| Age | Commit message (Collapse) | Author |
|---|
|
The recent fix to add the error return value check from get_min_max*()
missed one case in build_audio_procunit() where no error value is set.
This may lead to an uninitialized variable and confuse the caller
(although this wouldn't happen practically because err is set for the
loop of num_ins at the beginning of the funciton).
Fix it by setting "err = 0" properly at the missing case, too.
Fixes: 4f55a85cd4fc ("ALSA: usb-audio: Add error checks against get_min_max*()")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/ad36dGpCBTGsyFr_@stanley.mountain
Link: https://patch.msgid.link/20260414093336.305464-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
dw_mipi_dsi_host_attach() and dw_mipi_dsi2_host_attach() call
drm_bridge_add() before pdata->host_ops->attach(). If attach fails,
the bridge stayed registered without drm_bridge_remove(), leaking the
bridge reference and leaving the device on the global bridge list.
Fixes: 90910a651123 ("drm/bridge/synopsys: dsi: add ability to have glue-specific attach and detach")
Fixes: 0d6d86253fef ("drm/bridge/synopsys: Add MIPI DSI2 host controller bridge")
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260403145208.15890-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026041134-dreamboat-buddhism-d1ec@gregkh
Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test adds a variable (ts0) to two events (sched_waking and
sched_wakeup) and uses a fully-qualified variable reference to expicitly
choose a particular one (sched_wakeup.$ts0) when calculating the wakeup
latency.
Link: https://patch.msgid.link/ce9d96aeb84b2d40bd469fe9a346e225442873b1.1776112478.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The syntax for fully-qualified variable references in histograms is
subsys.event.$var, which is parsed correctly, but not displayed correctly
when printing a histogram spec. The current code puts the $ reference at
the beginning of the fully-qualified variable name i.e. $subsys.event.var,
which is incorrect.
Before:
trigger info: hist:keys=next_comm:vals=hitcount:wakeup_lat=common_timestamp.usecs-$sched.sched_wakeup.ts0: ...
After:
trigger info: hist:keys=next_comm:vals=hitcount:wakeup_lat=common_timestamp.usecs-sched.sched_wakeup.$ts0: ...
Link: https://patch.msgid.link/5dee9a86d062a4dd68c2214f3d90ac93811e1951.1776112478.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This function gets a device_node reference via
of_graph_get_remote_port_parent() and stores it in encoder_node, but never
puts that reference. Add it.
There used to be a of_node_put(encoder_node) but it has been removed by
mistake during a rework in commit 3ea66a794fdc ("drm/arc: Inline
arcpgu_drm_hdmi_init").
Fixes: 3ea66a794fdc ("drm/arc: Inline arcpgu_drm_hdmi_init")
Cc: stable@vger.kernel.org
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260402-drm-arcgpu-fix-device-node-leak-v2-1-d773cf754ae5@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration.
Fixes: 8cf868affdc4 ("tracing: Have the reg function allow to fail")
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260413190601.21993-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
As pointed out by Smatch, the ring-buffer descriptor array page_va is
counted by nr_page_va, but the accessor ring_buffer_desc_page() allows
access off by one.
Currently, this does not cause problems, as the page ID always comes
from a trusted source. Nonetheless, ensure robustness and fix the
accessor. While at it, make the page_id unsigned.
Link: https://patch.msgid.link/20260410124527.3563970-1-vdonnefort@google.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
hist_field_name() uses a static MAX_FILTER_STR_VAL buffer for fully
qualified variable-reference names, but it currently appends into that
buffer with strcat() without rebuilding it first. As a result, repeated
calls append a new "system.event.field" name onto the previous one,
which can eventually run past the end of full_name.
Build the name with snprintf() on each call and return NULL if the fully
qualified name does not fit in MAX_FILTER_STR_VAL.
Link: https://patch.msgid.link/20260401112224.85582-1-pengpeng@iscas.ac.cn
Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
'net-bpf-fix-null-ptr-deref-in-xdp_master_redirect-for-bonding-and-add-selftest'
Jiayuan Chen says:
====================
net,bpf: fix null-ptr-deref in xdp_master_redirect() for bonding and add selftest
From: Jiayuan Chen <jiayuan.chen@shopee.com>
This series has gone through several rounds of discussion and the
maintainers hold different views on where the fix should live (in the
generic xdp_master_redirect() path vs. inside bonding). I respect all
of the suggestions, but I would like to get the crash fixed first, so
this version takes the approach of checking whether the master device
is up in xdp_master_redirect(), as suggested by Daniel Borkmann. If a
different shape is preferred later it can be done as a follow-up, but
the null-ptr-deref should not linger.
syzkaller reported a kernel panic, full decoded trace here:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
Problem Description
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter without a NULL
check. rr_tx_counter is a per-CPU counter that bonding only allocates
in bond_open() when the mode is round-robin. If the bond device was
never brought up, rr_tx_counter stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Solution
Patch 1: Fix this in the generic xdp_master_redirect() by skipping
master interception when the master device is not running. Returning
XDP_TX keeps the original XDP_TX behaviour on the receiving slave, and
avoids calling into any master ->ndo_xdp_get_xmit_slave() on a device
that has not fully initialized its XDP state. This is not specific to
bonding: any current or future master that defers XDP state allocation
to ->ndo_open() is protected.
Patch 2: Add a selftest that reproduces the above scenario.
v6: https://lore.kernel.org/netdev/20260410113726.368111-1-jiayuan.chen@linux.dev/T/#t
v5: https://lore.kernel.org/netdev/20260309030659.xxxxx-1-jiayuan.chen@linux.dev/
v4: https://lore.kernel.org/netdev/20260304074301.35482-1-jiayuan.chen@linux.dev/
v3: https://lore.kernel.org/netdev/20260228021918.141002-1-jiayuan.chen@linux.dev/T/#t
v2: https://lore.kernel.org/netdev/20260227092254.272603-1-jiayuan.chen@linux.dev/T/#t
v1: https://lore.kernel.org/netdev/20260224112545.37888-1-jiayuan.chen@linux.dev/T/#t
[1] https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
====================
Link: https://patch.msgid.link/20260411005524.201200-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a selftest that reproduces the null-ptr-deref in
bond_rr_gen_slave_id() when XDP redirect targets a bond device in
round-robin mode that was never brought up. The test verifies the fix
by ensuring no crash occurs.
Test setup:
- bond0: active-backup mode, UP, with native XDP (enables
bpf_master_redirect_enabled_key globally)
- bond1: round-robin mode, never UP
- veth1: slave of bond1, with generic XDP (XDP_TX)
- BPF_PROG_TEST_RUN with live frames triggers the redirect path
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260411005524.201200-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
Fixes: 879af96ffd72 ("net, core: Add support for XDP redirection to slave device")
Reported-by: syzbot+80e046b8da2820b6ba73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698f84c6.a70a0220.2c38d7.00cc.GAE@google.com/T/
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260411005524.201200-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The header_page tracefs metadata currently reports overwrite as an
int field with size 1. That makes parsers warn about a type and
size mismatch even though the field is only used as a one-byte flag
within commit.
Keep the shared offset with commit as-is, but report overwrite as
char so the declared type matches the hardcoded size. The signedness
is already carried separately by the emitted signed field.
Link: https://patch.msgid.link/20260406165333.46052-1-create0818@163.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216999
Signed-off-by: Cao Ruichuang <create0818@163.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fixed speaker has pop noise on Lenovo Thinkpad X11 Carbon Gen 12.
Fixes: 630fbc6e870e ("ALSA: hda/realtek - fixed speaker no sound")
Reported-and-tested-by: Jeremy Bethmont <jeremy.bethmont@gmail.com>
Closes: https://lore.kernel.org/CAC88DfsHrhyhy0Pn1O-z9egBvMYu=6NYgcvcC6KCgwh_-Ldkxg@mail.gmail.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Building perf for LoongArch fails when CONFIG_LIBDW_DWARF_UNWIND is
enabled because unwind-libdw.o is still referenced in
arch/loongarch/util/Build.
Fixes: e62fae9d9e8 ("perf unwind-libdw: Fix a cross-arch unwinding bug")
Signed-off-by: WANG Rui <r@hev.cc>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Remove the inclusion of ../filesystems/utils.h from listns_efault_test.c.
The test doesn't use any symbols from that header. Including it alongside
../pidfd/pidfd.h causes a build failure because both headers define
wait_for_pid() with conflicting linkage:
../filesystems/utils.h: extern int wait_for_pid(pid_t pid);
../pidfd/pidfd.h: static inline int wait_for_pid(pid_t pid)
All symbols the test actually uses (create_child, read_nointr,
write_nointr, sys_pidfd_send_signal) come from pidfd.h.
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/acPV19IY3Gna6Ira@sirena.org.uk
Fixes: 07d7ad46dad4 ("selftests/namespaces: test for efault")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add missing top-level kselftest TARGETS entries for empty_mntns and
fsmount_ns so that 'make kselftest' discovers and runs these tests.
Fix requires_cap_sys_admin test which always SKIPped because fsopen()
was called after enter_userns(), where CAP_SYS_ADMIN in the mount
namespace's user_ns is unavailable. Move fsopen/fsconfig before fork so
the configured fs_fd is inherited by the child, which then only needs to
call fsmount() after dropping privileges.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
CLONE_EMPTY_MNTNS is (1ULL << 37) = 0x2000000000ULL, not 0x400000000ULL.
Fixes: 5b8ffd63fbd9 ("selftests/filesystems: add clone3 tests for empty mount namespaces")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
empty_mntns.h includes ../statmount/statmount.h which provides a
4-argument statmount_alloc(mnt_id, mnt_ns_id, mask, flags), but then
redefines its own 3-argument version without the flags parameter. This
causes a build failure due to conflicting types.
Remove the duplicate definition from empty_mntns.h and update all
callers to pass 0 for the flags argument.
Fixes: 32f54f2bbccf ("selftests/filesystems: add tests for empty mount namespaces")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the local static wait_for_pid() definition from
statmount_test_ns.c as it conflicts with the extern declaration in
utils.h. The identical function is already provided by utils.c.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests")
Cc: <stable@kernel.org> # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the OPEN_TREE_NAMESPACE path vfs_open_tree() resolves a path via
filename_lookup() without holding namespace_lock. Between the lookup
and create_new_namespace() acquiring namespace_lock via
LOCK_MOUNT_EXACT_COPY() another thread can unmount the mount, setting
mnt->mnt_ns to NULL.
When create_new_namespace() then checks !mnt->mnt_ns it incorrectly
takes the swap-and-mntget path that was designed for fsmount()'s
detached mounts. This reuses a mount whose mnt_mp_list is in an
inconsistent state from the concurrent unmount, causing a general
protection fault in __umount_mnt() -> hlist_del_init(&mnt->mnt_mp_list)
during namespace teardown.
Remove the !mnt->mnt_ns special case entirely. Instead, always
duplicate the mount:
- For OPEN_TREE_NAMESPACE use __do_loopback() which will properly
clone the mount or reject it via may_copy_tree() if it was
unmounted in the race window.
- For fsmount() use clone_mnt() directly (via the new MOUNT_COPY_NEW
flag) since the mount is freshly created by vfs_create_mount() and
not in any namespace so __do_loopback()'s IS_MNT_UNBINDABLE,
may_copy_tree, and __has_locked_children checks don't apply.
Reported-by: syzbot+e4470cc28308f2081ec8@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The Acer PT316-51S (PCI SSID 1025:160e) with ALC287 codec does not
detect the headset microphone due to missing BIOS pin configuration
for pin 0x19. Apply ALC2XX_FIXUP_HEADSET_MIC to enable it.
Signed-off-by: Faye Nichols <faye.opensource@gmail.com>
Link: https://patch.msgid.link/20260413212645.117119-1-faye.opensource@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Actually verify the DDB entry for the plane we're looking
at instead of always verifying the cursor DDB.
Fixes: 7d4561722c3b ("drm/i915: Tweak plane ddb allocation tracking")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260324134843.2364-5-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
(cherry picked from commit f002f7c7439de18117a31ca84dc87a59719c3dd6)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
VESA backlight enable is possible when
BACKLIGHT_AUX_ENABLE_CAPABLE is true via AUX command or when
BACKLIGHT_PIN_ENABLE_CAPABLE is true via eDP connector pin.
Similarly, backlight brightness adjustment can be
done via AUX-based control or PWM pin-based control.
It means there can be three configurations:
1) Full AUX-based: Enable and adjustment both via AUX. We currently
support this (apart from the AUX luminance-based backlight control).
2) Hybrid: Enable via the BL_ENABLE pin, adjustment via either AUX or
PWM.
3) Fully PWM pin-based: Enable via the BL_ENABLE pin, adjustment via
PWM.
Since that only 1 is supported as of now we need to make
sure we do not try to manipulate backlight when
BACKLIGHT_AUX_ENABLE_CAPABLE is not set.
Also fix return value when condition is not fulfilled.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15907
Fixes: 0fb03890d182 ("drm/i915/backlight: Check if VESA backlight is possible")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260407030710.1440046-1-suraj.kandpal@intel.com
(cherry picked from commit 102d44b3a8fad96e94e9ccd0579986c14a1f2f75)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The suballocator algorithm tracks a hole cursor at the last allocation
and tries to allocate after it. This is optimized for fence-ordered
progress, where older allocations are expected to become reusable first.
In fence-enabled mode, that ordering assumption holds. In fence-disabled
mode, allocations may be freed in arbitrary order, so limiting allocation
to the current hole window can miss valid free space and fail allocations
despite sufficient total space.
Use DRM memory manager instead of sub-allocator to get rid of this issue
as CCS read/write operations do not use fences.
Fixes: 864690cf4dd6 ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408110145.1639937-6-satyanarayana.k.v.p@intel.com
|
|
Add a memory pool to allocate sub-ranges from a BO-backed pool
using drm_mm.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408110145.1639937-5-satyanarayana.k.v.p@intel.com
|
|
Currently, the initialization of loongarch_jump_ops does not contain an
assignment to its .free field. This causes disasm_line__free() to fall
through to ins_ops__delete() for LoongArch jump instructions.
ins_ops__delete() will free ins_operands.source.raw and
ins_operands.source.name, and these fields overlaps with
ins_operands.jump.raw_comment and ins_operands.jump.raw_func_start.
Since in loongarch_jump__parse(), these two fields are populated by
strchr()-ing the same buffer, trying to free them will lead to undefined
behavior.
This invalid free usually leads to crashes:
Process 1712902 (perf) of user 1000 dumped core.
Stack trace of thread 1712902:
#0 0x00007fffef155c58 n/a (libc.so.6 + 0x95c58)
#1 0x00007fffef0f7a94 raise (libc.so.6 + 0x37a94)
#2 0x00007fffef0dd6a8 abort (libc.so.6 + 0x1d6a8)
#3 0x00007fffef145490 n/a (libc.so.6 + 0x85490)
#4 0x00007fffef1646f4 n/a (libc.so.6 + 0xa46f4)
#5 0x00007fffef164718 n/a (libc.so.6 + 0xa4718)
#6 0x00005555583a6764 __zfree (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x106764)
#7 0x000055555854fb70 disasm_line__free (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x2afb70)
#8 0x000055555853d618 annotated_source__purge (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x29d618)
#9 0x000055555852300c __hist_entry__tui_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28300c)
#10 0x0000555558526718 do_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x286718)
#11 0x000055555852ed94 evsel__hists_browse (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28ed94)
#12 0x000055555831fdd0 cmd_report (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x7fdd0)
#13 0x000055555839b644 handle_internal_command (/home/csmantle/dist/linux-arch/tools/perf/perf + 0xfb644)
#14 0x00005555582fe6ac main (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5e6ac)
#15 0x00007fffef0ddd90 n/a (libc.so.6 + 0x1dd90)
#16 0x00007fffef0ddf0c __libc_start_main (libc.so.6 + 0x1df0c)
#17 0x00005555582fed10 _start (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5ed10)
ELF object binary architecture: LoongArch
... and it can be confirmed with Valgrind:
==1721834== Invalid free() / delete / delete[] / realloc()
==1721834== at 0x4EA9014: free (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so)
==1721834== by 0x4106287: __zfree (zalloc.c:13)
==1721834== by 0x42ADC8F: disasm_line__free (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x429B737: annotated_source__purge (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42811EB: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== Address 0x7d34303 is 35 bytes inside a block of size 62 alloc'd
==1721834== at 0x4EA59B8: malloc (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so)
==1721834== by 0x6B80B6F: strdup (strdup.c:42)
==1721834== by 0x42AD917: disasm_line__new (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42AE5A3: symbol__disassemble_objdump (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42AF0A7: symbol__disassemble (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x429B3CF: symbol__annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x429C233: symbol__annotate2 (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42804D3: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf)
This patch adds the missing free() specialization in loongarch_jump_ops,
which prevents disasm_line__free() from invoking the default cleanup
function.
Fixes: fb7fd2a14a503b9a ("perf annotate: Move raw_comment and raw_func_start fields out of 'struct ins_operands'")
Cc: stable@vger.kernel.org
Cc: WANG Rui <wangrui@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: loongarch@lists.linux.dev
Signed-off-by: Rong Bao <rong.bao@csmantle.top>
Tested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When filtering branch stack samples on user events they sample in user
land but may have come from the kernel. Aarch64 avoids leaking the
kernel address for kaslr reasons but other platforms, for now,
don't. Be more permissive in allowing kernel addresses in the source
of user branch stacks.
When filtering branch stack samples on kernel events they sample in
kernel land but may have come from user land. Avoid the target being a
user address but allow the source to be in user land. Aarch64 may not
leak the user land addresses (making them 0) but other platforms
do. As the kernel address sampling implies privelege, just allow this.
Increase the duration of the system call sampling test to make the
likelihood of sampling a system call higher (increased from 1000 to
8000 loops - a number found through experimentation on an Intel
Tigerlake laptop), also make the period of the event a prime number.
Put unneeded perf record output into a temporary file so that the test
output isn't cluttered. More clearly state which test is running and
the pass, fail or skipped result of the test.
These changes make the test on an Intel tigerlake laptop reliably pass
rather than reliably fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When adding a probe for libc's inet_pton, perf probe may create multiple
probe points (e.g., due to inlining or multiple symbol resolutions),
resulting in multiple identical event names being output (e.g.,
`probe_libc:inet_pton_1`).
The script previously used a brittle pipeline (`tail -n +2 | head -n -5`)
and an awk script to extract the event name. When multiple probes were
added, awk would output the event name multiple times, which expanded
to multiple words in bash. This broke the subsequent `perf record` and
`perf probe -d` commands, causing the test to fail with:
`Error: another command except --add is set.`
Fix this by removing the brittle `tail/head` commands and appending
`| head -n 1` to the awk extraction. This ensures that only a single,
unique event name is captured, regardless of how many probe points
are created.
Additionally, the test artificially limited the backtrace size via
`max-stack=4` and did not specify dwarf call graphs for non-s390x
architectures. In newer libc versions where `inet_pton` is nested
deeper or compiled without frame pointers, `perf script` failed to resolve
the backtrace up to `/bin/ping`. Fix this by explicitly collecting
dwarf call-graphs for all architectures and increasing `max-stack` to 8.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Turns out that displaying "RM $^" via quiet_cmd_rm can also upset the
shell and cause it to display "argument list too long".
Trying to quote $^ doesn't help.
In the end, *not* displaying the (potentially long) list of files is
probably the right thing to do for a "quiet" message, anyway. Instead,
let's display a count of how many files were removed. There is always
V=1 if more detail is required.
TEST linux/tools/perf/pmu-events/metric_test.log
RM ...634 orphan file(s)...
LD linux/tools/perf/util/perf-util-in.o
Also move the comment regarding xargs before the rule, so it doesn't
show up in the build output.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Validate the BTF entry count and individual data sizes when reading
HEADER_BPF_BTF from perf.data files to prevent excessive memory
allocation from malformed files.
Reuses the MAX_BPF_PROGS (131072) and MAX_BPF_DATA_LEN (256 MB)
limits from HEADER_BPF_PROG_INFO processing.
Cc: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_bpf_prog_info() to harden against malformed
perf.data files:
- Upper bound on BPF program count (max 131072)
- Upper bound on per-program data_len (max 256MB)
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound checks in PMU capabilities processing to harden against
malformed perf.data files:
- nr_pmu bounded to MAX_PMU_MAPPINGS (4096) in process_pmu_caps()
- nr_pmu_caps bounded to MAX_PMU_CAPS (512) in __process_pmu_caps()
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on nr_nodes in process_hybrid_topology() to
harden against malformed perf.data files (reuses MAX_PMU_MAPPINGS,
4096).
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on cache entry count in process_cache() to harden
against malformed perf.data files (max 32768).
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on nr_groups in process_group_desc() to harden
against malformed perf.data files (max 32768), and move the env
assignment after validation.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on pmu_num in process_pmu_mappings() to harden
against malformed perf.data files (max 4096).
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_mem_topology() to harden against malformed
perf.data files:
- Upper bound check on nr_nodes (reuses MAX_NUMA_NODES, 4096)
- Minimum section size check before allocating
This is particularly important here since nr is u64, making unbounded
values especially dangerous.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_numa_topology() to harden against malformed
perf.data files:
- Upper bound check on nr_nodes (max 4096)
- Minimum section size check before allocating
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_cpu_topology() to harden against malformed
perf.data files:
- Verify nr_cpus_avail was initialized (HEADER_NRCPUS processed first)
- Bounds check sibling counts (cores, threads, dies) against nr_cpus_avail
- Fix two bare 'return -1' that leaked env->cpu by using 'goto free_cpu'
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
While working on some cleanups sashiko questioned about pre-existing
issues, namely lacking sanity checks for perf.data headers, add some
with the help of Claude.
Cc: Ian Rogers <irogers@google.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
We need to do some upper limit validation, bump up the arbitrary limit
as per suggestion of Sashiko about command line wildcard expansion
ending up with more than 32768 args.
Link: https://sashiko.dev/#/patchset/20260408172846.96360-1-acme%40kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Further validate the HEADER_CPU_DOMAIN_INFO fields, this time checking
the nr_domains field.
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return.
Fixes: 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Use the native ARCH only in case it is not set, this will allow the
cross-compilation where ARCH is explicitly set.
Additionally, simplify the ARCH check to build the fcopy daemon only
for x86 and x86_64.
Fixes: 82b0945ce2c2 ("tools: hv: Add new fcopy application based on uio driver")
Reported-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Closes: https://lore.kernel.org/linux-hyperv/PR3PR09MB54119DB2FD76977C62D8DD6AB04D2@PR3PR09MB5411.eurprd09.prod.outlook.com/
Co-developed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With commit f84b21da3624 ("PCI: hv: Don't load the driver for baremetal root partition"),
the bare metal Linux root partition won't use the pci-hyperv driver, but
when a Linux VM runs on the Linux root partition, pci-hyperv's module_init
function init_hv_pci_drv() can still run, e.g. in the case of
CONFIG_PCI_HYPERV=y, even if the VMBus driver is not used in such a VM
(i.e. the hv_vmbus driver's init function returns -ENODEV due to
vmbus_root_device being NULL).
In such a Linux VM, init_hv_pci_drv() runs with a side effect: the 3
hvpci_block_ops callbacks are set to functions that depend on hv_vmbus.
Later, when the MLX driver in such a VM invokes the callbacks, e.g. in
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c:
mlx5_hv_register_invalidate(), hvpci_block_ops.reg_blk_invalidate() is
hv_register_block_invalidate() rather than a NULL function pointer, and
hv_register_block_invalidate() assumes that it can find a struct
hv_pcibus_device from pdev->bus->sysdata, which is false in such a VM.
Consequently, hv_register_block_invalidate() -> get_pcichild_wslot() ->
spin_lock_irqsave() may hang since it can be accessing an invalid
spinlock pointer.
Fix the issue by exporting hv_vmbus_exists() and using it in pci-hyperv:
hv_root_partition() is true and hv_nested is false ==>
hv_vmbus_exists() is false.
hv_root_partition() is true and hv_nested is true ==>
hv_vmbus_exists() is true.
hv_root_partition() is false ==> hv_vmbus_exists() is true.
While at it, rename vmbus_exists() to hv_vmbus_exists() to follow the
convention that all public functions have the hv_ prefix; also change
the return value's type from int to bool to make the code more readable;
also move the two pr_info() calls.
Reported-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduces various trace events and use them in the corresponding places
in the driver.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When checking for VMBus channel interrupts, current code always scans the
full SynIC receive interrupt bit array to get the relid of the
interrupting channels. The array has HV_EVENT_FLAGS_COUNT (2048) bits.
But VMs rarely have more than 100 channels, and the relid is typically
a small integer that is densely assigned by the Hyper-V host. It's
wasteful to scan 2048 bits when it is highly unlikely that anything will
be found past bit 100. The waste is double with Confidential VMBus because
there are two receive interrupt arrays that must be scanned: one for the
hypervisor SynIC and one for the paravisor SynIC.
Improve the scanning by tracking the largest relid that has been offered
by the Hyper-V host. Then when checking for VMBus channel interrupts, only
scan up to this high water mark.
When channels are rescinded, it's not worth the complexity to recalculate
the high water mark. Hyper-V tends to reuse the rescinded relids for any
new channels that are subsequently added, and the performance benefit of
exactly tracking the high water mark would be minimal.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Roman Kisel <vdso@mailbox.org>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"For this release we have an extension of the pwrseq-pcie-m2 driver
with support for PCIe M.2 Key E connectors.
The rest of the commits fulfill a supporting role: document the
hardware in DT bindings, provide required serdev helpers (this has
been provided in an immutable branch to Rob Herring so you may see it
in his PR as well) and is followed up by some Kconfig fixes from Arnd.
Summary:
- add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2
- describe PCIe M.2 Mechanical Key E connectors in DT bindings
- add serdev helpers for looking up devices by OF nodes
- minor serdev core rework to enable support for PCIe M.2 Key E
connectors"
* tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: add SERIAL_DEV_BUS dependency
power: sequencing: pcie-m2: enforce PCI and OF dependencies
power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector
dt-bindings: serial: Document the graph port
serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used
serdev: Add an API to find the serdev controller associated with the devicetree node
serdev: Convert to_serdev_*() helpers to macros and use container_of_const()
|
