| Age | Commit message (Collapse) | Author |
|---|
|
Add the P1 PMIC's regulator topology tree for pico-itx board.
Link: https://lore.kernel.org/r/20260327-02-k3-i2c-v2-1-9c6b374470c6@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Populate all I2C devicetree nodes for SpacemiT K3 SoC. The controller of
i2c3 is reserved for secure domain, and not available from Linux. The
controller of i2c7 simply doesn't exist from hardware perspective, as
vendor directly name the i2c controller used for PMIC as i2c8.
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20260327-02-k3-i2c-v2-1-2119c0918868@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
`u8 h_shared_count` indicates the shared xattr count of an inode. It is
read from the on-disk xattr ibody header, which should be corrupted if
the size of the shared xattr array exceeds the space available in
`xattr_isize`.
It does not cause harmful consequence (e.g. crashes), since the image is
already considered corrupted, it indeed results in the silent processing
of garbage metadata.
Let's harden it to report -EFSCORRUPTED earlier.
Signed-off-by: Utkal Singh <singhutkal015@gmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Sometimes while watching a Youtube video with Bluetooth headphones the
audio has a lot of interruptions, because the 5th byte of the BT info
sent by RTL8821AU has strange values, which result in
coex_stat->bt_hid_pair_num being 2 or 3. When this happens
rtw_coex_freerun_check() returns true, which causes
rtw_coex_action_wl_connected() to call rtw_coex_action_freerun() instead
of rtw_coex_action_bt_a2dp().
The RTL8821AU vendor driver doesn't do anything with the 5th byte of the
BT info, so ignore it here as well.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bbf06c83-d2ee-4205-8fbb-829e2347586f@gmail.com
|
|
For different A-die, there will be different TX power parameters.
In FW element header, the corresponding A-die ID will be described.
So, compare runtime AID with that to load the target TX power
parameters.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-9-pkshih@realtek.com
|
|
RF parameters are conditional formats with RFE type and CV as arguments,
but RTL8922D has many variants and use ACV as argument instead of CV.
Add to select proper register values.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-8-pkshih@realtek.com
|
|
PHY page range is to define offset from PHY0 to PHY1, and RTL8922D
needs to expand page to 0x2E0.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-7-pkshih@realtek.com
|
|
The pre-load function is a MAC function to pre-load TX packets into
WiFi device's memory, so it can enhance performance. However, RTL8922DE
has not fully verified and fine tune this function, temporarily disable
this function.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-6-pkshih@realtek.com
|
|
The RTL8922D can reuse most mac memory addresses, but only
RTW89_MAC_MEM_SECURITY_CAM is different from existing one. Add a function
to return the specific memory address for RTL8922D.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-5-pkshih@realtek.com
|
|
The PCIE SER is to diagnose PCIE becomes abnormal, relying on IMR settings
to trigger interrupt when status is weird. Update settings to disable
PHY error flag 9, and clear ISR when initial and leaving WoWLAN.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-4-pkshih@realtek.com
|
|
Under MLO connections, the original Magic Packet configuration
only supported Link Addresses for wakeup. Update the setting
to support both MLD Address and Link Addresses for wakeup process.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-3-pkshih@realtek.com
|
|
The WOW wakeup control command is used to tell firmware the content
of wakeup feature. Use struct instead of macros to fill the data.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-2-pkshih@realtek.com
|
|
The set channel of RF part is to configure channel and bandwidth on a
register. The function to encode channel and bandwidth into register
value will be implemented by coming patch.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-8-pkshih@realtek.com
|
|
The set channel of BB part is the main part, which according to channel
and bandwidth to configure CCK SCO, RX gain of LNA and TIA programmed
in efuse for CCK and OFDM rate, and spur elimination of CSI and NBI tones.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-7-pkshih@realtek.com
|
|
The set channel is a key function to switch to specific operating channel.
For MAC part, configure hardware according to channel bandwidth, and
enable CCK rate for 2GHz band only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-6-pkshih@realtek.com
|
|
physical map
The calibration data is from physical map, including 1) thermal trim to
align output thermal value across chips, and 2) PA bias to transmit
expected power by controller.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-5-pkshih@realtek.com
|
|
Define specific efuse map for RTL8922D, including TSSI, RX gain, MAC
address, RFE type and etc. The additional fields comparing to existing
chips are BT setting (define BT switch GPIO, antenna number and etc) and
gain offset2 (define more fields like existing RX gain offset).
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-4-pkshih@realtek.com
|
|
ltc4286.c uses PMBus core symbols exported in the PMBUS namespace,
such as pmbus_do_probe(), but does not declare MODULE_IMPORT_NS("PMBUS").
Add the missing namespace import to avoid modpost warnings.
Fixes: 0c459759ca97 ("hwmon: (pmbus) Add ltc4286 driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260329170925.34581-5-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
pxe1610_probe() writes PMBUS_PAGE to select page 0 but does not check
the return value. If the write fails, subsequent register reads operate
on an indeterminate page, leading to silent misconfiguration.
Check the return value and propagate the error using dev_err_probe(),
which also handles -EPROBE_DEFER correctly without log spam.
Fixes: 344757bac526 ("hwmon: (pmbus) Add Infineon PXE1610 VR driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260329170925.34581-4-sanman.pradhan@hpe.com
[groeck: Fix "Fixes" SHA]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
i2c_smbus_read_block_data() can return 0, indicating a zero-length
read. When this happens, tps53679_identify_chip() accesses buf[ret - 1]
which is buf[-1], reading one byte before the buffer on the stack.
Fix by changing the check from "ret < 0" to "ret <= 0", treating a
zero-length read as an error (-EIO), which prevents the out-of-bounds
array access.
Also fix a typo in the adjacent comment: "if present" instead of
duplicate "if".
Fixes: 75ca1e5875fe ("hwmon: (pmbus/tps53679) Add support for TPS53685")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260329170925.34581-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The power on function is the first entry to power on hardware including
all MAC/BB/RF circuits, and then it becomes possible to do high level
operations, such as WiFi scan, connection.
If connection becomes unavailable, device stays into idle mode, calling
power off function to cut power.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-3-pkshih@realtek.com
|
|
The quota is used to configure memory size for TX/RX, and the definition
of registers includes H2C command, C2H event, WoWLAN reason, IMR of CMAC
and DMAC, ACK rate selector, RF kill GPIO, and BB functions of dynamic
initial gain and EDCCA. The layout of efuse block is to define logic
map of efuse, such as MAC address and RF calibration values.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-2-pkshih@realtek.com
|
|
The reported RX rate might be unexpected, causing kernel warns:
Rate marked as a VHT rate but data is invalid: MCS: 0, NSS: 0
WARNING: net/mac80211/rx.c:5491 at ieee80211_rx_list+0x183/0x1020 [mac80211]
As the RX rate can be index of an array under certain conditions, validate
it to prevent accessing array out-of-bound potentially.
Tested on HP Notebook P3S95EA#ACB (kernel 6.19.9-1-cachyos):
- No WARNING: net/mac80211/rx.c:5491 observed after the v2 patch.
The unexpected `NSS: 0, MCS: 0` VHT rate warnings are successfully
mitigated.
- The system remains fully stable through prolonged idle periods,
high network load, active Bluetooth A2DP usage, and multiple deep
suspend/resume cycles.
- Zero h2c timeouts or firmware lps state errors observed in dmesg.
Reported-by: Oleksandr Havrylov <goainwo@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CALdGYqSMUPnPfW-_q1RgYr0_SjoXUejAaJJr-o+jpwCk1S7ndQ@mail.gmail.com/
Tested-by: Oleksandr Havrylov <goainwo@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324011001.5742-1-pkshih@realtek.com
|
|
rtw89_phy_cfo_set_crystal_cap()
In the rtw89_phy_cfo_set_crystal_cap() function, for chips other than
RTL8852A/RTL8851B, the values read by rtw89_mac_read_xtal_si() are
stored into the local variables sc_xi_val and sc_xo_val. If either
read fails, these variables remain uninitialized, they are later
used to update cfo->crystal_cap and in debug print statements. This
can lead to undefined behavior.
Fix the issue by initializing sc_xi_val and sc_xo_val to zero,
like is implemented in vendor driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8379fa611536 ("rtw89: 8852c: add write/read crystal function in CFO tracking")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260323140613.1615574-1-a.velichayshiy@ispras.ru
|
|
Add the ID 0411:03a6 to the table to support an additional RTL8832CU
adapter: Buffalo WI-U3-2400XE2.
Link: https://github.com/morrownr/rtw89/commit/506d193b8cb7d6394509aebcf8de1531629f6100
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260320154136.5750-1-zenmchen@gmail.com
|
|
Add the ID 37ad:0103 to the table to support an additional RTL8832CU
adapter: TP-Link Archer TX50U.
Link: https://github.com/morrownr/rtl8852cu-20251113/issues/2
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260320093122.6754-1-zenmchen@gmail.com
|
|
On Radxa Rock 5B with a RTL8852BE combo WiFi/BT card, the efuse
physical map dump intermittently fails with -EBUSY during probe.
The failure occurs in rtw89_dump_physical_efuse_map_ddv() where
read_poll_timeout_atomic() times out waiting for the B_AX_EF_RDY
bit after 1 second.
The root cause is a timing race during boot: the WiFi driver's
chip initialization (firmware download via PCIe) overlaps with
Bluetooth firmware download to the same combo chip via USB. This
can leave the efuse controller temporarily unavailable when the
WiFi driver attempts to read the efuse map.
The firmware download path retries up to 5 times, but the efuse
read that follows has no similar logic. Address this by adding
retry loop logic (also up to 5 attempts) around physical efuse
map dump.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260317112155.1939569-1-christianshewitt@gmail.com
|
|
When filling out the TX descriptor, Null data frames are treated like
management frames, but QOS Null data frames are treated like normal
data frames. Somehow this causes a problem for the firmware.
When connected to a network in the 2.4 GHz band, wpa_supplicant (or
NetworkManager?) triggers a scan every five minutes. During these scans
mac80211 transmits many QOS Null frames in quick succession. Because
these frames are marked with IEEE80211_TX_CTL_REQ_TX_STATUS, rtw88
asks the firmware to report the TX ACK status for each of these frames.
Sometimes the firmware can't process the TX status requests quickly
enough, they add up, it only processes some of them, and then marks
every subsequent TX status report with the wrong number.
The symptom is that after a while the warning "failed to get tx report
from firmware" appears every five minutes.
This problem apparently happens only with the older RTL8723D, RTL8821A,
RTL8812A, and probably RTL8703B chips.
Treat QOS Null data frames the same way as Null data frames. This seems
to avoid the problem.
Tested with RTL8821AU, RTL8723DU, RTL8811CU, and RTL8812BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/2b53fb0d-b1ed-47b6-8caa-2bb9ae2acb80@gmail.com
|
|
On an HP laptop (P3S95EA#ACB) equipped with a Realtek RTL8821CE 802.11ac
PCIe adapter (PCI ID: 10ec:c821), the system experiences a hard lockup
(complete freeze of the UI and kernel, sysrq doesn't work, requires
holding the power button) when the WiFi adapter enters the power
saving state. Disable PCI ASPM to avoid system freeze.
In addition, driver throws messages periodically. Though this doesn't
always cause unstable connection, missing H2C commands might cause
unpredictable results. Disable deep LPS to avoid this as well.
rtw88_8821ce 0000:13:00.0: firmware failed to leave lps state
rtw88_8821ce 0000:13:00.0: failed to send h2c command
rtw88_8821ce 0000:13:00.0: failed to send h2c command
Tested on HP Notebook P3S95EA#ACB (kernel 6.19.7-1-cachyos):
- No hard freeze observed during idle or active usage.
- Zero h2c or lps errors in dmesg across idle (10 min),
load stress (100MB download), and suspend/resume cycle.
- Both quirk flags confirmed active via sysfs without any
manual modprobe parameters.
Reported-by: Oleksandr Havrylov <goainwo@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CALdGYqSQ1Ko2TTBhUizMu_FvLMUAuQfFrVwS10n_C-LSQJQQkQ@mail.gmail.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Oleksandr Havrylov <goainwo@gmail.com>
Link: https://patch.msgid.link/20260316035635.16550-1-pkshih@realtek.com
|
|
Correct a function parameter name (s/page/folio/) and add function
return value sections for multiple functions to eliminate
kernel-doc warnings:
Warning: include/linux/sunrpc/xdr.h:298 function parameter 'folio' not
described in 'xdr_set_scratch_folio'
Warning: include/linux/sunrpc/xdr.h:337 No description found for return
value of 'xdr_stream_remaining'
Warning: include/linux/sunrpc/xdr.h:357 No description found for return
value of 'xdr_align_size'
Warning: include/linux/sunrpc/xdr.h:374 No description found for return
value of 'xdr_pad_size'
Warning: include/linux/sunrpc/xdr.h:387 No description found for return
value of 'xdr_stream_encode_item_present'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rdma_prepare_write_chunk() and svc_rdma_prepare_reply_chunk()
contain identical code for linking RDMA R/W work requests onto a
Send context's WR chain. This duplication increases maintenance
burden and risks divergent bug fixes.
Introduce svc_rdma_cc_link_wrs() to consolidate the WR chain
linking logic. The helper walks the chunk context's rwctxts list,
chains each WR via rdma_rw_ctx_wrs(), and updates the Send
context's chain head and SQE count. Completion signaling is
requested only for the tail WR (posted first).
No functional change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Previously, Write chunk RDMA Writes were posted via a separate
ib_post_send() call with their own completion handler. Each Write
chunk incurred a doorbell and generated a completion event.
Link Write chunk WRs onto the RPC Reply's Send WR chain so that a
single ib_post_send() call posts both the RDMA Writes and the Send
WR. A single completion event signals that all operations have
finished. This reduces both doorbell rate and completion rate, as
well as eliminating the latency of a round-trip between the Write
chunk completion and the subsequent Send WR posting.
The lifecycle of Write chunk resources changes: previously, the
svc_rdma_write_done() completion handler released Write chunk
resources when RDMA Writes completed. With WR chaining, resources
remain live until the Send completion. A new sc_write_info_list
tracks Write chunk metadata attached to each Send context, and
svc_rdma_write_chunk_release() frees these resources when the
Send context is released.
The svc_rdma_write_done() handler now handles only error cases.
On success it returns immediately since the Send completion handles
resource release. On failure (WR flush), it closes the connection
to signal to the client that the RPC Reply is incomplete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I can't think of a reason why svcrdma is using the PD's device. Most
other consumers of the IB DMA API use the ib_device pointer from the
connection's rdma_cm_id.
I don't think there's any functional difference between the two, but
it is a little confusing to see some uses of rdma_cm_id and some of
ib_pd.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I can't think of a reason why svcrdma is using the PD's device. Most
other consumers of the IB DMA API use the ib_device pointer from the
connection's rdma_cm_id.
I don't believe there's any functional difference between the two,
but it is a little confusing to see some uses of rdma_cm_id->device
and some of ib_pd->device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When the Send Queue fills, multiple threads may wait for SQ slots.
The previous implementation had no ordering guarantee, allowing
starvation when one thread repeatedly acquires slots while others
wait indefinitely.
Introduce a ticket-based fair queuing system. Each waiter takes a
ticket number and is served in FIFO order. This ensures forward
progress for all waiters when SQ capacity is constrained.
The implementation has two phases:
1. Fast path: attempt to reserve SQ slots without waiting
2. Slow path: take a ticket, wait for turn, then wait for slots
The ticket system adds two atomic counters to the transport:
- sc_sq_ticket_head: next ticket to issue
- sc_sq_ticket_tail: ticket currently being served
A dedicated wait queue (sc_sq_ticket_wait) handles ticket
ordering, separate from sc_send_wait which handles SQ capacity.
This separation ensures that send completions (the high-frequency
wake source) wake only the current ticket holder rather than all
queued waiters. Ticket handoff wakes only the ticket wait queue,
and each ticket holder that exits via connection close propagates
the wake to the next waiter in line.
When a waiter successfully reserves slots, it advances the tail
counter and wakes the next waiter. This creates an orderly handoff
that prevents starvation while maintaining good throughput on the
fast path when contention is low.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_alloc_arg() invokes alloc_pages_bulk() with the full rq_maxpages
count (~259 for 1MB messages) for the rq_respages array, causing a
full-array scan despite most slots holding valid pages.
svc_rqst_release_pages() NULLs only the range
[rq_respages, rq_next_page)
after each RPC, so only that range contains NULL entries. Limit the
rq_respages fill in svc_alloc_arg() to that range instead of
scanning the full array.
svc_init_buffer() initializes rq_next_page to span the entire
rq_respages array, so the first svc_alloc_arg() call fills all
slots.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The rq_pages array holds pages allocated for incoming RPC requests.
Two transport receive paths NULL entries in rq_pages to prevent
svc_rqst_release_pages() from freeing pages that the transport has
taken ownership of:
- svc_tcp_save_pages() moves partial request data pages to
svsk->sk_pages during multi-fragment TCP reassembly.
- svc_rdma_clear_rqst_pages() moves request data pages to
head->rc_pages because they are targets of active RDMA Read WRs.
A new rq_pages_nfree field in struct svc_rqst records how many
entries were NULLed. svc_alloc_arg() uses it to refill only those
entries rather than scanning the full rq_pages array. In steady
state, the transport NULLs a handful of entries per RPC, so the
allocator visits only those entries instead of the full ~259 slots
(for 1MB messages).
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rdma_save_io_pages() transfers response pages to the send
context and sets those slots to NULL. It then resets rq_next_page to
equal rq_respages, hiding the NULL region from
svc_rqst_release_pages().
Now that svc_rqst_release_pages() handles NULL entries, this reset
is no longer necessary. Removing it preserves the invariant that the
range [rq_respages, rq_next_page) accurately describes how many
response pages were consumed, enabling a subsequent optimization in
svc_alloc_arg() that refills only the consumed range.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rqst_release_pages() releases response pages between rq_respages
and rq_next_page. It currently passes the entire range to
release_pages(), which does not expect NULL entries.
A subsequent patch preserves the rq_next_page pointer in
svc_rdma_save_io_pages() so that it accurately records how many
response pages were consumed. After that change, the range
[rq_respages, rq_next_page)
can contain NULL entries where pages have already been transferred
to a send context.
Iterate through the range entry by entry, skipping NULLs, to handle
this case correctly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
struct svc_rqst uses a single dynamically-allocated page array
(rq_pages) for both the incoming RPC Call message and the outgoing
RPC Reply message. rq_respages is a sliding pointer into rq_pages
that each transport receive path must compute based on how many
pages the Call consumed. This boundary tracking is a source of
confusion and bugs, and prevents an RPC transaction from having
both a large Call and a large Reply simultaneously.
Allocate rq_respages as its own page array, eliminating the boundary
arithmetic. This decouples Call and Reply buffer lifetimes,
following the precedent set by rq_bvec (a separate dynamically-
allocated array for I/O vectors).
Each svc_rqst now pins twice as many pages as before. For a server
running 16 threads with a 1MB maximum payload, the additional cost
is roughly 16MB of pinned memory. The new dynamic svc thread count
facility keeps this overhead minimal on an idle server. A subsequent
patch in this series limits per-request repopulation to only the
pages released during the previous RPC, avoiding a full-array scan
on each call to svc_alloc_arg().
Note: We've considered several alternatives to maintaining a full
second array. Each alternative reintroduces either boundary logic
complexity or I/O-path allocation pressure.
rq_next_page is initialized in svc_alloc_arg() and svc_process()
during Reply construction, and in svc_rdma_recvfrom() as a
precaution on error paths. Transport receive paths no longer compute
it from the Call size.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rqst_replace_page() builds the Reply buffer by advancing
rq_next_page through the response page range. The bounds
check validates rq_next_page against the full rq_pages array,
but the valid range for rq_next_page is
[rq_respages, rq_page_end].
Use those bounds instead.
This is correct today because rq_respages and rq_page_end
both point into rq_pages, and it prepares for a subsequent
change that separates the Reply page array from rq_pages.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFS clients may bypass restrictive directory permissions by using
open_by_handle() (or other available OS system call) to guess the
filehandles for files below that directory.
In order to harden knfsd servers against this attack, create a method to
sign and verify filehandles using SipHash-2-4 as a MAC (Message
Authentication Code). According to
https://cr.yp.to/siphash/siphash-20120918.pdf, SipHash can be used as a
MAC, and our use of SipHash-2-4 provides a low 1 in 2^64 chance of forgery.
Filehandles that have been signed cannot be tampered with, nor can
clients reasonably guess correct filehandles and hashes that may exist in
parts of the filesystem they cannot access due to directory permissions.
Append the 8 byte SipHash to encoded filehandles for exports that have set
the "sign_fh" export option. Filehandles received from clients are
verified by comparing the appended hash to the expected hash. If the MAC
does not match the server responds with NFS error _STALE. If unsigned
filehandles are received for an export with "sign_fh" they are rejected
with NFS error _STALE.
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In order to signal that filehandles on this export should be signed, add a
"sign_fh" export option. Filehandle signing can help the server defend
against certain filehandle guessing attacks.
Setting the "sign_fh" export option sets NFSEXP_SIGN_FH. In a future patch
NFSD uses this signal to append a MAC onto filehandles for that export.
While we're in here, tidy a few stray expflags to more closely align to the
export flag order.
Link: https://lore.kernel.org/linux-nfs/cover.1772022373.git.bcodding@hammerspace.com
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A future patch will enable NFSD to sign filehandles by appending a Message
Authentication Code(MAC). To do this, NFSD requires a secret 128-bit key
that can persist across reboots. A persisted key allows the server to
accept filehandles after a restart. Enable NFSD to be configured with this
key via the netlink interface.
Link: https://lore.kernel.org/linux-nfs/cover.1772022373.git.bcodding@hammerspace.com
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 1e8e9913672a ("nfsd: fix heap overflow in NFSv4.0 LOCK
replay cache") capped the replay cache copy at NFSD4_REPLAY_ISIZE
to prevent a heap overflow, but set rp_buflen to zero when the
encoded response exceeded the inline buffer. A retransmitted LOCK
reaching the replay path then produced only a status code with no
operation body, resulting in a malformed XDR response.
When the encoded response exceeds the 112-byte inline rp_ibuf, a
buffer is kmalloc'd to hold it. If the allocation fails, rp_buflen
remains zero, preserving the behavior from the capped-copy fix.
The buffer is freed when the stateowner is released or when a
subsequent operation's response fits in the inline buffer.
Fixes: 1e8e9913672a ("nfsd: fix heap overflow in NFSv4.0 LOCK replay cache")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace the global state_lock spinlock with a per-nfsd_net deleg_lock.
The state_lock was only used to protect delegation lifecycle operations
(the del_recall_lru list and delegation hash/unhash), all of which are
scoped to a single network namespace. Making the lock per-net removes
a source of unnecessary contention between containers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace the single interleaved queue (which mixed cache_request and
cache_reader entries distinguished by a ->reader flag) with two
dedicated lists: cd->requests for upcall requests and cd->readers
for open file handles.
Readers now track their position via a monotonically increasing
sequence number (next_seqno) rather than by their position in the
shared list. Each cache_request is assigned a seqno when enqueued,
and a new cache_next_request() helper finds the next request at or
after a given seqno.
This eliminates the cache_queue wrapper struct entirely, simplifies
the reader-skipping loops in cache_read/cache_poll/cache_ioctl/
cache_release, and makes the data flow easier to reason about.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The queue_wait waitqueue is currently a file-scoped global, so a
wake_up for one cache_detail wakes pollers on all caches. Convert it
to a per-cache-detail field so that only pollers on the relevant cache
are woken.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The global queue_lock serializes all upcall queue operations across
every cache_detail instance. Convert it to a per-cache-detail spinlock
so that different caches (e.g. auth.unix.ip vs nfsd.fh) no longer
contend with each other on queue operations.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
