff ff 00 4d 10 a7 15 a0 00 00 1f
31 22 01 04 a5 19 11 78 07 ee 91 a3 54 4c 99 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 62 53 94 a0 80 b8 2e 50 18 10
3a 00 fe a9 00 00 00 18 13 7d 94 a0 80 b8 2e 50
18 10 3a 00 fe a9 00 00 00 18 00 00 00 fd 00 18
5a 88 88 21 01 00 00 00 00 00 00 00 00 00 00 fc
00 4c 51 31 32 30 50 31 4a 58 35 31 0a 20 00 69
Manufacturer: SHP
Model: 0x15a7
Made in: week 49 of 2024
Display Product Name: 'LQ120P1JX51'
DTD 1: 2196x1464 60.001799 Hz 3:2 (254 mm x 169 mm)
DTD 2: 2196x1464 90.002698 Hz 3:2 (254 mm x 169 mm)
Timings are deliberately cautious rather than datasheet-derived. The
conservative fallback sets unprepare=2000 and enable=200; unprepare=2000
is a safety margin for unknown panels only and is the single occurrence
of that value in the file -- no real panel entry uses it.
delay_200_500_e200 keeps the same generous 200 ms enable delay while
using the 500 ms unprepare shared by every actual panel in the table. A
shorter enable delay may well be fine, but has not been validated here.
Signed-off-by: François Roux <info@humanlearning.ch>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260802135107.4420-1-info@humanlearning.ch
|
|
Some ISH firmware versions (observed on Tiger Lake LP, 8086:a0fc,
GUID {33AECD58-B679-4E54-9BD9-A04D34F0C226}) periodically re-send an
unsolicited HOSTIF_DM_ENUM_DEVICES response roughly every 79 seconds.
The current guard collapses two distinct cases into one condition:
if (!(response_flag) || init_done) -> bad packet + ish_hw_reset
This incorrectly treats a valid post-init firmware announcement as a
corrupted packet, triggering an ISH soft-reset and a full ISHTP
re-initialisation cycle on each occurrence (~1100 times per day on
affected hardware).
Split the check: reject messages with no response flag as before, but
simply discard valid ENUM_DEVICES messages that arrive after init is
complete.
Signed-off-by: Wahid Khan <wahidzk0091@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values.
Fixes: f469bde9afd1 ("hwmon: (pmbus/core) Notify hwmon events")
Cc: Vincent Jardin <vjardin@free.fr>
Tested-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
pmbus_write_smbalert_mask() is not guarded, which can cause race conditions
with concurrent sysfs attribute accesses.
Similar, PMBus accesses in pmbus_init_debugfs() are not guarded, also
resulting in potential race conditions.
Add guards to both functions to prevent the races.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 221819ca4c36e ("hwmon: (pmbus/core) Add interrupt support")
Fixes: 1e069dfd96dfe ("hwmon: (pmbus) Add debugfs for status registers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
arm_spe__alloc_metadata() reads nr_cpu from the auxtrace_info priv
array without validation. When a crafted perf.data provides nr_cpu=0,
the per_cpu_sz calculation divides by zero:
per_cpu_sz = (metadata_size - (hdr_sz * sizeof(u64))) / (*nr_cpu);
Reject nr_cpu <= 0 early, before the division. The caller already
treats NULL return with metadata_ver != 1 as a parse failure.
Fixes: 7842a4b6ff698 ("perf arm-spe: Support metadata version 2")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Same pattern as the Intel PT fix: min_sz is set to
sizeof(u64) * INTEL_BTS_SNAPSHOT_MODE, but the code accesses
auxtrace_info->priv[INTEL_BTS_SNAPSHOT_MODE], which requires at least
INTEL_BTS_SNAPSHOT_MODE + 1 elements.
Use (INTEL_BTS_SNAPSHOT_MODE + 1) to ensure the highest accessed index
is within bounds.
Fixes: d0170af7004dce9c ("perf tools: Add Intel BTS support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
min_sz is set to sizeof(u64) * INTEL_PT_PER_CPU_MMAPS, but the code
accesses auxtrace_info->priv[INTEL_PT_PER_CPU_MMAPS], which requires
at least INTEL_PT_PER_CPU_MMAPS + 1 elements. A file with exactly
min_sz bytes of priv data passes the size check but the access reads
one u64 past the validated region.
Use (INTEL_PT_PER_CPU_MMAPS + 1) to ensure the highest accessed index
is within bounds.
Fixes: 90e457f7be087005 ("perf tools: Add Intel PT support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
auxtrace_queues__grow() has two bugs:
1. When idx is UINT_MAX, the caller passes new_nr_queues = idx + 1 = 0.
The function skips growing (since any nr_queues >= 0), returns
success, and the caller accesses queue_array[UINT_MAX] — an OOB
heap write. Fix by rejecting new_nr_queues == 0 up front.
2. The function allocates a new queue_array via calloc and copies
elements from the old array, but never frees the old array. Fix
by saving the old pointer and freeing it after the copy.
Fixes: e502789302a6ece9 ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
thread_stack__br_sample() copies the wrap-around portion of the branch
stack ring buffer with:
nr = min(ts->br_stack_pos, sz);
memcpy(be, &src->entries[0], bsz * ts->br_stack_pos);
'nr' is correctly bounded to min(br_stack_pos, sz) but the memcpy uses
the unbounded ts->br_stack_pos directly. When br_stack_pos exceeds
the remaining destination space 'sz', this writes past the destination
buffer.
Use 'nr' (the bounded value) in the memcpy size, matching the pattern
of the first memcpy in the same function.
Fixes: 86d67180b920 ("perf thread-stack: Add branch stack support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Adds intensity adjustment for the left and right rumble motors.
Claude was used during the reverse-engineering data gathering for this
feature done by Zhouwang Huang. As the code had already been affected,
I used Claude to create the initial framing for the feature, then did
manual cleanup of the _show and _store functions afterwards to fix bugs
and keep the coding style consistent. Claude was also used as an initial
reviewer of this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Link: https://patch.msgid.link/20260529072111.7565-5-derekjohn.clark@gmail.com
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds RGB control interface for MSI Claw devices. The MSI Claw uses a
fairly unique RGB interface. It has 9 total zones (4 per joystick ring
and 1 for the ABXY buttons), and supports up to 8 sequential frames of
RGB zone data. Each frame is written to a specific area of MCU memory by
the profile command, the value of which changes based on the firmware of
the device. Unlike other devices (such as the Legion Go or the OneXPlayer
devices), there are no hard coded effects built into the MCU. Instead,
the basic effects are provided as a series of frame data. I have
mirrored the effects available in Windows in this driver, while keeping
the effect names consistent with the Lenovo drivers for the effects that
are similar.
Initial reverse-engineering and implementation of this feature was done
by Zhouwang Huang. I refactored the overall format to conform to kernel
driver best practices and style guides. Claude was used as an initial
reviewer of this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Link: https://patch.msgid.link/20260529072111.7565-4-derekjohn.clark@gmail.com
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds attributes that allow for remapping the M-keys with up to 5 values
when in macro mode. There are 2 mappable buttons on the rear of the
device, M1 on the right and M2 on the left. When mapped, the events will
fire from one of three event devices: gamepad buttons will fire from the
device handled by xpad, while keyboard and mouse events will fire from
respectively typed evdevs provided by the input core. Names of each
mapping have been kept as close to the event that will fire from the evdev
as possible, with context added to the ABS_ events on the direction of the
movement.
Initial reverse-engineering and implementation of this feature was done
by Zhouwang Huang. I refactored the overall format to conform to kernel
driver best practices and style guides. Claude was used as an initial
reviewer of this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Link: https://patch.msgid.link/20260529072111.7565-3-derekjohn.clark@gmail.com
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds configuration HID driver for the MSI Claw series of handheld PC's.
In this initial patch add the initial driver outline and attributes for
changing the gamepad mode, M-key behavior, and add a WO reset function.
Sending the SWITCH_MODE and RESET commands causes a USB disconnect in
the device. The completion will therefore never get hit and would trigger
an -EIO. To avoid showing the user an error for every write to these
attrs a bypass for the completion handling is introduced when timeout ==
0.
The initial version of this patch was written by Denis Benato, which
contained the initial reverse-engineering and implementation for the
gamepad mode switching. This work was later expanded by Zhouwang Huang
to include more gamepad modes. Finally, I refactored the drivers data
in/out flow and overall format to conform to kernel driver best
practices and style guides. Claude was used as an initial reviewer of
this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The tap-to-mute button of the HyperX QuadCast 2 (03f0:07b4) is handled
entirely in the device firmware. The firmware gates the audio internally
but never sends the Telephony "Phone Mute" usage (0x2f) that its own report
descriptor advertises, and it does not touch the UAC feature unit either.
Consequently neither an evdev key event nor an ALSA mixer change is ever
generated, and userspace has no way to learn that the microphone was muted:
desktops keep showing the microphone as live, and conferencing applications
keep displaying an unmuted microphone while transmitting silence.
The mute state is reported through a vendor-defined collection instead:
06 c0 ff Usage Page (Vendor-Defined 0xFFC0)
a1 01 Collection (Application)
06 c1 ff Usage Page (Vendor-Defined 0xFFC1)
85 77 Report ID (0x77)
09 f0 Usage (0xF0)
75 08 95 3f Report Size (8), Report Count (63)
81 02 Input (Data,Var,Abs)
Pressing the button emits a 64-byte report on that collection:
77 06 00 00 ... microphone unmuted
77 06 01 00 ... microphone muted
where byte 1 identifies the mute event and byte 2 carries the resulting
state. As the payload is an opaque vendor blob carrying no HID usages,
hid-input cannot map it and a hwdb entry cannot express it either.
Add a driver that decodes the report and emits KEY_MICMUTE, which makes the
button behave like any other microphone mute key.
Note that the device reports the resulting absolute state, whereas
KEY_MICMUTE is a momentary key that userspace acts on as a toggle, so the
driver emits one keypress per state change.
Tested on a HyperX QuadCast 2 (03f0:07b4).
Signed-off-by: Benjamin Blume <benjaminblume@posteo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Arctis Nova 5X, Nova 7 Gen2, and Nova 7 2026 refresh headsets answer
status polls, but also send unsolicited battery and connection updates
on a second HID interface (interface 5). Use that interface through
async_interface so the driver does not have to poll. Add request and
parse helpers for the Nova status format (0xb0/0xb7/0xb9/0xbb opcodes).
The original (pre-Gen2) Arctis Nova 7 family answers the same status
opcodes on the same interfaces, but reports battery capacity as a
discrete 0-4 level instead of a raw percentage. Add a second parse
function that maps that level through steelseries_map_capacity(), and a
separate device_info so the two capacity encodings cannot get mixed up.
Add the fourteen USB product IDs that share these protocols:
0x2253 Arctis Nova 5X
0x2202 Arctis Nova 7
0x2206 Arctis Nova 7X
0x22a4 Arctis Nova 7X (alternate PID)
0x223a Arctis Nova 7 Diablo
0x227a Arctis Nova 7 World of Warcraft Edition
0x22a1 Arctis Nova 7 2026
0x22a7 Arctis Nova 7P 2026
0x22a5 Arctis Nova 7X 2026
0x22a9 Arctis Nova 7 Diablo 2026
0x227e Arctis Nova 7 Gen 2
0x2258 Arctis Nova 7X Gen 2
0x229e Arctis Nova 7X Gen 2 (alternate PID)
0x22ad Arctis Nova 7X Gen 2 (alternate PID)
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some headsets expose a second HID interface that sends battery and
connection updates on its own. Watching that interface lets the driver
stop polling the sync interface. Add a
steelseries_device_info::async_interface field and the code to handle
it:
- The driver binds both the sync and async interfaces. The async
interface shares the steelseries_device created by the sync
interface. It finds the sibling with usb_ifnum_to_if(), and before
trusting its intfdata it rejects non-HID siblings by descriptor
class and holds the sibling's device lock across the lookup, so a
crafted device cannot cause a type-confused read and a concurrent
unbind cannot free the hid_device from under it. It then takes a
reference and returns -EPROBE_DEFER until the sync interface has
probed. If the sync interface never binds, the async interface
defers forever, which is fine here.
- raw_event() now holds sd->lock and re-checks sd->removed so events
on either interface are serialised against removal.
- status_work runs once for async devices instead of rearming. A
single status request is sent when the headset connects to get the
initial battery level.
No device sets async_interface yet. This is the infrastructure for the
next commit.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The next change shares one steelseries_device between two HID
interfaces, so the state can outlive either interface. Stop using devm
for it. Reference count the struct with a kref and free it from
steelseries_device_release(). Register and unregister the power supply
explicitly, and clear sd->battery under sd->lock in remove() so it is
not touched after it is unregistered.
Drop the global atomic battery counter and name the power supply after
the device (hdev->uniq, or dev_name() when empty), as hid-input and the
other HID battery drivers do.
No functional change for the current single-interface devices.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Map the Arctis 9 raw battery value over 0x64 (empty) to 0x9a (full)
instead of 0x68 to 0x9d. These values match the HeadsetControl project
[1] and fit the calibration points from an independent reverse
engineering of the battery tray (about 25% at raw 112, 50% at raw 125)
[2].
I do not have this headset. The values come from those references and
were not measured directly.
[1] https://github.com/Sapd/HeadsetControl/blob/master/lib/devices/steelseries_arctis_9.hpp
[2] https://magnier.io/reverse-engineering-arctis-9-battery-tray/
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Report POWER_SUPPLY_STATUS_FULL when the headset is connected, charging,
and at 100% capacity. It reported CHARGING in that case before.
The charging flag doubles as a power-present signal: the headset keeps
reporting charging while it sits docked at 100%, and clears the flag as
soon as it runs on battery. Gating FULL on the charging flag therefore
avoids reporting FULL for an unplugged headset that merely happens to be
at 100%, which would otherwise hide the discharge state from userspace.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Replace the per-product if/else quirk bitmap with a
steelseries_device_info struct. Each model provides its capabilities,
sync_interface, and request_status/parse_status callbacks. Report
sending is folded into steelseries_send_report() and the feature and
output wrappers, and the battery identifiers lose their per-model names.
This is mostly a refactor, but it changes two things:
- Battery status is polled from a periodic delayed work (status_work)
instead of being requested from raw_event(). The interval stays at
3s.
- Arctis 1 no longer clamps the reported capacity to 100% while
disconnected. The connection state already controls how this is
shown to userspace.
ARCTIS_1_X and ARCTIS_9 keep working. No new devices are added.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Move all Arctis headset code (battery monitoring, wireless status,
power supply registration, raw event handling) from hid-steelseries.c
into the new hid-steelseries-arctis.c driver module.
hid-steelseries.c keeps the SRWS1 racing wheel and the MSI RGB LED
devices, while hid-steelseries-arctis.c handles the Arctis 1 (Xbox) and
Arctis 9 wireless headsets with their own device table, probe, remove,
and raw_event implementations.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The SteelSeries Arctis 1 Wireless for Xbox (0x12b6) was labelled as the
plain Arctis 1 Wireless. Rename USB_DEVICE_ID_STEELSERIES_ARCTIS_1 to
USB_DEVICE_ID_STEELSERIES_ARCTIS_1_X, along with the matching quirk flag
and device table entry. The device ID value is unchanged.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Key changes include:
- Translated management-style.rst into and adapted idiomatic expressions
and humor to sound natural in Brazilian Portuguese while maintaining
the original tone.
Signed-off-by: Amanda Corrêa <amandacorreasilvax@gmail.com>
Acked-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260704202831.112653-1-amandacorreasilvax@gmail.com>
|
|
When the Apple Magic Trackpad 2 (USB) is reset across a power transition
(e.g. resume from hibernation) it drops out of multitouch mode: it keeps
sending report ID 0x02 on its HID_TYPE_USBMOUSE interface, but the packet
shrinks from 21 to 8 bytes and the trackpad2 handler drops it (size < 12).
Clicks still work but pointer motion is lost until the device is re-plugged
or the driver reloaded.
Re-enable multitouch from .reset_resume via the workqueue. Only
.reset_resume is needed; suspend-to-idle keeps the device powered and
retains multitouch.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Assisted-by: Claude-Code:claude-opus-4-8
Signed-off-by: Christopher Kodama <ckhordiasma@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull fsverity fix from Eric Biggers:
"Fix a regression where truncating a file with fsverity enabled started
being allowed on kernels without fsverity support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fs,fsverity: remove check for fsverity being enabled in setattr_prepare()
|
