| Age | Commit message (Collapse) | Author |
|---|
|
The GuC CT state transition requires moving to the STOP state before
entering the DISABLED state. Update the driver teardown sequence to make
the proper state machine transitions.
Fixes: ee4b32220a6b ("drm/xe/guc: Add devm release action to safely tear down CT")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-6-zhanjun.dong@intel.com
(cherry picked from commit dace8cb0032f57ea67c87b3b92ad73c89dd2db44)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The intent of wedging a device is to allow queues to continue running
only in wedged mode 2. In other modes, queues should initiate cleanup
and signal all remaining fences. Fix xe_guc_submit_wedge to correctly
clean up queues when wedge mode != 2.
Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-4-zhanjun.dong@intel.com
(cherry picked from commit e25ba41c8227c5393c16e4aab398076014bd345f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
In GuC submit fini, forcefully tear down any exec queues by disabling
CTs, stopping the scheduler (which cleans up lost G2H), killing all
remaining queues, and resuming scheduling to allow any remaining cleanup
actions to complete and signal any remaining fences.
Split guc_submit_fini into device related and software only part. Using
device-managed and drm-managed action guarantees the correct ordering of
cleanup.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-3-zhanjun.dong@intel.com
(cherry picked from commit a6ab444a111a59924bd9d0c1e0613a75a0a40b89)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
xe_guc_submit_pause_abort is intended to be called after something
disastrous occurs (e.g., VF migration fails, device wedging, or driver
unload) and should immediately trigger the teardown of remaining
submission state. With that, kill any remaining queues in this function.
Fixes: 7c4b7e34c83b ("drm/xe/vf: Abort VF post migration recovery on failure")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-2-zhanjun.dong@intel.com
(cherry picked from commit 78f3bf00be4f15daead02ba32d4737129419c902)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
By using the same variable for both the return of poll_timeout_us and
the return of the polled function guc_wait_ucode, the return value of
the latter is overwritten and lost after exiting the polling loop. Since
guc_wait_ucode returns -1 on GuC load failure, we lose that information
and always continue as if the GuC had been loaded correctly.
This is fixed by simply using 2 separate variables.
Fixes: a4916b4da448 ("drm/xe/guc: Refactor GuC load to use poll_timeout_us()")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260303001732.2540493-2-daniele.ceraolospurio@intel.com
(cherry picked from commit c85ec5c5753a46b5c2aea1292536487be9470ffe)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Callers of cpc_read() ignore its return value, which can lead
to using uninitialized or stale values when the read fails.
Fix this by consistently checking cpc_read() return values in
cppc_get_perf_caps(), cppc_get_perf_ctrs(), and cppc_get_perf().
Link: https://lore.kernel.org/lkml/48bdf87e-39f1-402f-a7dc-1a0e1e7a819d@nvidia.com/
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://patch.msgid.link/20260318095005.2437960-1-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Simplifies allocation slightly by removing a kcalloc call and using
struct_size.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[linusw@kernel.org: Add in count variable and use __counted_by()]
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Assign gpiochip_generic_config() to the set_config() callback to support
pin configuration through the GPIO subsystem. This allows users to
configure GPIO pin attributes like pull-up/down when specifying a GPIO
line in the Device Tree.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Return -ENOTSUPP instead of -EINVAL when encountering unsupported pin
configuration parameters. This is more logical and allows the GPIO
subsystem to gracefully handle unsupported parameters via functions like
gpio_set_config_with_argument_optional(), which specifically ignores
-ENOTSUPP but treats others as failure.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
For avoid null pointer problem if no calibration data exist.
Fixes: 55137f5a68b5e ("ASoC: tas2781: Put three different calibrated data solution into the same data structure")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260319090747.2090-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
The netdev may get unregistered in between the time we take
the ref and the time we lock it. We may allocate the hierarchy
after flush has already run, which would lead to a leak.
Take the instance lock in pre- already, this saves us from the race
and removes the need for dedicated lock/unlock callbacks completely.
After all, if there's any chance of write happening concurrently
with the flush - we're back to leaking the hierarchy.
We may take the lock for devices which don't support shapers but
we're only dealing with SET operations here, not taking the lock
would be optimizing for an error case.
Fixes: 93954b40f6a4 ("net-shapers: implement NL set and delete operations")
Link: https://lore.kernel.org/20260309173450.538026-1-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260317161014.779569-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
This is not proper, a conversion from a ref to a locked netdev
must include a liveness check (a check if the netdev hasn't been
unregistered already). Fix the read cases (those under RCU).
Writes needs a separate change to protect from creating the
hierarchy after flush has already run.
Fixes: 4b623f9f0f59 ("net-shapers: implement NL get operation")
Reported-by: Paul Moses <p@1g4.org>
Link: https://lore.kernel.org/20260309173450.538026-1-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260317161014.779569-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With LPA/LPA2, the top bits of the PFN (Bits[51:48]) end up in the lower bits
of the PTE. So, simply creating a mask of the "top IPA bit" doesn't work well
for these configurations to set the "top" bit at the output of Stage1
translation.
Fix this by using the __phys_to_pte_val() to do the right thing for all
configurations.
Tested using, kvmtool, placing the memory at a higher address (-m <size>@<Addr>).
e.g:
# lkvm run --realm -c 4 -m 512M@@128T -k Image --console serial
sh-5.0# dmesg | grep "LPA2\|RSI"
[ 0.000000] RME: Using RSI version 1.0
[ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2)
[ 0.777354] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2)
Fixes: 399306954996 ("arm64: realm: Query IPA size from the RMM")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On memoryless nodes we can now allocate from cpu sheaves and refill them
normally. But when a node is memoryless on a system without actual
CONFIG_HAVE_MEMORYLESS_NODES support, freeing always uses the slowpath
because all objects appear as remote. We could instead benefit from the
freeing fastpath, because the allocations can't obtain local objects
anyway if the node is memoryless.
Thus adapt the locality check when freeing, and move them to an inline
function can_free_to_pcs() for a single shared implementation.
On configurations with CONFIG_HAVE_MEMORYLESS_NODES=y continue using
numa_mem_id() so the percpu sheaves and barn on a memoryless node will
contain mostly objects from the closest memory node (returned by
numa_mem_id()). No change is thus intended for such configuration.
On systems with CONFIG_HAVE_MEMORYLESS_NODES=n use numa_node_id() (the
cpu's node) since numa_mem_id() just aliases it anyway. But if we are
freeing on a memoryless node, allow the freeing to use percpu sheaves
for objects from any node, since they are all remote anyway.
This way we avoid the slowpath and get more performant freeing. The
potential downside is that allocations will obtain objects with a larger
average distance. If we kept bypassing the sheaves on freeing, a refill
of sheaves from slabs would tend to get closer objects thanks to the
ordering of the zonelist. Architectures that allow de-facto memoryless
nodes without proper CONFIG_HAVE_MEMORYLESS_NODES support should perhaps
consider adding such support.
Link: https://patch.msgid.link/20260311-b4-slab-memoryless-barns-v1-3-70ab850be4ce@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
|
|
Ming Lei has reported [1] a performance regression due to replacing cpu
(partial) slabs with sheaves. With slub stats enabled, a large amount of
slowpath allocations were observed. The affected system has 8 online
NUMA nodes but only 2 have memory.
For sheaves to work effectively on given cpu, its NUMA node has to have
struct node_barn allocated. Those are currently only allocated on nodes
with memory (N_MEMORY) where kmem_cache_node also exist as the goal is
to cache only node-local objects. But in order to have good performance
on a memoryless node, we need its barn to exist and use sheaves to cache
non-local objects (as no local objects can exist anyway).
Therefore change the implementation to allocate barns on all online
nodes, tracked in a new nodemask slab_barn_nodes. Also add a cpu hotplug
callback as that's when a memoryless node can become online.
Change both get_barn() and rcu_sheaf->node assignment to numa_node_id()
so it's returned to the barn of the local cpu's (potentially memoryless)
node, and not to the nearest node with memory anymore.
On systems with CONFIG_HAVE_MEMORYLESS_NODES=y (which are not the main
target of this change) barns did not exist on memoryless nodes, but
get_barn() using numa_mem_id() meant a barn was returned from the
nearest node with memory. This works, but the barn lock contention
increases with every such memoryless node. With this change, barn will
be allocated also on the memoryless node, reducing this contention in
exchange for increased memory consumption.
Reported-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/all/aZ0SbIqaIkwoW2mB@fedora/ [1]
Link: https://patch.msgid.link/20260311-b4-slab-memoryless-barns-v1-2-70ab850be4ce@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
|
|
The pointer to barn currently exists in struct kmem_cache_node. That
struct is instantiated for every NUMA node with memory, but we want to
have a barn for every online node (including memoryless).
Thus decouple the two structures. In struct kmem_cache we have an array
for kmem_cache_node pointers that appears to be sized MAX_NUMNODES but
the actual size calculation in kmem_cache_init() uses nr_node_ids.
Therefore we can't just add another array of barn pointers. Instead
change the array to newly introduced struct kmem_cache_per_node_ptrs
holding both kmem_cache_node and barn pointer.
Adjust barn accessor and allocation/initialization code accordingly. For
now no functional change intended, barns are created 1:1 together with
kmem_cache_nodes.
Link: https://patch.msgid.link/20260311-b4-slab-memoryless-barns-v1-1-70ab850be4ce@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
|
|
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
The same problem for all foreignly added dsa vlans on the bridge.
First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20260317110347.363875-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
Included features:
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
* tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: consolidate crypto allocations in one chunk
selftests: ovpn: add test for the FW mark feature
selftests: ovpn: check asymmetric peer-id
ovpn: add support for asymmetric peer IDs
selftests: ovpn: add notification parsing and matching
ovpn: notify userspace on client float event
ovpn: pktid: use bitops.h API
ovpn: use correct array size to parse nested attributes in ovpn_nl_key_swap_doit
selftests: ovpn: allow compiling ovpn-cli.c with mbedtls3
====================
Link: https://patch.msgid.link/20260317104023.192548-1-antonio@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Put the barrier() before the OP so that anything we read out in
OP and check in COND will actually be read out after the timeout
has been evaluated.
Currently the only place where we use OP is __intel_wait_for_register(),
but the use there is precisely susceptible to this reordering, assuming
the ktime_*() stuff itself doesn't act as a sufficient barrier:
__intel_wait_for_register(...)
{
...
ret = __wait_for(reg_value = intel_uncore_read_notrace(...),
(reg_value & mask) == value, ...);
...
}
Cc: stable@vger.kernel.org
Fixes: 1c3c1dc66a96 ("drm/i915: Add compiler barrier to wait_for")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260313110740.24620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
To reuse the ptdump code for shadow page table dumping later, let's pass
s2 mmu as the private data, so we have the freedom to select which page
table to print.
Signed-off-by: Wei-Lin Chang <weilin.chang@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://patch.msgid.link/20260317182638.1592507-2-weilin.chang@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The VIO_EN pin on the lp5860 can either be connected to VIO power supply
or GPIO.
Add the enable-gpios pin to the binding documentation.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260217-v6-19-topic-ti-lp5860-enable-gpio-v1-1-f5e8edeb5d74@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Under certain circumstances, all the remaining subrequests from a read
request will get abandoned during retry. The abandonment process expects
the 'subreq' variable to be set to the place to start abandonment from, but
it doesn't always have a useful value (it will be uninitialised on the
first pass through the loop and it may point to a deleted subrequest on
later passes).
Fix the first jump to "abandon:" to set subreq to the start of the first
subrequest expected to need retry (which, in this abandonment case, turned
out unexpectedly to no longer have NEED_RETRY set).
Also clear the subreq pointer after discarding superfluous retryable
subrequests to cause an oops if we do try to access it.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/3775287.1773848338@warthog.procyon.org.uk
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The docstring of hash_name() is falsely reporting that it returns the
component length, whereas it returns a pointer to the terminating '/'
or NUL character in the pathname being resolved.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260318203953.5770-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
chan.hdrlen is read once at channel registration by
ppp_register_net_channel(), and used to set the PPP net device's
hard_header_len. It was set to PPPOL2TP_L2TP_HDR_SIZE_NOSEQ (6), which
is 4 bytes too small if sequence numbers are later enabled via
setsockopt(PPPOL2TP_SO_SENDSEQ), causing unnecessary skb reallocations
on the TX path.
The setsockopt handler attempted to change netdev's hard_header_len by
updating chan.hdrlen, but the PPP layer never re-reads it after the
registration, so the update had no effect.
To avoid the unnecessary reallocations, set chan.hdrlen to
PPPOL2TP_L2TP_HDR_SIZE_SEQ (10) unconditionally at registration and
remove the ineffective update in the setsockopt callback.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260317054141.524879-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Correct several spelling mistakes and textual inconsistencies in
kdoc comments and inline comments.
Suggested-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Signed-off-by: Varun Gupta <varun.gupta@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260316035915.1403424-1-varun.gupta@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
|
|
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://patch.msgid.link/20260316193157.65748-1-mhijaz@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path.
Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks.
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Yiming Qian reports UaF when concurrent process is dumping hooks via
nfnetlink_hooks:
BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0
Read of size 8 at addr ffff888003edbf88 by task poc/79
Call Trace:
<TASK>
nfnl_hook_dump_one.isra.0+0xe71/0x10f0
netlink_dump+0x554/0x12b0
nfnl_hook_get+0x176/0x230
[..]
Defer release until after concurrent readers have completed.
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The test depends on accepting a packet that is larger than the
advertised window and that does not trigger an immediate ACK.
Previously, the test might still pass even if kernel behavior changed
unexpectedly. Add assertions verifying that the large packet was
accepted and no ACK was sent.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260316-improve_tcp_neg_usable_wnd_test-v1-1-f16d5e365107@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Bring in series "drm/{i915,xe}: sort out step enums between the drivers"
that was merged through i915.
Link: https://lore.kernel.org/all/cover.1772635152.git.jani.nikula@intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
alloc_netdev is a macro for single queue devices, so there's no need to
call alloc_netdev_mqs with a single tx/rx queue.
Signed-off-by: Roi L <roeilev321_@outlook.com>
Link: https://patch.msgid.link/SN6PR05MB58064E57FE979CE7B2BF7EF3DD42A@SN6PR05MB5806.namprd05.prod.outlook.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Serialization for the TX path was enforced by calling
usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before
a previous URB was completed. usb_tx_block() can be called from
interrupt context (e.g. in the HCD giveback path), so we can't always
use it to kill in-flight URBs.
Prevent sleeping during interrupt context by checking the tx_submitted
anchor for existing URBs. We now return -EBUSY, to indicate there's
a pending request.
Reported-by: syzbot+74afbb6355826ffc2239@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=74afbb6355826ffc2239
Fixes: d66676e6ca96 ("wifi: libertas: fix WARNING in usb_tx_block")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Link: https://patch.msgid.link/20260313-libertas-usb-anchors-v1-2-915afbe988d7@igalia.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The libertas driver currently handles URB lifecycles manually, which
makes it non-trivial to check if specific URBs are pending or not. Add
anchors for TX/RX URBs, and use those to track in-flight requests.
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Link: https://patch.msgid.link/20260313-libertas-usb-anchors-v1-1-915afbe988d7@igalia.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was pointed out before, but there are issues with just
removing the <0 check since enum representation isn't fixed,
nla_type() returns int but really can only return small
non-negative values, etc. Now newer versions of sparse are
also starting to warn on it. Just use int for the band var.
Link: https://patch.msgid.link/20260316123050.8c2d9f3426a0.I86acfa785982993fbffd148cc59049991bd6158f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Removing rsi_91x USB adapter could cause rtnetlink to lock up.
When rsi_mac80211_stop is called, wiphy_lock is locked. Call to
wiphy_rfkill_stop_polling would wait until the work queue has
finished, but because the work queue waits for wiphy_lock, that
would never happen.
Moving the call to rsi_disconnect avoids the lock up.
Signed-off-by: Ville Nummela <ville.nummela@kempower.com>
Link: https://patch.msgid.link/20260318081912.87744-1-ville.nummela@kempower.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_sta_free_link() only frees the link and doesn't
unhash it, so it can't be used here. Instead this needs
to use ieee80211_sta_remove_link(), which unhashes it. An
argument against it was that it also calls the driver and
that already happened, but calls to the driver removing a
link that's already removed are suppressed, so that's not
actually an issue. Use it to fix the hashtable.
Reported-and-tested-by: Jouni Malinen <j@w1.fi>
Fixes: 84674b03d8bf ("wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260318180622.9240067117e9.I45fb2b7f04d75e48d2f3e9c6650ef9f54a314f5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for MIPI CSI device and calibration logic found in Tegra20 and
Tegra30 SoC.
To get CSI operational, an additional syncpoint was allocated to serve as
the CSI frame counter. Both VIP and CSI use an existing syncpoint for VI
frame start events. That said, the frame capture function was refactored
to reflect the addition of the CSI syncpoint, and the CSI-specific
configuration is guarded by the presence of a passed CSI channel structure
pointer.
The camera capture setup's configuration was reconsidered: the first two
writes must be done before tegra_channel_set_stream for MIPI calibration
to work properly; the third write was moved to VIP/CSI-specific functions
since it must be source-specific; the function was placed after
tegra_channel_set_stream so the initial sequence is preserved and expanded.
CSI configuration sequences were added based on downstream 3.1 kernel
sources and adjusted to the existing video-tegra framework. Although
Tegra20 and Tegra30 have the same set of configurations, they differ by
the number of clocks used by CSI.
Dropped the software syncpoint counters in favor of reading syncpoints
directly and passing the incremented value to the polling function. If the
syncpoint increase fails, the PP is reset. This change should prevent
possible race conditions.
MIPI calibration logic was registered in CSI since Tegra20 and Tegra30
have no dedicated hardware block for these operations and use CSI. These
calls are used for both CSI and DSI to work properly, which is why MIPI
calibration cannot be contained within CSI. The pads passed to the
calibration calls resemble CSI PORT_A (0), CSI PORT_B (1), DSI-A (3) and
DSI-B (4).
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Co-developed-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Luma buffer stride is calculated by multiplying height in pixels of image
by bytes per line. Adjust that value accordingly.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
YUV422/YUV420p 1X16
Add support for Bayer formats (RAW8 and RAW10) and YUV422/420p 1X16
versions of existing YUV422/YUV420p 2X8.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Increase maximum VI clock frequency to 450MHz to allow correct work with
high resolution camera sensors.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
According to TRM Tegra20, Tegra30 and Tegra114 have VI revision 1,
Tegra124 has revision 2 and Tegra210 has revision 3. Set correct revision
in tegra20_vi_soc like tegra210 does.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Expand supported formats structure with data_type and bit_width fields
required for CSI support. Adjust tegra20_fmt_align by factoring out common
bytesperline and sizeimage calculation logic shared by supported planar
and non-planar formats and leaving planar-related correction under a
switch.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
VI in Tegra20/Tegra30 has 2 VI outputs with different set of supported
formats. Convert output registers to macros for simpler work with both
outputs since apart formats their layout matches.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Maximum width and height for Tegra20 and Tegra30 is determined by
respective register field, rounded down to factor of 2, which is 8191U
rounded down to 8190U.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The avdd-dsi-csi-supply is CSI power supply not VI, hence move it to
proper place.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # Tegra20 VIP
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
By default tegra_channel_get_remote_csi_subdev returns next device in pipe
assuming it is CSI but in case of Tegra20 and Tegra30 it can also be VIP
or even HOST.
Define tegra_channel_get_remote_csi_subdev within CSI and add check if
returned device is actually CSI by comparing subdevice operations.
Previous tegra_channel_get_remote_csi_subdev definition in VI rename to
tegra_channel_get_remote_bridge_subdev and use it only in VI driver since
core VI driver does not care about source and does not call any specific
functions.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Convert existing MIPI code to use operation function pointers, a necessary
step for supporting Tegra20/Tegra30 SoCs. All common MIPI configuration
that is SoC-independent remains in mipi.c, while all SoC-specific code is
moved to tegra114-mipi.c (The naming matches the first SoC generation with
a dedicated calibration block). Shared structures and function calls are
placed into tegra-mipi-cal.h.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move CSI helpers into the header for easier access from SoC-specific video
driver parts.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
controls are provided
Because the current Tegra video driver is video-centric, it exposes all
controls via /dev/video. If both the camera sensor and the VI provide
hflip and vflip, the driver will fail because only one control is allowed.
To address this, hflip and vflip should be added from the SoC only if the
camera sensor doesn't provide those controls.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
