summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-03-25drm/msm/hdmi: Simplify with local 'dev' variableKrzysztof Kozlowski
msm_hdmi_dev_probe() function already stores pdev->dev in local variable, so use it directly to make code simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/711171/ Link: https://lore.kernel.org/r/20260311-drm-msm-hdmi-cleanup-v1-3-c5535245f6de@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/hdmi: Avoid double error print on msm_hdmi_get_phy() failureKrzysztof Kozlowski
msm_hdmi_get_phy() already prints error messages on each error path using dev_err_probe(), so final DRM_DEV_ERROR() would duplicate it and possibly flood the dmesg on probe deferrals. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/711168/ Link: https://lore.kernel.org/r/20260311-drm-msm-hdmi-cleanup-v1-2-c5535245f6de@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/hdmi: Simplify with dev_of_node()Krzysztof Kozlowski
Simplify chain of pointer dereferences with dev_of_node() which also checks if 'dev' argument is non-NULL. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/711167/ Link: https://lore.kernel.org/r/20260311-drm-msm-hdmi-cleanup-v1-1-c5535245f6de@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/hdmi: Fix wrong CTRL1 register used in writing info framesKrzysztof Kozlowski
Commit 384d2b03d0a1 ("drm/msm/hdmi: make use of the drm_connector_hdmi framework") changed the unconditional register writes in few places to updates: read, apply mask, write. The new code reads REG_HDMI_INFOFRAME_CTRL1 register, applies fields/mask for HDMI_INFOFRAME_CTRL0 register and finally writes to HDMI_INFOFRAME_CTRL0. This difference between CTRL1 and CTRL0 looks unintended and may result in wrong data being written to HDMI bridge registers. Cc: <stable@vger.kernel.org> Fixes: 384d2b03d0a1 ("drm/msm/hdmi: make use of the drm_connector_hdmi framework") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/711156/ Link: https://lore.kernel.org/r/20260311191620.245394-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/hdmi: make 'msm_hdmi_pm_ops' staticBen Dooks
The struct 'msm_hdmi_pm_ops' is not used outside of the file it is defined in, so make it static. Fixes the following sparse warning: drivers/gpu/drm/msm/hdmi/hdmi.c:432:1: warning: symbol 'msm_hdmi_pm_ops' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/710583/ Link: https://lore.kernel.org/r/20260310132501.195954-1-ben.dooks@codethink.co.uk Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/mdss: Add a TODO for better managing the MDSS clock power stateKonrad Dybcio
There's a small window where the MDP clock could be set to a high rate (say, from the bootloader) without a corresponding RPM(H)PD vote to back it up. This is normally not an issue, but could be, if rmmod fails to shut down the display driver cleanly, and the module is inserted again, or when the providers' .sync_state has timed out. Mark a TODO to fix it one day. Linking the relevant discussion below. Link: https://lore.kernel.org/linux-arm-msm/d5c4eed5-bd87-4156-b178-2d78140ec8a9@oss.qualcomm.com/ Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/710572/ Link: https://lore.kernel.org/r/20260310-topic-mdss_power_todo-v1-1-59457b8b7486@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/dsi: add the missing parameter descriptionPengyu Luo
Add a description for is_bonded_dsi in dsi_adjust_pclk_for_compression to match the existing kernel-doc comment. Fixes: e4eb11b34d6c ("drm/msm/dsi: fix pclk rate calculation for bonded dsi") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202603080314.XeqyRZ7A-lkp@intel.com/ Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/710112/ Link: https://lore.kernel.org/r/20260309100254.877801-1-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/dpu: fix mismatch between power and frequencyYuanjie Yang
During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops the MMCX rail to MIN_SVS while the core clock frequency remains at its original (highest) rate. When runtime resume re-enables the clock, this may result in a mismatch between the rail voltage and the clock rate. For example, in the DPU bind path, the sequence could be: cpu0: dev_sync_state -> rpmhpd_sync_state cpu1: dpu_kms_hw_init timeline 0 ------------------------------------------------> t After rpmhpd_sync_state, the voltage performance is no longer guaranteed to stay at the highest level. During dpu_kms_hw_init, calling dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to fall to MIN_SVS while the core clock is still at its maximum frequency. When the power is re-enabled, only the clock is enabled, leading to a situation where the MMCX rail is at MIN_SVS but the core clock is at its highest rate. In this state, the rail cannot sustain the clock rate, which may cause instability or system crash. Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend to ensure the correct vote is restored when DPU resumes. Fixes: b0530eb11913 ("drm/msm/dpu: Use OPP API to set clk/perf state") Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/710077/ Link: https://lore.kernel.org/r/20260309063720.13572-1-yuanjie.yang@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XPPengyu Luo
Document DSI controller and DSI phy on SC8280XP platform. Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/709947/ Link: https://lore.kernel.org/r/20260308064835.479356-4-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display/msm: dsi-controller-main: Add SC8280XPPengyu Luo
Since SC8280XP and SA8775P have the same DSI version(2.5.1), then we fallback to SA8775P compatible. Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/709944/ Link: https://lore.kernel.org/r/20260308064835.479356-3-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XPPengyu Luo
Since SC8280XP and SA8775P have the same values for the REVISION_ID registers, then we fallback to SA8775P compatible. Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/709943/ Link: https://lore.kernel.org/r/20260308064835.479356-2-mitltlatltl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/mdss: Add support for Eliza SoCKrzysztof Kozlowski
Add support for the Qualcomm Eliza SoC platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/708874/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-8-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/dpu: Add support for Eliza SoCKrzysztof Kozlowski
Add support for DPU (v12.4) on Qualcomm Eliza SoC, with one incomplete/skipped part: HDMI interface (INT_4). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/708879/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-7-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display/msm: qcom,eliza-mdss: Add Eliza SoCKrzysztof Kozlowski
Add MDSS/MDP display subsystem for Qualcomm Eliza SoC, being overall a minor revision change against SM8750, but coming with few different components, like different DSI PHY, missing DP1 and added HDMI. The binding does not include HDMI description yet. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/708878/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-5-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display/msm: qcom,sm8650-dpu: Add Eliza SoCKrzysztof Kozlowski
Add DPU (v12.4) for Qualcomm Eliza SoC which has noticeable differences against SM8750 (v12.0) of mostly removing blocks: - INTF_3 paired with INTF_0 (no DP1), - Removed CTL4-5 blocks, - Removed VIG2-3 and DMA4-5, - Removed LM4-7, DSPP3, PINGPONG4-7, MERGE4-5 and several DSC blocks, - Added HDMI interface. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/708872/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-4-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display/msm: dsi-controller-main: Add Eliza SoCKrzysztof Kozlowski
Add DSI controller Qualcomm Eliza SoC using exactly the same block as SM8750. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/708867/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-3-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display/msm: dsi-phy-7nm: Add Eliza SoCKrzysztof Kozlowski
Add DSI PHY 4nm v5.2.4 for the Qualcomm Eliza SoC, fully compatible with SM8650. Note that this DSI PHY, unlike the Eliza MDSS DSI, is not compatible with SM8750. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/708866/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-2-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25dt-bindings: display/msm: dp-controller: Add Eliza SoCKrzysztof Kozlowski
Add DisplayPort controller for Qualcomm Eliza SoC fully compatible with SM8650. The device looks very similar to SM8750 (same DP TX block v1.5.1) but with a differences in DP PHY: Eliza and SM8650 use DP PHY 4nm v7.0, SM8750 uses 3nm v8.0. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/708864/ Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-1-ea0579f62358@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/mdp5: Remove MSM8974v1Konrad Dybcio
To the best of my knowledge, the v1 version of this SoC had been superseded before any device was released on the market. Everywhere else in the kernel, there are assumptions about the SoC being revision 2 or the later MSM8974PRO. Remove the config for that flavor of MDP. To bring the naming in line with the rest of the kernel, remove the v2 suffix from the remaining config. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/708112/ Link: https://lore.kernel.org/r/20260302-topic-goodnight_8974v1-v1-1-e0006f7a0526@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm: add missing MODULE_DEVICE_ID definitionsDmitry Baryshkov
The drm/msm module bundles several drivers, each of them having a separate OF match table, however only MDSS (subsystem), KMS devices and GPU have corresponding MODULE_DEVICE_ID tables. Add MODULE_DEVICE_ID to the display-related driver and to all other drivers in this module, simplifying userspace job. Fixes: 060530f1ea67 ("drm/msm: use componentised device support") Reported-by: Loïc Minier <loic.minier@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/707960/ Link: https://lore.kernel.org/r/20260228-msm-device-id-v2-1-24b085919444@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/msm/dpu: enable virtual planes by defaultDmitry Baryshkov
Turn on the switch and use virtual planes by default, enhancing utilisation of the display pipelines. It is still possible to use legacy implementation by using `msm.dpu_use_virtual_planes=false` kernel boot parameter. Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455, Patchwork: https://patchwork.freedesktop.org/patch/707437/ Link: https://lore.kernel.org/r/20260226-dpu-enable-virt-planes-v2-1-87971236fe86@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2026-03-25drm/i915: move CNP clock gating init into intel_pchLuca Coelho
Move the CNP PCH clock gating programming into intel_pch_init_clock_gating() and switch the corresponding CFL/CML caller to the display-specific code. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260324080441.154609-5-luciano.coelho@intel.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2026-03-25drm/i915: move LPT clock gating init into intel_pchLuca Coelho
Move the LPT PCH clock gating programming into intel_pch_init_clock_gating() and switch the corresponding Haswell/Broadwell callers to the display-specific code. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260324080441.154609-4-luciano.coelho@intel.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2026-03-25drm/i915: move CPT clock gating init into intel_pchLuca Coelho
Move the CPT PCH clock gating programming into intel_pch_init_clock_gating() and switch the corresponding IVB callers to the display-specific code. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260324080441.154609-3-luciano.coelho@intel.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2026-03-25drm/i915/display: move clock-gating init for IBX to displayLuca Coelho
Add a new function in the display code to help initialize clock-gating without reading display PCH registers directly from non-display code. This adds a mini-framework to deal with display-specific PCH registers and uses it for IBX as a start. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260324080441.154609-2-luciano.coelho@intel.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2026-03-24clk: airoha: Add econet EN751221 clock/reset support to en7523-scuCaleb James DeLisle
EcoNet EN751221 clock/reset driver is significantly similar to the EN7523 / EN7581, however the EN751221 does not have a neat batch of clock divider registers so there are fewer known clocks, and the frequency of each clock is derived differently. This clock driver will probably work correctly on EN751627, EN7528, and EN7580. Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2026-03-24dt-bindings: clock, reset: Add econet EN751221Caleb James DeLisle
Add clock and reset bindings for EN751221 as well as a "chip-scu" which is an additional regmap that is used by the clock driver as well as others. This split of the SCU across two register areas is the same as the Airoha AN758x family. Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2026-03-24sched_ext: Choose the right sch->ops.name to output in the print_scx_info()Zqiang
The print_scx_info() always output scx_root structure's->ops.name, but for built with CONFIG_EXT_SUB_SCHED=y kernels, the tasks may be attach an sub scx_sched structure. this commit therefore use the scx_task_sched_rcu() to correctly get scx_sched structure to output ops.name, and drop state check. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Zqiang <qiang.zhang@linux.dev> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-03-24Input: msg2638 - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: mms114 - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Also stop trying to check if input device is opened/in use in the interrupt handler - the interrupt is disabled when device is closed or suspended. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: mk712 - use guard notation when acquiring spinlockDmitry Torokhov
Using guard notation makes the code more compact and error handling more robust by ensuring that locks are released in all code paths when control leaves critical section. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: melfas_mip4 - switch to using cleanup functionsDmitry Torokhov
Start using __free() and guard() primitives to simplify the code and error handling. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: lpc32xx_ts - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: iqs7211 - use cleanup facility for fwnodesDmitry Torokhov
Use __free(fwnode_handle) cleanup facility to ensure that references to acquired fwnodes are dropped at appropriate times automatically. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: iqs5xx - simplify parsing of firmware blobDmitry Torokhov
Do not define or use iqs5xx_ihex_rec structure: the original code was using just a couple of fields in it and instead used it to calculate offset to record data. The data field was actually reserving space for checksum. Instead iterate through fields and advance pointer explicitly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: iqs5xx - switch to using cleanup functionsDmitry Torokhov
Start using __free() and guard() primitives to simplify the code and error handling. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: ipaq-micro-ts - use guard notation when acquiring mutex/spinlockDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: imx6ul_tsc - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: imagis - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: hycon-hy46xx - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: hideep - switch to using cleanup functionsDmitry Torokhov
Start using __free() and guard() primitives to simplify the code and error handling. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: goodix - switch to using cleanup functions in firmware codeDmitry Torokhov
Start using __free(firmware) to simplify the code and error handling. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: exc3000 - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Note that callers of exc3000_vendor_data_request() always expect response, so it was adjusted to always wait for it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: elo - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: elants_i2c - switch to using cleanup facilitiesDmitry Torokhov
Start using __free() and guard() primitives to simplify the code and error handling. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: ektf2127 - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: eeti_ts - use guard notation when acquiring mutexesDmitry Torokhov
This makes the code more compact and error handling more robust. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: edt-ft5x06 - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: cyttsp - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Also fix the touchscreen not being marked as suspended when noone has opened/is using it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-03-24Input: chipone_icn8318 - use guard notation when acquiring mutexDmitry Torokhov
Guard notation simplifies code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-16 11:49:54 +0000