summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-03-26arm64: dts: qcom: sm6350: Explicitly describe the IPA IMEM sliceKonrad Dybcio
As part of stepping away from crazy hardcoding in the driver, move define the slice explicitly and pass it to the IPA node. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260305-topic-ipa_mem_dts-v2-4-5cb5b90902bf@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sdm845: Explicitly describe the IPA IMEM sliceKonrad Dybcio
As part of stepping away from crazy hardcoding in the driver, move define the slice explicitly and pass it to the IPA node. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260305-topic-ipa_mem_dts-v2-3-5cb5b90902bf@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sc7280: Explicitly describe the IPA IMEM sliceKonrad Dybcio
As part of stepping away from crazy hardcoding in the driver, move define the slice explicitly and pass it to the IPA node. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260305-topic-ipa_mem_dts-v2-2-5cb5b90902bf@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sc7180: Explicitly describe the IPA IMEM sliceKonrad Dybcio
As part of stepping away from crazy hardcoding in the driver, move define the slice explicitly and pass it to the IPA node. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260305-topic-ipa_mem_dts-v2-1-5cb5b90902bf@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: lemans-evk: Add IFP MezzanineUmang Chheda
The Interface Plus [IFP] Mezzanine is an hardware expansion add-on board designed to be stacked on top of Lemans EVK. It has following peripherals : - 4x Type A USB ports in host mode. - TC9563 PCIe switch, which has following three downstream ports (DSP) : - 1st DSP is routed to an M.2 E-key connector, intended for WLAN modules. - 2nd DSP is routed to an M.2 B-key connector, intended for cellular modems. - 3rd DSP with support for Dual Ethernet ports. - eMMC. - Additional 2.5GbE Ethernet PHY connected to native EMAC with support for MAC Address configuration via NVMEM. - EEPROM. - LVDS Display. - 2*mini DP. Add support for following peripherals : - TC9563 PCIe Switch. - Additional 2.5GbE Ethernet Port. - EEPROM. Enable support for USB hub, LVDS display and mini-DP later once dependent changes are available in lemans-evk core-kit. Written with inputs from : Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com> - Ethernet. Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> - PCIe Monish Chunara <monish.chunara@oss.qualcomm.com> - EEPROM. Signed-off-by: Umang Chheda <umang.chheda@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260304165925.1535938-2-umang.chheda@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: monaco-evk: Add IFP MezzanineUmang Chheda
The IFP Mezzanine is an hardware expansion add-on board designed to be stacked on top of Monaco EVK. It has following peripherals : - 4x Type A USB ports in host mode. - TC9563 PCIe switch, which has following three downstream ports (DSP) : - 1st DSP is routed to an M.2 E-Key connector, intended for WLAN modules. - 2nd DSP is routed to an M.2 B-key connector, intended for cellular modems. - 3rd DSP with support for Dual Ethernet ports. - EEPROM. - LVDS Display. - 2*mini DP. Add support for following peripherals : - TC9563 PCIe Switch. - EEPROM. Enable support for USB hub, LVDS display and mini-DP later once dependent changes are available in monaco-evk core-kit. Written with inputs from : Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> - PCIe Monish Chunara <monish.chunara@oss.qualcomm.com> - EEPROM. Signed-off-by: Umang Chheda <umang.chheda@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260303164314.886733-2-umang.chheda@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sc7280-chrome-common: disable VenusDmitry Baryshkov
Iris driver doesn't support non-PAS/TZ setup for setting up the Iris core. It's expected that the ABI that is going to be used in a long-term would be different from the defined venus-firmware subnode. Granted that the SC7280 Chromebooks were cancelled before reaching wide audience and granted the feature ABI changes, drop venus configuration for SC7280 ChromeOS devices. Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260131-venus-iris-flip-switch-v4-1-e10b886771e1@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sm8150-hdk: describe WiFi/BT properlyDmitry Baryshkov
Properly describe the PMU present as a part of the onboard WCN3998 WiFi/BT chip. Enable Bluetooth part of the chip too. [ 5.479978] Bluetooth: hci0: setting up wcn399x [ 5.633763] Bluetooth: hci0: QCA Product ID :0x0000000a [ 5.645350] Bluetooth: hci0: QCA SOC Version :0x40010224 [ 5.650906] Bluetooth: hci0: QCA ROM Version :0x00001001 [ 5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699 [ 5.679356] Bluetooth: hci0: QCA controller version 0x02241001 [ 5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin [ 6.842948] Bluetooth: hci0: QCA setup on UART is completed [ 81.510709] ath10k_snoc 18800000.wifi: qmi chip_id 0x30224 chip_family 0x4001 board_id 0x55 soc_id 0x40060000 [ 81.521713] ath10k_snoc 18800000.wifi: qmi fw_version 0x32040163 fw_build_timestamp 2019-10-08 05:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0-00355-QCAHLSWMTPLZ-1 [ 81.554143] ath10k_snoc 18800000.wifi: failed to fetch board data for bus=snoc,qmi-board-id=55,qmi-chip-id=30224,variant=Qualcomm_sm8150hdk from ath10k/WCN3990/hw1.0/board-2.bin [ 85.467464] ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 [ 85.478132] ath10k_snoc 18800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 85.487223] ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 [ 85.758168] ath10k_snoc 18800000.wifi: htt-ver 3.73 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 [ 85.901630] ath10k_snoc 18800000.wifi: invalid MAC address; choosing random Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-14-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sdm845-db845c: describe WiFi/BT properlyDmitry Baryshkov
The onboard WiFi / BT device, WCN3990, has a simple on-chip PMU, which further spreads generated voltage. Describe the PMU in the device tree. Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-13-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sda660-ifc6560: describe WiFi/BT properlyDmitry Baryshkov
The onboard WiFi / BT device, WCN3990, has a simple on-chip PMU, which further spreads generated voltage. Describe the PMU in the device tree. Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-12-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: qrb4210-rb2: describe WiFi/BT properlyDmitry Baryshkov
The onboard WiFi / BT device, WCN3988, has a simple on-chip PMU, which further spreads generated voltage. Describe the PMU in the device tree. Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-11-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: qrb2210-rb1: describe WiFi/BT properlyDmitry Baryshkov
The onboard WiFi / BT device, WCN3950, has a simple on-chip PMU, which further spreads generated voltage. Describe the PMU in the device tree. Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-10-0386204328be@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: Add Redmi GoBarnabás Czémán
Redmi Go (tiare) is like Redmi 5A with small differences like charging, fuel gauge and different speaker codec. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260315-riva-common-v3-6-897f130786ed@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: Add Redmi 4ABarnabás Czémán
Redmi 4A (rolex) is like Redmi 5A with small differences like charging, fuel gauge, different speaker codec configuration and display. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260315-riva-common-v3-5-897f130786ed@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26dt-bindings: arm: qcom: Add Redmi 4A and GoBarnabás Czémán
Add Redmi 4A (rolex) and Redmi Go (tiare). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20260315-riva-common-v3-4-897f130786ed@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: msm8917-xiaomi-wingtech: Add goodix touchBarnabás Czémán
There are variants from MSM8917 wingtech xiaomis what are using goodix touch controller instead of focaltech. Add goodix node for make it able to use touch on all variants. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20260315-riva-common-v3-3-897f130786ed@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: Make a common base from Redmi 5ABarnabás Czémán
Redmi 5A was made by wingtech like Redmi 4A (rolex) and Redmi GO (tiare). They are very similar, make a common base from riva for avoid unnecessary code duplications. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260315-riva-common-v3-2-897f130786ed@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: msm8917-xiaomi-riva: Fix board-id for all bootloaderBarnabás Czémán
Redmi 5A comes with multiple bootloader versions where the expected board-id is different. Change the board-id to unified form what works on both bootloader version. Fixes: 26633b582056 ("arm64: dts: qcom: Add Xiaomi Redmi 5A") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260315-riva-common-v3-1-897f130786ed@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: milos-fairphone-fp6: Enable UFSLuca Weiss
Configure and enable the nodes for UFS, so that we can access the internal storage. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20260319-milos-ufs-v3-2-b7c60bdd0d48@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: milos: Add UFS nodesLuca Weiss
Add the nodes for the UFS PHY and UFS host controller, along with the ICE used for UFS. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20260319-milos-ufs-v3-1-b7c60bdd0d48@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming consoleKancyJoe
Add initial Device Tree for the Ayaneo Pocket S2 gaming console based on the Qualcomm Snapdragon 8 Gen 3 platform. The design is similar to a phone without the modem, the game control is handled via a standalone controller connected to a PCIe USB controller. Display panel support will be added in a second time. Signed-off-by: KancyJoe <kancy2333@outlook.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-5-797bf96df771@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sm8650: Add sound DAI prefix for DPNeil Armstrong
Sound DAI devices exposing same set of mixers, e.g. each DisplayPort controller, need to add dedicated prefix for these mixers to avoid conflicts and to allow ALSA to properly configure given instance. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-4-797bf96df771@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26dt-bindings: arm: qcom: document the Ayaneo Pocket S2Neil Armstrong
Document the Qualcomm SM8650 based Ayaneo Pocket S2 gaming console. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-3-797bf96df771@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26dt-binding: vendor-prefixes: document the Ayaneo brandNeil Armstrong
Document the Ayaneo from the Anyun Intelligent Technology (Hong Kong) Co., Ltd company. Website: https://www.ayaneo.com/product/ayaneobrand.html Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-2-797bf96df771@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sdm845-xiaomi-beryllium: Mark l1a regulator as powered ↵David Heidelberg
during boot The regulator must be on, since it provides the display subsystem and therefore the bootloader had turned it on before Linux booted. Fixes: 77809cf74a8c ("arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)") Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-beryllium-booton-v2-1-931d1be21eae@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: hamoa/purwa: Flatten usb controller nodesKrishna Kurapati
Flatten usb controller nodes and update to using latest bindings and flattened driver approach. Tested this patch on CRD platform. For testing purpose, modified dr_mode property and added usb-role-switch property to the 3 super speed capable DRD controllers and valdiated both host and device mode. Also validated host mode on the multiport controller. Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260323103119.1801139-1-krishna.kurapati@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: purwa-iot-evk: Add SDC2 node for purwa iot evk boardSarthak Garg
Enable SD Card host controller for purwa iot evk board. Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260323110017.2527956-1-sarthak.garg@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sm7225-fairphone-fp4: Fix conflicting bias pinctrlLuca Weiss
The pinctrl nodes from sm6350.dtsi already contain a bias-* property, so that needs to be deleted, otherwise the dtb will contain two conflicting bias-* properties. Reported-by: Conor Dooley <conor@kernel.org> Closes: https://lore.kernel.org/r/20260310-maritime-silly-05e7b7e03aa6@spud/ Fixes: c4ef464b24c5 ("arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20260319-fp4-uart1-fix-v1-1-f6b3fedef583@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: monaco-evk: add lt8713sx bridge with displayportVishnu Saini
Monaco-evk has LT8713sx which act as DP to 3 DP output converter. Edp PHY from monaco soc is connected to lt8713sx as input and output of lt8713sx is connected to 3 mini DP ports. Two ports are available in mainboard and one port is available on Mezz board. lt8713sx is connected to soc over i2c0 and with reset gpio connected to pin6 of ioexpander5. Enable the edp nodes from monaco and enable lontium lt8713sx bridge node. Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com> Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com> Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260319-lt8713sx-bridge-linux-for-next-v4-1-da886ec78fe3@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: milos: Add LPASS LPI pinctrl nodeLuca Weiss
Add a node for the LPASS LPI pinctrl found on the Milos SoC and define a few pinctrl states that will be used in the future. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Acked-by: Linus Walleij <linusw@kernel.org> Link: https://lore.kernel.org/r/20260306-milos-pinctrl-lpi-v1-4-086946dbb855@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sdm845-sony-xperia-tama: Add bluetoothPetr Hodina
Enable the bluetooth interface on the uart6 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Petr Hodina <petr.hodina@protonmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20260120-akatsuki-uart-v2-2-867ee7f042d0@protonmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sdm845-sony-xperia-tama: Correct uart instancesPetr Hodina
Change the uart instances: - uart6 is for bluetooth - uart9 is for serial console (available on the uSD pinout) Most OSes assume serial0 is for console UART. Bluetooth interface uses UART interface. uart6 is standard debug console and uart9 bluetooth on SDM845 devices. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Petr Hodina <petr.hodina@protonmail.com> Link: https://lore.kernel.org/r/20260120-akatsuki-uart-v2-1-867ee7f042d0@protonmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: sdm845-oneplus: Add alert-sliderGergo Koteles
The alert-slider is a tri-state sound profile switch found on the OnePlus 6, Android maps the states to "silent", "vibrate" and "ring". Expose them as ABS_SND_PROFILE events. The previous GPIO numbers were wrong. Update them to the correct ones. Co-developed-by: Casey Connolly <casey@connolly.tech> Signed-off-by: Casey Connolly <casey@connolly.tech> Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20251113-op6-tri-state-v8-2-54073f3874bc@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: glymur-crd: Enable keyboard, trackpad and touchscreenAbel Vesa
On CRD, the keyboard, trackpad and touchscreen are connected over I2C and all share a 3.3V regulator. So describe the regulator and each input device along with their pinctrl states. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-glymur-dts-crd-enable-kbd-tp-ts-v6-1-626d008534d9@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: glymur-crd: Enable eDP display supportAbel Vesa
Enable the MDSS (Mobile Display SubSystem), the third DisplayPort controller, and its PHY to drive the onboard eDP panel on the Glymur CRD platform. Also describe the regulator supplying panel power. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-crd-add-edp-v7-2-ca415560447e@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: glymur: Describe display-related nodesAbel Vesa
The MDSS (Mobile Display SubSystem) on Glymur provides four DisplayPort controllers. Describe them together with the display controller and eDP PHY. Also add the combo PHY link and vco_div clocks to the display clock controller, and connect the PHYs and DP endpoints in the graph. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-crd-add-edp-v7-1-ca415560447e@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: glymur-crd: Enable USB supportWesley Cheng
The Qualcomm Glymur Compute Reference Device comes with two Type-C ports, one USB Type-A port, and a fingerprint reader connected over USB. Each Type-C port is connected to one USB combo PHY and one M31 eUSB2 PHY. The Type-A port is connected to the USB multi-port controller through one M31 eUSB2 PHY and one USB3 UNI PHY. The fingerprint reader is connected to the USB_2 controller. All M31 eUSB2 PHYs have associated eUSB2-to-USB 2.0 repeaters, which are either integrated in SMB2370 PMICs or provided by dedicated NXP PTN3222 devices. Enable all required controllers, PHYs, and repeaters, while specifying their supplies. Also describe the PMIC GLINK graph for the Type-C connectors. Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-add-usb-support-v7-2-ba367eda6010@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: glymur: Add USB related nodesWesley Cheng
The Glymur USB subsystem contains three USB 3.2 Gen 2 controllers, one USB 3.2 multi-port controller, and one USB 2.0-only controller. This includes five SS USB QMP PHYs (three combo and two UNI) and six M31 eUSB2 PHYs. All controllers are based on SNPS DWC3, so describe them as Qualcomm flattened DWC3 nodes. Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-add-usb-support-v7-1-ba367eda6010@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: glymur: Add glymur BWMONsPragnesh Papaniya
Add the CPU BWMON nodes for glymur SoCs. Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Pragnesh Papaniya <pragnesh.papaniya@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260302-glymur_bwmon_dt-v1-1-f4939d75bd47@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-mtp: Enable display DSI devicesYuanjie Yang
Enable MDSS/DPU/DSI0 and add Novatek NT37801 panel on Kaanapali MTP board. NT37801 Spec V1.0 chapter "5.7.1 Power On Sequence" states VDDI ranges 1.65V~1.95V, but ldo12 ranges 1.2V~1.8V, so change ldo12 range to 1.65V~1.8V. pmh0110_d_e0_gpios and pmh0110_f_e0_gpios are configured for level shifters. Kaanapali need configure these pinctrl for panel function. Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-6-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali: add display hardware devicesYuanjie Yang
Add MDSS/MDP/DSI controllers and DSI PHYs for Kaanapali. DP controllers are not included. Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-5-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-mtp: Enable bluetooth and WifiZijun Hu
Enable bluetooth WCN785x and Wi-Fi on Kaanapali MTP board. Co-developed-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-4-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-qrd: Add PMIC supportJishnu Prakash
Include PMIC files used on Kaanapali QRD boards. Add configurations for keys (volume up and volume down), RGB LEDs and flash LEDs. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Shawn Guo <shengchao.guo@oss.qualcomm.com> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-3-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-mtp: Add PMIC supportJishnu Prakash
Include PMIC files used on Kaanapali MTP boards. Add configurations for keys (volume up and volume down), RGB LEDs and flash LEDs. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Shawn Guo <shengchao.guo@oss.qualcomm.com> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-2-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali: Add PMIC devicesJishnu Prakash
Add a spmi-pmic-arb device for the SPMI PMIC arbiter found on Kaanapali. It has two subnodes corresponding to the SPMI0 bus controller and the SPMI1 bus controller. Also add dtsi files for PMH0104, PMH0110, PMD8028, PMIH0108, PMR735D and PM8010 along with temp-alarm and GPIO nodes under them, which are needed on Kaanapali. Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-1-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali: Add support for MM clock controllers for KaanapaliTaniya Das
Add the device nodes for the multimedia clock controllers (cambistmclkcc, camcc, dispcc, videocc, gpucc and gxclkctl). Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-9-79d20dab8a60@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-mtp: Add audio support (WSA8845, WCD9395, DMIC)Prasad Kumpatla
Add support for audio on the Kaanapali MTP platform by introducing device tree nodes for WSA8845 smart speaker amplifier for playback, DMIC microphone for capture, and sound card routing. The WCD9395 codec is add to supply MIC-BIAS, for enabling onboard microphone capture. Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-8-79d20dab8a60@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-qrd: Enable ADSP and CDSPJingyi Wang
Enable ADSP and CDSP on Kaanapali QRD board. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-7-79d20dab8a60@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali-mtp: Enable ADSP and CDSPJingyi Wang
Enable ADSP and CDSP on Kaanapali MTP board. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-6-79d20dab8a60@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-03-26arm64: dts: qcom: kaanapali: Add support for audioPrasad Kumpatla
Introduce audio support for Kaanapali SoC by adding LPASS macro codecs, TLMM pin controller and SoundWire controller with similar hardware implementation to SM8750 platform. Also add GPR (Generic Pack Router) node along with support for APM (Audio Process Manager) and PRM (Proxy Resource Manager) audio services. Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260224-knp-dts-misc-v6-5-79d20dab8a60@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-16 08:14:57 +0000