summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-04-01drm/i915/mchbar: Define the end of the MCHBAR mirrorVille Syrjälä
Add defines for the end of the MCHBAR mirror. I'm planning to use this for some range sanity checks. BSpec: 51771 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20260331154259.24600-4-ville.syrjala@linux.intel.com
2026-04-01powercap: intel_rapl: Move MSR primitives to MSR driverKuppuswamy Sathyanarayanan
MSR-specific RAPL primitives differ from those used by TPMI and MMIO interfaces. Keeping them in the common driver requires interface-specific handling logic and makes the common layer unnecessarily complex. Move the MSR primitive definitions and associated bitmasks into the MSR interface driver. This change includes: 1. Move MSR-specific bitmask definitions to RAPL MSR driver. 2. Add MSR-local struct rapl_primitive_info instance and assign it to priv->rpi during MSR probe. 3. Remove the primitive assignment logic from rapl_config() in the common driver. No functional changes are intended. Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20260331211950.3329932-7-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01thermal: intel: int340x: processor: Move MMIO primitives to MMIO driverKuppuswamy Sathyanarayanan
MMIO-specific primitives differ from those used by the TPMI interface. The MSR and MMIO interfaces shared the same primitives in the common driver, but MMIO does not require many MSR-specific entries (like PSYS). Keeping these in the common driver does not add any value and requires interface-specific handling logic that makes the common layer unnecessarily complex. Move the MMIO primitive definitions and associated bitmasks into the MMIO interface driver. This change includes: 1. Add MMIO-local struct rapl_primitive_info instance without MSR-specific entries and assign it to priv->rpi during MMIO initialization. 2. Remove the RAPL MMIO case from rapl_config() in the common driver. No functional changes are intended. Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20260331211950.3329932-6-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01powercap: intel_rapl: Move TPMI primitives to TPMI driverKuppuswamy Sathyanarayanan
TPMI-specific RAPL primitives differ from those used by MSR and MMIO interfaces. Keeping them in the common RAPL driver requires interface-specific handling logic and makes the common layer unnecessarily complex. Move the TPMI primitive definitions and associated bitmasks into the TPMI interface driver. This change includes: 1. Move TPMI-specific bitmask definitions from intel_rapl_common.c to intel_rapl_tpmi.c. 2. Add TPMI-local struct rapl_primitive_info instance and assign it to priv->rpi during TPMI probe. 3. Remove the RAPL TPMI related definitions from the common driver. No functional changes are intended. Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20260331211950.3329932-5-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01powercap: intel_rapl: Move primitive info to header for interface driversKuppuswamy Sathyanarayanan
RAPL primitive information varies across different RAPL interfaces (MSR, TPMI, MMIO). Keeping them in the common code adds no benefit, but requires interface-specific handling logic and makes the common layer unnecessarily complex. Move the primitive info infrastructure to the shared header to allow interface drivers to configure RAPL primitives. Specific changes: 1. Move struct rapl_primitive_info, enum unit_type, and PRIMITIVE_INFO_INIT macro to intel_rapl.h. 2. Change the @rpi field in struct rapl_if_priv from void * to struct rapl_primitive_info * to improve type safety and eliminate unnecessary casts. No functional changes. This is a preparatory refactoring to allow interface drivers to supply their own RAPL primitive settings. Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20260331211950.3329932-4-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01powercap: intel_rapl: Remove unused macro definitionsKuppuswamy Sathyanarayanan
Remove the following unused macro definitions from the RAPL common driver: * DOMAIN_STATE_INACTIVE and DOMAIN_STATE_POWER_LIMIT_SET * IOSF_CPU_POWER_BUDGET_CTL_BYT and IOSF_CPU_POWER_BUDGET_CTL_TNG * MAX_PRIM_NAME No functional changes. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20260331211950.3329932-3-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01powercap: intel_rapl: Move MSR default settings into MSR interface driverKuppuswamy Sathyanarayanan
MSR-specific RAPL defaults differ from those used by the TPMI interface. The MMIO and MSR interfaces shared the same rapl_defaults pointer in the common driver, but MMIO does not require the CPU-specific variations needed by MSR. Keeping these in the common driver adds unnecessary complexity and MSR-specific initialization. Move MSR defaults and CPU matching into the MSR interface driver. Moves ----- * Move rapl_check_unit_atom(), set_floor_freq_atom(), and rapl_compute_time_window_atom() into intel_rapl_msr.c. * Move MSR unit-field GENMASK definitions and local constants. * Move all MSR-related rapl_defaults tables and the CPU-ID matching logic (rapl_ids[]) into the MSR driver. * Move iosf_mbi dependencies (floor-frequency control and related MBI register definitions) as they are MSR-platform specific. Modifications ------------- * Replace the common driver's platform-device manual alloc/add sequence with platform_device_register_data() in the MSR driver to pass matching rapl_defaults as platform_data. * Update MSR driver probe to assign pdev->dev.platform_data to priv->defaults. * Update Atom helper functions to use rp->lead_cpu directly for MSR reads/writes instead of the generic get_rid(). * Update Atom floor frequency logic to access defaults via the package private data pointer. * Convert MSR device creation from fs_initcall() to module_init(). This preserves existing enumeration behavior as the driver was already using module_init(). * Since rapl_ids need to exist after boot, remove __initconst specifier. No functional changes are expected. Co-developed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20260331211950.3329932-2-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01drm/i915/mchbar: Provide intel_mchbar_read*() abstractionVille Syrjälä
MCHBAR registers are a bit special in that: - we access them through the mirror - the mirror is read only on HSW+ - the mirror requires the actual MCHBAR to be enabled in device 0:0.0 - the mirror is gone on MTL+ So I'd prefer to treat MCHBAR registers as a bit special in the code as well, and do all accesses to them via dedicated functions. Prodive such functions in the form of intel_mchbar_read*(). v2: Put the function arguments on one line No intel_uncore_read64() on xe, use intel_uncore_read64_2x32() Name the new function intel_mchbar_read64_2x32() as well Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20260331154259.24600-3-ville.syrjala@linux.intel.com
2026-04-01drm/i915/qgv: Use intel_de_read() for MTL_MEM_SS_INFO* readsVille Syrjälä
The MTL_MEM_SS_INFO* are just regular display registers. Use intel_de_read() to access them. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20260331154259.24600-2-ville.syrjala@linux.intel.com
2026-04-01cpuidle: clean up dead dependencies on CPU_IDLE in KconfigJulian Braha
The Kconfig in the parent directory already has the first 'if CPU_IDLE' gating the inclusion of this Kconfig, meaning that the 'depends on CPUIDLE' statements in these config options are effectively dead code. Leave the 'if CPU_IDLE...endif' condition, and remove the individual 'depends on' statements in Kconfig.mips and Kconfig.powerpc This dead code was found by kconfirm, a static analysis tool for Kconfig. Signed-off-by: Julian Braha <julianbraha@gmail.com> [ rjw: Subject and changelog edits ] Link: https://patch.msgid.link/20260331074920.41269-1-julianbraha@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01cpufreq: clean up dead code in KconfigJulian Braha
There is already an 'if CPU_FREQ' condition wrapping these config options, making the 'depends on' statement for each a duplicate dependency (dead code). Leave the outer 'if CPU_FREQ...endif' and remove the individual 'depends on' statement from each option. This dead code was found by kconfirm, a static analysis tool for Kconfig. Signed-off-by: Julian Braha <julianbraha@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject and changelog edits ] Link: https://patch.msgid.link/20260331074242.39986-1-julianbraha@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01cpufreq: Allocate QoS freq_req objects with policyViresh Kumar
A recent change exposed a bug in the error path: if freq_qos_add_request(boost_freq_req) fails, min_freq_req may remain a valid pointer even though it was never successfully added. During policy teardown, this leads to an unconditional call to freq_qos_remove_request(), triggering a WARN. The current design allocates all three freq_req objects together, making the lifetime rules unclear and error handling fragile. Simplify this by allocating the QoS freq_req objects at policy allocation time. The policy itself is dynamically allocated, and two of the three requests are always needed anyway. This ensures consistent lifetime management and eliminates the inconsistent state in failure paths. Reported-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Fixes: 6e39ba4e5a82 ("cpufreq: Add boost_freq_req QoS request") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com> Link: https://patch.msgid.link/a293f29d841b86c51f34699c6e717e01858d8ada.1774933424.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2026-04-01ASoC: tegra: Add error logging for probe and callback failuresMark Brown
Sheetal <sheetal@nvidia.com> says: Resend pending v3 patches with fixes and add remaining dev_err_probe() conversions. Patch 1 replaces v3 patch 03/14 (ADMAIF). Patch 2 replaces v3 patch 09/14 (OPE/PEQ/MBDRC). Patch 3 is new - adds regmap init conversions across 10 drivers. Patch 4 is new - adds clock error conversions in tegra_asoc_machine.
2026-04-01ASoC: tegra: Use dev_err_probe() in tegra_asoc_machine probeSheetal
Use dev_err_probe() for clock errors in the tegra_asoc_machine probe path. Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20260401112500.4076861-5-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01ASoC: tegra: Use dev_err_probe() for regmap init failuresSheetal
Use dev_err_probe() for regmap init failures in Tegra audio driver probe paths. Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20260401112500.4076861-4-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01ASoC: tegra: Use dev_err_probe() in OPE, PEQ and MBDRC driversSheetal
Log errors in the Tegra210 OPE, PEQ and MBDRC probe paths using dev_err_probe(). Drop redundant dev_err() at tegra210_peq_regmap_init() and tegra210_mbdrc_regmap_init() call sites in ope_probe() since these functions already log errors internally. Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20260401112500.4076861-3-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01ASoC: tegra: Add error logging in tegra210_admaif driverSheetal
Log errors in the Tegra210 ADMAIF probe and runtime callback paths. Drop redundant dev_err() at tegra_isomgr_adma_register() call site since it already logs errors internally. Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20260401112500.4076861-2-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01Merge tag 'counter-fixes-for-7.0' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: Counter fixes for 7.0 Two fixes for rz-mut3-cnt: synchronize runtime PM usage count to toggle state of the counter, and set counter->parent during probe to ensure the current dev pointer is accessed during driver operation. * tag 'counter-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member counter: rz-mtu3-cnt: prevent counter from being toggled multiple times
2026-04-01KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaimWill Deacon
Now that the teardown of a VM cannot be finalised as long as a reference is held on the VM, rework __pkvm_reclaim_dying_guest_page() to hold a reference to the dying VM rather than take the global 'vm_table_lock' during the reclaim operation. Signed-off-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20260331155056.28220-4-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-04-01KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VMWill Deacon
Now that completion of the teardown path requires a refcount of zero for the target VM, we can allow get_pkvm_hyp_vm() to take a reference on a dying VM, which is necessary to unshare pages with a non-protected VM during the teardown process itself. Note that vCPUs belonging to a dying VM cannot be loaded and pages can only be reclaimed from a protected VM (via __pkvm_reclaim_dying_guest_page()) if the target VM is in the dying state. Signed-off-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20260331155056.28220-3-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-04-01KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm'Will Deacon
Destroying a 'hyp_vm' with an elevated referenced count in __pkvm_finalize_teardown_vm() is only going to lead to tears. In preparation for allowing limited references to be acquired on dying VMs during the teardown process, factor out the handle-to-vm logic for the teardown path and reuse it for both the 'start' and 'finalise' stages of the teardown process. Signed-off-by: Will Deacon <will@kernel.org> Link: https://patch.msgid.link/20260331155056.28220-2-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-04-01rv: Allow epoll in rtapp-sleep monitorNam Cao
Since commit 0c43094f8cc9 ("eventpoll: Replace rwlock with spinlock"), epoll_wait is real-time-safe syscall for sleeping. Add epoll_wait to the list of rt-safe sleeping APIs. Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20260401130828.3115428-1-namcao@linutronix.de Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
2026-04-01ASoC: mxs-sgtl5000: disable MCLK on error paths of mxs_sgtl5000_probe()Haoxiang Li
Call mxs_saif_put_mclk() to disable MCLK on error paths of mxs_sgtl5000_probe(). Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Link: https://patch.msgid.link/20260401053051.586290-1-lihaoxiang@isrc.iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01ALSA: es1688: add ISA suspend and resume callbacksCássio Gabriel
The ISA ES1688 driver still carries a disabled suspend/resume block in its isa_driver definition, while the same file already provides minimal power-management handling for the PnP ES968 path. Add ISA-specific PM callbacks and factor the existing ES1688 suspend and resume sequence into common card-level helpers shared by both probe paths. Suspend moves the card to D3hot. Resume reinitializes the chip with snd_es1688_reset() and restores the card to D0, propagating reset failures to the caller. This wires up power-management callbacks for the ISA path and keeps the PM handling consistent between the ISA and PnP probe paths. Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com> Link: https://patch.msgid.link/20260401-alsa-es1688-pm-v1-1-510767628fe6@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-04-01ALSA: ctxfi: Precompute SRC allocation loop boundHarin Lee
Replace the capability checks in the SRC and SRCIMP allocation loops with a precomputed loop bound. Cards with a dedicated mic input (SB1270, OK0010) allocate all NUM_ATC_SRCS entries, otherwise stop at 4. Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260401090159.2404387-4-me@harin.net
2026-04-01ALSA: ctxfi: Use correct DAIO type for da_descHarin Lee
Skip the unused DAIO type per model (SPDIFIO on CTSB073X, SPDIFI_BAY on all others) and use the correct DAIO type directly as da_desc type. This removes the mismatch and misleading between the actual DAIO resource and the da_desc type like SPDIFI_BAY (formerly SPDIFI1). Update related functions accordingly, and drop the unreachable SPDIFI_BAY case from the hw20k2 daio_device_index(). Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260401090159.2404387-3-me@harin.net
2026-04-01ALSA: ctxfi: Rename SPDIFI1 to SPDIFI_BAYHarin Lee
Rename the SPDIFI1 enum value to SPDIFI_BAY to better reflect its purpose as the S/PDIF input on the internal drive bay, as opposed to the S/PDIF input via Flexijack or optical (SPDIFIO; not SPDIFI-zero). Signed-off-by: Harin Lee <me@harin.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260401090159.2404387-2-me@harin.net
2026-04-01Merge branch 'for-linus' into for-nextTakashi Iwai
Pull 7.0 devel branch for further cleanups of ctxfi driver & co. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-04-01ASoC: amd: ps: Fix missing leading zeros in subsystem_device SSID logSimon Trimmer
Ensure that subsystem_device is printed with leading zeros when combined with subsystem_vendor to form the SSID. Without this, devices with upper bits unset may appear to have an incorrect SSID in the debug output. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Link: https://patch.msgid.link/20260331131916.145546-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01ASoC: ak5558: remove unused snd_soc_componentKuninori Morimoto
ak5558_priv::component has never been used. Remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/875x6bttv8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01ASoC: soc.h: remove snd_soc_of_parse_audio_prefix()Kuninori Morimoto
No one is using snd_soc_of_parse_audio_prefix(). Remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/877bqrttvp.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-04-01Merge tag 'hisi-dts-fixes-for-7.0' of ↵Krzysztof Kozlowski
https://github.com/hisilicon/linux-hisi into arm/fixes HiSilicon dts fixes for v7.0 - Correct the PCIe reset GPIO polarity for hi3798cv200-poplar - Add the missing dma-ranges for hi3798cv200 * tag 'hisi-dts-fixes-for-7.0' of https://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'qcom-drivers-fixes-for-7.0' of ↵Krzysztof Kozlowski
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v7.0 Fix the length of the PD restart reason string in pd-mapper to avoid QMI decoding errors, resulting in the notification being dropped. Fix the newly introduce handling of TBT/USB4 notifications in pmic_glink altmode driver, as it broke the handling of non-TBT/USB4 DisplayPort unplug events. * tag 'qcom-drivers-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'riscv-soc-fixes-for-v7.0-rc6' of ↵Krzysztof Kozlowski
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v7.0-rc6 Microchip: More resource leak fixes for unlikely scenarios, and a change to the auto-update "firmware" driver to prevent it probing on systems with engineering silicon where it cannot be used. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v7.0-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux: firmware: microchip: fail auto-update probe if no flash found soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'nuvoton-arm64-7.1-devicetree-0' of ↵Krzysztof Kozlowski
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt nuvoton: first batch of arm64 devicetree changes for v7.1 Just the one change this time, dropping syscon properties where they weren't defined. * tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux: arm64: dts: nuvoton: drop unused syscon property from watchdog node Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'aspeed-7.1-devicetree-0' of ↵Krzysztof Kozlowski
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt aspeed: first batch of devicetree changes for v7.1 New platforms: - Asus Kommando IPMI card - Asrock Paul IPMI card Updated platforms: - Anacapa (Meta): NFC and EEPROMs - MSX4 (Nvidia): 128M layout for the alternate boot flash * tag 'aspeed-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux: ARM: dts: aspeed: anacapa: Add retimer EEPROMs ARM: dts: aspeed: anacapa: add NFC device ARM: dts: aspeed: Add Asrock Paul IPMI card dt-bindings: arm: aspeed: Add Asrock Paul IPMI card ARM: dts: aspeed: Add 128M alt flash layout to NVIDIA MSX4 ARM: dts: aspeed: Add Asus Kommando IPMI card dt-bindings: arm: aspeed: Add Asus Kommando IPMI card Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01pmdomain: Merge branch fixes into nextUlf Hansson
Merge the pmdomain fixes for v7.0-rc[n] into the next branch, to allow them to get tested together with the pmdomain changes that are targeted for the next release. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: Merge branch pmdomain into nextUlf Hansson
Merge the immutable branch pmdomain into next to get the changes queued and tested for the next release. The pmdomain branch hosts minor core changes for pmdomain. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01Merge tag 'aspeed-7.0-fixes-0' of ↵Krzysztof Kozlowski
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes aspeed: first batch of fixes for v7.0 * tag 'aspeed-7.0-fixes-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux: soc: aspeed: socinfo: Mask table entries for accurate SoC ID matching Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01Merge tag 'reset-fixes-for-v7.0-2' of ↵Krzysztof Kozlowski
https://git.pengutronix.de/git/pza/linux into arm/fixes Reset controller fixes for v7.0, part 2 * Decouple spacemit K3 reset lines that were incorrectly coupled together as one, but are in fact separate resets in hardware. * Fix a double free in the reset_add_gpio_aux_device() error path. This has already been fixed on reset/next by commit a9b95ce36de4 ("reset: gpio: add a devlink between reset-gpio and its consumer"). * Fix the MODULE_AUTHOR string in the rzg2l-usbphy-ctrl driver. * tag 'reset-fixes-for-v7.0-2' of https://git.pengutronix.de/git/pza/linux: reset: spacemit: k3: Decouple composite reset lines reset: gpio: fix double free in reset_add_gpio_aux_device() error path reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01PM: domains: De-constify fields in struct dev_pm_domain_attach_dataDmitry Baryshkov
It doesn't really make sense to keep u32 fields to be marked as const. Having the const fields prevents their modification in the driver. Instead the whole struct can be defined as const, if it is constant. Fixes: 161e16a5e50a ("PM: domains: Add helper functions to attach/detach multiple PM domains") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: qcom: cpr: simplify main allocationRosen Penev
Remove kcalloc by using a flexible array member to combine allocations. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: bcm: bcm2835-power: Replace open-coded polling with ↵Maíra Canal
readl_poll_timeout_atomic() Replace hand-rolled ktime_get_ns()/cpu_relax() polling loops with readl_poll_timeout_atomic() for the power-on (POWOK), and memory repair (MRDONE) waits. No functional change intended. Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: sunxi: Add support for A733 to Allwinner PCK600 driverYuanshen Cao
The Allwinner A733 PCK600, similar to A523 PCK600, is likely a customized version of ARM PCK-600 power controller. It shares the same BSP driver with A523. According to the BSP provided by Radxa, unlike A523, it doesn't require reset, as well as a different pair of delay values. Make reset optional in the sunxi pck600 driver and add support for A733. Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@kernel.org> # matched against BSP driver Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: qcom: rpmhpd: Add Eliza RPMh Power DomainsAbel Vesa
Add RPMh Power Domains support for the Eliza platform. The list of power domains is taken from downstream. Even though the cmd-db does list MMCX and MXC, they are not used, so they should not be describe. Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: arm: Add print after a successful probe for SCMI power domainsUlf Hansson
It can be discussed how useful a print is after a successful probe. In the SCMI power domain case it's seems valuable, as it let us inform about the number of initialized power domains too, which is fetched from firmware. Therefore, let's add a print about this, which also aligns with the behaviour of the SCMI perf domain driver. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
2026-04-01pmdomain: rockchip: quiet regulator error on -EPROBE_DEFERChris Morgan
Change the dev_err() to dev_err_probe() under rockchip_pd_power_on() to prevent errors early in the boot process when the requested regulator is not yet available. This converts errors like the following to debug messages: rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517 Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Tested-by: Diederik de Haas <diederik@cknow-tech.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: mediatek: Add power domain driver for MT8189 SoCIrving-CH Lin
Introduce a new power domain (pmd) driver for the MediaTek mt8189 SoC. This driver ports and refines the power domain framework, dividing hardware blocks (CPU, GPU, peripherals, etc.) into independent power domains for precise and energy-efficient power management. Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: mediatek: Add bus protect control flow for MT8189Irving-CH Lin
In MT8189 mminfra power domain, the bus protect policy separates into two parts, one is set before subsys clocks enabled, and another need to enable after subsys clocks enable. Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-04-01pmdomain: core: Extend statistics for domain idle states with s2idle dataUlf Hansson
To allow user space to monitor the selection of the domain idle state during s2idle for a CPU PM domain, let's extend the debugfs support in genpd with this information. Suggested-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-15 20:16:52 +0000