| Age | Commit message (Collapse) | Author |
|---|
|
If 'readelf -n' encounters a note it does not recognize it emits a
warning. This for example happens when inspecting a compat vDSO for
which the main kernel toolchain was not used.
However the relevant build ID note is always readable, so the
warnings are pointless.
Hide the warnings to make it possible to extract build IDs for more
architectures in the future.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260331-kbuild-vdso-install-v2-2-606d0dc6beca@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
Split up the logic as some upcoming changes to the readelf invocation
would create a very long line otherwise.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260331-kbuild-vdso-install-v2-1-606d0dc6beca@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
On systems with 64K pages, RX queues will be wedged if users set the
descriptor count to the current minimum (16). Fbnic fragments large
pages into 4K chunks, and scales down the ring size accordingly. With
64K pages and 16 descriptors, the ring size mask is 0 and will never
be filled.
32 descriptors is another special case that wedges the RX rings.
Internally, the rings track pages for the head/tail pointers, not page
fragments. So with 32 descriptors, there's only 1 usable page as one
ring slot is kept empty to disambiguate between an empty/full ring.
As a result, the head pointer never advances and the HW stalls after
consuming 16 page fragments.
Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260401162848.2335350-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This patchset contains few fixes for the bugs hit during testing with
Monza EVK platform
- around array out of bounds access on dai ids which keep extending but
the drivers seems to have hardcoded some numbers, fix this and clean
the mess up
- fix few issues discovered while trying to shut down dsp.
- flooding rpmsg with write requests due to not resetting queue pointer,
fix this resetting the pointer in trigger stop.
- possible multiple graph opens which can result in open failures.
Apart from this few new enhancements to the dsp side
- add new LPI MI2S and senary dai entries
- handle pipewire and Displayport issues by moving graph start to
trigger level, which should fix outstanding pipewire and DP issues on
Qualcomm SoCs.
- remove some unnessary loops in hot path
- support early memory map on DSP.
Tested this on top of linux-next on VENTUNO-Q platform.
|
|
Buffers are allocated on pcm_new and mapped in the dsp on every
prepare call, which is inefficient and unnecessary.
Add new functions q6apm_[un]map_memory_fixed_region to map it on
to dsp only once after allocation.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove searching for Shared Memory module instance id on every
read/write call, this is un-necessary if we can cache the shared
memory module instance id per PCM graph.
Add new member to graph struct to store shared memory module
instance id to avoid searching for this in hot path.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Start the graph at trigger callback. Staring the graph at prepare does
not make sense as there is no data transfer at this point.
Moving this to trigger will also help cope situation where pipewire
is not happy if display port is not connected during start.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the error message to reflect the actual graph stop error
instead of graph close error.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-11-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduces support for the Senary MI2S audio interface in the Qualcomm
q6dsp. Add new AFE port IDs for Senary MI2S RX and TX and include the
necessary mappings in the port configuration to allow audio routing
over the Senary MI2S interface.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # sm7325-motorola-dubai
Link: https://patch.msgid.link/20260402081118.348071-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for LPASS LPI MI2S dais in the dai-driver, these dais are
used in Monaco based platform devices.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-9-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
lpass ports numbers have been added but the afe/apm driver never got
updated with new max port value that it uses to store dai specific data.
There are more than one places these values are cached and always become
out of sync.
This will result in array out of bounds and weird driver behaviour.
To catch such issues, first add a single place where we can define max
port and second add a check in common parsing code which can error
out before corrupting the memory with out of bounds array access.
This should help both avoid and catch these type of mistakes in future.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new dai ids entries for LPASS LPI MI2S and SENARY MI2S audio lines.
Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reset queue pointer on SNDRV_PCM_TRIGGER_STOP event to be inline
with resetting appl_ptr. Without this we will end up with a queue_ptr
out of sync and driver could try to send data that is not ready yet.
Fix this by resetting the queue_ptr.
Fixes: 3d4a4411aa8bb ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As prepare can be called mulitple times, this can result in multiple
graph opens for playback path.
This will result in a memory leaks, fix this by adding a check before
opening.
Fixes: be1fae62cf25 ("ASoC: q6apm-lpass-dai: close graph on prepare errors")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check widget type before accessing the private data, as this could a
virtual widget which is no associated with a dsp graph, container and
module. Accessing witout check could lead to incorrect memory access.
Fixes: 36ad9bf1d93d ("ASoC: qdsp6: audioreach: add topology support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
looks like q6apm driver does not remove the child driver q6apm-dai and
q6apm-bedais when the this driver is removed.
Fix this by depopulating them in remove callback.
With this change when the dsp is shutdown all the devices associated with
q6apm will now be removed.
Fixes: 5477518b8a0e ("ASoC: qdsp6: audioreach: add q6apm support")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
q6apm component registers dais dynamically from ASoC toplology, which
are allocated using device managed version apis. Allocating both
component and dynamic dais using managed version could lead to incorrect
free ordering, dai will be freed while component still holding references
to it.
Fix this issue by moving component to unmanged version so
that the dai pointers are only freeded after the component is removed.
==================================================================
BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426
Tainted: [W]=WARN
Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024
Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]
Call trace:
show_stack+0x28/0x7c (C)
dump_stack_lvl+0x60/0x80
print_report+0x160/0x4b4
kasan_report+0xac/0xfc
__asan_report_load8_noabort+0x20/0x34
snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core]
devm_component_release+0x30/0x5c [snd_soc_core]
devres_release_all+0x13c/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Allocated by task 77:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x44/0x58
__kasan_kmalloc+0xbc/0xdc
__kmalloc_node_track_caller_noprof+0x1f4/0x620
devm_kmalloc+0x7c/0x1c8
snd_soc_register_dai+0x50/0x4f0 [snd_soc_core]
soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core]
snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core]
audioreach_tplg_init+0x124/0x1fc [snd_q6apm]
q6apm_audio_probe+0x10/0x1c [snd_q6apm]
snd_soc_component_probe+0x5c/0x118 [snd_soc_core]
soc_probe_component+0x44c/0xaf0 [snd_soc_core]
snd_soc_bind_card+0xad0/0x2370 [snd_soc_core]
snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core]
devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core]
x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100]
platform_probe+0xc0/0x188
really_probe+0x188/0x804
__driver_probe_device+0x158/0x358
driver_probe_device+0x60/0x190
__device_attach_driver+0x16c/0x2a8
bus_for_each_drv+0x100/0x194
__device_attach+0x174/0x380
device_initial_probe+0x14/0x20
bus_probe_device+0x124/0x154
deferred_probe_work_func+0x140/0x220
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Freed by task 3426:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
__kasan_save_free_info+0x4c/0x80
__kasan_slab_free+0x78/0xa0
kfree+0x100/0x4a4
devres_release_all+0x144/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Fixes: 5477518b8a0e ("ASoC: qdsp6: audioreach: add q6apm support")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
batadv_tt_prepare_tvlv_global_data() builds the allocation length for a
global TT response in 16-bit temporaries. When a remote originator
advertises a large enough global TT, the TT payload length plus the VLAN
header offset can exceed 65535 and wrap before kmalloc().
The full-table response path still uses the original TT payload length when
it fills tt_change, so the wrapped allocation is too small and
batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object
before the later packet-size check runs.
Fix this by rejecting TT responses whose TVLV value length cannot fit in
the 16-bit TVLV payload length field.
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Ruide Cao <caoruide123@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
- Reproducible with a small userspace PoC.
</quote>
This patch does not reject duplicated options, as this might break
some user applications.
Instead, it makes sure to adjust opt_flen and opt_nflen to correctly
reflect the size of the current option headers, preventing the overflows
and the potential for panics.
This applies to IPV6_DSTOPTS, IPV6_HOPOPTS, and IPV6_RTHDR.
Specifically:
When a new IPV6_DSTOPTS is processed, the length of the old opt->dst1opt
is subtracted from opt->opt_flen before adding the new length.
When a new IPV6_HOPOPTS is processed, the length of the old opt->dst0opt
is subtracted from opt->opt_nflen.
When a new Routing Header (IPV6_RTHDR or IPV6_2292RTHDR) is processed,
the length of the old opt->srcrt is subtracted from opt->opt_nflen.
In the special case within IPV6_2292RTHDR handling where dst1opt is moved
to dst0opt, the length of the old opt->dst0opt is subtracted from
opt->opt_nflen before the new one is added.
Fixes: 333fad5364d6 ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542).")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Closes: https://lore.kernel.org/netdev/CAL_bE8JNzawgr5OX5m+3jnQDHry2XxhQT5=jThW1zDPtUikRYA@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260401154721.3740056-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luka Gejak says:
====================
net: hsr: fixes for PRP duplication and VLAN unwind
This series addresses two logic bugs in the HSR/PRP implementation
identified during a protocol audit. These are targeted for the 'net'
tree as they fix potential memory corruption and state inconsistency.
The primary change resolves a race condition in the node merging path by
implementing address-based lock ordering. This ensures that concurrent
mutations of sequence blocks do not lead to state corruption or
deadlocks.
An additional fix corrects asymmetric VLAN error unwinding by
implementing a centralized unwind path on slave errors.
====================
Link: https://patch.msgid.link/20260401092243.52121-1-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When vlan_vid_add() fails for a secondary slave, the error path calls
vlan_vid_del() on the failing port instead of the peer slave that had
already succeeded. This results in asymmetric VLAN state across the HSR
pair.
Fix this by switching to a centralized unwind path that removes the VID
from any slave device that was already programmed.
Fixes: 1a8a63a5305e ("net: hsr: Add VLAN CTAG filter support")
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260401092243.52121-3-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During node merging, hsr_handle_sup_frame() walks node_curr->seq_blocks
to update node_real without holding node_curr->seq_out_lock. This
allows concurrent mutations from duplicate registration paths, risking
inconsistent state or XArray/bitmap corruption.
Fix this by locking both nodes' seq_out_lock during the merge.
To prevent ABBA deadlocks, locks are acquired in order of memory
address.
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Fixes: 415e6367512b ("hsr: Implement more robust duplicate discard for PRP")
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260401092243.52121-2-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The `child_ns_mode_locked` field lives in `struct net`, which persists
across vsock module reloads. When the module is unloaded and reloaded,
`vsock_net_init()` resets `mode` and `child_ns_mode` back to their
default values, but does not reset `child_ns_mode_locked`.
The stale lock from the previous module load causes subsequent writes
to `child_ns_mode` to silently fail: `vsock_net_set_child_mode()` sees
the old lock, skips updating the actual value, and returns success
when the requested mode matches the stale lock. The sysctl handler
reports no error, but `child_ns_mode` remains unchanged.
Steps to reproduce:
$ modprobe vsock
$ echo local > /proc/sys/net/vsock/child_ns_mode
$ cat /proc/sys/net/vsock/child_ns_mode
local
$ modprobe -r vsock
$ modprobe vsock
$ echo local > /proc/sys/net/vsock/child_ns_mode
$ cat /proc/sys/net/vsock/child_ns_mode
global <--- expected "local"
Fix this by initializing `child_ns_mode_locked` to 0 (unlocked) in
`vsock_net_init()`, so the write-once mechanism works correctly after
module reload.
Fixes: 102eab95f025 ("vsock: lock down child_ns_mode as write-once")
Reported-by: Jin Liu <jinl@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260401092153.28462-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Relying on $(wildcard) is brittle and non-deterministic.
similar to all the other headers.
Switch the list of architecture headers to an explicit list,
Link: https://patch.msgid.link/20260401-nolibc-cleanup-v1-4-bcf4c9f5c1be@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Q is already defined by tools/scripts/Makefile.include which is included
at the top of tools/include/nolibc/Makefile.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260401-nolibc-cleanup-v1-3-bcf4c9f5c1be@weissschuh.net
|
|
The call to 'mkdir -p $(OUTPUT)sysroot/include' will also create the
sysroot directory.
Drop the unnecessary explicit invocation of mkdir.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260401-nolibc-cleanup-v1-2-bcf4c9f5c1be@weissschuh.net
|
|
The headers_install target of the toplevel Makefile will already make
sure that the headers are up-to-date.
Drop the superfluous explicit invocation.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260401-nolibc-cleanup-v1-1-bcf4c9f5c1be@weissschuh.net
|
|
The function memory_block_add_nid() was renamed to
memory_block_add_nid_early() by commit 0a947c14e48c
("drivers/base: move memory_block_add_nid() into the
caller"). Update the stale reference in add_memory_block().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Link: https://patch.msgid.link/20260321105704.6093-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently it's unclear if one may or may not rely on the error codes
returned from the property getters to check for the property presence.
Clarify this by updating kernel-doc for fwnode_property_*() and
device_property_*() where it's applicable.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/4b24f1f4-b395-467a-81b7-1334a2d48845@roeck-us.net
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260318142404.2526642-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CSC has firmware status registers in MMIO and they may be
unaccessible while device is suspended.
Wake device while reading firmware status via sysfs.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-8-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel PCI driver for chassis controller embedded in Intel graphics
devices.
An MEI device here called CSC can be embedded in discrete
Intel graphics devices having separate PCI device, to support a range
of chassis tasks such as graphics card firmware update and security tasks.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-7-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ensure that callers receive only < 0 return value on error.
Convert PCI error returned by pci_read_config_dword()
to common errno before returning from function.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-6-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend debug capabilities.
Add return value print in the trace_mei_pci_cfg_read().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-5-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move register trace near it actual read in the firmware status callback
and make it adhere to the actual read type.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-4-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
%01d is equal to %d, simplify the format.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop old local MEI_PCI_DEVICE macro and use common
PCI_DEVICE_DATA instead.
Update defines to adhere to current naming convention.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260201094358.1440593-2-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the sonypi ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/2277493.Mh6RI2rZIc@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move a #define so that it is not between kernel-doc and its struct
declaration.
Spell one struct member correctly.
Warning: include/linux/platform_data/apds990x.h:33 #define
APDS_PARAM_SCALE 4096; error: Cannot parse struct or union!
Warning: include/linux/platform_data/apds990x.h:62 struct member
'pdrive' not described in 'apds990x_platform_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226051207.547152-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kcalloc() with kzalloc_objs() when allocating the endpoint
address array to keep the size type-safe and match nearby allocations.
Reformat ->busy_urbs allocation to a single line. No functional change.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260225180329.712101-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the HPET ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3611505.QJadu78ljV@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'occured' -> 'occurred' (two instances)
Found by manual inspection.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Link: https://patch.msgid.link/20260220120904.1907108-1-tomasz.unger@yahoo.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A driver for the Sun BPP hardware exists in the kernel.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260131032403.11118-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Two char drivers have unnecessary module_init and module_exit functions
that are empty or just print a message. Remove them. Note that if a
module_init function exists, a module_exit function must also exist;
otherwise, the module cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260131020027.45775-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The speakup documentation had a TODO about accepted values for the
bleeps parameter. drivers/accessibility/speakup/main.c indicates
that it's a bitmasked param where bit 0 controls beeping and bit 1
controls announcements.
Signed-off-by: Henry Zhang <zeri@umich.edu>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://patch.msgid.link/20260128014501.1600263-1-zeri@umich.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I don't want get_maintainer.pl to automatically print my email.
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Link: https://patch.msgid.link/20260324082928.3473789-1-safinaskar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Buffer size used in dma allocation and memcpy is wrong.
It can lead to undersized DMA buffer access and possible
memory corruption. use correct buffer size in dma_alloc_coherent
and memcpy.
Fixes: 737c0c8d07b5 ("nvmem: zynqmp_nvmem: Add support to access efuse")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Vera <ivanverasantos@gmail.com>
Signed-off-by: Harish Ediga <harish.ediga@amd.com>
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260327131645.3025781-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid getting error messages at startup like the following on i.MX6ULL:
nvmem imx-ocotp0: cell mac-addr raw len 6 unaligned to nvmem word size 4
nvmem imx-ocotp0: cell mac-addr raw len 6 unaligned to nvmem word size 4
This shouldn't cause any functional change as this alignment would
otherwise be done in nvmem_cell_info_to_nvmem_cell_entry_nodup().
Cc: stable@vger.kernel.org
Fixes: 13bcd440f2ff ("nvmem: core: verify cell's raw_len")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260327131645.3025781-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Change pps_class to be a const struct class and drop the
class_create() call.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260302151132.3302993-1-jkoolstra@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Replace cdev_component->class with a const struct class and drop
the class_create() call. Compile tested only.
Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260401170043.3844117-1-jkoolstra@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Change pps_gen_class to be a const struct class and drop the
class_create() call.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://patch.msgid.link/20260302142436.3292766-1-jkoolstra@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
