| Age | Commit message (Collapse) | Author |
|---|
|
Outside of the EFI tpm code, the TPM_MEMREMAP()/TPM_MEMUNMAP functions are
defined as trivial macros, leading to the mapping_size variable ending
up unused:
In file included from drivers/char/tpm/tpm-sysfs.c:16:
In file included from drivers/char/tpm/tpm.h:28:
include/linux/tpm_eventlog.h:167:6: error: variable 'mapping_size' set but not used [-Werror,-Wunused-but-set-variable]
167 | int mapping_size;
Turn the stubs into inline functions to avoid this warning.
Cc: stable@vger.kernel.org # v5.3+
Fixes: c46f3405692d ("tpm: Reserve the TPM final events table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_dev_release() uses plain kfree() to free chip->auth, which contains
sensitive cryptographic material including HMAC session keys, nonces,
and passphrase data (struct tpm2_auth).
Every other code path that frees this structure uses kfree_sensitive()
to zero the memory before releasing it: both tpm2_end_auth_session()
and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path
is the only one that does not, leaving key material in freed slab
memory until it is eventually overwritten.
Use kfree_sensitive() for consistency with the rest of the driver and
to ensure session keys are scrubbed during device teardown.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_read_public() calls tpm_buf_init() but fails to call
tpm_buf_destroy() on two exit paths, leaking a page allocation:
1. When name_size() returns an error (unrecognized hash algorithm),
the function returns directly without destroying the buffer.
2. On the success path, the buffer is never destroyed before
returning.
All other error paths in the function correctly call
tpm_buf_destroy() before returning.
Fix both by adding the missing tpm_buf_destroy() calls.
Cc: stable@vger.kernel.org # v6.19+
Fixes: bda1cbf73c6e ("tpm2-sessions: Fix tpm2_read_public range checks")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
When tpm_buf_fill_hmac_session() fails inside the do-while loop in
tpm2_get_random(), the function returns directly after destroying the
buffer, without ending the auth session via tpm2_end_auth_session().
This leaks the TPM auth session resource. All other error paths within
the loop correctly reach the 'out' label which calls both
tpm_buf_destroy() and tpm2_end_auth_session().
Fix this by replacing the early return with a goto to the existing 'out'
label, which already handles both cleanup operations. The redundant
tpm_buf_destroy() call is removed since 'out' takes care of it.
Cc: stable@vger.kernel.org # v6.19+
Fixes: 6e9722e9a7bf ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Multiple block comments in tpm_i2c_atmel.c placed the closing '*/' on the
same line as the comment text. This violates the kernel's preferred
comment style, which requires the closing delimiter to appear on its
line.
Fix the formatting to improve readability and resolve checkpatch
warnings.
Signed-off-by: Ethan Luna <trunixcodes@zohomail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the tpm_crb ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
File-scope 'tcpci_pm_ops' is not used outside of this unit and is not
modified anywhere, so make it static const to silence sparse warning:
tcpci.c:1002:1: warning: symbol 'tcpci_pm_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The function kgdb_wait() was folded into the static function
kgdb_cpu_enter() by commit 62fae312197a ("kgdb: eliminate
kgdb_wait(), all cpus enter the same way"). Update the four stale
references accordingly:
- include/linux/kgdb.h and arch/x86/kernel/kgdb.c: the
kgdb_roundup_cpus() kdoc describes what other CPUs are rounded up
to call. Because kgdb_cpu_enter() is static, the correct public
entry point is kgdb_handle_exception(); also fix a pre-existing
grammar error ("get them be" -> "get them into") and reflow the
text.
- kernel/debug/debug_core.c: replace with the generic description
"the debug trap handler", since the actual entry path is
architecture-specific.
- kernel/debug/gdbstub.c: kgdb_cpu_enter() is correct here (it
describes internal state, not a call target); add the missing
parentheses.
Suggested-by: Daniel Thompson <daniel@riscstar.com>
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix IPsec ESN regression in authencesn
- Fix hmac setkey failure in eip93
- Guard against IV changing in algif_aead
- Fix async completion handling in krb5enc
- Fix fallback async completion in acomp
- Fix handling of MAY_BACKLOG requests in pcrypt
- Fix issues with firmware-returned values in ccp
* tag 'v7.1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: krb5enc - fix async decrypt skipping hash verification
crypto: algif_aead - snapshot IV for async AEAD requests
crypto: acomp - fix wrong pointer stored by acomp_save_req()
crypto: ccp - copy IV using skcipher ivsize
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
crypto: pcrypt - Fix handling of MAY_BACKLOG requests
crypto: sa2ul - Fix AEAD fallback algorithm names
crypto: authencesn - Fix src offset when decrypting in-place
crypto: eip93 - fix hmac setkey algo selection
|
|
Commit 2c67dc457bc6 ("tracing: fprobe: optimization for entry only case")
introduced a different ftrace_ops for entry-only fprobes.
However, when unregistering an fprobe, the kernel only checks if another
fprobe exists at the same address, without checking which type of fprobe
it is.
If different fprobes are registered at the same address, the same address
will be registered in both fgraph_ops and ftrace_ops, but only one of
them will be deleted when unregistering. (the one removed first will not
be deleted from the ops).
This results in junk entries remaining in either fgraph_ops or ftrace_ops.
For example:
=======
cd /sys/kernel/tracing
# 'Add entry and exit events on the same place'
echo 'f:event1 vfs_read' >> dynamic_events
echo 'f:event2 vfs_read%return' >> dynamic_events
# 'Enable both of them'
echo 1 > events/fprobes/enable
cat enabled_functions
vfs_read (2) ->arch_ftrace_ops_list_func+0x0/0x210
# 'Disable and remove exit event'
echo 0 > events/fprobes/event2/enable
echo -:event2 >> dynamic_events
# 'Disable and remove all events'
echo 0 > events/fprobes/enable
echo > dynamic_events
# 'Add another event'
echo 'f:event3 vfs_open%return' > dynamic_events
cat dynamic_events
f:fprobes/event3 vfs_open%return
echo 1 > events/fprobes/enable
cat enabled_functions
vfs_open (1) tramp: 0xffffffffa0001000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 subops: {ent:fprobe_fgraph_entry+0x0/0x620 ret:fprobe_return+0x0/0x150}
vfs_read (1) tramp: 0xffffffffa0001000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 subops: {ent:fprobe_fgraph_entry+0x0/0x620 ret:fprobe_return+0x0/0x150}
=======
As you can see, an entry for the vfs_read remains.
To fix this issue, when unregistering, the kernel should also check if
there is the same type of fprobes still exist at the same address, and
if not, delete its entry from either fgraph_ops or ftrace_ops.
Link: https://lore.kernel.org/all/177669367993.132053.10553046138528674802.stgit@mhiramat.tok.corp.google.com/
Fixes: 2c67dc457bc6 ("tracing: fprobe: optimization for entry only case")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
fprobe_remove_node_in_module() is called under RCU read locked, but
this invokes kcalloc() if there are more than 8 fprobes installed
on the module. Sashiko warns it because kcalloc() can sleep [1].
[1] https://sashiko.dev/#/patchset/177552432201.853249.5125045538812833325.stgit%40mhiramat.tok.corp.google.com
To fix this issue, expand the batch size to 128 and do not expand
the fprobe_addr_list, but just cancel walking on fprobe_ip_table,
update fgraph/ftrace_ops and retry the loop again.
Link: https://lore.kernel.org/all/177669367206.132053.1493637946869032744.stgit@mhiramat.tok.corp.google.com/
Fixes: 0de4c70d04a4 ("tracing: fprobe: use rhltable for fprobe_ip_table")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Based on the comment information, the description within the
`ptp_sts_word_post` section should be changed to "See @ptp_sts_word_pre".
Signed-off-by: Dewei Meng <mengdewei@cqsoftware.com.cn>
Link: https://patch.msgid.link/20260421025808.6572-1-mengdewei@cqsoftware.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When register_fprobe_ips() fails, it tries to remove a list of
fprobe_hash_node from fprobe_ip_table, but it missed to remove
fprobe itself from fprobe_table. Moreover, when removing
the fprobe_hash_node which is added to rhltable once, it must
use kfree_rcu() after removing from rhltable.
To fix these issues, this reuses unregister_fprobe() internal
code to rollback the half-way registered fprobe.
Link: https://lore.kernel.org/all/177669366417.132053.17874946321744910456.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
unregister_fprobe() can fail under memory pressure because of memory
allocation failure, but this maybe called from module unloading, and
usually there is no way to retry it. Moreover. trace_fprobe does not
check the return value.
To fix this problem, unregister fprobe and fprobe_hash_node even if
working memory allocation fails.
Anyway, if the last fprobe is removed, the filter will be freed.
Link: https://lore.kernel.org/all/177669365629.132053.8433032896213721288.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Reject registration of a registered fprobe which is on the fprobe
hash table before initializing fprobe.
The add_fprobe_hash() checks this re-register fprobe, but since
fprobe_init() clears hlist_array field, it is too late to check it.
It has to check the re-registration before touncing fprobe.
Link: https://lore.kernel.org/all/177669364845.132053.18375367916162315835.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache busy loop updates from Al Viro:
"Fix livelocks in shrink_dcache_tree()
If shrink_dcache_tree() finds a dentry in the middle of being killed
by another thread, it has to wait until the victim finishes dying,
gets detached from the tree and ceases to pin its parent.
The way we used to deal with that amounted to busy-wait;
unfortunately, it's not just inefficient but can lead to reliably
reproducible hard livelocks.
Solved by having shrink_dentry_tree() attach a completion to such
dentry, with dentry_unlist() calling complete() on all objects
attached to it. With a bit of care it can be done without growing
struct dentry or adding overhead in normal case"
* tag 'pull-dcache-busy-wait' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
get rid of busy-waiting in shrink_dcache_tree()
dcache.c: more idiomatic "positives are not allowed" sanity checks
struct dentry: make ->d_u anonymous
for_each_alias(): helper macro for iterating through dentries of given inode
|
|
It is possible that both dev->master and file_priv->master are NULL when
passed to drm_master_release, which would result in dev being passed to
drm_drop_master (as NULL == NULL here). This would result in a NULL
pointer dereference when passing dev->master to drm_master_put in
drm_drop_master.
Only call drm_drop_master if dev->master exists. Also, make sure the
original calling requirement is maintained (dev->master ==
file_priv->master).
This fixes a static analysis issue.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Acked-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patch.msgid.link/20260416210047.3904106-1-jonathan.cavitt@intel.com
|
|
These pinctrl nodes are required by the eMMC, SD card and SDIO drivers
to configure pin muxing at runtime.
- eMMC: control, 4-bit/8-bit data, data strobe and clock gate pins
- SD card: data, clock, command and clock gate pins
- SDIO: data, clock, command and clock gate pins
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260326-add-emmc-t7-vim4-v5-1-d3f182b48e9d@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add the gpio-keys-polled node to support the Power button found on the
Khadas VIM1S board. The button is connected to the GPIOD_8 pin.
Use polled mode instead of gpio-keys because the GPIO interrupt
controller support for Meson S4 SoC is not yet available upstream.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260228063750.701887-5-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Khadas VIM1S board features a white LED connected to the PWM_G
controller (PWM channel 0).
Enable the PWM_G controller and add the pwm-leds node to support
using this LED as a heartbeat indicator.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260228063750.701887-4-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Khadas VIM1S board uses the Ampak AP6256 Wi-Fi/Bluetooth module.
The Bluetooth controller is connected via UART_A and requires the
external 32k clock (LPO).
Enable the UART_A node and add the bluetooth child node to support it.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260228063750.701887-3-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add the UART_A node and its related pinctrl definitions to the
Meson S4 SoC dtsi.
The pinctrl groups are split into basic tx/rx and flow control (cts/rts)
to allow board-level flexibility.
This interface is typically used for Bluetooth communication on
boards like the Khadas VIM1S.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260228063750.701887-2-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Phicomm N1 uses a CY43455 (BCM43438) module with its Bluetooth
interface connected to uart_A.
Add the required device tree node to enable proper functionality.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260213073810.552341-1-jerrysteve1101@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Correct the interrupt number assigned to the Realtek PHY in the p230
following the same logic as commit 3106507e1004 ("ARM64: dts: meson-gxm:
fix q200 interrupt number"),as reported in [PATCH 0/2] Ethernet PHY
interrupt improvements [1].
[1] https://lore.kernel.org/all/20171202214037.17017-1-martin.blumenstingl@googlemail.com/
Fixes: b94d22d94ad2 ("ARM64: dts: meson-gx: add external PHY interrupt on some platforms")
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260330145111.115318-1-jerrysteve1101@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add missing L1 data and instruction cache parameters to the CPU node 0
for the Cortex-A53 caches on the Meson AXG SoC.
Fixes: 3b6ad2a43367 ("arm64: dts: amlogic: Add cache information to the Amlogic AXG SoCS")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://patch.msgid.link/20260219103548.18392-1-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Update the model property to "Khadas VIM4" to match the official
product branding and maintain consistency with other Khadas boards
(e.g., VIM1, VIM2, VIM3) in the kernel tree.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260306030756.2421841-1-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
This patch aims to fix the GIC register ranges for Amlogic T7 SoC family.
- Context
Kernel log shows a warning about GIC
[ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
Using cat /proc/interrupts command shows GIC as GIC-0
Adding some peripherals sometimes causes hangs on interrupts.
- According to the GIC-400 ARM doc, the memory map is like:
0x1000-0x1FFF Distributor
0x2000-0x3FFF CPU interfaces
0x4000-0x5FFF Virtual interface control block
0x6000-0x7FFF Virtual CPU interfaces
- Identify GIC model from distributor register
Offset | Name | Type | Reset
0x008 | GICD_IIDR | RO | 0x0200143B
kvim4# md.l 0xFFF01008 1
fff01008: 0200143b
- Identify CPU interface from CPU interface register
Offset | Name | Type | Reset
0x00FC | GICC_IIDR | RO | 0x0202143B
kvim4# md.l 0xFFF020FC 1
fff020fc: 0202143b
- Virtual interface control register check
Offset | Name | Type | Reset
0x004 | GICH_VTR | RO | 0x90000003
kvim4# md.l 0xFFF04004 1
fff04004: 90000003
- Virtual CPU interfaces check
Offset | Name | Type | Reset
0x00FC | GICV_IIDR | RO | 0x0202143B
kvim4# md.l 0xFFF060FC 1
fff060fc: 0202143b
- After this patch there is no warning anymore.
GICv2 is correctly identified.
[ 0.000000] GIC: Using split EOI/Deactivate mode
Using cat /proc/interrupts command shows GIC as GICv2
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260305-fix-amlt7-gic-dts-v1-1-5944415c74bf@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Khadas VIM4 features 8GB of LPDDR4X RAM. The previous memory node
mapped a single incorrect region. This caused the kernel to map MMIO
and secure firmware (ATF/TrustZone) memory holes as standard RAM,
leading to an Asynchronous SError Interrupt during early boot
(paging_init) when the kernel attempted to clear those pages.
Fix this by splitting the 8GB memory layout into three separate
regions to properly avoid the memory holes (e.g., 0xe0000000 -
0xffffffff):
- 3.5GB @ 0x000000000
- 3.5GB @ 0x100000000
- 1.0GB @ 0x200000000
Signed-off-by: Nick Xie <nick@khadas.com>
Suggested-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Link: https://patch.msgid.link/20260319023446.3422695-1-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Unlike older GIC variants, the GICv3 DT bindings do not support
specifying a CPU mask in PPI interrupt specifiers. Drop the masks.
While at it, replace the magic number for IRQ_TYPE_LEVEL_HIGH by its
symbolic definition.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/f9c6eddebebcd2e128edd2dbc51706e23589f9e8.1772643434.git.geert+renesas@glider.be
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
ath12k_ahb_config_ext_irq() iterates over ATH12K_EXT_IRQ_NUM_MAX (16)
entries while checking TX ring masks, but the tcl_to_wbm_rbm_map array
contains only DP_TCL_NUM_RING_MAX (4) valid elements.
When the iterator (j) is greater than or equal to DP_TCL_NUM_RING_MAX,
it accesses tcl_to_wbm_rbm_map[j] out of bounds. This results in
reading uninitialized memory for wbm_ring_num, causing the driver to
evaluate incorrect BIT() conditions and request IRQs for rings that do
not have an assigned interrupt line or device tree entry.
This leads to request_irq() failures with -ENXIO or -EINVAL during
ath12k AHB probe.
Fix this by splitting the loop into two separate loops: one iterating
over DP_TCL_NUM_RING_MAX for TX ring, and another iterating over
ATH12K_EXT_IRQ_NUM_MAX for remaining IRQ entries.
Also add a bounds check for num_irq.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Fixes: 6cee30f0da75 ("wifi: ath12k: add AHB driver support for IPQ5332")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260414062829.2371761-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Macro HAL_RX_EHT_SIG_OFDMA_EB2_MCS unused, so remove it.
No functional change, compile Tested only.
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260416-hal_rx_eht_sig_ofdma_eb2_mcs-v1-1-c44a3177deab@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix dualpi2_change() to correctly enforce updated limit and memlimit
values after a configuration change of the dualpi2 qdisc.
Before this patch, dualpi2_change() always attempted to dequeue packets
via the root qdisc (C-queue) when reducing backlog or memory usage, and
unconditionally assumed that a valid skb will be returned. When traffic
classification results in packets being queued in the L-queue while the
C-queue is empty, this leads to a NULL skb dereference during limit or
memlimit enforcement.
This is fixed by first dequeuing from the C-queue path if it is
non-empty. Once the C-queue is empty, packets are dequeued directly from
the L-queue. Return values from qdisc_dequeue_internal() are checked for
both queues. When dequeuing from the L-queue, the parent qdisc qlen and
backlog counters are updated explicitly to keep overall qdisc statistics
consistent.
Fixes: 320d031ad6e4 ("sched: Struct definition and parsing of dualpi2 qdisc")
Reported-by: "Kito Xu (veritas501)" <hxzene@gmail.com>
Closes: https://lore.kernel.org/netdev/20260413075740.2234828-1-hxzene@gmail.com/
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20260417152551.71648-1-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When QoS loopback is enabled for GDM3 or GDM4, incoming packets are
forwarded to GDM2. However, the PPE cpu port for GDM2 is not configured
in this path, causing traffic originating from GDM3/GDM4, which may
be set up as WAN ports backed by QDMA1, to be incorrectly directed
to QDMA0 instead.
Configure the PPE cpu port for GDM2 when QoS loopback is active on
GDM3 or GDM4 to ensure traffic is routed to the correct QDMA instance.
Fixes: 9cd451d414f6 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260417-airoha-ppe-cpu-port-for-gdm2-loopback-v1-1-c7a9de0f6f57@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The event message buffer response data size got checked later when
processing, but check it right after the response comes back. It
appears some BMCs may return an empty message instead of an error
when fetching events.
There are apparently some new BMCs that make this error, so we need to
compensate.
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Closes: https://lore.kernel.org/lkml/20260415115930.3428942-1-matt@readmodwrite.com/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Stanislav Fomichev says:
====================
net: sleepable ndo_set_rx_mode
This series adds a new ndo_set_rx_mode_async callback that enables
drivers to handle address list updates in a sleepable context. The
current ndo_set_rx_mode is called under the netif_addr_lock spinlock
with BHs disabled, which prevents drivers from sleeping. This is
problematic for ops-locked drivers that need to sleep.
The approach:
1. Add snapshot/reconcile infrastructure for address lists
2. Introduce dev_rx_mode_work that takes snapshots under the lock,
drops the lock, calls the driver, then reconciles changes back
3. Move promiscuity handling into the scheduled work as well
4. Convert existing ops-locked drivers to ndo_set_rx_mode_async
5. Add a warning for ops-locked drivers still using ndo_set_rx_mode
6. Add a selftest exercising the team+bridge+macvlan topology that
triggers the addr_lock -> ops_lock ordering issue
====================
Link: https://patch.msgid.link/20260416185712.2155425-1-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace teamd daemon usage with ip link commands for team device
setup. teamd -d daemonizes and returns to the shell before port
addition completes, creating a race: the test may create the macvlan
(and check for its address on a slave) before teamd has finished
adding ports. This makes the test inherently dependent on scheduling
timing.
Using ip commands makes port addition synchronous, removing the race
and making the test deterministic.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-16-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test that exercises the ndo_change_rx_flags path through a
macvlan -> bridge -> team -> dummy stack. This triggers dev_uc_add
under addr_list_lock which flips promiscuity on the lower device.
With the new work queue approach, this must not deadlock.
Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-15-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that all in-tree ops-locked drivers have been converted to
ndo_set_rx_mode_async, add a warning in register_netdevice to catch
any remaining or newly added drivers that use ndo_set_rx_mode with
ops locking. This ensures future driver authors are guided toward
the async path.
Also route ops-locked devices through netdev_rx_mode_work even if they
lack rx_mode NDOs, to ensure netdev_ops_assert_locked() does not fire
on the legacy path where only RTNL is held.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-14-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert netkit driver from ndo_set_rx_mode to ndo_set_rx_mode_async.
The netkit driver's set_multicast_list is a no-op, presumably
for the same reason as the one in dummy? (fake multicast ability)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-13-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert dummy driver from ndo_set_rx_mode to ndo_set_rx_mode_async.
The dummy driver's set_multicast_list is a no-op, so the conversion
is straightforward: update the signature and the ops assignment.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-12-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert netdevsim from ndo_set_rx_mode to ndo_set_rx_mode_async.
The callback is a no-op stub so just update the signature and
ops struct wiring.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-11-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert iavf from ndo_set_rx_mode to ndo_set_rx_mode_async.
iavf_set_rx_mode now takes explicit uc/mc list parameters and
uses __hw_addr_sync_dev on the snapshots instead of __dev_uc_sync
and __dev_mc_sync.
The iavf_configure internal caller passes the real lists directly.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-10-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the introduction of ndo_set_rx_mode_async (as discussed in [1])
we can call bnxt_cfg_rx_mode directly. Convert bnxt_cfg_rx_mode to
use uc/mc snapshots and move its call in bnxt_sp_task to the
section that resets BNXT_STATE_IN_SP_TASK. Switch to direct call in
bnxt_set_rx_mode.
Link: https://lore.kernel.org/netdev/CACKFLi=5vj8hPqEUKDd8RTw3au5G+zRgQEqjF+6NZnyoNm90KA@mail.gmail.com/ [1]
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-9-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert bnxt from ndo_set_rx_mode to ndo_set_rx_mode_async.
bnxt_set_rx_mode, bnxt_mc_list_updated and bnxt_uc_list_updated
now take explicit uc/mc list parameters and iterate with
netdev_hw_addr_list_for_each instead of netdev_for_each_{uc,mc}_addr.
The bnxt_cfg_rx_mode internal caller passes the real lists under
netif_addr_lock_bh.
BNXT_RX_MASK_SP_EVENT is still used here, next patch converts to
the direct call.
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-8-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert mlx5 from ndo_set_rx_mode to ndo_set_rx_mode_async. The
driver's mlx5e_set_rx_mode now receives uc/mc snapshots and calls
mlx5e_fs_set_rx_mode_work directly instead of queueing work.
mlx5e_sync_netdev_addr and mlx5e_handle_netdev_addr now take
explicit uc/mc list parameters and iterate with
netdev_hw_addr_list_for_each instead of netdev_for_each_{uc,mc}_addr.
Fallback to netdev's uc/mc in a few places and grab addr lock.
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-7-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert fbnic from ndo_set_rx_mode to ndo_set_rx_mode_async. The
driver's __fbnic_set_rx_mode() now takes explicit uc/mc list
parameters and uses __hw_addr_sync_dev() on the snapshots instead
of __dev_uc_sync/__dev_mc_sync on the netdev directly.
Update callers in fbnic_up, fbnic_fw_config_after_crash,
fbnic_bmc_rpc_check and fbnic_set_mac to pass the real address
lists calling __fbnic_set_rx_mode outside the async work path.
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: kernel-team@meta.com
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-6-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move unicast promiscuity tracking into netdev_rx_mode_work so it runs
under netdev_ops_lock instead of under the addr_lock spinlock. This
is required because __dev_set_promiscuity calls dev_change_rx_flags
and __dev_notify_flags, both of which may need to sleep.
Change ASSERT_RTNL() to netdev_ops_assert_locked() in
__dev_set_promiscuity, netif_set_allmulti and __dev_change_flags
since these are now called from the work queue under the ops lock.
Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Fixes: 78cd408356fe ("net: add missing instance lock to dev_set_promiscuity")
Reported-by: syzbot+2b3391f44313b3983e91@syzkaller.appspotmail.com
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-5-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a per-device netdev_hw_addr_list cache (rx_mode_addr_cache) that
allows __hw_addr_list_snapshot() and __hw_addr_list_reconcile() to
reuse previously allocated entries instead of hitting GFP_ATOMIC on
every snapshot cycle.
snapshot pops entries from the cache when available, falling back to
__hw_addr_create(). reconcile splices both snapshot lists back into
the cache via __hw_addr_splice(). The cache is flushed in
free_netdev().
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-4-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
