| Age | Commit message (Collapse) | Author |
|---|
|
The semantics of pXd_leaf() are very similar to pXd_sect(). The only
difference is that pXd_sect() only considers it a section if PTE_VALID
is set, whereas pXd_leaf() permits both "valid" and "present-invalid"
types.
Using pXd_sect() has caused issues now that large leaf entries can be
present-invalid since commit a166563e7ec37 ("arm64: mm: support large
block mapping when rodata=full"), so let's just remove the API and
standardize on pXd_leaf().
There are a few callsites of the form pXd_leaf(READ_ONCE(*pXdp)). This
was previously fine for the pXd_sect() macro because it only evaluated
its argument once. But pXd_leaf() evaluates its argument multiple times.
So let's avoid unintended side effects by reimplementing pXd_leaf() as
an inline function.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
It has been possible for a long time to mark ptes in the linear map as
invalid. This is done for secretmem, kfence, realm dma memory un/share,
and others, by simply clearing the PTE_VALID bit. But until commit
a166563e7ec37 ("arm64: mm: support large block mapping when
rodata=full") large leaf mappings were never made invalid in this way.
It turns out various parts of the code base are not equipped to handle
invalid large leaf mappings (in the way they are currently encoded) and
I've observed a kernel panic while booting a realm guest on a
BBML2_NOABORT system as a result:
[ 15.432706] software IO TLB: Memory encryption is active and system is using DMA bounce buffers
[ 15.476896] Unable to handle kernel paging request at virtual address ffff000019600000
[ 15.513762] Mem abort info:
[ 15.527245] ESR = 0x0000000096000046
[ 15.548553] EC = 0x25: DABT (current EL), IL = 32 bits
[ 15.572146] SET = 0, FnV = 0
[ 15.592141] EA = 0, S1PTW = 0
[ 15.612694] FSC = 0x06: level 2 translation fault
[ 15.640644] Data abort info:
[ 15.661983] ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
[ 15.694875] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[ 15.723740] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 15.755776] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081f3f000
[ 15.800410] [ffff000019600000] pgd=0000000000000000, p4d=180000009ffff403, pud=180000009fffe403, pmd=00e8000199600704
[ 15.855046] Internal error: Oops: 0000000096000046 [#1] SMP
[ 15.886394] Modules linked in:
[ 15.900029] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc4-dirty #4 PREEMPT
[ 15.935258] Hardware name: linux,dummy-virt (DT)
[ 15.955612] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 15.986009] pc : __pi_memcpy_generic+0x128/0x22c
[ 16.006163] lr : swiotlb_bounce+0xf4/0x158
[ 16.024145] sp : ffff80008000b8f0
[ 16.038896] x29: ffff80008000b8f0 x28: 0000000000000000 x27: 0000000000000000
[ 16.069953] x26: ffffb3976d261ba8 x25: 0000000000000000 x24: ffff000019600000
[ 16.100876] x23: 0000000000000001 x22: ffff0000043430d0 x21: 0000000000007ff0
[ 16.131946] x20: 0000000084570010 x19: 0000000000000000 x18: ffff00001ffe3fcc
[ 16.163073] x17: 0000000000000000 x16: 00000000003fffff x15: 646e612065766974
[ 16.194131] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 16.225059] x11: 0000000000000000 x10: 0000000000000010 x9 : 0000000000000018
[ 16.256113] x8 : 0000000000000018 x7 : 0000000000000000 x6 : 0000000000000000
[ 16.287203] x5 : ffff000019607ff0 x4 : ffff000004578000 x3 : ffff000019600000
[ 16.318145] x2 : 0000000000007ff0 x1 : ffff000004570010 x0 : ffff000019600000
[ 16.349071] Call trace:
[ 16.360143] __pi_memcpy_generic+0x128/0x22c (P)
[ 16.380310] swiotlb_tbl_map_single+0x154/0x2b4
[ 16.400282] swiotlb_map+0x5c/0x228
[ 16.415984] dma_map_phys+0x244/0x2b8
[ 16.432199] dma_map_page_attrs+0x44/0x58
[ 16.449782] virtqueue_map_page_attrs+0x38/0x44
[ 16.469596] virtqueue_map_single_attrs+0xc0/0x130
[ 16.490509] virtnet_rq_alloc.isra.0+0xa4/0x1fc
[ 16.510355] try_fill_recv+0x2a4/0x584
[ 16.526989] virtnet_open+0xd4/0x238
[ 16.542775] __dev_open+0x110/0x24c
[ 16.558280] __dev_change_flags+0x194/0x20c
[ 16.576879] netif_change_flags+0x24/0x6c
[ 16.594489] dev_change_flags+0x48/0x7c
[ 16.611462] ip_auto_config+0x258/0x1114
[ 16.628727] do_one_initcall+0x80/0x1c8
[ 16.645590] kernel_init_freeable+0x208/0x2f0
[ 16.664917] kernel_init+0x24/0x1e0
[ 16.680295] ret_from_fork+0x10/0x20
[ 16.696369] Code: 927cec03 cb0e0021 8b0e0042 a9411c26 (a900340c)
[ 16.723106] ---[ end trace 0000000000000000 ]---
[ 16.752866] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 16.792556] Kernel Offset: 0x3396ea200000 from 0xffff800080000000
[ 16.818966] PHYS_OFFSET: 0xfff1000080000000
[ 16.837237] CPU features: 0x0000000,00060005,13e38581,957e772f
[ 16.862904] Memory Limit: none
[ 16.876526] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
This panic occurs because the swiotlb memory was previously shared to
the host (__set_memory_enc_dec()), which involves transitioning the
(large) leaf mappings to invalid, sharing to the host, then marking the
mappings valid again. But pageattr_p[mu]d_entry() would only update the
entry if it is a section mapping, since otherwise it concluded it must
be a table entry so shouldn't be modified. But p[mu]d_sect() only
returns true if the entry is valid. So the result was that the large
leaf entry was made invalid in the first pass then ignored in the second
pass. It remains invalid until the above code tries to access it and
blows up.
The simple fix would be to update pageattr_pmd_entry() to use
!pmd_table() instead of pmd_sect(). That would solve this problem.
But the ptdump code also suffers from a similar issue. It checks
pmd_leaf() and doesn't call into the arch-specific note_page() machinery
if it returns false. As a result of this, ptdump wasn't even able to
show the invalid large leaf mappings; it looked like they were valid
which made this super fun to debug. the ptdump code is core-mm and
pmd_table() is arm64-specific so we can't use the same trick to solve
that.
But we already support the concept of "present-invalid" for user space
entries. And even better, pmd_leaf() will return true for a leaf mapping
that is marked present-invalid. So let's just use that encoding for
present-invalid kernel mappings too. Then we can use pmd_leaf() where we
previously used pmd_sect() and everything is magically fixed.
Additionally, from inspection kernel_page_present() was broken in a
similar way, so I'm also updating that to use pmd_leaf().
The transitional page tables component was also similarly broken; it
creates a copy of the kernel page tables, making RO leaf mappings RW in
the process. It also makes invalid (but-not-none) pte mappings valid.
But it was not doing this for large leaf mappings. This could have
resulted in crashes at kexec- or hibernate-time. This code is fixed to
flip "present-invalid" mappings back to "present-valid" at all levels.
Finally, I have hardened split_pmd()/split_pud() so that if it is passed
a "present-invalid" leaf, it will maintain that property in the split
leaves, since I wasn't able to convince myself that it would only ever
be called for "present-valid" leaves.
Fixes: a166563e7ec3 ("arm64: mm: support large block mapping when rodata=full")
Cc: stable@vger.kernel.org
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit a166563e7ec37 ("arm64: mm: support large block mapping when
rodata=full") enabled the linear map to be mapped by block/cont while
still allowing granular permission changes on BBML2_NOABORT systems by
lazily splitting the live mappings. This mechanism was intended to be
usable by realm guests since they need to dynamically share dma buffers
with the host by "decrypting" them - which for Arm CCA, means marking
them as shared in the page tables.
However, it turns out that the mechanism was failing for realm guests
because realms need to share their dma buffers (via
__set_memory_enc_dec()) much earlier during boot than
split_kernel_leaf_mapping() was able to handle. The report linked below
showed that GIC's ITS was one such user. But during the investigation I
found other callsites that could not meet the
split_kernel_leaf_mapping() constraints.
The problem is that we block map the linear map based on the boot CPU
supporting BBML2_NOABORT, then check that all the other CPUs support it
too when finalizing the caps. If they don't, then we stop_machine() and
split to ptes. For safety, split_kernel_leaf_mapping() previously
wouldn't permit splitting until after the caps were finalized. That
ensured that if any secondary cpus were running that didn't support
BBML2_NOABORT, we wouldn't risk breaking them.
I've fix this problem by reducing the black-out window where we refuse
to split; there are now 2 windows. The first is from T0 until the page
allocator is inititialized. Splitting allocates memory for the page
allocator so it must be in use. The second covers the period between
starting to online the secondary cpus until the system caps are
finalized (this is a very small window).
All of the problematic callers are calling __set_memory_enc_dec() before
the secondary cpus come online, so this solves the problem. However, one
of these callers, swiotlb_update_mem_attributes(), was trying to split
before the page allocator was initialized. So I have moved this call
from arch_mm_preinit() to mem_init(), which solves the ordering issue.
I've added warnings and return an error if any attempt is made to split
in the black-out windows.
Note there are other issues which prevent booting all the way to user
space, which will be fixed in subsequent patches.
Reported-by: Jinjiang Tu <tujinjiang@huawei.com>
Closes: https://lore.kernel.org/all/0b2a4ae5-fc51-4d77-b177-b2e9db74f11d@huawei.com/
Fixes: a166563e7ec3 ("arm64: mm: support large block mapping when rodata=full")
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF.
Fixes: f2e467a48287 ("eventpoll: Fix semi-unbounded recursion")
Signed-off-by: Nicholas Carlini <nicholas@carlini.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With OS scheduling mode the driver cannot determine which context
caused the timeout, so context abort cannot be used. Instead of
queuing context_abort_work, directly trigger full device recovery
when a job timeout (TDR) occurs in OS scheduling mode.
Fixes: ade00a6c903f ("accel/ivpu: Perform engine reset instead of device recovery on TDR")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260402125526.845210-1-karol.wachowski@linux.intel.com
|
|
Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for
trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable()
only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate().
Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled,
so migration_disabled == 1 always means the task is truly
migration-disabled regardless of whether it is the current task.
The old unconditional p == current check was a false negative in this
case, potentially allowing a migration-disabled task to be dispatched to
a remote CPU and triggering scx_error in task_can_run_on_remote_rq().
Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is
enabled, where the ambiguity with the BPF prolog still exists.
Fixes: 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for trampoline.c")
Cc: stable@vger.kernel.org # v6.18+
Link: https://lore.kernel.org/lkml/20250821090609.42508-8-dongml2@chinatelecom.cn/
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Description:
- Commit b82f0759346617b2 ("drm/amd/display: Migrate DIO registers access
from hwseq to dio component") moved DIO_MEM_PWR_CTRL register access
behind the new dio abstraction layer but only created the dio object for
DCN 4.01. On all other generations (DCN 10/20/21/201/30/301/302/303/
31/314/315/316/32/321/35/351/36), the dio pointer is NULL, causing the
register write to be silently skipped.
This results in AFMT HDMI memory not being powered on during init_hw,
which can cause HDMI audio failures and display issues on affected
hardware including Renoir/Cezanne (DCN 2.1) APUs that use dcn10_init_hw.
Call dcn10_dio_construct() in each older DCN generation's resource.c
to create the dio object, following the same pattern as DCN 4.01. This
ensures the dio pointer is non-NULL and the mem_pwr_ctrl callback works
through the dio abstraction for all DCN generations.
Fixes: b82f07593466 ("drm/amd/display: Migrate DIO registers access from hwseq to dio component.")
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In scx_set_task_state(), the default case was setting the
warn flag, but then returning immediately. This is problematic
because the only purpose of the warn flag is to trigger
WARN_ONCE, but the early return prevented it from ever firing,
leaving invalid task states undetected and untraced.
To fix this, a WARN_ONCE call is now added directly in the
default case.
The fix addresses two aspects:
- Guarantees the invalid task states are properly logged
and traced.
- Provides a distinct warning message
("sched_ext: Invalid task state") specifically for
states outside the defined scx_task_state enum values,
making it easier to distinguish from other transition
warnings.
This ensures proper detection and reporting of invalid states.
Signed-off-by: Samuele Mariotti <smariotti@disroot.org>
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull smb server fix from Steve French:
- Fix out of bound write
* tag 'v7.0-rc6-ksmbd-server-fix' of git://git.samba.org/ksmbd:
ksmbd: fix OOB write in QUERY_INFO for compound requests
|
|
Simplify the code by making struct ata_scsi_transportt public, instead
of using separate variable ata_scsi_transport_template.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
There's no need for an umbrella struct, so remove it. It's also a
prerequisite for making the embedded struct scsi_transport_template
public.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
match functions
Both matching functions can make use of static struct
ata_transport_internal. This eliminates the dependency on static
variable ata_scsi_transport_template, and it allows to remove helper
to_ata_internal(). Small drawback is that a forward declaration of
both functions is needed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
This is not only cleaner to use in userspace (no need to sprintf the fd to
a string) but also allows userspace to detect that the devfd can be closed
after the fsconfig call.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
- fuse_mutex is not needed for device cloning, because fuse_dev_install()
uses cmpxcg() to set fud->fc, which prevents races between clone/mount
or clone/clone. This makes the logic simpler
- Drop fc->dev_count. This is only used to check in release if the device
is the last clone, but checking list_empty(&fc->devices) is equivalent
after removing the released device from the list. Removing the fuse_dev
before calling fuse_abort_conn() is okay, since the processing and io
lists are now empty for this device.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Both functions are helpers which are used only once. So remove them and
merge their code into libata_transport_init() and libata_transport_exit()
respectively.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Struct ata_internal is only instantiated once, in module init code.
So we can also instantiate it statically, which allows simplifying
the code.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
With the new mount API the sequence of syscalls would be:
fs_fd = fsopen("fuse", 0);
snprintf(opt, sizeof(opt), "%i", devfd);
fsconfig(fs_fd, FSCONFIG_SET_STRING, "fd", opt, 0);
/* ... */
fsconfig(fs_fd, FSCONFIG_CMD_CREATE, 0, 0, 0);
Current mount code just stores the value of devfd in the fs_context and
uses it in during FSCONFIG_CMD_CREATE, which is inelegant.
Instead grab a reference to the underlying fuse_dev, and use that during
the filesystem creation.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This will make it possible to grab the fuse_dev and subsequently release
the file that it came from.
In the above case, fud->fc will be set to FUSE_DEV_FC_DISCONNECTED to
indicate that this is no longer a functional device.
When trying to assign an fc to such a disconnected fuse_dev, the fc is set
to the disconnected state.
Use atomic operations xchg() and cmpxchg() to prevent races.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Allocate struct fuse_dev when opening the device. This means that unlike
before, ->private_data is always set to a valid pointer.
The use of USE_DEV_SYNC_INIT magic pointer for the private_data is now
replaced with a simple bool sync_init member.
If sync INIT is not set, I/O on the device returns error before mount.
Keep this behavior by checking for the ->fc member. If fud->fc is set, the
mount has succeeded. Testing this used READ_ONCE(file->private_data) and
smp_mb() to try and provide the necessary semantics. Switch this to
smp_store_release() and smp_load_acquire().
Setting fud->fc is protected by fuse_mutex, this is unchanged.
Will need this later so the /dev/fuse open file reference is not held
during FSCONFIG_CMD_CREATE.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
Check if the connection is fully initialized and connected before trying to
process a notification form the fuse server.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Use fuse_get_dev() not __fuse_get_dev() on the old fd, since in the case of
synchronous INIT the caller will want to wait for the device file to be
available for cloning, just like I/O wants to wait instead of returning an
error.
Fixes: dfb84c330794 ("fuse: allow synchronous FUSE_INIT")
Cc: stable@vger.kernel.org # v6.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Russell King says:
====================
net: stmmac: TSO fixes/cleanups
This is a more refined version of the previous patch series fixing
and cleaning up the TSO code.
I'm not sure whether "TSO" or "GSO" should be used to describe this
feature - although it primarily handles TCP, dwmac4 appears to also
be able to handle UDP.
In essence, this series adds a .ndo_features_check() method to handle
whether TSO/GSO can be used for a particular skbuff - checking which
queue the skbuff is destined for and whether that has TBS available
which precludes TSO being enabled on that channel.
I'm also adding a check that the header is smaller than 1024 bytes,
as documented in those sources which have TSO support - this is due
to the hardware buffering the header in "TSO memory" which I guess
is limited to 1KiB. I expect this test never to trigger, but if
the headers ever exceed that size, the hardware will likely fail.
While IPv4 headers are unlikely to be anywhere near this, there is
nothing in the protocol which prevents IPv6 headers up to 64KiB.
As we now have a .ndo_features_check() method, I'm moving the VLAN
insertion for TSO packets into core code by unpublishing the VLAN
insertion features when we use TSO. Another move is for checksumming,
which is required for TSO, but stmmac's requirements for offloading
checksums are more strict - and this seems to be a bug in the TSO
path.
I've changed the hardware initialisation to always enable TSO support
on the channels even if the user requests TSO/GSO to be disabled -
this fixes another issue as pointed out by Jakub in a previous review.
I'm moving the setup of the GSO features, cleaning those up, and
adding a warning if platform glue requests this to be enabled but the
hardware has no support. Hopefully this will never trigger if everyone
got the STMMAC_FLAG_TSO_EN flag correct. Also adding a check for TxPBL
value.
Finally, moving the "TSO supported" message to the new
stmmac_set_gso_features() function so keep all this TSO stuff together.
====================
Link: https://patch.msgid.link/aczHVF04LIGq_lYO@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the "TSO supported" message to stmmac_set_gso_features() so that
we group all probe-time TSO stuff in one place.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pu8-0000000Eau5-3Zne@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Documentation states that TxPBL must be >= 4 to allow TSO support, but
the driver doesn't check this. TxPBL comes from the platform glue code
or DT. Add a check with a warning if platform glue code attempts to
enable TSO support with TxPBL too low.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pu3-0000000Eatz-39ts@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a warning message if TSO is requested by the platform glue code but
the core wasn't configured for TSO.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pty-0000000Eatt-2TjZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make stmmac_set_gso_features() more readable by adding some whitespace
and getting rid of the indentation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptt-0000000Eatn-1ziK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the GSO features setup into a separate function, co-loated with
other GSO/TSO support.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pto-0000000Eath-1VDH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test in stmmac_xmit() to see whether we should pass the skbuff to
stmmac_tso_xmit() is more complex than it needs to be. This test can
be simplified by storing the mask of GSO types that we will pass, and
setting it according to the enabled features.
Note that "tso" is a mis-nomer since commit b776620651a1 ("net:
stmmac: Implement UDP Segmentation Offload"). Also note that this
commit controls both via the TSO feature. We preserve this behaviour
in this commit.
Also, this commit unconditionally accessed skb_shinfo(skb)->gso_type
for all frames, even when skb_is_gso() was false. This access is
eliminated.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptj-0000000Eatb-11zK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a check in .ndo_features_check() to indicate whether hardware
checksum can be performed on the skbuff. Where hardware checksum is
not supported - either because the channel does not support Tx COE
or the skb isn't suitable (stmmac uses a tighter test than
can_checksum_protocol()) we also need to disable TSO, which will be
done by harmonize_features() in net/core/dev.c
This fixes a bug where a channel which has COE disabled may still
receive TSO skbuffs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pte-0000000EatU-0ILt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_tso_xmit() checks whether the skbuff is trying to offload
vlan tag insertion to hardware, which from the comment in the code
appears to be buggy when the TSO feature is used.
Rather than stmmac_tso_xmit() inserting the VLAN tag, handle this
in stmmac_features_check() which will then use core net code to
handle this. See net/core/dev.c::validate_xmit_skb()
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptY-0000000EatO-42Qv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add GSO MSS checks to stmmac_features_check().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptT-0000000EatI-3feh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the STM32MP151 documentation which covers dwmac v4.2, the
hardware TSO feature can handle header lengths up to a maximum of 1023
bytes.
Add a .ndo_features_check() method implementation to check the header
length meets these requirements, otherwise fall back to software GSO.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptO-0000000EatC-39il@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will need to compute the size of the protocol headers in two places,
so move this into a separate function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptJ-0000000Eat5-2ZlA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the STM32MP25xx manual, which is dwmac v5.3, TBS (time
based scheduling) is not permitted for channels which have hardware
TSO enabled. Intel's commit 5e6038b88a57 ("net: stmmac: fix TSO and
TBS feature enabling during driver open") concurs with this, but it
is incomplete.
This commit avoids enabling TSO support on the channels which have
TBS available, which, as far as the hardware is concerned, means we
do not set the TSE bit in the DMA channel's transmit control register.
However, the net device's features apply to all queues(channels), which
means these channels may still be handed TSO skbs to transmit, and the
driver will pass them to stmmac_tso_xmit(). This will generate the
descriptors for TSO, even though the channel has the TSE bit clear.
Fix this by checking whether the queue(channel) has TBS available,
and if it does, fall back to software GSO support.
Fixes: 5e6038b88a57 ("net: stmmac: fix TSO and TBS feature enabling during driver open")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7ptE-0000000Easz-28tv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev features documentation requires that .ndo_fix_features() is
stateless: it shouldn't modify driver state. Yet, stmmac_fix_features()
does exactly that, changing whether GSO frames are processed by the
driver.
Move this code to stmmac_set_features() instead, which is the correct
place for it. We don't need to check whether TSO is supported; this
is already handled via the setup of netdev->hw_features, and we are
guaranteed that if netdev->hw_features indicates that a feature is
not supported, .ndo_set_features() won't be called with it set.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pt9-0000000East-1YAO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than configuring the channels depending on whether GSO/TSO is
currently enabled by the user, always enable if the hardware has TSO
support and the platform wants TSO to be enabled.
This avoids the channel TSO enable bit being disabled after a resume
when the user has disabled TSO features. This will cause problems when
the user re-enables TSO.
This bug goes back to commit f748be531d70 ("stmmac: support new GMAC4")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w7pt4-0000000Easn-14WL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When indx_create_allocate() fails after
attr_allocate_clusters() succeeds, run_deallocate()
frees the disk clusters but never frees the memory
allocated by run_add_entry() via kvmalloc() for the
runs_tree structure.
Fix this by adding run_close() at the out: label to
free the run.runs memory on all error paths. The
success path is unaffected as it returns 0 directly
without going through out:, transferring ownership
of the run memory to indx->alloc_run via memcpy().
Reported-by: syzbot+7adcddaeeb860e5d3f2f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7adcddaeeb860e5d3f2f
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
If a device is hot-unplugged or otherwise disappears during error handling,
ata_eh_reset() may fail with -ENODEV. Currently, the error handler will
continue to retry the reset operation up to max_tries times.
Prevent unnecessary reset retries by exiting the loop early when
ata_do_reset() returns -ENODEV.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc7).
Conflicts:
net/vmw_vsock/af_vsock.c
b18c83388874 ("vsock: initialize child_ns_mode_locked in vsock_net_init()")
0de607dc4fd8 ("vsock: add G2H fallback for CIDs not owned by H2G transport")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
ceee35e5674a ("bnxt_en: Refactor some basic ring setup and adjustment logic")
57cdfe0dc70b ("bnxt_en: Resize RSS contexts on channel count change")
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
4d56037a02bd ("wifi: iwlwifi: mld: block EMLSR during TDLS connections")
687a95d204e7 ("wifi: iwlwifi: mld: correctly set wifi generation data")
drivers/net/wireless/intel/iwlwifi/mld/scan.h
b6045c899e37 ("wifi: iwlwifi: mld: Refactor scan command handling")
ec66ec6a5a8f ("wifi: iwlwifi: mld: Fix MLO scan timing")
drivers/net/wireless/intel/iwlwifi/mvm/fw.c
078df640ef05 ("wifi: iwlwifi: mld: add support for iwl_mcc_allowed_ap_type_cmd v
2")
323156c3541e ("wifi: iwlwifi: mvm: don't send a 6E related command when not supported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kstrtou32_from_user() returns int, but the return value was stored in
a u32 variable 'val', risking sign loss. Use a dedicated int variable
to correctly handle the return code.
Fixes: 4fbfa17f9a07 ("PCI: dwc: Add debugfs based Silicon Debug support for DWC")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260401023048.4182452-1-18255117159@163.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix for a potential extent tree corruption due to an
unexpected error value.
When the search for an extent item failed, it under some circumstances
was reported as a success to the caller"
* tag 'for-7.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()
|
|
When the persistent ring buffer was first introduced, it did not make
sense to start tracing for it on the kernel command line. That's because
if there was a crash, the start of events would invalidate the events from
the previous boot that had the crash.
But now that there's a "backup" instance that can take a snapshot of the
persistent ring buffer when boot starts, it is possible to have the
persistent ring buffer start events at boot up and not lose the old events.
Update the code where the boot events start after all boot time instances
are created. This will allow the backup instance to copy the persistent
ring buffer from the previous boot, and allow the persistent ring buffer
to start tracing new events for the current boot.
reserve_mem=100M:12M:trace trace_instance=boot_mapped^@trace,sched trace_instance=backup=boot_mapped
The above will create a boot_mapped persistent ring buffer and enabled the
scheduler events. If there's a crash, a "backup" instance will be created
holding the events of the persistent ring buffer from the previous boot,
while the persistent ring buffer will once again start tracing scheduler
events of the current boot.
Now the user doesn't have to remember to start the persistent ring buffer.
It will always have the events started at each boot.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260331163924.6ccb3896@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a section about backup instance to the debugging.rst.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177502548479.1311542.7062269603547001007.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Use max() to simplify brcmstb_get_temp() and improve its readability.
Since avs_tmon_code_to_temp() returns an int, change the data type of
the local variable 't' from long to int. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260402165616.895305-3-thorsten.blum@linux.dev
|
|
Since the backup instance is readonly, after reading all data via pipe, no
data is left on the instance. Thus it can be removed safely after closing
all files. This also removes it if user resets the ring buffer manually
via 'trace' file.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177502547711.1311542.12572973358010839400.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since there is no reason to reuse the backup instance, make it readonly
(but erasable). Note that only backup instances are readonly, because
other trace instances will be empty unless it is writable. Only backup
instances have copy entries from the original.
With this change, most of the trace control files are removed from the
backup instance, including eventfs enable/filter etc.
# find /sys/kernel/tracing/instances/backup/events/ | wc -l
4093
# find /sys/kernel/tracing/instances/boot_map/events/ | wc -l
9573
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177502546939.1311542.1826814401724828930.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
On CPU hotplug, if it is the first time a trace_buffer sees a CPU, a
ring_buffer_per_cpu will be allocated and its corresponding bit toggled
in the cpumask. Many readers check this cpumask to know if they can
safely read the ring_buffer_per_cpu but they are doing so without memory
ordering and may observe the cpumask bit set while having NULL buffer
pointer.
Enforce the memory read ordering by sending an IPI to all online CPUs.
The hotplug path is a slow-path anyway and it saves us from adding read
barriers in numerous call sites.
Link: https://patch.msgid.link/20260401053659.3458961-1-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add verifier precision tracking tests for BPF atomic fetch operations.
Validate that backtrack_insn correctly propagates precision from the
fetch dst_reg to the stack slot for {fetch_add,xchg,cmpxchg} atomics.
For the first two src_reg gets the old memory value, and for the last
one r0. The fetched register is used for pointer arithmetic to trigger
backtracking. Also add coverage for fetch_{or,and,xor} flavors which
exercises the bitwise atomic fetch variants going through the same
insn->imm & BPF_FETCH check but with different imm values.
Add dual-precision regression tests for fetch_add and cmpxchg where
both the fetched value and a reread of the same stack slot are tracked
for precision. After the atomic operation, the stack slot is STACK_MISC,
so the ldx does not set INSN_F_STACK_ACCESS. These tests verify that
stack precision propagates solely through the atomic fetch's load side.
Add map-based tests for fetch_add and cmpxchg which validate that non-
stack atomic fetch completes precision tracking without falling back
to mark_all_scalars_precise. Lastly, add 32-bit variants for {fetch_add,
cmpxchg} on map values to cover the second valid atomic operand size.
# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t verifier_precision
[...]
+ /etc/rcS.d/S50-startup
./test_progs -t verifier_precision
[ 1.697105] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.700220] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.777043] tsc: Refined TSC clocksource calibration: 3407.986 MHz
[ 1.777619] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc6d7268, max_idle_ns: 440795260133 ns
[ 1.778658] clocksource: Switched to clocksource tsc
#633/1 verifier_precision/bpf_neg:OK
#633/2 verifier_precision/bpf_end_to_le:OK
#633/3 verifier_precision/bpf_end_to_be:OK
#633/4 verifier_precision/bpf_end_bswap:OK
#633/5 verifier_precision/bpf_load_acquire:OK
#633/6 verifier_precision/bpf_store_release:OK
#633/7 verifier_precision/state_loop_first_last_equal:OK
#633/8 verifier_precision/bpf_cond_op_r10:OK
#633/9 verifier_precision/bpf_cond_op_not_r10:OK
#633/10 verifier_precision/bpf_atomic_fetch_add_precision:OK
#633/11 verifier_precision/bpf_atomic_xchg_precision:OK
#633/12 verifier_precision/bpf_atomic_fetch_or_precision:OK
#633/13 verifier_precision/bpf_atomic_fetch_and_precision:OK
#633/14 verifier_precision/bpf_atomic_fetch_xor_precision:OK
#633/15 verifier_precision/bpf_atomic_cmpxchg_precision:OK
#633/16 verifier_precision/bpf_atomic_fetch_add_dual_precision:OK
#633/17 verifier_precision/bpf_atomic_cmpxchg_dual_precision:OK
#633/18 verifier_precision/bpf_atomic_fetch_add_map_precision:OK
#633/19 verifier_precision/bpf_atomic_cmpxchg_map_precision:OK
#633/20 verifier_precision/bpf_atomic_fetch_add_32bit_precision:OK
#633/21 verifier_precision/bpf_atomic_cmpxchg_32bit_precision:OK
#633/22 verifier_precision/bpf_neg_2:OK
#633/23 verifier_precision/bpf_neg_3:OK
#633/24 verifier_precision/bpf_neg_4:OK
#633/25 verifier_precision/bpf_neg_5:OK
#633 verifier_precision:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260331222020.401848-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
Fixes: 5ffa25502b5a ("bpf: Add instructions for atomic_[cmp]xchg")
Fixes: 5ca419f2864a ("bpf: Add BPF_FETCH field / create atomic_fetch_add instruction")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260331222020.401848-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
|
