| Age | Commit message (Collapse) | Author |
|---|
|
Add tests for the new CLONE_NNP flag:
- nnp_sets_no_new_privs: Verify a child created with CLONE_NNP has
no_new_privs set while the parent does not.
- nnp_rejects_thread: Verify CLONE_NNP | CLONE_THREAD is rejected
with -EINVAL since threads share credentials.
- autoreap_no_new_privs_unset: Verify a plain CLONE_AUTOREAP child
does not get no_new_privs.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-5-d148b984a989@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add tests for the new CLONE_AUTOREAP clone3() flag:
- autoreap_without_pidfd: CLONE_AUTOREAP without CLONE_PIDFD works
(fire-and-forget)
- autoreap_rejects_exit_signal: CLONE_AUTOREAP with non-zero
exit_signal fails
- autoreap_rejects_parent: CLONE_AUTOREAP with CLONE_PARENT fails
- autoreap_rejects_thread: CLONE_AUTOREAP with CLONE_THREAD fails
- autoreap_basic: child exits, pidfd poll works, PIDFD_GET_INFO returns
correct exit code, waitpid() returns -ECHILD
- autoreap_signaled: child killed by signal, exit info correct via pidfd
- autoreap_reparent: autoreap grandchild reparented to subreaper still
auto-reaps
- autoreap_multithreaded: autoreap process with sub-threads auto-reaps
after last thread exits
- autoreap_no_inherit: grandchild forked without CLONE_AUTOREAP becomes
a regular zombie
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-4-d148b984a989@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the global cgroup_file_kn_lock with a per-cgroup_file spinlock
to eliminate cross-cgroup contention as it is not really protecting
data shared between different cgroups.
The lock is initialized in cgroup_add_file() alongside timer_setup().
No lock acquisition is needed during initialization since the cgroup
directory is being populated under cgroup_mutex and no concurrent
accessors exist at that point.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add lockless checks before acquiring cgroup_file_kn_lock:
1. READ_ONCE(cfile->kn) NULL check to skip torn-down files.
2. READ_ONCE(cfile->notified_at) rate-limit check to skip when
within the notification interval. If within the interval, arm
the deferred timer via timer_reduce() and confirm it is pending
before returning -- if the timer fired in between, fall through
to the lock path so the notification is not lost.
Both checks have safe error directions -- a stale read can only
cause unnecessary lock acquisition, never a missed notification.
The critical section is simplified to just taking a kernfs_get()
reference and updating notified_at.
Annotate cfile->kn and cfile->notified_at write sites with
WRITE_ONCE() to pair with the lockless readers.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
cgroup_file_notify() calls kernfs_notify() while holding the global
cgroup_file_kn_lock. kernfs_notify() does non-trivial work including
wake_up_interruptible() and acquisition of a second global spinlock
(kernfs_notify_lock), inflating the hold time.
Take a kernfs_get() reference under the lock and call kernfs_notify()
after dropping it, following the pattern from cgroup_file_show().
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add a new clone3() flag CLONE_PIDFD_AUTOKILL that ties a child's
lifetime to the pidfd returned from clone3(). When the last reference to
the struct file created by clone3() is closed the kernel sends SIGKILL
to the child. A pidfd obtained via pidfd_open() for the same process
does not keep the child alive and does not trigger autokill - only the
specific struct file from clone3() has this property.
This is useful for container runtimes, service managers, and sandboxed
subprocess execution - any scenario where the child must die if the
parent crashes or abandons the pidfd.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD (the whole point is tying
lifetime to the pidfd file) and CLONE_AUTOREAP (a killed child with no
one to reap it would become a zombie). CLONE_THREAD is rejected because
autokill targets a process not a thread.
The clone3 pidfd is identified by the PIDFD_AUTOKILL file flag set on
the struct file at clone3() time. The pidfs .release handler checks this
flag and sends SIGKILL via do_send_sig_info(SIGKILL, SEND_SIG_PRIV, ...)
only when it is set. Files from pidfd_open() or open_by_handle_at() are
distinct struct files that do not carry this flag. dup()/fork() share the
same struct file so they extend the child's lifetime until the last
reference drops.
CLONE_PIDFD_AUTOKILL uses a privilege model based on CLONE_NNP: without
CLONE_NNP the child could escalate privileges via setuid/setgid exec
after being spawned, so the caller must have CAP_SYS_ADMIN in its user
namespace. With CLONE_NNP the child can never gain new privileges so
unprivileged usage is allowed. This is a deliberate departure from the
pdeath_signal model which is reset during secureexec and commit_creds()
rendering it useless for container runtimes that need to deprivilege
themselves.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-3-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new clone3() flag CLONE_NNP that sets no_new_privs on the child
process at clone time. This is analogous to prctl(PR_SET_NO_NEW_PRIVS)
but applied at process creation rather than requiring a separate step
after the child starts running.
CLONE_NNP is rejected with CLONE_THREAD. It's conceptually a lot simpler
if the whole thread-group is forced into NNP and not have single threads
running around with NNP.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-2-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new clone3() flag CLONE_AUTOREAP that makes a child process
auto-reap on exit without ever becoming a zombie. This is a per-process
property in contrast to the existing auto-reap mechanism via
SA_NOCLDWAIT or SIG_IGN for SIGCHLD which applies to all children of a
given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped property
affecting all children which makes it unsuitable for libraries or
applications that need selective auto-reaping of specific children while
still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's signal_struct.
When the child exits do_notify_parent() checks this flag and causes
exit_notify() to transition the task directly to EXIT_DEAD. Since the
flag lives on the child it survives reparenting: if the original parent
exits and the child is reparented to a subreaper or init the child still
auto-reaps when it eventually exits.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent to
monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern where the parent simply doesn't care about the child's exit
status. No exit signal is delivered so exit_signal must be zero.
CLONE_AUTOREAP is rejected in combination with CLONE_PARENT. If a
CLONE_AUTOREAP child were to clone(CLONE_PARENT) the new grandchild
would inherit exit_signal == 0 from the autoreap parent's group leader
but without signal->autoreap. This grandchild would become a zombie that
never sends a signal and is never autoreaped - confusing and arguably
broken behavior.
The flag is not inherited by the autoreap process's own children. Each
child that should be autoreaped must be explicitly created with
CLONE_AUTOREAP.
Link: https://github.com/uapi-group/kernel-features/issues/45
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-1-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DesignWare I3C master driver creates a virtual I2C adapter to
provide backward compatibility with I2C devices. However, the current
implementation does not associate this virtual adapter with any
Device Tree node.
Propagate the of_node from the I3C master platform device to the
virtual I2C adapter's device structure. This ensures that standard
I2C aliases are correctly resolved and bus numbering remains consistent.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260302075645.1492766-1-peteryin.openbmc@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Now that the EDAC core allows the registration of read-only attributes,
make use of that in the mpc85xx driver.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260223-sysfs-const-edac-v1-7-3ff0b87249e7@weissschuh.net
|
|
The generic EDAC sysfs code does not need to modify these structs.
Allow the drivers to add read-only ones.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260223-sysfs-const-edac-v1-6-3ff0b87249e7@weissschuh.net
|
|
Explain these atomic flags to improve code readability. For example, the
flag IMA_DIGSIG is to indicate we mustn't update a file's security.ima
on close because the file already has IMA signature. The code comments
for the first three flags come from commit 0d73a55208e9 ("ima:
re-introduce own integrity cache lock") with a minor tweak.
Signed-off-by: Coiby Xu <coxu@redhat.com>
[zohar@linux.ibm.com: remove duplicate "integrity violation", unnecessary commas]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
These structures are never modified, mark them read-only.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260223-sysfs-const-edac-v1-5-3ff0b87249e7@weissschuh.net
|
|
These structures are never modified, mark them read-only.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260223-sysfs-const-edac-v1-4-3ff0b87249e7@weissschuh.net
|
|
These casts assume that the struct attribute is at the beginning of struct
edac_dev_sysfs_block_attribute. This is can silently break if the field is
moved, either manually or through struct randomization.
Use proper member syntax to get the field address and drop the casts.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260223-sysfs-const-edac-v1-3-3ff0b87249e7@weissschuh.net
|
|
Disruption of the MIPI I3C HCI controller's internal state can cause
i3c_hci_bus_disable() to fail when attempting to shut down the bus.
In the code paths where bus disable is invoked - bus clean-up and runtime
suspend - the controller does not need to remain operational afterward, so
a full controller reset is a safe recovery mechanism.
Add a fallback to issue a software reset when disabling the bus fails.
This ensures the bus is reliably halted even if the controller's state
machine is stuck or unresponsive.
The fallback is used both during bus clean-up and in the runtime suspend
path. In the latter case, ensure interrupts are quiesced after reset.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Shared interrupts may fire unexpectedly, including during periods when the
controller is not yet fully initialized. Commit b9a15012a1452
("i3c: mipi-i3c-hci: Add optional Runtime PM support") addressed this issue
for the runtime-suspended state, but the same problem can also occur before
the bus is enabled for the first time.
Ensure the IRQ handler ignores interrupts until initialization is complete
by making consistent use of the existing irq_inactive flag. The flag is
now set to false immediately before enabling the bus.
To guarantee correct ordering with respect to the IRQ handler, protect
all transitions of irq_inactive with the same spinlock used inside the
handler.
Fixes: b8460480f62e1 ("i3c: mipi-i3c-hci: Allow for Multi-Bus Instances")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA ring halts whenever a transfer encounters an error. The interrupt
handler previously attempted to detect this situation and restart the ring
if a transfer completed at the same time. However, this restart logic runs
entirely in interrupt context and is inherently racy: it interacts with
other paths manipulating the ring state, and fully serializing it within
the interrupt handler is not practical.
Move this error-recovery logic out of the interrupt handler and into the
transfer-processing path (i3c_hci_process_xfer()), where serialization and
state management are already controlled. Introduce a new optional I/O-ops
callback, handle_error(), invoked when a completed transfer reports an
error. For DMA operation, the implementation simply calls the existing
dequeue function, which safely aborts and restarts the ring when needed.
This removes the fragile ring-restart logic from the interrupt handler and
centralizes error handling where proper sequencing can be ensured.
Fixes: ccdb2e0e3b00d ("i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Several parts of the MIPI I3C HCI driver duplicate the same sequence for
queuing a transfer, waiting for completion, and handling timeouts. This
logic appears in five separate locations and will be affected by an
upcoming fix.
Refactor the repeated code into a new helper, i3c_hci_process_xfer(), and
store the timeout value in the hci_xfer structure so that callers do not
need to pass it as a separate parameter.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA dequeue path attempts to restart the ring after aborting an
in-flight transfer, but the current sequence is incomplete. The controller
must be brought out of the aborted state and the ring control registers
must be programmed in the correct order: first clearing ABORT, then
re-enabling the ring and asserting RUN_STOP to resume operation.
Add the missing controller resume step and update the ring control writes
so that the ring is restarted using the proper sequence.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The internal control command descriptor used for no-op commands includes a
Transaction ID (TID) field, but the no-op command constructed in
hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a
no-op descriptor without the expected TID.
This bug has gone unnoticed because the TID is currently not validated in
the no-op completion path, but the descriptor format requires it to be
present.
Add the missing TID field when generating a no-op descriptor so that its
layout matches the defined command structure.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA ring bookkeeping in the MIPI I3C HCI driver is updated from two
contexts: the DMA ring dequeue path (hci_dma_dequeue_xfer()) and the
interrupt handler (hci_dma_xfer_done()). Both modify the ring's
in-flight transfer state - specifically rh->src_xfers[] and
xfer->ring_entry - but without any serialization. This allows the two
paths to race, potentially leading to inconsistent ring state.
Serialize access to the shared ring state by extending the existing
spinlock to cover the DMA dequeue path and the entire interrupt handler.
Since the core IRQ handler now holds this lock, remove the per-function
locking from the PIO and DMA sub-handlers.
Additionally, clear the completed entry in rh->src_xfers[] in
hci_dma_xfer_done() so it cannot be matched or completed again.
Finally, place the ring restart sequence under the same lock in
hci_dma_dequeue_xfer() to avoid concurrent enqueue or completion
operations while the ring state is being modified.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The I3C subsystem allows multiple transfers to be queued concurrently.
However, the MIPI I3C HCI driver's DMA enqueue path, hci_dma_queue_xfer(),
lacks sufficient serialization.
In particular, the allocation of the enqueue_ptr and its subsequent update
in the RING_OPERATION1 register, must be done atomically. Otherwise, for
example, it would be possible for 2 transfers to be allocated the same
enqueue_ptr.
Extend the use of the existing spinlock for that purpose. Keep a count of
the number of xfers enqueued so that it is easy to determine if the ring
has enough space.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI driver currently uses separate spinlocks for different
contexts (PIO vs. DMA rings). This split is unnecessary and complicates
upcoming fixes. The driver does not support concurrent PIO and DMA
operation, and it only supports a single DMA ring, so a single lock is
sufficient for all paths.
Introduce a unified spinlock in struct i3c_hci, switch both PIO and DMA
code to use it, and remove the per-context locks.
No functional change is intended in this patch.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for fixing a race in the DMA ring enqueue path when handling
parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer()
and into a new helper that performs the mapping up front.
This refactoring allows the upcoming fix to extend the spinlock coverage
around the enqueue operation without performing DMA mapping under the
spinlock.
No functional change is intended in this patch.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI host controller driver does not implement Hot-Join
handling, yet Hot-Join response control defaults to allowing devices to
Hot-Join the bus. Configure HC_CONTROL_HOT_JOIN_CTRL to NACK all Hot-Join
attempts.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI driver currently returns -ETIME for various timeout
conditions, while other I3C master drivers consistently use -ETIMEDOUT
for the same class of errors. Align the HCI driver with the rest of the
subsystem by replacing all uses of -ETIME with -ETIMEDOUT.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Several demo schedulers and the selftest runner had usage strings
that omitted options which are actually supported:
- scx_central: add missing [-v]
- scx_pair: add missing [-v]
- scx_qmap: add missing [-S] and [-H]
- scx_userland: add missing [-v]
- scx_sdt: remove [-f] which no longer exists
- runner.c: add missing [-s], [-l], [-q]; drop [-h] which none of the
other sched_ext tools list in their usage lines
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
perf_event__synthesize_modules() allocates a single union perf_event and
reuses it across every kernel module callback.
After the first module is processed, perf_record_mmap2__read_build_id()
sets PERF_RECORD_MISC_MMAP_BUILD_ID in header.misc and writes that
module's build ID into the event.
On subsequent iterations the callback overwrites start, len, pid, and
filename for the next module but never clears the stale build ID fields
or the MMAP_BUILD_ID flag.
When perf_record_mmap2__read_build_id() runs for the second module it
sees the flag, reads the stale build ID into a dso_id, and
__dso__improve_id() permanently poisons the DSO with the wrong build ID.
Every module after the first therefore receives the first module's build
ID in its MMAP2 record.
On a system with the sunrpc and nfsd modules loaded, this causes perf
script and perf report to show [unknown] for all module symbols.
The latent bug has existed since commit d9f2ecbc5e47fca7 ("perf dso:
Move build_id to dso_id") introduced the PERF_RECORD_MISC_MMAP_BUILD_ID
check in perf_record_mmap2__read_build_id().
Commit 53b00ff358dc75b1 ("perf record: Make --buildid-mmap the default")
then exposed it to all users by making the MMAP2-with-build-ID path the
default. Both commits were merged in the same series.
Clear the MMAP_BUILD_ID flag and zero the build_id union before each
call to perf_record_mmap2__read_build_id() so that every module starts
with a clean slate.
Fixes: d9f2ecbc5e47fca7 ("perf dso: Move build_id to dso_id")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To make sure the display subsystem starts in a predictable state, we
need to reset it. Otherwise, unpredictable issues can happen, e.g.
on the xiaomi-laurel-sprout smartphone DSI would not work on boot.
Wire up the reset to fix.
Fixes: 0865d23a0226 ("arm64: dts: qcom: sm6125: Add display hardware nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Yedaya Katsman <yedaya.ka@gmail.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303034847.13870-7-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
To make sure the display subsystem starts in a predictable state, we
need to reset it. Otherwise, unpredictable issues can happen, e.g.
on the motorola-guamp smartphone DSI would not transmit anything.
Wire up the reset to fix.
Fixes: 705e50427d81 ("arm64: dts: qcom: sm6115: Add mdss/dpu node")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303034847.13870-6-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge the MDSS reset constants for SM6115 and SM6125 from topic branch
to get access to the constants.
|
|
The MDSS resets were left undescribed. Add them to allow resetting the
display subsystem, which is necessary to avoid issues caused by state
left over from the bootloader on various platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303034847.13870-5-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The MDSS resets were left undescribed. Add them to allow resetting the
display subsystem, which is necessary to avoid issues caused by state
left over from the bootloader on various platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303034847.13870-4-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge the definition of MDSS resets for SM6115 and SM6125 to allow them
to be made available in the DeviceTree branch.
|
|
Add the missing defines for MDSS resets, which are necessary to reset
the display subsystem in order to avoid issues caused by state left over
from the bootloader.
While here, align comment style with other SoCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20260303034847.13870-3-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing defines for MDSS resets, which are necessary to reset
the display subsystem in order to avoid issues caused by state left over
from the bootloader.
While here, align comment style with other SoCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20260303034847.13870-2-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY,
the boundary check for 128-byte SQE operations in io_init_req()
validated the logical SQ head position rather than the physical SQE
index.
The existing check:
!(ctx->cached_sq_head & (ctx->sq_entries - 1))
ensures the logical position isn't at the end of the ring, which is
correct for NO_SQARRAY rings where physical == logical. However, when
sq_array is present, an unprivileged user can remap any logical
position to an arbitrary physical index via sq_array. Setting
sq_array[N] = sq_entries - 1 places a 128-byte operation at the last
physical SQE slot, causing the 128-byte memcpy in
io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE
array.
Replace the cached_sq_head alignment check with a direct validation
of the physical SQE index, which correctly handles both sq_array and
NO_SQARRAY cases.
Fixes: 1cba30bf9fdd ("io_uring: add support for IORING_SETUP_SQE_MIXED")
Signed-off-by: Tom Ryan <ryan36005@gmail.com>
Link: https://patch.msgid.link/20260310052003.72871-1-ryan36005@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similarly to what commit e78f7b70e837 did for local task work additions,
use ->rings_rcu under RCU rather than dereference ->rings directly. See
that commit for more details.
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper.
Link: https://lore.kernel.org/io-uring/20260309062759.482210-1-naup96721@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the TCSR clock controller that provides the refclks on Eliza
platform for PCIe, USB and UFS subsystems.
Co-developed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-6-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for Global clock controller for Eliza Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-5-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the RPMH clocks present in Eliza SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-4-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-7.1
Merge DeviceTree bindings for Eliza global, rpmh, and tcsr clock
controllers through a topic branch, in case we need them in the
DeviceTree branch as well.
|
|
Update the documentation for RPMH clock controller for Eliza SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-3-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for TCSR Clock Controller for Eliza SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-2-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the Global Clock Controller on Qualcomm
Eliza SoC. Reuse the Milos bindings schema since the controller resources
are exactly the same, even though the controllers are incompatible between
them.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-clocks-v6-1-453c4cf657a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
