| Age | Commit message (Collapse) | Author |
|---|
|
There are two potential problems in free_reserved_area():
* it may free a page with not-existent buddy page
* it may be passed a virtual address from an alias mapping that won't
be properly translated by virt_to_page(), for example a symbol on arm64
While first issue is quite theoretical and the second one does not manifest
itself because all the callers do the right thing, it is easy to make
free_reserved_area() robust enough to avoid these potential issues.
Replace the loop by virtual address with a loop by pfn that uses
for_each_valid_pfn() and use __pa() or __pa_symbol() depending on the
virtual mapping alias to correctly determine the loop boundaries.
Link: https://patch.msgid.link/20260323074836.3653702-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
free_reserved_area() is related to memblock as it frees reserved memory
back to the buddy allocator, similar to what memblock_free_late() does.
Move free_reserved_area() to mm/memblock.c to prepare for further
consolidation of the functions that free reserved memory.
No functional changes.
Link: https://patch.msgid.link/20260323074836.3653702-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
opal-core allocates buffers with alloc_pages_exact(), but then
marks them as reserved and frees using free_reserved_area().
This is completely unnecessary and the pages allocated with
alloc_pages_exact() can be naturally freed with free_pages_exact().
Replace freeing of memory in opalcore_cleanup() with
free_pages_exact() and simplify allocation code so that it won't mark
allocated pages as reserved.
Link: https://patch.msgid.link/20260323074836.3653702-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
fadump allocates buffers with alloc_pages_exact(), but then marks them
as reserved and frees using free_reserved_area().
This is completely unnecessary and the pages allocated with
alloc_pages_exact() can be naturally freed with free_pages_exact().
Replace freeing of memory in fadump_free_buffer() with
free_pages_exact() and simplify allocation code so that it won't mark
allocated pages as reserved.
Link: https://patch.msgid.link/20260323074836.3653702-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
free_reserved_area() expects end parameter to point to the first address
after the area, but reserve_mem_release_by_name() passes it the last
address inside the area.
Remove subtraction of one in calculation of the area end.
Fixes: 74e2498ccf7b ("mm/memblock: Add reserved memory release function")
Link: https://patch.msgid.link/20260323074836.3653702-2-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
reserve_bootmem_region() is only called from
memmap_init_reserved_pages() and it was in mm/mm_init.c because of its
dependecies on static init_deferred_page().
Since init_deferred_page() is not static anymore, move
reserve_bootmem_region(), rename it to memmap_init_reserved_range() and
make it static.
Update the comment describing it to better reflect what the function
does and drop bogus comment about reserved pages in free_bootmem_page().
Update memblock test stubs to reflect the core changes.
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Link: https://patch.msgid.link/20260323072042.3651061-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
The lis3lv02d started triggering a WARN in the IRQ code because it
passes IRQF_ONESHOT to request_threaded_irq() even when thread_fn is
NULL, which is an invalid combination.
So set the flag only if thread_fn is non-NULL.
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260326180436.14968-2-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using the "reserve_mem" parameter, users aim at having an
area that (hopefully) persists across boots, so pstore infrastructure
(like ramoops module) can make use of that to save oops/ftrace logs,
for example.
There is no easy way to determine if this kernel parameter is properly
set though; the kernel doesn't show information about this memory in
memblock debugfs, neither in /proc/iomem nor dmesg. This is a relevant
information for tools like kdumpst[0], to determine if it's reliable
to use the reserved area as ramoops persistent storage; checking only
/proc/cmdline is not sufficient as it doesn't tell if the reservation
effectively succeeded or not.
Add here a new file under memblock debugfs showing properly set memory
reservations, with name and size as passed to "reserve_mem". Notice that
if no "reserve_mem=" is passed on command-line or if the reservation
attempts fail, the file is not created.
[0] https://aur.archlinux.org/packages/kdumpst
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260324012839.1991765-2-gpiccoli@igalia.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Use the correct kernel-doc format to avoid kernel-doc warnings:
Warning: include/linux/lis3lv02d.h:125 struct member 'st_min_limits' not
described in 'lis3lv02d_platform_data'
Warning: include/linux/lis3lv02d.h:125 struct member 'st_max_limits' not
described in 'lis3lv02d_platform_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260312051400.682991-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parsing of kernel parameter "reserve_mem=" is subject to
multiple failures, like duplicate naming, malformed expression
or even lack of available memory. Right now, all of these fail
silently. Let's add some messages so the kernel log can provide
useful information in case of failures.
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260324012839.1991765-1-gpiccoli@igalia.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
The _fill_states() method returns a list of strings, but the type
annotation incorrectly specified str. Update the annotation to
list[str] to match the actual return value.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-20-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Pyright static analysis reports a "possibly unbound variable" warning
for the loop variable `i` in the `abbreviate_atoms` function. The
variable is accessed after the inner loop terminates to slice the atom
string. While the loop logic currently ensures execution, the analyzer
flags the reliance on the loop variable persisting outside its scope.
Refactor the prefix length calculation into a nested `find_share_length`
helper function. This encapsulates the search logic and uses explicit
return statements, ensuring the length value is strictly defined. This
satisfies the type checker and improves code readability without
altering the runtime behavior.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-19-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The __get_state_variables() method parses DOT files to identify the
automaton's initial state. If the input file lacks a node with the
required initialization prefix, the initial_state variable is referenced
before assignment, causing an UnboundLocalError or a generic error
during the state removal step.
Initialize the variable explicitly and validate that a start node was
found after parsing. Raise a descriptive AutomataError if the definition
is missing to improve debugging and ensure the automaton is valid.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-18-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add a node_marker class constant to the Automata class to replace the
hardcoded "{node" string literal used throughout the DOT file parsing
logic. This follows the existing pattern established by the init_marker
and invalid_state_str class constants in the same class.
The "{node" string is used as a marker to identify node declaration
lines in DOT files during state variable extraction and cursor
positioning. Extracting it to a named constant improves code
maintainability and makes the marker's purpose explicit.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-17-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The Variable.expand() method in ltl2ba.py performs contradiction
detection by checking if a negated variable already exists in the
graph node's old set. However, the isinstance check was incorrectly
testing the ASTNode wrapper instead of the wrapped operator, causing
the check to always return False.
The old set contains ASTNode instances which wrap LTL operators via
their .op attribute. The fix changes isinstance(f, NotOp) to
isinstance(f.op, NotOp) to correctly examine the wrapped operator
type. This follows the established pattern used elsewhere in the
file, such as the iteration at lines 572-574 which accesses
o.op.is_temporal() on items from node.old.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260223162407.147003-16-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Add required=True to the monitor subcommand arguments for class, spec,
and monitor_type in rvgen. These arguments are essential for monitor
generation and attempting to run without them would cause AttributeError
exceptions later in the code when the script tries to access them.
Making these arguments explicitly required provides clearer error
messages to users at parse time rather than cryptic exceptions during
execution. This improves the user experience by catching missing
arguments early with helpful usage information.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260223162407.147003-15-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The __get_main_name() method in the generator module is never called
from anywhere in the codebase. Remove this dead code to improve
maintainability.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-14-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The sys module was imported in the dot2c frontend script but never
used. This import was likely left over from earlier development or
copied from a template that required sys for exit handling.
Remove the unused import to clean up the code and satisfy linters
that flag unused imports as errors.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-13-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Refactor the DOT file parsing logic in automata.py to use Python's
iterator-based patterns instead of manual cursor indexing. The previous
implementation relied on while loops with explicit cursor management,
which made the code prone to off-by-one errors and would crash on
malformed input files containing empty lines.
The new implementation uses enumerate and itertools.islice to iterate
over lines, eliminating manual cursor tracking. Functions that search
for specific markers now use for loops with early returns and explicit
AutomataError exceptions for missing markers, rather than assuming the
markers exist. Additional bounds checking ensures that split line
arrays have sufficient elements before accessing specific indices,
preventing IndexError exceptions on malformed DOT files.
The matrix creation and event variable extraction methods now use
functional patterns with map combined with itertools.islice,
making the intent clearer while maintaining the same behavior. Minor
improvements include using extend instead of append in a loop, adding
empty file validation, and replacing enumerate with range where the
enumerated value was unused.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-12-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Replace hardcoded string literal and magic number with a class
constant for the initial state marker in DOT file parsing. The
previous implementation used the magic string "__init_" directly
in the code along with a hardcoded length of 7 for substring
extraction, which made the code less maintainable and harder to
understand.
This change introduces a class constant init_marker to serve as
a single source of truth for the initial state prefix. The code
now uses startswith() for clearer intent and calculates the
substring position dynamically using len(), eliminating the magic
number. If the marker value needs to change in the future, only
the constant definition requires updating rather than multiple
locations in the code.
The refactoring improves code readability and maintainability
while preserving the exact same runtime behavior.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260223162407.147003-11-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Fix incorrect boolean logic in automata DOT file format validation
that allowed malformed files to pass undetected. The previous
implementation used a logical AND operator where OR was required,
causing the validation to only reject files when both the first
token was not "digraph" AND the second token was not
"state_automaton". This meant a file starting with "digraph" but
having an incorrect second token would incorrectly pass validation.
The corrected logic properly rejects DOT files where either the
first token is not "digraph" or the second token is not
"state_automaton", ensuring that only properly formatted automaton
definition files are accepted for processing. Without this fix,
invalid DOT files could cause downstream parsing failures or
generate incorrect C code for runtime verification monitors.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-10-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Fix whitespace violations throughout the rvgen codebase to comply
with PEP 8 style guidelines. The changes address missing whitespace
after commas, around operators, and in collection literals that
were flagged by pycodestyle.
The fixes include adding whitespace after commas in string replace
chains and function arguments, adding whitespace around arithmetic
operators, removing extra whitespace in list comprehensions, and
fixing dictionary literal spacing. These changes improve code
readability and consistency with Python coding standards.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260223162407.147003-9-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Fix two typos in the Automata class documentation that have been
present since the initial implementation. Fix the class
docstring: "part it" instead of "parses it". Additionally, a
comment describing transition labels contained the misspelling
"lables" instead of "labels".
Fix a typo in the comment describing the insertion of the initial
state into the states list: "bein og" should be "beginning of".
Fix typo in the module docstring: "Abtract" should be "Abstract".
Fix several occurrences of "automata" where it should be the singular
form "automaton".
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260223162407.147003-8-wander@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The i2sbus PCM code uses pi->active to constrain the sibling stream to
an already prepared duplex format and rate in i2sbus_pcm_open().
That state is set from i2sbus_pcm_prepare(), but the current code only
clears it on close. As a result, the sibling stream can inherit stale
constraints after the prepared state has been torn down.
Clear pi->active when hw_params() or hw_free() tears down the prepared
state, and set it again only after prepare succeeds.
Replace the stale FIXME in the duplex constraint comment with a description
of the current driver behavior: i2sbus still programs a single shared
transport configuration for both directions, so mixed formats are not
supported in duplex mode.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604010125.AvkWBYKI-lkp@intel.com/
Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260331-aoa-i2sbus-clear-stale-active-v2-1-3764ae2889a1@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
iommupt always supports the semantics required for DMA-FQ, when drivers
are converted to use it they automatically get support.
Detect iommpt directly instead of using IOMMU_CAP_DEFERRED_FLUSH and
remove IOMMU_CAP_DEFERRED_FLUSH from converted drivers.
This will also enable DMA-FQ on RISC-V.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Same issue as the other 1st Gen Scarletts: QUIRK_FLAG_SKIP_IFACE_SETUP
causes distorted audio on this revision of the Scarlett 2i2 1st Gen
(1235:8016).
Fixes: 38c322068a26 ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Reported-by: lukas-reineke [https://github.com/geoffreybennett/linux-fcp/issues/54]
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/acytr8aEUba4VXmZ@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Johan Hovold <johan@kernel.org> says:
Use the common USB helper for looking up bulk and interrupt endpoints
instead of open coding.
Link: https://patch.msgid.link/20260330101817.1664787-1-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> says:
The MCP251xFD provides a dedicated transceiver standby control function via
the INT0/GPIO0/XSTBY pin, controlled by the XSTBYEN bit in IOCON. When
enabled, the hardware automatically drives the pin low while the controller
is active and high when it enters Sleep mode, allowing automatic standby
control of an external CAN transceiver without software intervention.
This series adds driver support for the XSTBYEN-based transceiver standby
control feature.
Tested on QCS6490 RB3 Gen2 with a PCAN-USB FD adapter: the transceiver is
active in normal mode, CAN communication works correctly, and the pin is
automatically managed across sleep and wake transitions.
Link: https://patch.msgid.link/20260321135031.3107408-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers and max packet sizes) instead of open
coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330101817.1664787-3-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the FIELD_MODIFY() helper instead of open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/ee2e6aaacd5e061c972716ecaf8a929be7ef5f2e.1772705647.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The MCP251xFD has a dedicated transceiver standby control function on
the INT0/GPIO0/XSTBY pin, controlled by the XSTBYEN bit in IOCON.
When enabled, the hardware automatically manages the transceiver
standby state: the pin is driven low when the controller is active
and high when it enters Sleep mode.
Enable this feature when the 'microchip,xstbyen' device tree property
is present.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260321135031.3107408-3-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the common USB helper for looking up bulk and interrupt endpoints
instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330101817.1664787-2-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The ctucanfd driver has its own copy of the PCI_DEVICE_DATA macro. I
assume this was done to support older kernel versions where it didn't
exist, but that is irrelevant once the driver is in the mainline
kernel. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260130114134.47421-1-enelsonmoore@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the boolean property 'microchip,xstbyen' to enable the dedicated
transceiver standby control function on the INT0/GPIO0/XSTBY pin of
the MCP251xFD family.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260321135031.3107408-2-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251104165731.315074-1-marco.crivellari@suse.com
|
|
bitmap_empty() in pnv_ioda_pick_m64_pe() is O(N) and useless because
the following find_next_bit() does the same work.
Drop it, and while there replace a while() loop with the dedicated
for_each_set_bit().
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250814190936.381346-3-yury.norov@gmail.com
|
|
Use the dedicated bitmap_alloc() in pnv_ioda_pick_m64_pe() and drop
some housekeeping code.
Because pe_alloc is local, annotate it with __free() and get rid of
the explicit kfree() calls.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250814190936.381346-2-yury.norov@gmail.com
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Convert csum_and_copy_to_user() and csum_and_copy_from_user() to
scoped user access to benefit from masked user access.
csum_and_copy_to_user() and csum_and_copy_from_user() are only
called respectively by csum_and_copy_to_iter() and
csum_and_copy_from_iter_full() and they are only called twice.
Those functions used to be large but they were first reduced by
commit c693cc4676a0 ("saner calling conventions for
csum_and_copy_..._user()") then commit 70d65cd555c5 ("ppc: propagate
the calling conventions change down to csum_partial_copy_generic()").
With the additional size reduction provided by conversion to scoped
user access they are not worth being kept out of line.
$ ./scripts/bloat-o-meter vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 136/-176 (-40)
Function old new delta
csum_and_copy_to_iter 2416 2488 +72
csum_and_copy_from_iter_full 2272 2336 +64
csum_and_copy_to_user 88 - -88
csum_and_copy_from_user 88 - -88
Total: Before=11514471, After=11514431, chg -0.00%
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/f44e1b2760dbed35b237040001a91bc8304b726b.1773137098.git.chleroy@kernel.org
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Convert single step emulation functions to scoped user access to
benefit from masked user access.
Scoped user access also make the code simpler.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8f2d85bddacff18046096dc255fd94f6a0f8b230.1773137010.git.chleroy@kernel.org
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Convert emulate_spe() to scoped user access to benefit from masked
user access.
Scoped user access also make the code simpler.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4ff83cb240da4e2d0c34e2bce4b8b6ef19a33777.1773136880.git.chleroy@kernel.org
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Convert gpr32_set_common_user() to scoped user access to benefit
from masked user access.
Scoped user access also make the code simpler.
Also changes label from Efault to efault to avoid checkpatch
complaining about CamelCase.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2409643daab08b4bc07004c2b88f42085d1ef45a.1773136838.git.chleroy@kernel.org
|
|
Commit 861574d51bbd ("powerpc/uaccess: Implement masked user access")
provides optimised user access by avoiding the cost of access_ok().
Use masked user access in arch_futex_atomic_op_inuser()
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e29f6a5c14e5938df68d94bfac6b2f762fb922aa.1773136636.git.chleroy@kernel.org
|
|
Commit e65e1fc2d24b ("[PATCH] syscall class hookup for all normal
targets") added generic support for AUDIT but that didn't include
support for bi-arch like powerpc.
Commit 4b58841149dc ("audit: Add generic compat syscall support")
added generic support for bi-arch.
Convert powerpc to that bi-arch generic audit support.
With this change generated text is similar.
Thomas has confirmed that the previously failing filter_exclude/test
is now successful both without and with this patch, see [1]
[1] https://lore.kernel.org/all/20260306115350-ef265661-6d6b-4043-9bd0-8e6b437d0d67@linutronix.de/
Link: https://github.com/linuxppc/issues/issues/412
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/261b1be5b8dc526b83d73e8281e682a73536ea28.1773155031.git.chleroy@kernel.org
|
|
snooze_loop is done often in any system which has fair bit of
idle time. So it qualifies for even micro-optimizations.
When breaking the snooze due to timeout, TIF_POLLING_NRFLAG is cleared
twice. Clearing the bit invokes atomics. Avoid double clear and thereby
avoid one atomic write.
dev->poll_time_limit indicates whether the loop was broken due to
timeout. Use that instead of defining a new variable.
Fixes: 7ded429152e8 ("cpuidle: powerpc: no memory barrier after break from idle")
Cc: stable@vger.kernel.org
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260311061709.1230440-1-sshegde@linux.ibm.com
|
|
Fix enum and function return value kernel-doc warnings:
Warning: spu.c:36 Excess enum value '%spe_type_logical' description in 'spe_type'
Warning: spu.c:78 Excess enum value '%spe_ex_state_unexecutable' description in 'spe_ex_state'
Warning: spu.c:78 Excess enum value '%spe_ex_state_executable' description in 'spe_ex_state'
Warning: spu.c:78 Excess enum value '%spe_ex_state_executed' description in 'spe_ex_state'
Warning: spu.c:190 No description found for return value of 'setup_areas'
Fixes: de91a5342995 ("[POWERPC] ps3: add spu support")
Fixes: b47027795a22 ("powerpc/ps3: Fix ioremap of spu shadow regs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260225055328.249204-1-rdunlap@infradead.org
|
|
Remove empty comment line at the beginning of a kernel-doc function
block. Add a "Return:" section for this function.
These changes prevent 2 kernel-doc warnings:
Warning: ../arch/powerpc/kernel/kgdb.c:103 Cannot find identifier on line:
*
Warning: kgdb.c:113 No description found for return value of 'kgdb_skipexception'
Fixes: 949616cf2d30 ("powerpc/kgdb: Bail out of KGDB when we've been triggered")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260225055314.247966-1-rdunlap@infradead.org
|
|
Fix some kernel-doc warnings in ps3.h:
- add @dev to struct ps3_dma_region
- don't mark a function as "struct"
- add Returns: description for one function
- add a short description for ps3_system_bus_set_drvdata()
- correct an enum @name
- move intervening "struct ps3_system_bus_device;" from between
kernel-doc for ps3_dma_region_init() and the function declaration
to eliminate these warnings:
Warning: arch/powerpc/include/asm/ps3.h:96 struct member 'dev' not
described in 'ps3_dma_region'
Warning: arch/powerpc/include/asm/ps3.h:118 struct ps3_system_bus_device;
error: Cannot parse struct or union!
Warning: arch/powerpc/include/asm/ps3.h:166 int
ps3_mmio_region_init(struct ps3_system_bus_device *dev, struct
ps3_mmio_region *r, unsigned long bus_addr, unsigned long len, enum
ps3_mmio_page_size page_size); error: Cannot parse struct or union!
Warning: arch/powerpc/include/asm/ps3.h:167 No description found for
return value of 'ps3_mmio_region_init'
Warning: arch/powerpc/include/asm/ps3.h:407 missing initial short
description on line:
* ps3_system_bus_set_drvdata -
Warning: arch/powerpc/include/asm/ps3.h:473 Enum value
'PS3_LPM_TB_TYPE_INTERNAL' not described in enum 'ps3_lpm_tb_type'
Warning: arch/powerpc/include/asm/ps3.h:473 Excess enum value
'@PS3_LPM_RIGHTS_USE_TB' description in 'ps3_lpm_tb_type'
This leaves struct members in several structs and function parameters in
one function still undescribed.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251129183636.1893634-1-rdunlap@infradead.org
|
|
Adjust the name of the drive slot LED node to comply with the schema in
Documentation/devicetree/bindings/leds/leds-gpio.yaml.
arch/powerpc/boot/dts/wii.dtb: gpio-leds: 'drive-slot' does not match
any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260311-wii-schema-v1-3-1563ac4aefa8@posteo.net
|
|
Adjust the names of GPIO key nodes to comply with the schema in
Documentation/devicetree/bindings/input/gpio-keys.yaml.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260311-wii-schema-v1-2-1563ac4aefa8@posteo.net
|
|
This fixes the following dtschema warning:
arch/powerpc/boot/dts/wii.dtb: /: memory: False schema does not allow
{'device_type': ['memory'], 'reg': [[0, 25165824], [268435456, 67108864]]}
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260311-wii-schema-v1-1-1563ac4aefa8@posteo.net
|
