| Age | Commit message (Collapse) | Author |
|---|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 7.0-rc7
Here are some new modem and io_edgeport device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.0-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825WN
USB: serial: io_edgeport: add support for Blackbox IC135A
USB: serial: option: add support for Rolling Wireless RW135R-GL
|
|
The mmap callback reads bo->madv without holding madv_lock, racing with
concurrent DRM_IOCTL_VC4_GEM_MADVISE calls that modify the field under
the same lock. Add the missing locking to prevent the data race.
Fixes: b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-4-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
When vc4_save_hang_state() encounters an early return condition, it
returns without freeing the previously allocated `kernel_state`,
leaking memory.
Add the missing kfree() calls by consolidating the early return paths
into a single place.
Fixes: 214613656b51 ("drm/vc4: Add an interface for capturing the GPU state after a hang.")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-3-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the
missing kfree() for the BO array before freeing the hang state struct.
Fixes: 214613656b51 ("drm/vc4: Add an interface for capturing the GPU state after a hang.")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-2-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
The vc4_v3d_bind() function acquires a runtime PM reference via
pm_runtime_resume_and_get() to access V3D registers during setup.
However, this reference is never released after a successful bind.
This prevents the device from ever runtime suspending, since the
reference count never reaches zero.
Release the runtime PM reference by adding pm_runtime_put_autosuspend()
after autosuspend is configured, allowing the device to runtime suspend
after the delay.
Fixes: 266cff37d7fc ("drm/vc4: v3d: Rework the runtime_pm setup")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-1-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
It(ID 31b2:0111 JU Jiu) reports a MIN value -12800 for volume control, but
will mute when setting it less than -10880.
Thanks to my girlfriend Kagura for reporting this issue.
Cc: Kagura <me@mail.kagurach.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Link: https://patch.msgid.link/20260402-syy-v1-1-068d3bc30ddc@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add missing of_node_put() in the error path.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260402023604.54682-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Ioana Ciornei says:
====================
selftests: drivers: bash support for remote traffic generators
This patch set aims to add the necessary support so that bash written
selftests are also able to easily run with a remote traffic generator
system, either be it in another netns or one accessible through ssh.
This patch set is a result of the discussion from v1:
https://lore.kernel.org/all/20260303084330.340b6459@kernel.org/
Even though the python infrastructure is already established, some
things are easier in bash and it would be a shame to leave behind the
bash tests that we already have.
This support is based on the requirements described in the
tools/testing/selftests/drivers/net/README.rst file.
Mainly, the drivers/net selftests should be able to run on a interface
specified through the NETIF env variable. On top of that, variables such
as REMOTE_TYPE and REMOTE_ARGS define how the remote traffic generator
can be accessed. Patch 3/10 parses these env variables and constructs the
NETIFS array that bash tests are accustomed to. This is with the
intention of enabling already written tests to incur minimal changes.
The second patch also defines the TARGETS array which will hold the
necessary information about the target on which a specific interface
is located.
For example, a net.config which looks like below:
NETIF=eth0
LOCAL_V4=192.168.1.1
REMOTE_V4=192.168.1.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.1.2
will generate the NETIFS and TARGETS arrays with the following data.
NETIFS[p1]="eth0"
NETIFS[p2]="eth2"
TARGETS[eth0]="local:"
TARGETS[eth2]="ssh:root@192.168.1.2"
The above will be true if on the remote target, the interface which has
the 192.168.1.2 address is named eth2.
The values held in the TARGETS array will be used by the new 'run_on'
helper added in patch 2/10 to know how to run a specific command, on the
local system, on another netns or by using ssh. Patch 4/10 updates some
helpers to use run_on so that, for example, lib.sh is able to ensure
stable MAC addresses even with the remote interface located in another
netns.
The next 5 patches, 5/10-9/10 update the ethtool_rmon.sh script so that it
can work with the kselftest infrastructure and the new
NETIF/REMOTE_TYPE etc way of working. Beside updating each ip link or
ethtool command to use the run_on helper, the patches also remove any
testing done on the remote interface.
The last patch adds a new test which checks the standard counters -
eth-ctrl, eth-mac and pause - and uses the new infrastructure put in
place by the first patches.
With this patch set, both tests can be run using a net.config file and
run_kselftest.sh as shown below.
$ make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft-net-drv
$ cd /tmp/ksft-net-drv/
$ cat > ./drivers/net/net.config <<EOF
NETIF=endpmac17
LOCAL_V4=17.0.0.1
REMOTE_V4=17.0.0.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.5.200
EOF
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_rmon.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_rmon.sh
# TAP version 13
# 1..14
# ok 1 ethtool_rmon.rx-pkts64to64
# ok 2 ethtool_rmon.rx-pkts65to127
# ok 3 ethtool_rmon.rx-pkts128to255
# ok 4 ethtool_rmon.rx-pkts256to511
# ok 5 ethtool_rmon.rx-pkts512to1023
# ok 6 ethtool_rmon.rx-pkts1024to1518
# ok 7 ethtool_rmon.rx-pkts1519to10240
# ok 8 ethtool_rmon.tx-pkts64to64
# ok 9 ethtool_rmon.tx-pkts65to127
# ok 10 ethtool_rmon.tx-pkts128to255
# ok 11 ethtool_rmon.tx-pkts256to511
# ok 12 ethtool_rmon.tx-pkts512to1023
# ok 13 ethtool_rmon.tx-pkts1024to1518
# ok 14 ethtool_rmon.tx-pkts1519to10240
# # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net/hw: ethtool_rmon.sh
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_std_stats.sh
# TAP version 13
# 1..26
# ok 1 ethtool_std_stats.eth-ctrl-MACControlFramesTransmitted
# ok 2 ethtool_std_stats.eth-ctrl-MACControlFramesReceived
# ok 3 ethtool_std_stats.eth-mac-FrameCheckSequenceErrors
# ok 4 ethtool_std_stats.eth-mac-AlignmentErrors
# ok 5 ethtool_std_stats.eth-mac-FramesLostDueToIntMACXmitError
# ok 6 ethtool_std_stats.eth-mac-CarrierSenseErrors # SKIP
# ok 7 ethtool_std_stats.eth-mac-FramesLostDueToIntMACRcvError
# ok 8 ethtool_std_stats.eth-mac-InRangeLengthErrors # SKIP
# ok 9 ethtool_std_stats.eth-mac-OutOfRangeLengthField # SKIP
# ok 10 ethtool_std_stats.eth-mac-FrameTooLongErrors # SKIP
# ok 11 ethtool_std_stats.eth-mac-FramesAbortedDueToXSColls # SKIP
# ok 12 ethtool_std_stats.eth-mac-SingleCollisionFrames # SKIP
# ok 13 ethtool_std_stats.eth-mac-MultipleCollisionFrames # SKIP
# ok 14 ethtool_std_stats.eth-mac-FramesWithDeferredXmissions # SKIP
# ok 15 ethtool_std_stats.eth-mac-LateCollisions # SKIP
# ok 16 ethtool_std_stats.eth-mac-FramesWithExcessiveDeferral # SKIP
# ok 17 ethtool_std_stats.eth-mac-BroadcastFramesXmittedOK
# ok 18 ethtool_std_stats.eth-mac-OctetsTransmittedOK
# ok 19 ethtool_std_stats.eth-mac-BroadcastFramesReceivedOK
# ok 20 ethtool_std_stats.eth-mac-OctetsReceivedOK
# ok 21 ethtool_std_stats.eth-mac-FramesTransmittedOK
# ok 22 ethtool_std_stats.eth-mac-MulticastFramesXmittedOK
# ok 23 ethtool_std_stats.eth-mac-FramesReceivedOK
# ok 24 ethtool_std_stats.eth-mac-MulticastFramesReceivedOK
# ok 25 ethtool_std_stats.pause-tx_pause_frames
# ok 26 ethtool_std_stats.pause-rx_pause_frames
# # 10 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:10 error:0
ok 1 selftests: drivers/net/hw: ethtool_std_stats.sh
====================
Link: https://patch.msgid.link/20260330152933.2195885-1-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new selftest - ethtool_std_stats.sh - which validates the
eth-ctrl, eth-mac and pause standard statistics exported by an
interface. Collision related eth-mac counters as well as the error ones
will be checked against zero since that is the most likely correct
scenario.
The central part of this patch is the traffic_test() function which
gathers the 'before' counter values, sends a batch of traffic and then
interrogates again the same counters in order to determine if the delta
is on target. The function receives an array through which the caller
can request what counters to be interrogated and, for each of them, what
is their target delta value.
The output from this selftest looks as follows on a LX2160ARDB board:
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_std_stats.sh
# TAP version 13
# 1..26
# ok 1 ethtool_std_stats.eth-ctrl-MACControlFramesTransmitted
# ok 2 ethtool_std_stats.eth-ctrl-MACControlFramesReceived
# ok 3 ethtool_std_stats.eth-mac-FrameCheckSequenceErrors
# ok 4 ethtool_std_stats.eth-mac-AlignmentErrors
# ok 5 ethtool_std_stats.eth-mac-FramesLostDueToIntMACXmitError
# ok 6 ethtool_std_stats.eth-mac-CarrierSenseErrors # SKIP
# ok 7 ethtool_std_stats.eth-mac-FramesLostDueToIntMACRcvError
# ok 8 ethtool_std_stats.eth-mac-InRangeLengthErrors # SKIP
# ok 9 ethtool_std_stats.eth-mac-OutOfRangeLengthField # SKIP
# ok 10 ethtool_std_stats.eth-mac-FrameTooLongErrors # SKIP
# ok 11 ethtool_std_stats.eth-mac-FramesAbortedDueToXSColls # SKIP
# ok 12 ethtool_std_stats.eth-mac-SingleCollisionFrames # SKIP
# ok 13 ethtool_std_stats.eth-mac-MultipleCollisionFrames # SKIP
# ok 14 ethtool_std_stats.eth-mac-FramesWithDeferredXmissions # SKIP
# ok 15 ethtool_std_stats.eth-mac-LateCollisions # SKIP
# ok 16 ethtool_std_stats.eth-mac-FramesWithExcessiveDeferral # SKIP
# ok 17 ethtool_std_stats.eth-mac-BroadcastFramesXmittedOK
# ok 18 ethtool_std_stats.eth-mac-OctetsTransmittedOK
# ok 19 ethtool_std_stats.eth-mac-BroadcastFramesReceivedOK
# ok 20 ethtool_std_stats.eth-mac-OctetsReceivedOK
# ok 21 ethtool_std_stats.eth-mac-FramesTransmittedOK
# ok 22 ethtool_std_stats.eth-mac-MulticastFramesXmittedOK
# ok 23 ethtool_std_stats.eth-mac-FramesReceivedOK
# ok 24 ethtool_std_stats.eth-mac-MulticastFramesReceivedOK
# ok 25 ethtool_std_stats.pause-tx_pause_frames
# ok 26 ethtool_std_stats.pause-rx_pause_frames
# # 10 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:10 error:0
ok 1 selftests: drivers/net/hw: ethtool_std_stats.sh
Please note that not all MACs are counting the software injected pause
frames as real Tx pause. For example, on a LS1028ARDB the selftest
output will reflect the fact that neither the ENETC MAC, nor the Felix
switch MAC are able to detect Tx pause frames injected by software.
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
(...)
# # software sent pause frames not detected
# ok 25 ethtool_std_stats.pause-tx_pause_frames # XFAIL
# ok 26 ethtool_std_stats.pause-rx_pause_frames
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-10-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
interface
This patch finalizes the transition to work with a single local
interface for the ethtool_rmon.sh test. Each 'ip link' and 'ethtool'
command used by the test is annotated with the necessary run_on in
order to be executed on the necessary target system, be it local, in
another network namespace or through ssh.
Since we need NETIF up and running also for control traffic, we now
expect that the interfaces are up and running and do not touch bring
them up or down at the end of the test. This is also documented in the
drivers/net/README.rst.
The ethtool_rmon.sh script can still be used in the older fashion by
passing two interfaces as command line arguments, the only restriction
is that those interfaces need to be already up.
$ DRIVER_TEST_CONFORMANT=no ./ethtool_rmon.sh eth0 eth1
As part of the kselftest infrastructure, this test can be run in the
following manner:
$ make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft-net-drv
$ cd /tmp/ksft-net-drv/
$ cat > ./drivers/net/net.config <<EOF
NETIF=endpmac17
LOCAL_V4=17.0.0.1
REMOTE_V4=17.0.0.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.5.200
EOF
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_rmon.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_rmon.sh
# TAP version 13
# 1..14
# ok 1 ethtool_rmon.rx-pkts64to64
# ok 2 ethtool_rmon.rx-pkts65to127
# ok 3 ethtool_rmon.rx-pkts128to255
# ok 4 ethtool_rmon.rx-pkts256to511
# ok 5 ethtool_rmon.rx-pkts512to1023
# ok 6 ethtool_rmon.rx-pkts1024to1518
# ok 7 ethtool_rmon.rx-pkts1519to10240
# ok 8 ethtool_rmon.tx-pkts64to64
# ok 9 ethtool_rmon.tx-pkts65to127
# ok 10 ethtool_rmon.tx-pkts128to255
# ok 11 ethtool_rmon.tx-pkts256to511
# ok 12 ethtool_rmon.tx-pkts512to1023
# ok 13 ethtool_rmon.tx-pkts1024to1518
# ok 14 ethtool_rmon.tx-pkts1519to10240
# # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net/hw: ethtool_rmon.sh
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-9-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update the ethtool_rmon.sh test so that it uses the KTAP format for its
output. This is achieved by using the helpers found in ktap_helpers.sh.
An example output can be found below.
$ ./ethtool_rmon.sh endpmac3 endpmac4
TAP version 13
1..14
ok 1 ethtool_rmon.rx-pkts64to64
ok 2 ethtool_rmon.rx-pkts65to127
ok 3 ethtool_rmon.rx-pkts128to255
ok 4 ethtool_rmon.rx-pkts256to511
ok 5 ethtool_rmon.rx-pkts512to1023
ok 6 ethtool_rmon.rx-pkts1024to1518
ok 7 ethtool_rmon.rx-pkts1519to10240
ok 8 ethtool_rmon.tx-pkts64to64
ok 9 ethtool_rmon.tx-pkts65to127
ok 10 ethtool_rmon.tx-pkts128to255
ok 11 ethtool_rmon.tx-pkts256to511
ok 12 ethtool_rmon.tx-pkts512to1023
ok 13 ethtool_rmon.tx-pkts1024to1518
ok 14 ethtool_rmon.tx-pkts1519to10240
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-8-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ethtool_rmon.sh script checks that the number of packets sent /
received during a test matches the expected value with a 1% tolerance.
Since in the next patches this test will gain the capability to also be
run on systems with a single interface where the traffic generator is
accesible through ssh, use the UINT32_MAX as the upper limit. This is
necessary since the same interface will be used also for control traffic
(the ssh commands) as well as the mausezahn generated one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-7-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The selftests in drivers/net are slowly transitioning to being able to
be used on systems with a single network interface. The first step for the
ethtool_rmon.sh test is to only validate that the rmon counters are
properly exported on the first interface supplied as an argument.
Remove the rmon_histogram calls which intend to test also the rmon
counters on the 2nd interface. This also removes the need for the remote
system, which should be used only to inject traffic, to also support
rmon counters.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-6-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If run on the ethtool_rmon.sh script, shellcheck generates a bunch of
false positive errors. Suppress those checks that generate them.
Also cleanup the remaining warnings by using double quoting around the
used variables.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-5-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update some helpers so that they are capable to run commands on
different targets than the local one. This patch makes the necesasy
modification for those helpers / sections of code which are needed for
the ethtool_rmon.sh test that will be converted in the next patches.
For example, mac_addr_prepare() and mac_addr_restore() used when
STABLE_MAC_ADDRS=yes need to ensure stable MAC addresses on interfaces
located even in other namespaces. In order to do that, append the 'ip
link' commands with a 'run_on $dev' tag.
The same run_on is necessary also when verifying if all the interfaces
listed in NETIFS are indeed available.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-4-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extend lib.sh so that it's able to parse driver/net/net.config and
environment variables such as NETIF, REMOTE_TYPE, LOCAL_V4 etc described
in drivers/net/README.rst.
In order to make the transition towards running with a single local
interface smoother for the bash networking driver tests, beside sourcing
the net.config file also translate the new env variables into the old
style based on the NETIFS array. Since the NETIFS array only holds the
network interface names, also add a new array - TARGETS - which keeps
track of the target on which a specific interfaces resides - local,
netns or accesible through an ssh command.
For example, a net.config which looks like below:
NETIF=eth0
LOCAL_V4=192.168.1.1
REMOTE_V4=192.168.1.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.1.2
will generate the NETIFS and TARGETS arrays with the following data.
NETIFS[p1]="eth0"
NETIFS[p2]="eth2"
TARGETS[eth0]="local:"
TARGETS[eth2]="ssh:root@192.168.1.2"
The above will be true if on the remote target, the interface which has
the 192.168.1.2 address is named eth2.
Since the TARGETS array is indexed by the network interface name,
document a new restriction README.rst which states that the remote
interface cannot have the same name as the local one. Keep the old way
of populating the NETIFS variable based on the command line arguments.
This will be invoked in case DRIVER_TEST_CONFORMANT = "no".
Also add a couple of helpers which can be used by tests which need to
run a specific bash command on a different target than the local system,
be it either another netns or a remote system accessible through ssh.
The __run_on() function is passed through $1 the target on which the
command should be executed while run_on() is passed the name of the
interface that is then used to retrieve the target from the TARGETS
array.
Also add a stub run_on() function in net/lib.sh so that users of the
net/lib.sh are going through the stub only since neither NETIFS nor
TARGETS are valid in that circumstance.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-3-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Even though pause frame statistics are not exported through the same
ethtool command, there is no point in adding another helper just for
them. Extent the ethtool_std_stats_get() function so that we are able to
interrogate using the same helper all the standard statistics.
And since we are touching the function, convert the initial ethtool call
as well to the jq --arg form in order to be easier to read.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-2-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a comment about the use of the synchronize_rcu() invocation.
There are two invocations of the synchronize_rcu() call in the
pkey base code. On one place it is optional but used to enforce
a fast path update to the other CPUs. As some people and code
checkers complain about this redundant invocation the suggestion
came up to add a comment to explain why the call is meaningful
at that place.
Closes: https://lore.kernel.org/linux-s390/20260313052312.2389-1-lirongqing@baidu.com/
Suggested-by: Li Rongqing <lirongqing@baidu.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The create_class() api is retiring in favor of class_register() (see:
https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/).
The HMCDRV_DEV_CLASS define is hiding a use of create_class(), but it is
permanently disabled as it is commented out. To avoid supporting code
that is disabled, the suggestion is to remove all code hiding be behind
any #ifdef HMCDRV_DEV_CLASS.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260308103255.757461-1-jkoolstra@xs4all.nl
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
DMA aliasing causes interrupt remapping table entries (IRTEs) to be shared
between multiple device IDs. See commit 3c124435e8dd
("iommu/amd: Support multiple PCI DMA aliases in IRQ Remapping") for more
information on this. However, the AMD IOMMU driver currently invalidates
IRTE cache entries on a per-device basis whenever an IRTE is updated, not
for each alias.
This approach leaves stale IRTE cache entries when an IRTE is cached under
one DMA alias but later updated and invalidated through a different alias.
In such cases, the original device ID is never invalidated, since it is
programmed via aliasing.
This incoherency bug has been observed when IRTEs are cached for one
Non-Transparent Bridge (NTB) DMA alias, later updated via another.
Fix this by invalidating the interrupt remapping table cache for all DMA
aliases when updating an IRTE.
Co-developed-by: Lars B. Kristiansen <larsk@dolphinics.com>
Signed-off-by: Lars B. Kristiansen <larsk@dolphinics.com>
Co-developed-by: Jonas Markussen <jonas@dolphinics.com>
Signed-off-by: Jonas Markussen <jonas@dolphinics.com>
Co-developed-by: Tore H. Larsen <torel@simula.no>
Signed-off-by: Tore H. Larsen <torel@simula.no>
Signed-off-by: Magnus Kalland <magnus@dolphinics.com>
Link: https://lore.kernel.org/linux-iommu/9204da81-f821-4034-b8ad-501e43383b56@amd.com/
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
There appears to have been a silent merge conflict between some commits
updating the workaround tables on Xe's -fixes and -next branches:
- Commit bc6387a2e0c1 ("drm/xe/xe2_hpg: Fix handling of Wa_14019988906
& Wa_14019877138") from the fixes branch moved the Xe2_HPG instance
of two workarounds touching the PSS_CHICKEN register from the
engine_was[] table to the lrc_was[] table; the equivalent
implementation for all other platforms/IPs were already properly
located on lrc_was[]. This commit on the fixes branch is a
cherry-pick of commit e04c609eedf4 ("drm/xe/xe2_hpg: Fix handling of
Wa_14019988906 & Wa_14019877138") that already existed on the next
branch.
- Commit 55b19abb6c44 ("drm/xe: Consolidate workaround entries for
Wa_14019877138") and commit c2142a1a8415 ("drm/xe: Consolidate
workaround entries for Wa_14019988906") consolidated the individual
entries per IP generation for each workaround into single, larger
range-based entries.
During merge conflict resolution the Xe2_HPG-specific entries (i.e.,
those with rule "GRAPHICS_VERSION_RANGE(2001, 2002)") were accidentally
resurrected, even though the table already contains the consolidated
entries that match a superset of thse ranges. These redundant entries
don't cause any build failures but do trigger a dmesg error during probe
on BMG-G21 devices:
xe 0000:03:00.0: [drm] *ERROR* Tile0: GT0: discarding save-restore reg 7044 (clear: 00000400, set: 00000400, masked: yes, mcr: yes): ret=-22
xe 0000:03:00.0: [drm] *ERROR* Tile0: GT0: discarding save-restore reg 7044 (clear: 00000020, set: 00000020, masked: yes, mcr: yes): ret=-22
Re-drop the Xe2_HPG-specific table entries to eliminate the error.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7433
Fixes: 17b95278ae6a ("Merge tag 'drm-xe-next-2026-03-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next")
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260401-wa_merge_conflict-v1-1-b477ab53fedc@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
If thermal_zone_device_register_with_trips() fails after registering
a thermal zone device, it needs to wait for the tz->removal completion
like thermal_zone_device_unregister(), in case user space has managed
to take a reference to the thermal zone device's kobject, in which case
thermal_release() may not be called by the error path itself and tz may
be freed prematurely.
Add the missing wait_for_completion() call to the thermal zone device
registration error path.
Fixes: 04e6ccfc93c5 ("thermal: core: Fix NULL pointer dereference in zone registration error path")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2849815.mvXUDI8C0e@rafael.j.wysocki
|
|
Currently we have a return code on the driver pointer operation but the
core ignores that. Let's start paying attention.
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260401-alsa-unconfigured-tstamp-v1-2-694c2cb5f71d@kernel.org
|
|
There are a number of mechanisms, including the userspace accessible
timestamp and buffer availability ioctl()s, which allow us to trigger
a timestamp update on a stream before it has been configured. Since
drivers might rely on stream configuration for reporting of pcm_io_frames,
including potentially doing a division by the number of channels, and
these operations are not meaningful for an unconfigured stream reject
attempts to read timestamps before any configuration is done.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260401-alsa-unconfigured-tstamp-v1-1-694c2cb5f71d@kernel.org
|
|
into rust-next
Pull rust-analyzer updates from Tamir Duberstein:
- Add type annotations to 'generate_rust_analyzer.py'.
- Add support for scripts written in Rust ('generate_rust_target.rs',
'rustdoc_test_builder.rs', 'rustdoc_test_gen.rs').
- Refactor 'generate_rust_analyzer.py' to explicitly identify host and
target crates, improve readability, and reduce duplication.
* tag 'rust-analyzer-v7.1' of https://github.com/Rust-for-Linux/linux:
scripts: generate_rust_analyzer.py: reduce cfg plumbing
scripts: generate_rust_analyzer.py: rename cfg to generated_cfg
scripts: generate_rust_analyzer.py: avoid FD leak
scripts: generate_rust_analyzer.py: define scripts
scripts: generate_rust_analyzer.py: identify crates explicitly
scripts: generate_rust_analyzer.py: add type hints
scripts: generate_rust_analyzer.py: drop `"is_proc_macro": false`
scripts: generate_rust_analyzer.py: extract `{build,register}_crate`
|
|
Several functions have BUG_ON/WARN_ON sanity checks that want to verify
that dentry is not positive and instead of looking at ->d_inode (as we
do in all other places that check that) they look at ->d_alias.
Just use the normal helpers instead - that way we no longer even look
at ->d_alias for negative dentries
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
erofs_ioctl_get_volume_label() passes strlen(sbi->volume_name) as
the length to copy_to_user(), which copies the label string without
the trailing NUL byte. Since FS_IOC_GETFSLABEL callers expect a
NUL-terminated string in the FSLABEL_MAX-sized buffer and may not
pre-zero the buffer, this can cause userspace to read past the label
into uninitialised stack memory.
Fix this by using strlen() + 1 to include the NUL terminator,
consistent with how ext4 and xfs implement FS_IOC_GETFSLABEL.
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Fixes: 1cf12c717741 ("erofs: Add support for FS_IOC_GETFSLABEL")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
folio_trylock() in erofs_try_to_free_all_cached_folios() may
successfully acquire the folio lock, but the subsequent check
for erofs_folio_is_managed() can skip unlocking when the folio
is not managed by EROFS.
As Gao Xiang pointed out, this condition should not happen in
practice because compressed_bvecs[] only holds valid cached folios
at this point — any non-managed folio would have already been
detached by z_erofs_cache_release_folio() under folio lock.
Fix this by adding DBG_BUGON() to catch unexpected folios
and ensure folio_unlock() is always called.
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
For file-backed mounts, metadata is fetched via the page cache of
backing inodes to avoid double caching and redundant copy ops out
of RO uptodate folios, which is used by Android APEXes, ComposeFS,
containerd. However, rw_verify_area() was missing prior to
metadata accesses.
Similar to vfs_iocb_iter_read(), fix this by:
- Enabling fanotify pre-content hooks on metadata accesses;
- security_file_permission() for security modules.
Verified that fanotify pre-content hooks now works correctly.
Fixes: fb176750266a ("erofs: add file-backed mount support")
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260331184844.2388761-1-sigmaepsilon92@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip_pad_iso() repositions ISO frame data within the transfer buffer
via memmove(). Neither the source offset (actualoffset, derived by
subtracting wire-supplied actual_length values) nor the destination
offset (iso_frame_desc[i].offset, taken directly from the wire) is
bounds-checked.
If a crafted actual_length wraps actualoffset negative through the
subtraction (see patch 2/3 for the root cause), the memmove source
points before the allocation - slab OOB read, data returned to
userspace.
Independently, iso_frame_desc[i].offset is never validated against
transfer_buffer_length. Setting offset past the end of the buffer
gives a fully controlled OOB write into whatever sits next in the
slab - confirmed with offset=400 on a 392-byte buffer, 64-byte write.
Add bounds checks for both the source and destination ranges before
each memmove call. Use unsigned comparisons after the sign check on
actualoffset to avoid signed/unsigned conversion surprises.
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-3-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip_recv_iso() sums each frame's actual_length into an int
accumulator without checking the individual values first:
total_length += urb->iso_frame_desc[i].actual_length;
A malicious server can send actual_length = 0xFFFFFFFC for one frame
and a small value for the other, making the signed sum wrap around to
match urb->actual_length. The sanity check passes, and usbip_pad_iso()
later computes a negative actualoffset, feeding it to memmove() as a
source pointer - reads before the allocation, leaked to userspace via
USBDEVFS_REAPURB.
Reject any frame whose actual_length exceeds transfer_buffer_length
(one frame can't carry more data than the whole buffer), and widen the
accumulator to u32 so that many moderately-large frames can't wrap it
either.
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-2-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbip_recv_iso() computes the iso descriptor buffer size as:
int size = np * sizeof(*iso);
where np comes straight from the wire (urb->number_of_packets, set by
usbip_pack_ret_submit() before we get here). With np = 0x10000001 and
sizeof(*iso) == 16 the product is 0x100000010 which truncates to 16 on
a 32-bit int. kzalloc(16) succeeds but the following receive loop
writes np * 16 bytes into it - game over.
USBIP_MAX_ISO_PACKETS (1024) already exists in usbip_common.h for the
submit path but was never enforced on the receive side.
Clamp np to [1, USBIP_MAX_ISO_PACKETS] and switch to kcalloc() so
the allocator itself can catch overflows in the future. Fold the
existing np == 0 early return into the new bounds check.
usbip_pack_ret_submit() already copied the bogus np into
urb->number_of_packets before we run, so just returning -EPROTO is
not enough - processcompl() in the HCD will still iterate that many
iso_frame_desc entries when it completes the failed URB. Zero out
urb->number_of_packets before bailing to prevent that secondary crash
(confirmed on 6.12.0, processcompl+0x63 with CR2 in unmapped slab).
Signed-off-by: Kelvin Mbogo <addcontent08@gmail.com>
Link: https://patch.msgid.link/20260325103640.8090-1-addcontent08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Making ->d_rcu and (then) ->d_child overlapping dates back to
2006; anon unions support had been added to gcc only in 4.6
(2011) and the minimal gcc version hadn't been bumped to that
until 4.19 (2018).
These days there's no reason not to keep that union named.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This is xe core code, use struct xe_device for simplicity.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/56bd532dc5cf460cdbf17c7781f18db5378a28e6.1774950508.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This is i915 core code, use struct drm_i915_private for simplicity.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/321edddfd7509fd2cff0303747cdf18bb0cb911d.1774950508.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the driver specific fbdev fb calls to the display parent
interface. Reuse the existing struct intel_display_bo_interface, as this
is mostly about gem objects.
Put everything behind IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION) to catch
configuration issues at build or link time.
v2: Rebase
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Link: https://patch.msgid.link/a6bb24909a58181cfc41b91a4c6538a181d27158.1774950508.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most of the places using d_alias are loops iterating through all aliases for
given inode; introduce a helper macro (for_each_alias(dentry, inode))
and convert open-coded instances of such loop to it.
They are easier to read that way and it reduces the noise on the next steps.
You _must_ hold inode->i_lock over that thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove usb_offload_get() and usb_offload_put() from the xHCI sideband
interrupter creation and removal paths.
The responsibility of manipulating offload_usage now lies entirely with
the USB class drivers. They have the precise context of when an offload
data stream actually starts and stops, ensuring a much more accurate
representation of offload activity for power management.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803aab ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Tested-by: hailong.liu@oppo.com
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the coarse USB device lock with a dedicated offload_lock
spinlock to reduce contention during offload operations. Use
offload_pm_locked to synchronize with PM transitions and replace
the legacy offload_at_suspend flag.
Optimize usb_offload_get/put by switching from auto-resume/suspend
to pm_runtime_get_if_active(). This ensures offload state is only
modified when the device is already active, avoiding unnecessary
power transitions.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803aab ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an entry for the interconnect Kunit tests. As the original author
of this test suite, I would like to be notified of future related
patches so I can help review them.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://msgid.link/20260320190623.1846992-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
debugfs_write_file_str() uses standard kfree() to release old strings.
Initializing src_node and dst_node with devm_kstrdup() creates a memory
management mismatch. If a user writes to these debugfs nodes, the
devm-allocated memory is freed via kfree(), leaving a dangling pointer
in the device resource list that can lead to a double free.
Fix this by using standard kstrdup() instead. Since the interconnect
subsystem is strictly built-in and cannot be unloaded as a module, there
is no exit path requiring manual cleanup of these strings. The error
handling path is also simplified by taking advantage of the fact that
kfree(NULL) is a safe no-op.
Fixes: 8cc27f5c6dd1 ("interconnect: debugfs: initialize src_node and dst_node to empty strings")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://msgid.link/20260318024815.7655-1-hanguidong02@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode
while software state remains INACTIVE, creating hardware/software state
inconsistency.
When switching to host mode via sysfs:
echo host > /sys/class/usb_role/13180000.usb-role-switch/role
The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error,
so cdns_role_stop() skips cleanup because state is still INACTIVE.
This violates the DRD controller design specification (Figure22),
which requires returning to idle state before switching roles.
This leads to a synchronous external abort in xhci_gen_setup() when
setting up the host controller:
[ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19
[ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget
[ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed
...
[ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 1301.382485] pc : xhci_gen_setup+0xa4/0x408
[ 1301.393391] backtrace:
...
xhci_gen_setup+0xa4/0x408 <-- CRASH
xhci_plat_setup+0x44/0x58
usb_add_hcd+0x284/0x678
...
cdns_role_set+0x9c/0xbc <-- Role switch
Fix by calling cdns_drd_gadget_off() in the error path to properly
clean up the DRD gadget state.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260401001000.5761-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When platform_get_drvdata() returns NULL and probe defers, the error
path jumps to the 'depopulate' label, skipping put_device() for the
reference acquired by of_find_device_by_node(). This extra reference
prevents the child platform device from being freed when
of_platform_depopulate() is called, resulting in memory leaks reported
by kmemleak:
unreferenced object 0xffff0000c92c1480 (size 64):
comm "kworker/u16:2", pid 50, jiffies 4294895789
backtrace (crc 49d507d0):
kmemleak_alloc+0x34/0x40
__kmalloc_noprof+0x430/0x670
of_device_alloc+0xec/0x26c
of_platform_device_create_pdata+0x60/0x1f0
of_platform_bus_create+0x290/0x610
of_platform_populate+0x74/0x118
dwc3_imx8mp_probe+0x228/0x734
Fixes: 86767625f525 ("usb: dwc3: imx8mp: disable auto suspend for host role")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260401134938.686748-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object.
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260401191311.3604898-1-hataegu0826@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface().
Fixes: 289fcff4bcdb1 ("usb: add bus type for USB ULPI")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260401025142.1398996-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path.
Fixes: 121a0f839dbb ("usb: misc: Add Intel USBIO bridge driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260331-usbio-v2-1-d8c48dad9463@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since RISC-V supports a sign extended page table it should support
a gather->end of ULONG_MAX, but if this happens it will infinite loop
because of the overflow.
Also avoid overflow computing the length by moving the +1 to the other
side of the <
Fixes: 488ffbf18171 ("iommu/riscv: Paging domain support")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it.
Fixes: 3332364e4ebc ("iommu/amd: Support multiple PCI DMA aliases in device table")
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The Razer Kiyo Pro (1532:0e05) is a USB 3.0 UVC webcam whose firmware
does not handle USB Link Power Management transitions reliably. When LPM
is active, the device can enter a state where it fails to respond to
control transfers, producing EPIPE (-32) errors on UVC probe control
SET_CUR requests. In the worst case, the stalled endpoint triggers an
xHCI stop-endpoint command that times out, causing the host controller
to be declared dead and every USB device on the bus to be disconnected.
This has been reported as Ubuntu Launchpad Bug #2061177. The failure
mode is:
1. UVC probe control SET_CUR returns -32 (EPIPE)
2. xHCI host not responding to stop endpoint command
3. xHCI host controller not responding, assume dead
4. All USB devices on the affected xHCI controller disconnect
Disabling LPM prevents the firmware from entering the problematic low-
power states that precede the stall. This is the same approach used for
other webcams with similar firmware issues (e.g., Logitech HD Webcam C270).
Cc: stable <stable@kernel.org>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2061177
Signed-off-by: JP Hein <jp@jphein.com>
Link: https://patch.msgid.link/20260331003806.212565-2-jp@jphein.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
