| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/arm
New board, the Khadas Edge 2L. Newly added peripherals are the
OTP nvmem controllers for RK3528, RK3562 and RK3566/8, SPDIF on RK3576.
The RK3566/8 SoCs now also control the Pipe-clocks on their PCIe
controllers and UFSHC controller on RK3576 got an additional reset line.
Apart from that are of course individual board changes and fixes for
older issues that are not specific to the current development cycle.
* tag 'v7.1-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (44 commits)
arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
arm64: dts: rockchip: assign pipe clock to rk356x PCIe lanes
arm64: dts: rockchip: Add mphy reset to ufshc node
arm64: dts: rockchip: Enable OTP controller for RK3528
arm64: dts: rockchip: Enable OTP controller for RK356x
arm64: dts: rockchip: Enable OTP controller for RK3562
arm64: dts: rockchip: Enable PCIe CLKREQ# for RK3588 on Rock 5b-5bp-5t series
arm64: dts: rockchip: add SD/eMMC aliases for ArmSom Sige5
arm64: dts: rockchip: Add SPDIF nodes to RK3576 device tree
arm64: dts: rockchip: Add Khadas Edge 2L board
dt-bindings: arm: rockchip: Add Khadas Edge 2L board
arm64: dts: rockchip: Fix RK3562 EVB2 model name
arm64: dts: rockchip: Correct Joystick Axes on Gameforce Ace
arm64: dts: rockchip: Correct Fan Supply for Gameforce Ace
Revert "arm64: dts: rockchip: add SPDIF audio to Beelink A1"
arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/arm
TI K3 device tree updates for v7.1
Generic Fixes/Cleanups:
- k3-pinctrl: Cleanup alignment and reorder macros
- ti,min-output-impedance addition to all K3 board DT files
SoC Specific Features and Fixes:
AM62L:
- Add RNG node
- Support cpufreq scaling
J721S2:
- Make MAIN domain system control bus a simple-bus
- Add second DSI node
J722S:
- Add main_i2c4 device node
J7200:
- Make MAIN domain system control bus a simple-bus
Board Specific Features and Fixes:
AM642 EVM:
- Add ICSSG0 overlay for dual EMAC support
AM62:
- LP-SK: Enable internal pulls for MMC0 data pins
- SK: Enable Main UART wakeup
- phycore-som: Add 128MiB of global CMA
- Verdin: Add Zinnia board support and misc cleanup
AM62A7-SK:
- Enable Main UART wakeup
- Fix pin name in comment from M19 to N22
AM62D2 EVM:
- Enable Main UART wakeup and set wakeup-source system-states
AM62L3 EVM:
- Disable MMC1 internal pulls on data pins
- Enable Main UART wakeup and enable wkup_uart0 pins/target node
AM62P:
- SK: Disable MMC1 internal pulls on data pins and enable Main UART
wakeup
- Verdin: Add Zinnia support and misc cleanup
AM68 PHYBoard:
- Add DSI->LVDS bridge, LVDS-Display overlay and PEB-AV-15 overlay
AM69 Aquila:
- Fix DP regulator enable GPIO
J721S2 CPB:
- Add QSPI flash partition details
Removal of SMARC-sAM67 board:
- Kontron SMARC-sAM67 board support along with all bindings
are dropped as board is no longer planned for production
* tag 'ti-k3-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (47 commits)
arm64: dts: ti: k3-pinctrl: sort shift values numerically
arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment
arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
arm64: dts: ti: k3-am62p-verdin: Add Zinnia
arm64: dts: ti: k3-am62p-verdin: Add SPI_1_CS as GPIO
arm64: dts: ti: k3-am62p-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Add Zinnia
arm64: dts: ti: k3-am62-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Fix SPI_1 GPIO CS pinctrl label
dt-bindings: arm: ti: Add verdin am62/am62p zinnia board
arm64: dts: ti: k3-j721s2: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-am62-lp-sk: Enable internal pulls for MMC0 data pins
arm64: dts: ti: k3-am62l3-evm: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62p5-sk: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62d2-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
spear13xx.dtsi defines a thermal_flags property in spear thermal sensor
node which is both unused in kernel and undocumented in spear thermal
sensor's binding.
There were no dtbs_check warnings associated with this property as the
underlying spear thermal binding was not converted to DTSchema.
Most likely st,thermal-flags is a misspelling of thermal_flags in
spear13xx.dtsi. Since both st/spear1310.dtsi and st/spear1340.dtsi
define st,thermal-flags property in spear thermal sensor node, we can
safely remove this property from spear13xx.dtsi.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20260329123449.309814-3-krishnagopi487@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/arm
ARM: soc/omap updates for v7.1
* tag 'omap-for-v7.1/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v7.1
Add ECS LIVA QC710, Glymur CRD, Mahua CRD, Purwa IoT EVK, and Asus
Vivobook to the QSEECOM allow-list, to enable UEFI variable access
through uefisecapp.
Register the Gunyah watchdog device if the SCM driver finds itself
running under Gunyah. Clean up some locking using guards.
Handle possible cases where AOSS cooling state is given a non-boolean
state.
Replace LLCC per-slice activation bitmap with reference counting. Also
add SDM670 support.
Improve probe deferral handling in the OCMEM driver.
Add Milos, QCS615, Eliza, Glymur, and Mahua support to the pd-mapper.
Add support for SoCCP-based pmic-glink, as found in Glymur and
Kaanapali.
Add common QMI service ids to the main qmi headerfile, to avoid
spreading these constants in various drivers.
Add support for version 2 of SMP2P and implement the irqchip state
reading support.
Add CQ7790, SA8650P, SM7450, SM7450P, and IPQ5210 SoC and the PM7550BA
PMIC identifiers to the socinfo driver.
Add Eliza and Mahua support to the UBWC driver, introduce helpers for
drivers to read out min_acc length and other programmable values, and
disable bank swizzling for Glymur.
Simplify the logic related to allocation of NV download request in the
WCNSS control driver.
* tag 'qcom-drivers-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
dt-bindings: firmware: qcom,scm: Document ipq9650 SCM
soc: qcom: ubwc: Add support for Mahua
soc: qcom: pd-mapper: Add support for Glymur and Mahua
soc: qcom: ubwc: Add configuration Eliza SoC
soc: qcom: ubwc: Remove redundant x1e80100_data
dt-bindings: firmware: qcom,scm: document Eliza SCM Firmware Interface
soc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not available
soc: qcom: ocmem: register reasons for probe deferrals
soc: qcom: ocmem: make the core clock optional
soc: qcom: ubwc: disable bank swizzling for Glymur platform
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v7.1
* Rework the reset core to support firmware nodes, add more fine
grained locking, and use guard() helpers.
* Change the reset-gpio driver to use firmware nodes.
* Add support for the Cix Sky1 SoC reset controller.
* Add support for the RZ/G3E SoC to the reset-rzv2h-usb2phy driver and
convert it to regmap. Prepare registering a VBUS mux controller.
* Replace use of the deprecated register_restart_handler() function in
the ath79, intel-gw, lpc18xx, ma35d1, npcm, and sunplus reset drivers.
* Combine two allocations into one in the sti/reset-syscfg driver.
* Fix the reset-rzg2l-usbphy-ctrl MODULE_AUTHOR email.
* Fix the reset_control_rearm() kerneldoc comment.
The last commit is a merge of reset-fixes-for-v7.0-2 into reset/next,
to solve a merge conflict between commits a9b95ce36de4 ("reset: gpio: add a
devlink between reset-gpio and its consumer") and fbffb8c7c7bb ("reset: gpio:
fix double free in reset_add_gpio_aux_device() error path").
* tag 'reset-for-v7.1' of https://git.pengutronix.de/git/pza/linux: (35 commits)
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
reset: core: Drop unnecessary double quote
reset: rzv2h-usb2phy: Keep PHY clock enabled for entire device lifetime
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
reset: sti: kzalloc + kcalloc to kzalloc
reset: don't overwrite fwnode_reset_n_cells
reset: core: Fix indentation
reset: add Sky1 soc reset support
dt-bindings: soc: cix: document the syscon on Sky1 SoC
reset: gpio: make the driver fwnode-agnostic
reset: convert reset core to using firmware nodes
reset: convert the core API to using firmware nodes
reset: convert of_reset_control_get_count() to using firmware nodes
reset: protect struct reset_control with its own mutex
reset: protect struct reset_controller_dev with its own mutex
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/drivers
i.MX dt-bindings update for 7.1:
- New board support: Verdin iMX95, MBa93xxLA-MINI, TQMa95xxLA, S32N79
SoC/RDB, i.MX8MP audio board (version 2), SolidRun i.MX8M, TQMa8x,
GOcontroll Moduline IV/Mini, FRDM-IMX91S, Variscite DART-MX91,
i.MX93 Wireless EVK, Variscite DART-MX95.
- fsl,irqsteer add nxp,s32n79-irqsteer support.
- fsl,imx93-media-blk-ctrl add dbi-bridge.
* tag 'imx-bindings-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux:
dt-bindings: arm: fsl: add Verdin iMX95
dt-bindings: arm: fsl: add MBa93xxLA-MINI
dt-bindings: arm: add bindings for TQMa95xxLA
dt-bindings: arm: lpc: add missed lpc43xx board
dt-bindings: arm: fsl: Add NXP S32N79 SoC and RDB board
dt-bindings: interrupt-controller: fsl,irqsteer: add S32N79 support
dt-bindings: arm: fsl: Add compatible for i.MX8MP audio board (version 2)
dt-bindings: arm: fsl: Add various solidrun i.MX8M boards
dt-bindings: arm: fsl: add bindings for TQMa8x
dt-bindings: fsl: imx7ulp-smc1: Add #clock-cells property
dt-bindings: arm: fsl: Add GOcontroll Moduline IV/Mini
dt-bindings: arm: fsl: Add FRDM-IMX91S board
dt-bindings: arm: fsl: add Variscite DART-MX91 Boards
dt-bindings: arm: fsl: Add i.MX93 Wireless EVK board
dt-bindings: arm: fsl: add Variscite DART-MX95 Boards
dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v7.1-rc1
This introduces a new API for the BPMP to be pass along a specifier from
DT when getting a reference from a phandle. This is used to reference
specific instances of the PCI controller on Tegra264. The ABI header for
BPMP is updated to the latest version and BPMP APIs now use the more
intuitive ENODEV instead of the non SUSV4 ENOTSUPP error code for stub
implementations.
* tag 'tegra-for-7.1-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: bpmp: Use ENODEV instead of ENOTSUPP
firmware: tegra: bpmp: Add tegra_bpmp_get_with_id() function
soc/tegra: Update BPMP ABI header
firmware: tegra: bpmp: Rename Tegra239 to Tegra238
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v7.1-rc1
A number of fixes went into this for the PMC and CBB drivers. The PMC
driver also gains support for Tegra264 and a Kconfig symbol for the
upcoming Tegra238 is added. The various per-generation Kconfig symbols
are now also enabled by default for ARCH_TEGRA in order to reduce the
number of configuration options that need to be explicitly enabled.
* tag 'tegra-for-7.1-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
MAINTAINERS: Change email address for Thierry Reding
soc/tegra: pmc: Add IO pads for Tegra264
soc/tegra: pmc: Rename has_impl_33v_pwr flag
soc/tegra: pmc: Refactor IO pad voltage control
soc/tegra: pmc: Add Tegra264 wake events
soc/tegra: pmc: Add AOWAKE regs for Tegra264
soc/tegra: pmc: Add support for SoC specific AOWAKE offsets
soc/tegra: pmc: Remove unused AOWAKE definitions
soc/tegra: pmc: Add kerneldoc for wake-up variables
soc/tegra: pmc: Correct function names in kerneldoc
soc/tegra: pmc: Add kerneldoc for reboot notifier
soc/tegra: common: Add Tegra114 support to devm_tegra_core_dev_init_opp_table
soc/tegra: pmc: Enable core domain support for Tegra114
soc/tegra: cbb: Fix cross-fabric target timeout lookup
soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables
soc/tegra: cbb: Set ERD on resume for err interrupt
soc/tegra: cbb: Add support for CBB fabrics in Tegra238
soc/tegra: Add Tegra238 Kconfig symbol
soc/tegra: Make ARCH_TEGRA_SOC_FOO defaults for NVIDIA Tegra
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Hamoa-based Lenovo IdeaCentre Mini X provides the same UEFI variable
access through uefisecapp as other Hamoa devices, add it to the
allowlist.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260401-ideacentre-v2-3-5745fe2c764e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Lenovo IdeaCentre Mini X (Snapdragon) Desktop is a Hamoa-based
ultracompact desktop PC. It provides HDMI, DisplayPort, USB Type-C
display outputs, 5 additional USB ports, Ethernet, dual NVME slots,
headphone jack, WiFi, and Bluetooth.
Introduce a DeviceTree describing this device.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260401-ideacentre-v2-2-5745fe2c764e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Lenovo IdeaCentre Mini X (Snapdragon) Desktop is a Hamoa-based
ultracompact desktop PC. It provides HDMI, DisplayPort, USB Type-C
display outputs, 5 additional USB ports, Ethernet, dual NVME slots,
headphone jack, WiFi, and Bluetooth.
Document the compatible for this device.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260401-ideacentre-v2-1-5745fe2c764e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: tegra: Default configuration changes for v7.1-rc1
Drop the various ARCH_TEGRA_*_SOC options from the default configurations
since they are now enabled by default for ARCH_TEGRA.
* tag 'tegra-for-7.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Audio amplifier TFA9890 is present on the board.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-3-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Sets a higher rate than the default for good responsiveness of
touchscreen.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-2-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SHIFT6mq features an sdcard slot, add it.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-1-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
ARM: tegra: Default configuration changes for v7.1-rc1
Drop the various ARCH_TEGRA_*_SOC options from the default configurations
since they are now enabled by default for ARCH_TEGRA.
* tag 'tegra-for-7.1-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
soc/tegra: Make ARCH_TEGRA_SOC_FOO defaults for NVIDIA Tegra
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add clocks which need to be enabled for configuring QoS on
talos SoC.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311103548.1823044-4-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
handle_percpu_devid_irq() is a version of handle_percpu_irq() but with the
addition of a pointer to a per-CPU devid.
However, handle_percpu_irq() invokes add_interrupt_randomness(), while
handle_percpu_devid_irq() currently does not.
Add the missing add_interrupt_randomness(), as it is needed when per-CPU
interrupts with devid's are used in VMs for interrupts from the hypervisor.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260402202400.1707-2-mhklkml@zohomail.com
|
|
Enable IMX577 via CCI on Talos EVK Core Kit.
The Talos EVK board does not include a camera sensor
by default. This DTSO has enabled the Arducam 12.3MP
IMX577 Mini Camera Module on the CSI-1 interface.
CSI-1 interface using mclk2 as the MCLK source on this board.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-5-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Define pinctrl definitions to enable camera master clocks on Talos.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-4-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm Talos SoC contains single controller,
containing 2 I2C hosts.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-3-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add node for the SM6150 camera subsystem.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-2-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All the existing variants Talos boards are using Gunyah hypervisor
which means that, so far, Linux-based OS could only boot in EL1 on
those devices. However, it is possible for us to boot Linux at EL2
on these devices [1].
When running under Gunyah, the remote processor firmware IOMMU streams
are controlled by Gunyah. However, without Gunyah, the IOMMU is managed
by the consumer of this DeviceTree. Therefore, describe the firmware
streams for each remote processor.
Add a EL2-specific DT overlay and apply it to Talos IOT variant
devices to create -el2.dtb for each of them alongside "normal" dtb.
[1]
https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefi
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-talos-el2-overlay-v2-3-b6a2266532c4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the device tree for the QCS615-based Talos EVK platform. The
platform is composed of a System-on-Module following the SMARC
standard, and a Carrier Board.
The Carrier Board supports several display configurations, HDMI and
LVDS. Both configurations use the same base hardware, with the display
selection controlled by a DIP switch.
Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an
overlay that disables HDMI and adds LVDS. The DTs file talos-evk
can describe the HDMI display configurations.
According to the hardware design and vendor guidance, the WiFi PA
supplies VDD_PA_A and VDD_PA_B only need to be enabled at the same time
as asserting WLAN_EN.
On this platform, WiFi enablement is controlled via the WLAN_EN GPIO
(GPIO84), which also drives the VDD_PA_A and VDD_PA_B power enables.
Remove the VDD_PA_A and VDD_PA_B regulator nodes from the device tree
and rely on WLAN_EN to enable WiFi functionality.
Add talos-evk-usb1-peripheral.dtso overlay to enable USB0 peripheral
(EDL) mode. The base DTS will keep USB0 host-only due to hardware
routing through the EDL DIP switch, and the overlay switches the
configuration for device-mode operation.
The LVDS backlight hardware has been updated to use a simplified
design. The backlight enable signal is now permanently pulled up
to 3.3V and is no longer controlled via GPIO59.
Remove the GPIO59 based backlight configuration from the device
tree, as it is no longer routed to the LVDS interface.
The initial device tree includes support for:
- CPU and memory
- UART
- GPIOs
- Regulators
- PMIC
- Early console
- AT24MAC602 EEPROM
- MCP2515 SPI to CAN
- ADV7535 DSI-to-HDMI bridge
- DisplayPort interface
- SN65DSI84ZXHR DSI-to-LVDS bridge
- Wi-Fi/BT
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Link: https://lore.kernel.org/r/20260331060107.501561-4-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The USB PHY nodes has inconsistent labels as 'usb_1_hsphy'
and 'usb_hsphy_2' across talos.dtsi and qcs615-ride.dts.
This patch renames them to follow a consistent naming
scheme.
No functional changes, only label renaming.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331060107.501561-3-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add binding support for the Qualcomm Technologies, Inc. Talos EVK
SMARC platform based on the QCS615 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Link: https://lore.kernel.org/r/20260331060107.501561-2-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable GPU for qcs615-ride platform and provide path for zap
shader.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-4-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.
Set up GPU cooling by throttling the GPU speed when it reaches 105°C.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-3-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add gpu and rgmu nodes for Talos chipset.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-2-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Adreno GPU SMMU node for Talos chipset.
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-1-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/defconfig
arm: OMAP defconfig updates for v7.1
* tag 'omap-for-v7.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig
TI K3 defconfig updates for v7.1
Generic Fixes/Cleanups:
- Remove SENSORS_SA67MCU as the driver is dropped
Board Specific Features and Fixes:
AM69:
- Enable configurations for Toradex Aquila AM69
AM64 / AM62:
- Enable DP83TG720 PHY driver
* tag 'ti-k3-config-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable DP83TG720 PHY driver
arm64: defconfig: Enable configurations for Toradex Aquila AM69
arm64: defconfig: remove SENSORS_SA67MCU
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CONFIG_FIRMWARE_EDID=y depends on X86 or EFI_GENERIC_STUB. Neither is
true here, so drop the lines from the defconfig files.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman (TI) <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20260401082533.214103-1-tzimmermann@suse.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 defconfig updates for v7.1
Enable base drivers for booting boards based on Kaanapali, Glymur,
Eliza, SM8750, and IPQ5210 SoCs.
Enable the Milos LPASS LPI driver. Enable the Qualcomm WCD937x headphone
codec driver, used on QCM6490 boards.
Enable the QCOMTEE driver, to support the interface found in various
Qualcomm SoCs.
Enable ethernet and analog codecs used on the Arduino Ventuno Q.
Enable the Lontium LT8713sx driver, used for the Monaco EVK board.
Enable the PCI pwrctrl generic driver used in a few different
Qualcomm-based boards with USB controllers on PCI buses.
* tag 'qcom-arm64-defconfig-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable pci-pwrctrl-generic as module
arm64: defconfig: Enable Lontium LT8713sx driver
arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
arm64: defconfig: enable IPQ5210 RDP504 base configs
arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
arm64: defconfig: Enable Kaanapali clock controllers
arm64: defconfig: Enable configs for Arduino VENTUNO Q
arm64: defconfig: Enable Qualcomm Eliza basic resource providers
arm64: defconfig: Enable S5KJN1 camera sensor
arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
arm64: defconfig: Enable configs for Qualcomm Glymur SoC
arm64: defconfig: Enable SM8750 clock controllers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update the definition of SMIDR_EL1 in the sysreg definition to reflect the
information in DD0601 2025-06. This includes somewhat more generic ways of
describing the sharing of SMCUs, more information on supported priorities
and provides additional resolution for describing affinity groups.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This has both ARM and COMPILE_TEST. The latter will never get hit on a
non ARM system. Allows compilation on at least x86.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260401215718.11375-1-rosenp@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
W=1 build warns that these are set and unused. eg:
error: variable ‘mode’ set but not used
[-Werror=unused-but-set-variable]
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260401215618.11251-1-rosenp@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Hoyeon Lee says:
====================
libbpf: clarify raw-address single kprobe attach behavior
Today libbpf documents single-kprobe attach through func_name, with an
optional offset. For the PMU-based path, func_name = NULL with an
absolute address in offset already works as well, but that is not
described in the API.
This patchset clarifies this behavior. First commit fixes kprobe
and uprobe attach error handling to use direct error codes. Next adds
kprobe API comments for the raw-address form and rejects it explicitly
for legacy tracefs/debugfs kprobes. Last adds PERF and LINK selftests
for the raw-address form, and checks that LEGACY rejects it.
---
Changes in v7:
- Change selftest line wrapping and assertions
Changes in v6:
- Split the kprobe/uprobe direct error-code fix into a separate patch
Changes in v5:
- Add kprobe API docs, use -EOPNOTSUPP, and switch selftests to LIBBPF_OPTS
Changes in v4:
- Inline raw-address error formatting and remove the probe_target buffer
Changes in v3:
- Drop bpf_kprobe_opts.addr and reuse offset when func_name is NULL
- Make legacy tracefs/debugfs kprobes reject the raw-address form
- Update selftests to cover PERF/LINK raw-address attach and LEGACY reject
Changes in v2:
- Fix line wrapping and indentation
====================
Link: https://patch.msgid.link/20260401143116.185049-1-hoyeon.lee@suse.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Currently, attach_probe covers manual single-kprobe attaches by
func_name, but not the raw-address form that the PMU-based
single-kprobe path can accept.
This commit adds PERF and LINK raw-address coverage. It resolves
SYS_NANOSLEEP_KPROBE_NAME through kallsyms, passes the absolute address
in bpf_kprobe_opts.offset with func_name = NULL, and verifies that
kprobe and kretprobe are still triggered. It also verifies that LEGACY
rejects the same form.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260401143116.185049-4-hoyeon.lee@suse.com
|
|
bpf_program__attach_kprobe_opts() documents single-kprobe attach
through func_name, with an optional offset. For the PMU-based path,
func_name = NULL with an absolute address in offset already works as
well, but that is not described in the API.
This commit clarifies this existing non-legacy behavior. For PMU-based
attach, callers can use func_name = NULL with an absolute address in
offset as the raw-address form. For legacy tracefs/debugfs kprobes,
reject this form explicitly.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260401143116.185049-3-hoyeon.lee@suse.com
|
|
perf_event_open_probe() and perf_event_{k,u}probe_open_legacy() helpers
are returning negative error codes directly on failure. This commit
changes bpf_program__attach_{k,u}probe_opts() to use those return
values directly instead of re-reading possibly changed errno.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260401143116.185049-2-hoyeon.lee@suse.com
|
|
The Ethos-U NPU is only available on ARM systems, so add a hardware
dependency hint to prevent this driver from being needlessly
included in kernels built for other architectures.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20260401122323.6127a77c@endymion
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Align bpf_program__clone() with bpf_object_load_prog() by gating
BTF func/line info on FEAT_BTF_FUNC kernel support, and resolve
caller-provided prog_btf_fd before checking obj->btf so that callers
with their own BTF can use clone() even when the object has no BTF
loaded.
While at it, treat func_info and line_info fields as atomic groups
to prevent mismatches between pointer and count from different sources.
Move bpf_program__clone() to libbpf 1.8.
Fixes: 970bd2dced35 ("libbpf: Introduce bpf_program__clone()")
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260401151640.356419-1-mykyta.yatsenko5@gmail.com
|
|
Test case 'perf data type profiling tests' fails on s390 with this
error:
# ./perf mem record -- ./perf test -w code_with_type
failed: no PMU supports the memory events
# echo $?
255
#
because s390 does not support memory events at all. According to the
man page, perf annotate --code-with-type only works with memory
instructions only. As command 'perf mem record ...' is not supported
on s390, skip this test for s390.
Output before:
# ./perf test 'perf data type profiling tests'
77: perf data type profiling tests : FAILED!
Output after:
# ./perf test 'perf data type profiling tests'
77: perf data type profiling tests : Skip
Fixes: f60a5c22967b8 ("perf tests: Test annotate with data type profiling and rust")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When sorting the dso array we sometimes get a crash due to null
comparisons in comparator functions. So prevent __dsos__add from
adding null to the dso array to avoid out-of-memory related errors.
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
test__ratio_to_prev() assumed the first event in a group is the leader,
which is not the case when the event is expanded into two event groups
on hybrid PMU's with auto counter reload support. Instead, iterate over the
event group generated for each core PMU. Also update "wrong leader" test to
check that the subordinate event has the correct leader instead of checking
that it is not the group leader. Finally, do not exit immediately if a PMU
without auto counter reload support is found.
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 56be0fe5f62c ("perf record: Add auto counter reload parse and regression tests")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When perf resolves symbols from kernel module ELF files (ET_REL),
it converts symbol addresses to file offsets so that sample IPs
can be matched to the correct symbol. The conversion adjusts each
symbol's st_value:
sym->st_value -= shdr->sh_addr - shdr->sh_offset;
For vmlinux (ET_EXEC), st_value is a virtual address and sh_addr
is the section's virtual base, so subtracting sh_addr and adding
sh_offset correctly yields a file offset.
For kernel modules (ET_REL), st_value is a section-relative
offset. The module loader ignores sh_addr entirely and places
symbols at module_base + st_value. Converting to file offset
requires only adding sh_offset; subtracting sh_addr introduces an
error equal to sh_addr bytes.
When .text has sh_addr == 0 -- the historical norm for simple
modules -- both formulas produce the same result and the bug is
latent. As modules gain more metadata sections before .text (.note,
.static_call.text, etc.), the linker assigns .text a non-zero
sh_addr, exposing the defect. For example, nfsd.ko on this kernel
has sh_addr=0xa80, kvm-intel.ko has sh_addr=0x1e90.
The effect is that all .text symbols in affected modules
shift by sh_addr bytes relative to sample IPs, causing perf
report to attribute samples to incorrect, nearby symbols. This
was observed as 13% of LLC-load-miss samples misattributed
to nfsd_file_get_dio_attrs when the actual hot function was
nfsd_cache_lookup, approximately 0xa80 bytes away in the symbol
table.
Use the existing dso__rel() flag (already set for ET_REL modules)
to select the correct adjustment: add sh_offset for ET_REL,
subtract (sh_addr - sh_offset) for ET_EXEC/ET_DYN.
Fixes: 0131c4ec794a ("perf tools: Make it possible to read object code from kernel modules")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It needs to synthesize task info for the comm name. The mmap
information is only needed for callchain symbolization which is not used
by the summary mode. Also total or cgroup summary mode don't require
the task info. Let's skip the processing if possible.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Perf stat is crashing on arm64 hosts with the following issue:
# make -C tools/perf DEBUG=1
# perf stat sleep 1
perf: util/evsel.c:2034: get_group_fd: Assertion `!(!leader->core.fd)' failed.
[1] 1220794 IOT instruction (core dumped) ./perf stat
The sorting function introduced by commit a745c0831c15c ("perf stat:
Sort default events/metrics") compares events based on their individual
properties. This can cause events from different groups to be
interleaved, resulting in group members appearing before their leaders
in the sorted evlist.
When the iterator opens events in list order, a group member may be
processed before its leader has been opened.
For example, CPU_CYCLES (idx=32) with leader STALL_SLOT_BACKEND (idx=37)
could be sorted before its leader, causing the crash when CPU_CYCLES
tries to get its group fd from the not-yet-opened leader.
Fix this by comparing events based on their leader's attributes instead
of their own attributes when the events are in different groups. This
ensures all members of a group share the same sort key as their leader,
keeping groups together and guaranteeing leaders are opened before their
members.
Fixes: a745c0831c15c ("perf stat: Sort default events/metrics")
Reported-by: Denis Yaroshevskiy <dyaroshev@meta.com>
Tested-by: Dmitry Ilvokhin <d@ilvokhin.com>
Tested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
