| Age | Commit message (Collapse) | Author |
|---|
|
Some architecture-specific work needs to be performed between the state
management for exception entry/exit and the "real" work to handle the
exception. For example, arm64 needs to manipulate a number of exception
masking bits, with different exceptions requiring different masking.
Generally this can all be hidden in the architecture code, but for arm64
the current structure of irqentry_exit_to_kernel_mode() makes this
particularly difficult to handle in a way that is correct, maintainable,
and efficient.
The gory details are described in the thread surrounding:
https://lore.kernel.org/lkml/acPAzdtjK5w-rNqC@J2N7QTR9R3/
The summary is:
* Currently, irqentry_exit_to_kernel_mode() handles both involuntary
preemption AND state management necessary for exception return.
* When scheduling (including involuntary preemption), arm64 needs to
have all arm64-specific exceptions unmasked, though regular interrupts
must be masked.
* Prior to the state management for exception return, arm64 needs to
mask a number of arm64-specific exceptions, and perform some work with
these exceptions masked (with RCU watching, etc).
While in theory it is possible to handle this with a new arch_*() hook
called somewhere under irqentry_exit_to_kernel_mode(), this is fragile
and complicated, and doesn't match the flow used for exception return to
user mode, which has a separate 'prepare' step (where preemption can
occur) prior to the state management.
To solve this, refactor irqentry_exit_to_kernel_mode() to match the
style of {irqentry,syscall}_exit_to_user_mode(), moving preemption logic
into a new irqentry_exit_to_kernel_mode_preempt() function, and moving
state management in a new irqentry_exit_to_kernel_mode_after_preempt()
function. The existing irqentry_exit_to_kernel_mode() is left as a
caller of both of these, avoiding the need to modify existing callers.
There should be no functional change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-6-mark.rutland@arm.com
|
|
The generic irqentry code has entry/exit functions specifically for
exceptions taken from user mode, but doesn't have entry/exit functions
specifically for exceptions taken from kernel mode.
It would be helpful to have separate entry/exit functions specifically
for exceptions taken from kernel mode. This would make the structure of
the entry code more consistent, and would make it easier for
architectures to manage logic specific to exceptions taken from kernel
mode.
Move the logic specific to kernel mode out of irqentry_enter() and
irqentry_exit() into new irqentry_enter_from_kernel_mode() and
irqentry_exit_to_kernel_mode() functions. These are marked
__always_inline and placed in irq-entry-common.h, as with
irqentry_enter_from_user_mode() and irqentry_exit_to_user_mode(), so
that they can be inlined into architecture-specific wrappers. The
existing out-of-line irqentry_enter() and irqentry_exit() functions
retained as callers of the new functions.
The lockdep assertion from irqentry_exit() is moved into
irqentry_exit_to_user_mode() and irqentry_exit_to_kernel_mode(). This
was previously missing from irqentry_exit_to_user_mode() when called
directly, and any new lockdep assertion failure relating from this
change is a latent bug.
Aside from the lockdep change noted above, there should be no functional
change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-5-mark.rutland@arm.com
|
|
Subsequent patches will rework the irqentry_*() functions. The end
result (and the intermediate diffs) will be much clearer if the
prototype for the irqentry_enter() function is moved later, immediately
before the prototype of the irqentry_exit() function.
Move the prototype later.
This is purely a move; there should be no functional change as a result
of this change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-4-mark.rutland@arm.com
|
|
local_irq_enable_exit_to_user() and local_irq_disable_exit_to_user() are
never overridden by architecture code, and are always equivalent to
local_irq_enable() and local_irq_disable().
These functions were added on the assumption that arm64 would override
them to manage 'DAIF' exception masking, as described by Thomas Gleixner
in these threads:
https://lore.kernel.org/all/20190919150809.340471236@linutronix.de/
https://lore.kernel.org/all/alpine.DEB.2.21.1910240119090.1852@nanos.tec.linutronix.de/
In practice arm64 did not need to override either. Prior to moving to
the generic irqentry code, arm64's management of DAIF was reworked in
commit:
97d935faacde ("arm64: Unmask Debug + SError in do_notify_resume()")
Since that commit, arm64 only masks interrupts during the 'prepare' step
when returning to user mode, and masks other DAIF exceptions later.
Within arm64_exit_to_user_mode(), the arm64 entry code is as follows:
local_irq_disable();
exit_to_user_mode_prepare_legacy(regs);
local_daif_mask();
mte_check_tfsr_exit();
exit_to_user_mode();
Remove the unnecessary local_irq_enable_exit_to_user() and
local_irq_disable_exit_to_user() functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-3-mark.rutland@arm.com
|
|
The kerneldoc comment for irqentry_enter() refers to idtentry_exit(),
which is an accidental holdover from the x86 entry code that the generic
irqentry code was based on.
Correct this to refer to irqentry_exit().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-2-mark.rutland@arm.com
|
|
Since the PCI registers are used from both i915 display and core, move
intel_pci_config.h to include/drm/intel/pci_config.h. Drop the intel_
prefix from the name to reduce tautology.
With this, we can drop the corresponding xe display compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/5aac6c711c3f0a09fc52f322455a4a4b35f80a82.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There's an unnecessary include. Drop it.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/8323c99f379809b2973c99ebe54c21fd274d246c.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since the mchbar registers are used from both i915 display and core,
move intel_mchbar_regs.h to include/drm/intel/mchbar_regs.h. Drop the
intel_ prefix from the name to reduce tautology.
With this, we can drop the corresponding xe display compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/6c951b2c05db74ea517d52a3912986f7eb886422.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are some unnecessary includes. Remove.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7eaf98e648240e3011bfb85d0330787074c39205.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
As an exception to the rule of not including unnecessary headers from
headers, include intel_mchbar_regs.h from intel_mchbar.h. In order to
use the interfaces in intel_mchbar.h you will always have to include the
registers anyway, so the includes are in pairs everywhere. There is zero
asymmetry. Simplify.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/e44dc2daf3fc39d02c3f598c323caa3c08a54304.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
- Restore the state of the standard black-and-white and 16-color Linux
logos (no longer auto-enabled since commit 994fcd4b107d747b
("video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by
default")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/67dd5553e9289757c274d79ce1b13fca33fde25d.1772446429.git.geert@linux-m68k.org
|
|
Replace unbounded sprintf() with the safer snprintf().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260318001632.2974-3-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Replace all open-coded access to P2A and SCU registers in the device
detection with the appropriate calls to ast_moutdwm() and ast_mindwm().
Use P2A and MCR register constants. Name variables according to registers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-16-tzimmermann@suse.de
|
|
Replace all open-coded access to SCU registers in DP501 support with
the appropriate calls to ast_moutdwm() and ast_mindwm(). Use SCU register
constants. Name variables according to registers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-15-tzimmermann@suse.de
|
|
Replace all open-coded access to MCR and SCU registers in Gen6 with
the appropriate calls to ast_moutdwm() and ast_mindwm(). Use MCR and
SCU register constants. Name variables according to registers.
v2:
- also fix MCR constants
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-14-tzimmermann@suse.de
|
|
Replace all open-coded access to MCR and SCU registers in Gen4 with the
appropriate calls to ast_moutdwm() and ast_mindwm(). Use MCR and SCU
register constants. Name variables according to registers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-13-tzimmermann@suse.de
|
|
Replace all open-coded access to MCR and SCU registers in Gen2 with the
appropriate calls to ast_moutdwm() and ast_mindwm(). Use MCR and SCU
register constants. Name variables according to registers.
The values in MCR04 that control VRAM allocation do not look correct.
Leave a FIXME comment for later investigation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-12-tzimmermann@suse.de
|
|
Replace all open-coded access to MCR registers in Gen1 with the
appropriate calls to ast_moutdwm() and ast_mindwm(). Use MCR register
constants.
For the poll loop on MCR100, add ast_moutdwm_poll(). The helper polls
the register until it has been updated to the given value. Relax the
CPU while busy-waiting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-11-tzimmermann@suse.de
|
|
Struct ast_dramstruct contains a 16-bit index field that either
contains a magic value or serves as index into the P2A address
segment at 0x1e600000. This segment serves MCR and SCU registers,
which the ast_dramstruct programs. It's fragile and relies upon
the ast_post_chip_*() functions to set up the segment correctly.
Replace the 16-bit index with a full 32-bit address of the SCU
and MCR addresses. Initialize the DRAM tables with full register
constants and write them out with ast_moutdwm(). This sets the
correct segment on each write.
Drop __AST_DRAMSTRUCT_DRAM_TYPE as it simply referred to MCR04.
Use the latter for initializing the DRAM tables.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-10-tzimmermann@suse.de
|
|
Aspeed hardware allows for acceessing the SDRAM from the host. SDRAM
registers are located at the memory range at [0x80000000, 0xffffffff].
Refer to memory access with the macro AST_SDRAM(). Also add a TODO item
for the nonsensical documentation next to its caller.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-9-tzimmermann@suse.de
|
|
WDT is the Watchdog timer. WDC registers are located at the memory
range at [0x1e785000, 0x1e785fff]. There are currently up to 8
watchdog timers in the range, of which 2 are being used by AST2500.
Refer to them with macros named AST_REG_WDT<n>, where <n> is the byte
offset into the watchdog timer's memory range. Each macro also takes
the index of the watchdog timer to access. A new watchdog timer starts
at each 0x40 byte offset.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-8-tzimmermann@suse.de
|
|
A2P is the AHB-to-P Bridge. A2P registers are located at the memory
range at [0x1e720000, 0x1e73ffff]. Refer to them with constants named
AST_REG_A2P<n>, where <n> is the byte offset into the range.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-7-tzimmermann@suse.de
|
|
SCU is the System Control Unit. SCU registers are located in the memory
range at [0x1e6e2000, 0x1e6e2fff]. Refer to them with constants named
AST_REG_SCU<n>, where <n> is the byte offset into the range.
Replacing the magic values in the ast driver was done with grep and sed
as shown below
git grep -l \,\ 0x1e6e2 | xargs sed -i -e 's/, 0x1e6e2/, AST_REG_SCU/g'
git grep -l \,\ 0x1E6E2 | xargs sed -i -e 's/, 0x1E6E2/, AST_REG_SCU/g'
plus some manual fixes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-6-tzimmermann@suse.de
|
|
SDRAM registers are located in the memory range at
[0x1e160000, 0x1e160fff]. Refer to them with constants named
AST_REG_MCR<n>, where n is the byte offset into the range.
Replacing the magic values in the ast driver was done with grep
and sed as shown below
git grep -l \,\ 0x1e6e00 | xargs sed -i -e 's/, 0x1e6e00/, AST_REG_MCR/g'
git grep -l \,\ 0x1E6E00 | xargs sed -i -e 's/, 0x1E6E00/, AST_REG_MCR/g'
plus some manual fixes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-5-tzimmermann@suse.de
|
|
AHBC is the Advanced High-Speed Bus Controller. AHBC registers are
located in the memory range within [0x1e600000, 0x1e61ffff]. Refer
to them with constants named AST_REG_AHBC<n>, where <n> is the byte
offset into the range.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-4-tzimmermann@suse.de
|
|
The helpers ast_mindwm() and ast_moutdwm() access the I/O memory of
the various IP modules on the Aspeed device. This is based on the
"P-Bus to AHB Bridge" interface.
Reimplement the access function with properly defined constants and
helper macros.
- Define P2A constants for the related registers and addresses. The P2A
interface is located in the memory range at [0x00000000, 0x00010000].
- Memory access is segmented. An address' upper 16-bit select the
memory segment, the lower 16-bit select the offset within the segment.
Implement segment selection in a shared helper __ast_segsel(). Validate
that the segment hs been changes. This logic has previously been part
of __ast_moudwm() and __ast_mindwm(). Relax the CPU while busy-waiting.
- Put intra-segment reads and writes in the helpers __ast_rdseg32()
and __ast_wrseg32(). The helpers set the segment offset automatically.
- Reimplement the existing interfaces on top of these helpers.
Put the new implementation next to the other I/O helpers.
v2:
- fix typo in commit description (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-3-tzimmermann@suse.de
|
|
Fix the following W=1 kerneldoc warnings by adding the missing parameter
descriptions for @ptdev and @events in panthor_sched_report_fw_events()
and @ptdev in panthor_sched_report_mmu_fault()
Warning: drivers/gpu/drm/panthor/panthor_sched.c:1898 function parameter 'ptdev' not described in 'panthor_sched_report_fw_events'
Warning: drivers/gpu/drm/panthor/panthor_sched.c:1898 function parameter 'events' not described in 'panthor_sched_report_fw_events'
Warning: drivers/gpu/drm/panthor/panthor_sched.c:2783 function parameter 'ptdev' not described in 'panthor_sched_report_mmu_fault'
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260405192309.389039-1-yiconghui@gmail.com
|
|
Fix sparse warning:
sound/usb/qcom/qc_audio_offload.c:943:27: sparse: incorrect type in argument 2
expected unsigned int val but got snd_pcm_format_t.
Explicitly cast pcm_format to unsigned int for snd_mask_leave().
Fixes: 326bbc348298 ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604062109.Oxi8JjWW-lkp@intel.com/
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260408083311.774173-1-songxiebing@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
rust-next
Pull pin-init updates from Benno Lossin:
- Replace the 'Zeroable' impls for 'Option<NonZero*>' with impls of
'ZeroableOption' for 'NonZero*'.
- Improve feature gate handling for unstable features.
- Declutter the documentation of implementations of 'Zeroable' for
tuples.
- Replace uses of 'addr_of[_mut]!' with '&raw [mut]'.
* tag 'pin-init-v7.1' of https://github.com/Rust-for-Linux/linux:
rust: pin-init: replace `addr_of_mut!` with `&raw mut`
rust: pin-init: implement ZeroableOption for NonZero* integer types
rust: pin-init: doc: de-clutter documentation with fake-variadics
rust: pin-init: properly document let binding workaround
rust: pin-init: build: simplify use of nightly features
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull timekeeping updates from Andreas Hindborg:
- Expand the example section in the 'HrTimer' documentation.
- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.
- Add 'Delta::from_nanos()'.
This is a back merge since the pull request has a newer base -- we will
avoid that in the future.
And, given it is a back merge, it happens to resolve the "subtle" conflict
around '--remap-path-{prefix,scope}' that I discussed in linux-next [1],
plus a few other common conflicts. The result matches what we did for
next-20260407.
The actual diffstat (i.e. using a temporary merge of upstream first) is:
rust/kernel/time.rs | 32 ++++-
rust/kernel/time/hrtimer.rs | 336 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 362 insertions(+), 6 deletions(-)
Link: https://lore.kernel.org/linux-next/CANiq72kdxB=W3_CV1U44oOK3SssztPo2wLDZt6LP94TEO+Kj4g@mail.gmail.com/ [1]
* tag 'rust-timekeeping-for-v7.1' of https://github.com/Rust-for-Linux/linux:
hrtimer: add usage examples to documentation
rust: time: make ClockSource unsafe trait
rust/time: Add Delta::from_nanos()
|
|
Delta 410 uses snd_akm4xxx_reset() both around DFS changes and from
its PM callbacks, but the AK4529 case in this helper is still left
unimplemented and never drives the codec reset path.
The AK4529 datasheet documents register 09h.RSTN as an internal
timing reset. Clearing RSTN powers down the ADC and DAC blocks, but
does not reinitialize the register map. That matches the existing
ak4xxx helper model, which already keeps the desired codec state in
the software register cache.
Implement AK4529 reset handling by clearing 09h.RSTN on state == 1,
then replaying the cached register image and setting RSTN back to 1
on state == 0.
This restores cached Delta 410 mixer state after resume and gives
the AK4529 DFS-change path a real codec reset sequence.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260407-ak4529-reset-handling-v1-1-b971c18b1a32@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Backmerging to get fixes from -rc7.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
interwave still leaves both its ISA and PnP PM callbacks disabled even
though the shared GUS suspend and resume path now exists.
This board needs InterWave-specific glue around the shared GUS PM path.
The attached WSS codec has its own register image that must be saved and
restored across suspend, the InterWave-specific GF1 compatibility,
decode, MPU401, and emulation settings must be rewritten after the
shared GF1 resume path reinitializes the chip, and the probe-detected
InterWave memory layout must be restored without rerunning the
destructive DRAM/ROM detection path.
Track the optional STB TEA6330T bus at probe time, restore its cached
mixer state after resume, add resume-safe helpers for the InterWave
register and memory-configuration state, and wire both the ISA and PnP
front-ends up to the shared GUS PM helpers.
The resume path intentionally restores only the cached hardware setup.
It does not attempt to preserve sample RAM contents across suspend.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-3-8dd96c6129e9@gmail.com
|
|
The InterWave STB variant uses a TEA6330T mixer on its private
I2C bus. The mixer state is cached in software, but there is no
helper to push that register image back to hardware after system
resume.
Add a small restore helper that reapplies the cached TEA6330T
register image to the device so board drivers can restore the
external mixer state as part of their PM resume path.
Take snd_i2c_lock() around the full device lookup and restore
sequence so the bus device list traversal is also protected.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-2-8dd96c6129e9@gmail.com
|
|
Move the remaining standalone snd_tea6330t_detect() EXPORT_SYMBOL()
declaration next to its function definition so tea6330t.c follows the
usual layout.
No functional change intended.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-1-8dd96c6129e9@gmail.com
|
|
The original iuutool author is Juan Carlos Borrás - fix the spelling.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Building ARCH=um on glibc >= 2.43 fails:
arch/um/drivers/cow_user.c: error: implicit declaration of
function 'strrchr' [-Wimplicit-function-declaration]
glibc 2.43's C23 const-preserving strrchr() macro does not survive
UML's global -Dstrrchr=kernel_strrchr remap from arch/um/Makefile.
Call kernel_strrchr() directly in cow_user.c so the source no longer
depends on the -D rewrite.
Fixes: 2c51a4bc0233 ("um: fix strrchr() problems")
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260408070102.2325572-1-michael.bommarito@gmail.com
[remove unnecessary 'extern']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the probe does not check whether getting the regmap succeeded.
This can cause crash when regmap is used, if it wasn't successfully
obtained. Failing to get the regmap is unlikely, especially since this
driver is expected to be kicked by the MFD driver only after registering
the regmap - but it is still better to handle this gracefully.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e7eef0bd4075 ("regulator: bd71828-regulator.c: Fix LDON-HEAD mode")
Link: https://patch.msgid.link/5bfffee380863bcf24f3062e48094c8eb7b1342f.1775565381.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Just use the michael_mic() function from cfg80211 instead of a local
implementation of it using the crypto_shash API.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-6-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Just use the michael_mic() function from cfg80211 instead of a local
implementation of it using the crypto_shash API.
Note: when the kernel is booted with fips=1,
crypto_alloc_shash("michael_mic", 0, 0) always returned
ERR_PTR(-ENOENT), because Michael MIC is not a "FIPS allowed" algorithm.
For now, just preserve that behavior exactly, to ensure that TKIP is not
allowed to be used in FIPS mode. This logic actually seems to disable
the entire driver in FIPS mode and not just TKIP, but that was the
existing behavior. Supporting this driver in FIPS mode, if anyone
actually needs it there, should be a separate commit.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-5-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Just use the michael_mic() function from cfg80211 instead of a local
implementation of it using the crypto_shash API.
Note: when the kernel is booted with fips=1,
crypto_alloc_shash("michael_mic", 0, 0) always returned
ERR_PTR(-ENOENT), because Michael MIC is not a "FIPS allowed" algorithm.
For now, just preserve that behavior exactly, to ensure that TKIP is not
allowed to be used in FIPS mode. This logic actually seems to disable
the entire driver in FIPS mode and not just TKIP, but that was the
existing behavior. Supporting this driver in FIPS mode, if anyone
actually needs it there, should be a separate commit.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-4-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that the ipw2x00
drivers, which depend on cfg80211 but not mac80211, can also call it.
Currently these drivers have their own local implementations of
michael_mic() based on crypto_shash, which is redundant and inefficient.
By consolidating all the Michael MIC code into cfg80211, we'll be able
to remove the duplicate Michael MIC code in the crypto/ directory.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-3-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rename the driver-local michael_mic() function to libipw_michael_mic()
to prevent a name conflict with the common michael_mic() function.
Note that this code will be superseded later when libipw starts using
the common michael_mic(). This commit just prevents a bisection hazard.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-2-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.1 (PR #3)
Add ath12k support for IPQ5424.
And of course there is the usual set of cleanups and bug fixes touching
the ath10k and ath12k drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining max packet size) instead of open coding.
Note that the driver has an implicit max packet size check which is
kept.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260407151111.3187826-4-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining max packet size) instead of open coding.
Note that the driver has an implicit max packet size check which is
kept.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260407151111.3187826-3-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use the common USB helper for looking up bulk and interrupt endpoints
instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260407151111.3187826-2-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new helper function to retrieve the next action entry in flow
rule, check if the maximum number of actions is reached, bail out in
such case.
Replace existing opencoded iteration on the action array by this
helper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The trace lines are indented using PRINT("%*.s", xx, " ").
Userspace will treat this as "%*.0s" and will output no characters
when 'xx' is zero, the kernel treats it as "%*s" and will output
a single ' ' - which is probably what is intended.
Change all the formats to "%*s" removing the default precision.
This gives a single space indent when level is zero.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
