| Age | Commit message (Collapse) | Author |
|---|
|
Add label for system clocks and add two missing clocks anaclk[1,2]. Prepare
for fixing ccm related CHECK_DTB warnings.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Remove undocumented aliases, which is not used in kernel to fix
CHECK_DTBS warnings.
arch/arm/boot/dts/nxp/mxs/imx28-tx28.dtb: aliases: 'lcdif_23bit_pins', 'lcdif_24bit_pins', 'reg_can_xcvr', 'spi_gpio', 'spi_mxs' do not match any of the regexes: '^[a-z][a-z0-9\\-]*$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/aliases.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The compatible string "edt,edt-ft5x06" is neither documented nor used.
According to drivers/input/touchscreen/edt-ft5x06.c, ft5206, ft5306 and
ft5406 are compatible.
Use "edt,edt-ft5206" instead, as the datasheet does not specify the
exact touchscreen model.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Remove the undocumented fallback compatible string "mr25h256", as the
SPI core strips the vendor prefix.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/mxs/imx28-sps1.dtb: /apb@80000000/apbh-bus@80000000/spi@80014000/flash@0: failed to match any schema with compatible: ['everspin,mr25h256', 'mr25h256']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Rename gpios-reset to reset-gpios of hx8357 node to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dtb: hx8357@0 (himax,hx8357b): Unevaluated properties are not allowed ('gpios-reset' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add the "led-" prefix to LED subnodes to fix the below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: leds (gpio-leds): 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
There are duplicate "empty" entries in the interrupt-names property of
the DMA controller. Rename them to "empty<n>" to fix below CHECK_DTBS
warnings.
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: dma-controller@80024000 (fsl,imx23-dma-apbx): interrupt-names:15: 'empty5' was expected
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Remove fsl,imx-osc26m from fixed-clock node to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/imx/imx27-apf27.dtb: osc26m (fsl,imx-osc26m): compatible: ['fsl,imx-osc26m', 'fixed-clock'] is too long
from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Rename node name uart8250 to serial to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dtb: uart8250@3,200000 (ns8250): $nodename:0: 'uart8250@3,200000' does not match '^serial(@.*)?$'
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The property interrupts use default interrupt controllers. But pass down
gpio<n> as phandle. Correct it by use interrupts-extended.
Fixes: d8cae888aa2bc ("ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Remove the redundant intermediate node between the pinmux and group nodes,
and add the missing "grp" suffix to the group node names.
Fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx27-apf27dev.dtb: iomuxc@10015000 (fsl,imx27-iomuxc): Unevaluated properties are not allowed ('imx27-apf27', 'imx27-apf27dev' were unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Rename node name iomuxc to pinmux. Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dtb: iomuxc@21c000 (fsl,imx1-iomuxc): $nodename:0: 'iomuxc@21c000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The muRata 1DX WiFi/BT chip is mounted on the DHCOM i.MX6ULL. This chip
has been discontinued and replaced by the muRata 1YN chip. The new chip
is a drop-in replacement of the old chip. To support both chips for the
i.MX6ULL DHCOR, drop the more specific compatible string and let the
driver auto-detect the chip type. Currently, there are no known quirks
that would apply only to one or the other chip.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The ov2680 only support 1 lane. Needn't additional property to descript it.
Remove it to fix below DTB_CHECK warnings:
camera@36 (ovti,ov2680): port:endpoint: 'clock-lanes', 'data-lanes' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add power supply, #sound-dai-cells and clock nodes for fsl,sgtl5000 to
fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): '#sound-dai-cells' is a required property
from schema $id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): 'clocks' is a required property
from schema $id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): 'VDDA-supply' is a required property
from schema $id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: sgtl5000@a (fsl,sgtl5000): 'VDDIO-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Replace the clock-frequency property with a fixed-clock providing the
32kHz input to the gpio-gate-clock.
Fix the following CHECK_DTBS warning:
ti-wifi-clock (gpio-gate-clock): 'clock-frequency' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The SEC2 mailbox debug output formats MBOX1 without a colon separator,
producing "MBOX10xdead" instead of "MBOX1: 0xdead". The GSP debug
message a few lines above uses the correct format.
Fixes: 5949d419c193 ("gpu: nova-core: gsp: Boot GSP")
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260331103744.605683-1-devnexen@gmail.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Since the SMB client never uses any ecb(...) algorithm from the
crypto_skcipher API, selecting CRYPTO_ECB is unnecessary.
Specifically, it has been unnecessary since commit 06deeec77a5a ("cifs:
Fix smbencrypt() to stop pointing a scatterlist at the stack") in 2016.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For `smb2_error_map_table_test` and `smb2_error_map_num`, if their types
are changed in `smb2maperror.c` but the corresponding extern declarations
in `smb2maperror_test.c` are not updated, the compiler will not report an
error. Moving them to a common header file allows the compiler to catch
type mismatches.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check whether all elements can be correctly found in the arrays.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Although the arrays are sorted at build time, verify the ordering again
when cifs.ko is loaded to avoid potential regressions introduced by
future script changes.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, map_smb_to_linux_error() uses linear searches for both
mapping_table_ERRDOS[] and mapping_table_ERRSRV[].
Refactor this by introducing search_mapping_table_ERRDOS() and
search_mapping_table_ERRSRV() that implements binary search(as the tables
are sorted).This improves lookup performance and reduces code duplication.
Also remove the sentinel entries from the mapping tables as they are no
longer needed with ARRAY_SIZE().
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Extend the `gen_smb1_mapping` script to support generating sorted POSIX
error mapping tables for both ERRDOS and ERRSRV classes at compile time.
The script parses annotations from smberr.h to generate smb1_err_dos_map.c
and smb1_err_srv_map.c, which are included as the contents of the arrays
mapping_table_ERRDOS[] and mapping_table_ERRSRV[], respectively.
This ensures that the mapping logic remains synchronized with the source
headers and prepares for faster error lookups using binary search in the
future.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Annotate SMB1 error definitions in smberr.h with their corresponding
POSIX error codes.
To facilitate automated processing and ensure consistent formatting,
existing inline comments (/* ... */) in smberr.h were first moved to
the lines preceding the #define statements.
This provides the source data for generating sorted mapping tables,
allowing the implementation of binary search for faster error mapping
lookups in later commits.
The annotations were performed based on the manual
mapping_table_ERRDOS[] and mapping_table_ERRSRV[] arrays in
smb1maperror.c using the following python script:
#!/usr/bin/env python3
import re
import os
MAP_FILE = "fs/smb/client/smb1maperror.c"
SMBERR_FILE = "fs/smb/client/smberr.h"
def get_mappings():
mappings = {}
if not os.path.exists(MAP_FILE):
return mappings
with open(MAP_FILE, "r") as f:
content = f.read()
for table in ["mapping_table_ERRDOS", "mapping_table_ERRSRV"]:
pattern = (
rf'static const struct smb_to_posix_error {table}\[\] = '
r'\{([\s\S]+?)\};'
)
match = re.search(pattern, content)
if match:
entry_pattern = (
r'\{\s*([A-Za-z0-9_]+)\s*,\s*'
r'(-[A-Z0-9_]+)\s*\}'
)
entries = re.findall(entry_pattern, match.group(1))
for name, posix in entries:
if name != "0":
mappings[name] = posix
return mappings
def format_comment(comment_lines):
"""
Formats comment lines to comply with Linux kernel coding style.
Single-line comments remain on one line.
Multi-line comments use the standard block format.
"""
raw_text = []
for line in comment_lines:
line = line.strip()
if line.startswith('/*'):
line = line[2:]
if line.endswith('*/'):
line = line[:-2]
line = line.lstrip(' *').strip()
if line:
raw_text.append(line)
if not raw_text:
return []
# If it's a single line of text, keep it simple
if len(raw_text) == 1:
return [f"/* {raw_text[0]} */"]
# Multi-line: Standard Kernel Block Comment Format
formatted = ["/*"]
for text in raw_text:
formatted.append(f" * {text}")
formatted.append(" */")
return formatted
def fix_content(content, mappings):
lines = content.splitlines()
new_lines, i = [], 0
while i < len(lines):
line = lines[i]
# Match #define with inline comment
define_re = (
r'^(\s*#define\s+([A-Za-z0-9_]+)\s+'
r'[^\s/]+)\s*/\*'
)
match = re.match(define_re, line)
if match:
prefix, name = match.group(1), match.group(2)
# Extract full comment block
comment_block = [line[line.find('/*'):].strip()]
if '*/' not in line:
while i + 1 < len(lines):
i += 1
comment_block.append(lines[i].strip())
if '*/' in lines[i]:
break
# Format and add comment
new_lines.extend(format_comment(comment_block))
# Add define with tab-separated POSIX code
new_define = prefix.rstrip()
if name in mappings:
new_define += '\t// ' + mappings[name]
new_lines.append(new_define)
else:
no_comment_re = (
r'^(\s*#define\s+([A-Za-z0-9_]+)\s+'
r'[^\s/]+)\s*$'
)
match_no_comment = re.match(no_comment_re, line)
if match_no_comment:
prefix = match_no_comment.group(1)
name = match_no_comment.group(2)
new_define = prefix.rstrip()
if name in mappings:
new_define += '\t// ' + mappings[name]
new_lines.append(new_define)
else:
new_lines.append(line)
i += 1
return '\n'.join(new_lines)
if __name__ == "__main__":
m = get_mappings()
if os.path.exists(SMBERR_FILE):
with open(SMBERR_FILE, "r") as f:
content = f.read()
fixed = fix_content(content, m)
with open(SMBERR_FILE, "w") as f:
f.write(fixed + '\n')
print(f"Successfully processed {SMBERR_FILE}")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In smb1maperror.c, ERRnetlogonNotStarted is included in the
mapping_table_ERRDOS array. However, in the smberr.h header file,
this macro was incorrectly placed under the ERRSRV (server)
error class section.
Move the macro definition to the ERRDOS section in smberr.h to maintain
consistency between the error classification in the header file and its
actual usage in the mapping tables.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check whether all elements can be correctly found in the array.
Introduce CONFIG_SMB1_KUNIT_TESTS for smb1maperror_test.ko since
smb1maperror.o is only built when CONFIG_CIFS_ALLOW_INSECURE_LEGACY
is enabled.
We are going to define 3 functions to check the search results, introduce
the macro DEFINE_CHECK_SEARCH_FUNC() to reduce duplicate code.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Although the array is sorted at build time, verify the ordering again
when cifs.ko is loaded to avoid potential regressions introduced by
future script changes.
We are going to define 3 functions to check the sort results, introduce the
macro DEFINE_CHECK_SORT_FUNC() to reduce duplicate code.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The ntstatus_to_dos_map[] table is sorted now. Replace the linear search
with binary search to improve lookup performance.
Also remove the sentinel entry as it is no longer needed with ARRAY_SIZE().
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Refactor ntstatus_to_dos() to return a pointer to the mapping entry
instead of using output parameters. This allows callers to access all
fields of the entry directly.
In map_smb_to_linux_error(), integrate the printing logic directly
to avoid redundant lookups previously performed by cifs_print_status(),
which is now removed.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The ntstatus_to_dos_map[] array now contains the NT error strings,
making the nt_errs[] array redundant.
Introduce `struct ntstatus_to_dos_err` instead of an anonymous struct.
This allows cifs_print_status() to look up error strings directly
from a single table.
Remove nterr.c, as nt_errs[] was its only functional content.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Introduce `gen_smb1_mapping` script to autogenerate the NT status to
DOS error mapping table for SMB1. This script parses nterr.h to
generate smb1_mapping_table.c, which is then directly included as
the content of the ntstatus_to_dos_map[] array at compile time.
The generated array is numerically sorted during the build process to
ensure a consistent structure, providing the necessary groundwork for
future introduction of binary search lookups.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add comments to NT_STATUS definitions in nterr.h indicating the
corresponding DOS error class and code.
To ensure formatting consistency and facilitate automated processing,
existing human-readable comments in nterr.h were first moved to the
line preceding the #define statements.
This provides the source data for generating sorted mapping tables,
allowing the implementation of binary search for faster error mapping
lookups in later commits.
The mapping data is extracted from the existing manual
ntstatus_to_dos_map[] array in smb1maperror.c using the following
python script:
#!/usr/bin/env python3
import re
import os
MAP_FILE = "fs/smb/client/smb1maperror.c"
NTERR_FILE = "fs/smb/client/nterr.h"
def move_comments(file_path):
"""
Moves existing inline comments (/* ... */ or // ...) to
the preceding line to ensure formatting consistency.
"""
if not os.path.exists(file_path):
return
with open(file_path, "r") as f:
lines = f.readlines()
new_lines = []
# Match #define statements with inline comments
re_str = r'^(\s*#define\s+[A-Za-z0-9_]+\s+.*?)\s*(/\*.*?\*/|//.*)$'
pattern = re.compile(re_str)
for line in lines:
match = pattern.match(line.rstrip())
if match:
define_part, comment_part = match.groups()
# Do not move if it's already an auto-generated mapping comment
if re.search(r'//\s*[A-Z0-9_]+\s*,\s*[A-Za-z0-9_]+', comment_part):
new_lines.append(line)
continue
indent = " " * (len(line) - len(line.lstrip()))
# Move old comment to previous line
new_lines.append(indent + comment_part + "\n")
# Keep the define part
new_lines.append(define_part.rstrip() + "\n")
else:
new_lines.append(line)
with open(file_path, "w") as f:
f.writelines(new_lines)
def annotate_nterr():
"""
Extracts DOS error mappings from smb1maperror.c and appends them
as comments to NT_STATUS defines in nterr.h, ensuring proper alignment.
"""
mapping = {}
if not os.path.exists(MAP_FILE) or not os.path.exists(NTERR_FILE):
return
# Extract mappings from the source mapping table
with open(MAP_FILE, "r") as f:
content = f.read()
# Strip comments from source to ensure robust parsing
content = re.sub(r'/\*.*?\*/', '', content, flags=re.DOTALL)
content = re.sub(r'//.*', '', content)
# Match [Class], [Code], [NT_STATUS] triplets using regex
map_re = r'([A-Z0-9_]+)\s*,\s*([A-Za-z0-9_]+)\s*,\s*(NT_STATUS_[A-Z0-9_]+)'
matches = re.findall(map_re, content)
for m in matches:
mapping[m[2]] = (m[0], m[1])
with open(NTERR_FILE, "r") as f:
lines = f.readlines()
new_lines = []
for line in lines:
stripped = line.strip()
if stripped.startswith("#define NT_STATUS_"):
# Remove any existing // comments before re-annotating
base_line = re.sub(r'\s*//.*$', '', line.rstrip())
parts = base_line.split()
if len(parts) >= 2:
name = parts[1]
# Append comment, ensuring proper alignment
if name == "NT_STATUS_OK":
line = f"{base_line}\t// SUCCESS, 0\n"
elif name in mapping:
d_class, d_code = mapping[name]
line = f"{base_line}\t// {d_class}, {d_code}\n"
else:
line = f"{base_line}\t// ERRHRD, ERRgeneral\n"
new_lines.append(line)
with open(NTERR_FILE, "w") as f:
f.writelines(new_lines)
if __name__ == "__main__":
# Step 1: Clean existing inline comments and move them to separate lines
move_comments(NTERR_FILE)
# Step 2: Annotate with DOS codes, ensuring proper DOS codes comments
annotate_nterr()
print("Successfully processed nterr.h with DOS codes comments.")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use KUNIT_ASSERT_NOT_NULL() to abort the test cases on failure.
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: SunJianHao <24031212195@stu.xidian.edu.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add cifs_dbg(VFS, ...) statements to smb3_parse_devname() to provide
explicit feedback when parsing fails. Currently, the function returns
-EINVAL silently, making it difficult to debug mount failures caused
by malformed paths or missing share names.
Signed-off-by: Fredric Cover <FredTheDude@proton.me>
Acked-by: Henrique Carvalho <[2]henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_probe_arg() accepts quoted immediate strings and passes the body
after the opening quote to __parse_imm_string(). That helper currently
computes strlen(str) and immediately dereferences str[len - 1], which
underflows when the body is empty and not closed with double-quotation.
Reject empty non-closed immediate strings before checking for the closing quote.
Link: https://lore.kernel.org/all/20260401160315.88518-1-pengpeng@iscas.ac.cn/
Fixes: a42e3c4de964 ("tracing/probe: Add immediate string parameter support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
The logic for deciding what to do after a syscall should be checking
if any of the lower byte bits are set and then checking if the reschedule
bit is set.
Currently we are loading the top word, checking if any bits are set
(which never seems to be true) and thus jumping over loading the
whole long and checking if the reschedule bit is set.
We get the thread info in two places so split that logic out in
a macro and then fix the code so that it loads the byte of the flags
we need to check, checks if anything is set and then checks if
the reschedule bit in particular is set.
Reported-by: Christoph Plattner <christoph.plattner@gmx.at>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
|
|
The split_lock_detect command line parameter is handled in sld_setup() shortly
after cpu_parse_early_param() but still before parse_early_param().
Add a dummy parsing function so that parse_early_param() doesn't later
complain about the "unknown" parameter split_lock_detect=, and pass it along
to init.
[ bp: Massage commit message. ]
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260405181807.3906-1-ronan@rjp.ie
|
|
migrate_folio_move() records the deferred split queue state from src and
replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0)
makes dst visible before it is requeued, so a concurrent rmap-removal path
can mark dst partially mapped and trip the WARN in deferred_split_folio().
Move the requeue before remove_migration_ptes() so dst is back on the
deferred split queue before it becomes visible again.
Because migration still holds dst locked at that point, teach
deferred_split_scan() to requeue a folio when folio_trylock() fails.
Otherwise a fully mapped underused folio can be dequeued by the shrinker
and silently lost from split_queue.
[ziy@nvidia.com: move the comment]
Link: https://lkml.kernel.org/r/FB71A764-0F10-4E5A-B4A0-BA4C7F138408@nvidia.com
Link: https://syzkaller.appspot.com/bug?extid=a7067a757858ac8eb085
Link: https://lkml.kernel.org/r/20260401131032.13011-1-lance.yang@linux.dev
Fixes: 8a8ca142a488 ("mm: migrate: requeue destination folio on deferred split queue")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: syzbot+a7067a757858ac8eb085@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/69ccb65b.050a0220.183828.003a.GAE@google.com/
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We are incorrectly treating lock_dropped to track both whether the lock is
currently held and whether or not the lock was ever dropped.
Update this change to account for this.
Link: https://lkml.kernel.org/r/7760c811-e100-4d40-9217-0813c28314be@lucifer.local
Fixes: 330f3758a3bc ("mm/khugepaged: unify khugepaged and madv_collapse with collapse_single_pmd()")
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Takashi Iwai (SUSE) <tiwai@suse.de>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rather than thread has_deposited through zap_huge_pmd(), make things
clearer by adding has_deposited_pgtable() with comments describing why in
each case.
[ljs@kernel.org: fix folio_put()-before-recheck issue, per Sashiko]
Link: https://lkml.kernel.org/r/0a917f80-902f-49b0-a75f-1bbaf23d7f94@lucifer.local
Link: https://lkml.kernel.org/r/f9db59ca90937e39913d50ecb4f662e2bad17bbb.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now we have pmd_to_softleaf_folio() available to us which also raises a
CONFIG_DEBUG_VM warning if unexpectedly an invalid softleaf entry, we can
now abstract folio handling altogether.
vm_normal_folio() deals with the huge zero page (which is present), as well
as PFN map/mixed map mappings in both cases returning NULL.
Otherwise, we try to obtain the softleaf folio.
This makes the logic far easier to comprehend and has it use the standard
vm_normal_folio_pmd() path for decoding of present entries.
Finally, we have to update the flushing logic to only do so if a folio is
established.
This patch also makes the 'is_present' value more accurate - because PFN
map, mixed map and zero huge pages are present, just not present and
'normal'.
[ljs@kernel.org: avoid bisection hazard]
Link: https://lkml.kernel.org/r/d0cc6161-77a4-42ba-a411-96c23c78df1b@lucifer.local
Link: https://lkml.kernel.org/r/c2be872d64ef9573b80727d9ab5446cf002f17b5.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Separate pmd_is_valid_softleaf() into separate components, then use the
pmd_is_valid_softleaf() predicate to implement pmd_to_softleaf_folio().
This returns the folio associated with a softleaf entry at PMD level. It
expects this to be valid for a PMD entry.
If CONFIG_DEBUG_VM is set, then assert on this being an invalid entry, and
either way return NULL in this case.
This lays the ground for further refactorings.
Link: https://lkml.kernel.org/r/b677592596274fa3fd701890497948e4b0e07cec.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Place the part of the logic that manipulates counters and possibly updates
the accessed bit of the folio into its own function to make zap_huge_pmd()
more readable.
Also rename flush_needed to is_present as we only require a flush for
present entries.
Additionally add comments as to why we're doing what we're doing with
respect to softleaf entries.
This also lays the ground for further refactoring.
Link: https://lkml.kernel.org/r/6c4db67952f5529da4db102a6149b9050b5dda4e.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reduce the repetition, and lay the ground for further refactorings by
keeping this variable separate.
Link: https://lkml.kernel.org/r/98104cde87e4b2aabeb16f236b8731591594457f.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These checks have been in place since 2014, I think we can safely assume
that we are in a place where we don't need these as runtime checks.
In addition there are 4 other invocations of folio_remove_rmap_pmd(), none
of which make this assertion.
If we need to add this assertion, it should be in folio_remove_rmap_pmd(),
and as a VM_WARN_ON_ONCE(), however these seem superfluous so just remove
them.
Link: https://lkml.kernel.org/r/0c4c5ab247c90f80cf44718e8124b217d6a22544.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rather than having separate logic for each case determining whether to zap
the deposited table, simply track this via a boolean.
We default this to whether the architecture requires it, and update it as
required elsewhere.
Link: https://lkml.kernel.org/r/71f576a1fbcd27a86322d12caa937bcdacf75407.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This has been around since the beginnings of the THP implementation. I
think we can safely assume that, if we have a THP folio, it will have a
head page.
Link: https://lkml.kernel.org/r/f3fa8eb4634ccb2e78209f570cc1a769a02ce93e.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Other than when we acquire the PTL, we always need to unlock the PTL, and
optionally need to flush on exit.
The code is currently very duplicated in this respect, so default
flush_needed to false, set it true in the case in which it's required,
then share the same logic for all exit paths.
This also makes flush_needed make more sense as a function-scope value (we
don't need to flush for the PFN map/mixed map, zero huge, error cases for
instance).
Link: https://lkml.kernel.org/r/6b281d8ed972dff0e89bdcbdd810c96c7ae8c9dc.1774029655.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
