| Age | Commit message (Collapse) | Author |
|---|
|
Replace all instances of percent-style string formatting with
f-strings across the rvgen codebase. This modernizes the string
formatting to use Python 3.6+ features, providing clearer and more
maintainable code while improving runtime performance.
The conversion handles all formatting cases including simple variable
substitution, multi-variable formatting, and complex format specifiers.
Dynamic width formatting is converted from "%*s" to "{var:>{width}}"
using proper alignment syntax. Template strings for generated C code
properly escape braces using double-brace syntax to produce literal
braces in the output.
F-strings provide approximately 2x performance improvement over percent
formatting and are the recommended approach in modern Python.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-4-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Remove bare except clauses from the generator module that were
catching all exceptions including KeyboardInterrupt and SystemExit.
This follows the same exception handling improvements made in the
previous AutomataError commit and addresses PEP 8 violations.
The bare except clause in __create_directory was silently catching
and ignoring all errors after printing a message, which could mask
serious issues. For __write_file, the bare except created a critical
bug where the file variable could remain undefined if open() failed,
causing a NameError when attempting to write to or close the file.
These methods now let OSError propagate naturally, allowing callers
to handle file system errors appropriately. This provides clearer
error reporting and allows Python's exception handling to show
complete stack traces with proper error types and locations.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-3-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Replace the generic except Exception block with a custom AutomataError
class that inherits from Exception. This provides more precise exception
handling for automata parsing and validation errors while avoiding
overly broad exception catches that could mask programming errors like
SyntaxError or TypeError.
The AutomataError class is raised when DOT file processing fails due to
invalid format, I/O errors, or malformed automaton definitions. The
main entry point catches this specific exception and provides a
user-friendly error message to stderr before exiting.
Also, replace generic exceptions raising in HA and LTL with
AutomataError.
Co-authored-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-2-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add the deadline monitors collection to validate the deadline scheduler,
both for deadline tasks and servers.
The currently implemented monitors are:
* nomiss:
validate dl entities run to completion before their deadiline
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20260330111010.153663-13-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Some utility functions on sched_dl_entity can be useful outside of
deadline.c , for instance for modelling, without relying on raw
structure fields.
Move functions like dl_task_of and dl_is_implicit to deadline.h to make
them available outside.
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20260330111010.153663-12-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add the following tracepoints:
* sched_dl_throttle(dl_se, cpu, type):
Called when a deadline entity is throttled
* sched_dl_replenish(dl_se, cpu, type):
Called when a deadline entity's runtime is replenished
* sched_dl_update(dl_se, cpu, type):
Called when a deadline entity updates without throttle or replenish
* sched_dl_server_start(dl_se, cpu, type):
Called when a deadline server is started
* sched_dl_server_stop(dl_se, cpu, type):
Called when a deadline server is stopped
Those tracepoints can be useful to validate the deadline scheduler with
RV and are not exported to tracefs.
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20260330111010.153663-11-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The special per-object monitor type was just introduced in RV, this
requires the user to define some functions and type specific to the
object.
Adapt rvgen to add stub definitions for the monitor_target type and
other modifications required to create per-object monitors.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
RV deterministic and hybrid automata currently only support global,
per-cpu and per-task monitors. It isn't possible to write a model that
would follow some different type of object, like a deadline entity or a
lock.
Define the generic per-object monitor implementation which shares part
of the implementation with the per-task monitors.
The user needs to provide an id for the object (e.g. pid for tasks) and
define the data type for the monitor_target (e.g. struct task_struct *
for tasks). Both are supplied to the event handlers, as the id may not
be easily available in the target.
The monitor storage (e.g. the rv monitor, pointer to the target, etc.)
is stored in a hash table indexed by id. Monitor storage objects are
automatically allocated unless specified otherwise (e.g. if the creation
context is unsafe for allocation).
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The opid monitor validates that wakeup and need_resched events only
occur with interrupts and preemption disabled by following the
preemptirq tracepoints.
As reported in [1], those tracepoints might be inaccurate in some
situations (e.g. NMIs).
Since the monitor doesn't validate other ordering properties, remove the
dependency on preemptirq tracepoints and convert the monitor to a hybrid
automaton to validate the constraint during event handling.
This makes the monitor more robust by also removing the workaround for
interrupts missing the preemption tracepoints, which was working on
PREEMPT_RT only and allows the monitor to be built on kernels without
the preemptirqs tracepoints.
[1] - https://lore.kernel.org/lkml/20250625120823.60600-1-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add a sample monitor to showcase hybrid/timed automata.
The stall monitor identifies tasks stalled for longer than a threshold
and reacts when that happens.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Describe theory and implementation of hybrid automata in the dedicated
page hybrid_automata.rst
Include a section on how to integrate a hybrid automaton in
monitor_synthesis.rst
Also remove a hanging $ in deterministic_automata.rst
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20260330111010.153663-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add the possibility to parse dot files as hybrid automata and generate
the necessary code from rvgen.
Hybrid automata are very similar to deterministic ones and most
functionality is shared, the dot files include also constraints together
with event names (separated by ;) and state names (separated by \n).
The tool can now generate the appropriate code to validate constraints
at runtime according to the dot specification.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Currently the automata parser assumes event strings don't have any
space, this stands true for event names, but can be a wrong assumption
if we want to store other information in the event strings (e.g.
constraints for hybrid automata).
Adapt the parser logic to allow spaces in the event strings.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Deterministic automata define which events are allowed in every state,
but cannot define more sophisticated constraint taking into account the
system's environment (e.g. time or other states not producing events).
Add the Hybrid Automata monitor type as an extension of Deterministic
automata where each state transition is validating a constraint on a
finite number of environment variables.
Hybrid automata can be used to implement timed automata, where the
environment variables are clocks.
Also implement the necessary functionality to handle clock constraints
(ns or jiffy granularity) on state and events.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The DA event handling functions are mostly duplicated because the
per-task monitors need to propagate the task struct while others do not.
Unify the functions, handle the difference by always passing an
identifier which is the task's pid for per-task monitors but is ignored
for the other types. Only keep the actual tracepoint calling separated.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Replace the raw EDID byte-walking in parse_amd_vsdb() with a read
from connector->display_info.amd_vsdb, now populated by drm_edid.
Factor out panel type determination into dm_set_panel_type(), which
checks VSDB panel_type, DPCD ext caps, and a luminance heuristic as
fallbacks.
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260327082342.1286878-3-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Parse the AMD VSDB v3 from CTA extension blocks and store the result
in struct drm_amd_vsdb_info, a new field of drm_display_info. This
includes replay mode, panel type, and luminance ranges.
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260327082342.1286878-2-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
With clang and W=1:
drivers/video/fbdev/aty/atyfb_base.c:2327:24: warning: variable 'fb_list' set but not used [-Wunused-but-set-global]
2327 | static struct fb_info *fb_list = NULL;
Indeed, the last user of fb_list was removed in 2004, while the actual
linked list was removed in 2002.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603300931.osMYxYZ7-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Introduce the new max_open_zones option to allow specifying a limit on
the maximum number of open zones of a zloop device. This change allows
creating a zloop device that can more closely mimick the characteristics
of a physical SMR drive.
When set to a non zero value, only up to max_open_zones zones can be in
the implicit open (BLK_ZONE_COND_IMP_OPEN) and explicit open
(BLK_ZONE_COND_EXP_OPEN) conditions at any time. The transition to the
implicit open condition of a zone on a write operation can result in an
implicit close of an already implicitly open zone. This is handled in
the function zloop_do_open_zone(). This function also handles
transitions to the explicit open condition. Implicit close transitions
are handled using an LRU ordered list of open zones which is managed
using the helper functions zloop_lru_rotate_open_zone() and
zloop_lru_remove_open_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260326203245.946830-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 8545d9bc4bd0801e0bdfbfdfdc2532ff31236ddf.
Unbeknownst to me, and unremarked upon by the checkpatch maintainer, this
same problem was also solved in the mm tree. Fixing it once is enough, so
this one comes out.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Adds short description for two new sysfs entries, ctgp_offset and
usb_c_power_priority, to the documentation of uniwill laptops.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-6-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Uses the more fine granular and/or new feature defines to enable more
features across the TUXEDO device lineup.
Also adds features to TUXEDO devices that where already present in the
driver, but not tested until now.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-5-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add alternative XMG Fusion system vendor name and clarify edition in ident.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-4-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On some devices Uniwill offers the option to set the USB-C port to
prioritise charging or performance. This patch exposes this setting to the
userspace via sysfs for all TUXEDO devices supporting it.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-3-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Split hwmon feature define in smaller parts to accommodate for diverse
hardware. You can now specify the presence of a cpu and/or a gpu temp
sensor separately and if one or 2 fans exists.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Allows uniwill-laptop feature work that depends on changes in the fixes
branch proceed.
|
|
Add TDP data for laptop model GU605MU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model FA607NU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GV302XU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
fix mute/micmute LEDs and headset microphone for Acer Swift SFG14-73.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220279
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260331094614.186063-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Lenovo Yoga Pro 7 14IMH9 (DMI: 83E2) shares PCI SSID 17aa:3847
with the Legion 7 16ACHG6, but has a different codec subsystem ID
(17aa:38cf). The existing SND_PCI_QUIRK for 17aa:3847 applies
ALC287_FIXUP_LEGION_16ACHG6, which attempts to initialize an external
I2C amplifier (CLSA0100) that is not present on the Yoga Pro 7 14IMH9.
As a result, pin 0x17 (bass speakers) is connected to DAC 0x06 which
has no volume control, making hardware volume adjustment completely
non-functional. Audio is either silent or at maximum volume regardless
of the slider position.
Add a HDA_CODEC_QUIRK entry using the codec subsystem ID (17aa:38cf)
to correctly identify the Yoga Pro 7 14IMH9 and apply
ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN, which redirects pin 0x17 to
DAC 0x02 and restores proper volume control. The existing Legion entry
is preserved unchanged.
This follows the same pattern used for 17aa:386e, where Legion Y9000X
and Yoga Pro 7 14ARP8 share a PCI SSID but are distinguished via
HDA_CODEC_QUIRK.
Link: https://github.com/nomad4tech/lenovo-yoga-pro-7-linux
Tested-by: Alexander Savenko <alex.sav4387@gmail.com>
Signed-off-by: Alexander Savenko <alex.sav4387@gmail.com>
Link: https://patch.msgid.link/20260331082929.44890-1-alex.sav4387@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes.
Fixes: 20f6a05ef635 ("bridge: mrp: Rework the MRP netlink interface")
Fixes: 7ab1748e4ce6 ("bridge: mrp: Extend MRP netlink interface for configuring MRP interconnect")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260328063000.1845376-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add ATTR CSR bit field definitions for the DMA engine TLP header
configuration registers:
AW_CFG: RDE_ATTR[17:15], RQM_ATTR[14:12], TQM_ATTR[11:9]
AR_CFG: TDE_ATTR[17:15], RQM_ATTR[14:12], TQM_ATTR[11:9]
These fields control the PCIe TLP attribute bits for outbound
transactions from the TQM, RQM, RDE (write path), and TDE (read path)
DMA engines. An enum is added with standard PCIe TLP attribute values:
NS (No Snoop), RO (Relaxed Ordering), and IDO (ID-based Ordering).
Read the PCIe Relaxed Ordering capability at probe time and store it in
fbnic_dev. Configure Relaxed Ordering on the PCIe TLP attributes in
fbnic_mbx_init_desc_ring when the capability is enabled. For the write
path (AW_CFG), set RO on RDE and TQM attributes. For the read path
(AR_CFG), set RO on all three attributes (TDE, RQM, TQM). This allows
the PCIe fabric to reorder these transactions for improved throughput.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260327204445.3074446-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With fallocate support, xfstest unit generic/213 fails with
QA output created by 213
We should get: fallocate: No space left on device
Strangely, xfs_io sometimes says "Success" when something went wrong
-fallocate: No space left on device
+fallocate: File too large
because sb->s_maxbytes is set to the volume size.
To be in line with other non-extent-based filesystems, set to max volume
size possible with the cluster size of the volume.
Signed-off-by: David Timber <dxdt@dev.snart.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
snd_soc_unbind_card() calls snd_soc_flush_all_delayed_work() (A),
but it will be called in soc_cleanup_card_resources() (B).
It is duplicated, let's remove it.
(B) static void soc_cleanup_card_resources(...)
{
...
/* flush delayed work before removing DAIs and DAPM widgets */
(A)' snd_soc_flush_all_delayed_work(card);
...
}
static void snd_soc_unbind_card(...)
{
if (snd_soc_card_is_instantiated(card)) {
card->instantiated = false;
(A) snd_soc_flush_all_delayed_work(card);
(B) soc_cleanup_card_resources(card);
}
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h5pwdc3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rust Binder exposes information about transactions that are sent in
various ways: printing to the kernel log, tracepoints, files in
binderfs, and the upcoming netlink support. Currently all these
mechanisms use disparate ways of obtaining the same information, so
let's introduce a single Info struct that collects all the required
information in a single place, so that all of these different mechanisms
can operate in a more uniform way.
For now, the new info struct is only used to replace a few things:
* The BinderTransactionDataSg struct that is passed as an argument to
several methods is removed as the information is moved into the new
info struct and passed down that way.
* The oneway spam detection fields on Transaction and Allocation can be
removed, as the information can be returned to the caller via the
mutable info struct instead.
But several other uses of the info struct are planned in follow-up
patches.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260306-transaction-info-v1-1-fda58fca558b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
Add a driver so that Linux can set the mux based on the interrupt
mapping in the devicetree.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add support for interrupts to the PolarFire SoC GPIO driver. Each GPIO
has an independent interrupt that is wired to an interrupt mux that sits
between the controllers and the PLIC. The SoC has more GPIO lines than
connections from the mux to the PLIC, so some GPIOs must share PLIC
interrupts. The configuration is not static and is set at runtime,
conventionally by the platform's firmware. CoreGPIO, the version
intended for use in the FPGA fabric has two interrupt output ports, one
is IO_NUM bits wide, as is used in the hardened cores, and the other is
a single bit with all lines ORed together.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources()
has allocated args.zones_cond, the memory is leaked because no error path
frees it.
Fixes: 6e945ffb6555 ("block: use zone condition to determine conventional zones")
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://patch.msgid.link/20260331111216.24242-1-liu.yun@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit c073f0757663 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Currently, SND_SOC_INTEL_SOUNDWIRE_SOF_MACH selects PINCTRL_CS42L43
without also selecting or depending on PINCTRL, despite PINCTRL_CS42L43
depending on PINCTRL.
See the following Kbuild warning:
WARNING: unmet direct dependencies detected for PINCTRL_CS42L43
Depends on [n]: PINCTRL [=n] && MFD_CS42L43 [=m]
Selected by [m]:
- SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=m] && SOUND [=y] && SND [=m] && SND_SOC [=m] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_SOF_INTEL_COMMON [=m] || !SND_SOC_SOF_INTEL_COMMON [=m]) && SND_SOC_SOF_INTEL_SOUNDWIRE [=m] && I2C [=y] && SPI_MASTER [=y] && ACPI [=y] && (MFD_INTEL_LPSS [=n] || COMPILE_TEST [=y]) && (SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=n] || COMPILE_TEST [=y]) && SOUNDWIRE [=m]
In response to v1 of this patch [1], Arnd pointed out that there is
no compile-time dependency sof_sdw and the PINCTRL_CS42L43 driver.
After testing, I can confirm that the kernel compiled with
SND_SOC_INTEL_SOUNDWIRE_SOF_MACH enabled and PINCTRL_CS42L43 disabled.
This unmet dependency was detected by kconfirm, a static analysis
tool for Kconfig.
Link: https://lore.kernel.org/all/b8aecc71-1fed-4f52-9f6c-263fbe56d493@app.fastmail.com/ [1]
Fixes: c073f0757663 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260325001522.1727678-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When LOOP_CONFIGURE is called with LO_FLAGS_PARTSCAN, the following
sequence occurs:
1. disk_force_media_change() sets GD_NEED_PART_SCAN
2. Uevent suppression is lifted and a KOBJ_CHANGE uevent is sent
3. loop_global_unlock() releases the lock
4. loop_reread_partitions() calls bdev_disk_changed() to scan
There is a race between steps 2 and 4: when udev receives the uevent
and opens the device before loop_reread_partitions() runs,
blkdev_get_whole() in bdev.c sees GD_NEED_PART_SCAN set and calls
bdev_disk_changed() for a first scan. Then loop_reread_partitions()
does a second scan. The open_mutex serializes these two scans, but
does not prevent both from running.
The second scan in bdev_disk_changed() drops all partition devices
from the first scan (via blk_drop_partitions()) before re-adding
them, causing partition block devices to briefly disappear. This
breaks any systemd unit with BindsTo= on the partition device: systemd
observes the device going dead, fails the dependent units, and does
not retry them when the device reappears.
Fix this by removing the GD_NEED_PART_SCAN set from
disk_force_media_change() entirely. None of the current callers need
the lazy on-open partition scan triggered by this flag:
- floppy: sets GENHD_FL_NO_PART, so disk_has_partscan() is always
false and GD_NEED_PART_SCAN has no effect.
- loop (loop_configure, loop_change_fd): when LO_FLAGS_PARTSCAN is
set, loop_reread_partitions() performs an explicit scan. When not
set, GD_SUPPRESS_PART_SCAN prevents the lazy scan path.
- loop (__loop_clr_fd): calls bdev_disk_changed() explicitly if
LO_FLAGS_PARTSCAN is set.
- nbd (nbd_clear_sock_ioctl): capacity is set to zero immediately
after; nbd manages GD_NEED_PART_SCAN explicitly elsewhere.
With GD_NEED_PART_SCAN no longer set by disk_force_media_change(),
udev opening the loop device after the uevent no longer triggers a
redundant scan in blkdev_get_whole(), and only the single explicit
scan from loop_reread_partitions() runs.
A regression test for this bug has been submitted to blktests:
https://github.com/linux-blktests/blktests/pull/240.
Fixes: 9f65c489b68d ("loop: raise media_change event")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20260331105130.1077599-1-daan@amutable.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The TCG Opal device could enter a state where no new session can be
created, blocking even Discovery or PSID reset. While a power cycle
or waiting for the timeout should work, there is another possibility
for recovery: using the Stack Reset command.
The Stack Reset command is defined in the TCG Storage Architecture Core
Specification and is mandatory for all Opal devices (see Section 3.3.6
of the Opal SSC specification).
This patch implements the Stack Reset command. Sending it should clear
all active sessions immediately, allowing subsequent commands to run
successfully. While it is a TCG transport layer command, the Linux
kernel implements only Opal ioctls, so it makes sense to use the
IOC_OPAL ioctl interface.
The Stack Reset takes no arguments; the response can be success or pending.
If the command reports a pending state, userspace can try to repeat it;
in this case, the code returns -EBUSY.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Ondrej Kozina <okozina@redhat.com>
Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix screenpad brightness range being too limited without reason:
testing this patch on a Zenbook Duo showed the hardware minimum not being
too low, therefore allow the user to configure the entire range, and
expose to userspace the hardware brightness range and value.
Fixes: 2c97d3e55b70 ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix illogical screen off control by hardcoding 0 and 1 depending on the
requested brightness and also do not rely on the last screenpad power
state to issue screen brightness commands.
Fixes: 2c97d3e55b70 ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-2-denis.benato@linux.dev
Link: https://patch.msgid.link/20260326231154.856729-2-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
Fixes: 25f9b0d35155 ("misc/mei: Allow building Intel ME interface on non-x86")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8e2646fb71b148b3d38beb13f19b14e3634a1e1a.1769541024.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
some devices started to show long resume times (5-7 seconds).
This happens as mei falsely detects unready hardware,
starts parallel link reset flow and triggers link reset timeouts
in the resume callback.
Address it by performing detection of unready hardware only
when driver is in the MEI_DEV_ENABLED state instead of blacklisting
states as done in the original patch.
This eliminates active waitqueue check as in MEI_DEV_ENABLED state
there will be no active waitqueue.
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221023
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260330083830.536056-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When declaring an immutable global variable in Rust, the compiler checks
that it looks thread safe, because it is generally safe to access said
global variable. When using C bindings types for these globals, we don't
really want this check, because it is conservative and assumes pointers
are not thread safe.
In the case of BINDER_VM_OPS, this is a challenge when combined with the
patch 'userfaultfd: introduce vm_uffd_ops' [1], which introduces a
pointer field to vm_operations_struct. It previously only held function
pointers, which are considered thread safe.
Rust Binder should not be assuming that vm_operations_struct contains no
pointer fields, so to fix this, use AssertSync (which Rust Binder has
already declared for another similar global of type struct
file_operations with the same problem). This ensures that even if
another commit adds a pointer field to vm_operations_struct, this does
not cause problems.
Fixes: 8ef2c15aeae0 ("rust_binder: check ownership before using vma")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121235.tpnRxFKO-lkp@intel.com/
Link: https://lore.kernel.org/r/20260306171815.3160826-8-rppt@kernel.org [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260314111951.4139029-1-aliceryhl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Switch device_set_node to set_primary_fwnode, so that the ACPI fwnode
does not overwrite the of_node with NULL.
This allows MFD children with both OF nodes and ACPI handles to have OF
nodes again.
Cc: stable@vger.kernel.org
Fixes: 51e3b257099d ("mfd: core: Make use of device_set_node()")
Signed-off-by: Brian Mak <makb@juniper.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260325223024.35992-1-makb@juniper.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
