| Age | Commit message (Collapse) | Author |
|---|
|
Reset internal port states (such as vdm_sm_running and
explicit_contract) on soft reset AMS as the port needs to negotiate a
new contract. The consequence of leaving the states in as-is cond are as
follows:
* port is in SRC power role and an explicit contract is negotiated
with the port partner (in sink role)
* port partner sends a Soft Reset AMS while VDM State Machine is
running
* port accepts the Soft Reset request and the port advertises src caps
* port partner sends a Request message but since the explicit_contract
and vdm_sm_running are true from previous negotiation, the port ends
up sending Soft Reset instead of Accept msg.
Stub Log:
[ 203.653942] AMS DISCOVER_IDENTITY start
[ 203.653947] PD TX, header: 0x176f
[ 203.655901] PD TX complete, status: 0
[ 203.657470] PD RX, header: 0x124f [1]
[ 203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1
[ 203.657482] AMS DISCOVER_IDENTITY finished
[ 203.657484] cc:=4
[ 204.155698] PD RX, header: 0x144f [1]
[ 204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1
[ 204.155741] PD TX, header: 0x196f
[ 204.157622] PD TX complete, status: 0
[ 204.160060] PD RX, header: 0x4d [1]
[ 204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS]
[ 204.160076] PD TX, header: 0x163
[ 204.162486] PD TX complete, status: 0
[ 204.162832] AMS SOFT_RESET_AMS finished
[ 204.162840] cc:=4
[ 204.162891] AMS POWER_NEGOTIATION start
[ 204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION]
[ 204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION]
[ 204.162913] PD TX, header: 0x1361
[ 204.165529] PD TX complete, status: 0
[ 204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION]
[ 204.166996] PD RX, header: 0x1242 [1]
[ 204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION]
[ 204.167019] AMS POWER_NEGOTIATION finished
[ 204.167020] cc:=4
[ 204.167083] AMS SOFT_RESET_AMS start
[ 204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS]
[ 204.167092] PD TX, header: 0x16d
[ 204.168824] PD TX complete, status: 0
[ 204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS]
[ 204.171876] PD RX, header: 0x43 [1]
[ 204.171879] AMS SOFT_RESET_AMS finished
This causes COMMON.PROC.PD.11.2 check failure for
TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260414-fix-soft-reset-v1-1-01d7cb9764e2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation.
Fixes: 01af542392b5 ("usb: ulpi: fix double free in ulpi_register_interface() error path")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 65111084c63d7 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:
- It breaks DMA on 15xx boards - transfers just silently stall.
- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.
It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1eb998a ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").
So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).
Fixes: 65111084c63d ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The H616 SoC has a video engine, and two SRAM regions needed by it.
Add the SRAM regions to the dtsi file. The video engine will be added
in a separate change.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
[wens@kernel.org: Add VE SRAM region, commit message, and split into two]
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-8-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The Allwinner H616 has two switchable peripheral SRAM regions:
- The VE SRAM is a 2 MB dedicated SRAM for the Video Engine. CPU access
to this region is enabled by default. CPU access can be disabled,
after which reads will show the same stale value for all addresses,
while writes are ignored.
The mux value for this region is different from previous generations.
- The SRAM C region is an alias of the first 128 KB of VE SRAM, plus 64
KB of DE SRAM. The latter is otherwise unaccessible from the CPU. When
CPU access is disabled, the whole region reads as zero, while writes
are ignored.
The mux value for this region is the same as on the A64 and H6.
Add data for the VE SRAM. The register values were taken from the BSP
vendor kernel.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
On the H616, the video engine needs to claim two SRAM regions.
Support claiming multiple regions per device.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
On the H616, the SRAM C region is an alias mapping to part of the VE
SRAM (accessible in whole at a different address) and part of the DE
SRAM (otherwise unaccessible). As such both the VE and DE need to claim
this SRAM region to prevent access from the CPU.
The SRAM claim API is designed so that a "claim" routes the SRAM to the
peripheral device, disabling access from the CPU. So long as the written
register value is the same for all the claimants involved, allowing
multiple or repeated claims is trivial. This is indeed the case for all
supported SRAM regions. The only known SRAM region to have multiple
different settings is the SRAM C2 region; this can be claimed by the AE,
CE, or ACE (assumed to be AE + CE). This region is not supported, and
likely will never be needed nor supported, as there is no documentation
for the peripherals involved.
Change the SRAM region "claimed" field from a boolean to a reference
count. A claim will increment the count, while a release decreases it.
The first claim will trigger the register value write. The driver
otherwise behaves as before.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
sunxi_sram_func contains value mapping that do not change at runtime.
Const-ify them.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The Allwinner H616 has two switchable peripheral SRAM regions:
- The VE SRAM is a 2 MB dedicated SRAM for the Video Engine. CPU access
to this region is enabled by default. CPU access can be disabled,
after which reads will show the same stale value for all addresses,
while writes are ignored.
The mux value for this region is different from previous generations.
- The SRAM C region is an alias of the first 128 KB of VE SRAM, plus 64
KB of DE SRAM. The latter is otherwise unaccessible from the CPU. When
CPU access is disabled, the whole region reads as zero, while writes
are ignored.
The mux value for this region is the same as on the A64 and H6.
Add compatible strings for both of them.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The Allwinner H616 has two switchable peripheral SRAM regions:
- The VE SRAM is a 2 MB dedicated SRAM for the Video Engine. CPU access
to this region is enabled by default. CPU access can be disabled,
after which reads will show the same stale value for all addresses,
while writes are ignored.
The mux value for this region is different from previous generations,
and thus needs a completely new compatible.
- The SRAM C region is an alias of the first 128 KB of VE SRAM, plus 64
KB of DE SRAM. The latter is otherwise unaccessible from the CPU. When
CPU access is disabled, the whole region reads as zero, while writes
are ignored.
The mux value for this region is the same as on the A64 and H6. The
existing compatible for the A64 already covers this.
Add the compatible for the VE SRAM to the list of covered compatibles in
the generic SRAM region binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Fix "chose" -> "choose" in pci.rst
Fix "result an" -> "result in an" in pciebus-howto.rst
Signed-off-by: josh ziegler <joshziegler76@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260421012059.251492-1-joshziegler76@gmail.com
|
|
Revert b0e85c3c8554 ("PCI: Add Kconfig options for MPS/MRRS strategy"),
which allowed build-time selection of the "off", "default", "safe",
"performance", or "peer2peer" strategies for MPS and MRRS configuration.
These strategies can be selected at boot-time using the
"pci=pcie_bus_tune_*" kernel parameters.
Per the discussion mentioned below, these Kconfig options were added to
work around a hardware defect in a WiFi device used in a cable modem. The
defect occurred only when the device was configured with MPS=128, and
Kconfig was a way to avoid that setting. It was easier for the modem
vendor to use Kconfig and update the kernel image than to change the kernel
parameters.
Neither Kconfig nor kernel parameters are a complete solution because the
broken WiFi device may be used in other systems where it may be configured
with MPS=128 and be susceptible to the defect.
Remove the Kconfig settings to simplify the MPS code. If we can identify
the WiFi device in question, we may be able to make a generic quirk to
avoid the problem on all system.
This is not a fix and should not be backported to previous kernels.
Link: https://lore.kernel.org/all/CA+-6iNzd0RJO0L021qz8CKrSviSst6QehY-QtJxz_-EVY0Hj0Q@mail.gmail.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260326221311.1356180-1-bhelgaas@google.com
|
|
Extend the checks in pcim_p2pdma_init() and pcim_p2pdma_provider() to
exclude functions that have pdev->non_mappable_bars set.
Consumers such as VFIO were previously able to map these for access by the
CPU or P2P. Update the comment on non_mappable_bars to show it refers to
any access, not just userspace CPU access.
Fixes: 372d6d1b8ae3c ("PCI/P2PDMA: Refactor to separate core P2P functionality from memory allocation")
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Matt Evans <mattev@meta.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20260423173051.1999679-1-mattev@meta.com
|
|
pci_pwrctrl_is_required() detects whether a device needs PCI pwrctrl
support. It is currently used in pci_pwrctrl_create_device(), but not in
pci_pwrctrl_power_{on/off}_device() APIs. This leads to pwrctrl core trying
to power on/off incompatible devices like USB hub downstream ports defined
in DT.
Add this check to prevent pwrctrl core from poking at wrong devices.
Fixes: b35cf3b6aa1e ("PCI/pwrctrl: Add APIs to power on/off pwrctrl devices")
Reported-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split pci_pwrctrl_is_required() move to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
|
|
Move pci_pwrctrl_is_required() earlier in the file so it can be used by
pci_pwrctrl_power_off_device() and pci_pwrctrl_power_on_device().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split to its own patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
|
|
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state().
Fixes: 5a8f77e24a30 ("PCI/IOV: Restore VF resizable BAR state after reset")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/44a4ae53ec2825816b816c85cd378430d9a95cc6.1776429882.git.mnencia@kcore.it
|
|
pci_restore_rebar_state() uses the Resizable BAR Control register to decide
how many BARs to restore (nbars) and which BAR each iteration addresses
(bar_idx).
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7, past the spec's valid ranges for both fields.
pci_resource_n() then returns an unrelated resource slot, whose size is
used to derive a nonsensical value written back to the Resizable BAR
Control register.
Bail out if any Resizable BAR Control read returns PCI_ERROR_RESPONSE. No
further BARs are touched, which is safe because a config read that returns
PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is
pointless.
Fixes: d3252ace0bc6 ("PCI: Restore resized BAR state on resume")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/666cac19b5daa0ab0e0ab64454e76b4d24465dbd.1776429882.git.mnencia@kcore.it
|
|
When a PCI device is unbound from its driver, pci_device_remove() sets the
cached power state in pci_dev->current_state to PCI_UNKNOWN. This was
introduced by commit 2449e06a5696 ("PCI: reset pci device state to unknown
state for resume") to invalidate the cached power state in case the system
is subsequently put to sleep.
For bound devices, the cached power state is set to PCI_UNKNOWN in
pci_pm_suspend_noirq(), immediately before entering system sleep.
Extend to unbound devices for consistency.
This obviates the need to change the cached power state on unbind, so stop
doing so.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/af7d11d3ceb231acc90829f7a5c8400c2446744f.1776415510.git.lukas@wunner.de
|
|
When ntfs_attr_get_search_ctx() fails and returns NULL, the function
returned early without calling put_page(ipage).
Fix this by jumping to err_out label on error. The err_out path now
properly releases the page and the mutex, with a NULL check for
the search context.
Reported-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Without poweroff node Exynos850-based board continue to draw current
(around ~60 mA with my test setup) after poweroff. Kernel also reports
different lockup problems and RCU stalls warnings continuosly after
last kernel messages about hardware being switched off.
Turns out we missed a write to PMU's PS_HOLD_CONTROL (PMU + 0x30c)
register that actually switches the SoC off.
Add poweroff node that implements this.
With this change the current draw after power off is in range of few
milliampers and lockup messages are no more.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20260325-exynos850-poweroff-v1-1-34c19c06e74d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
In ntfs_mapping_pairs_decompress(), lowest_vcn is read from
on-disk metadata and used as the initial vcn without validation.
A malformed value can introduce an invalid (e.g. negative) vcn,
corrupting the runlist from the start.
Additionally, the accumulation
vcn += deltaxcn
does not check for s64 overflow. A crafted mapping pairs array
can wrap vcn to a negative value, breaking the monotonically-
increasing invariant relied upon by ntfs_rl_vcn_to_lcn() and
related helpers.
Fix this by validating lowest_vcn and using check_add_overflow()
for vcn accumulation.
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ntfs_reparse_set_wsl_symlink() converts the symlink target into an
allocated NLS string and transfers ownership to ni->target only after
ntfs_set_ntfs_reparse_data() succeeds. If setting the reparse data fails,
the converted target is left unreferenced and leaks.
Free the converted target on the reparse update failure path. Use kfree()
for the other local failure path as well, matching the ntfs_ucstonls()
allocation contract.
Fixes: fc053f05ca28 ("ntfs: add reparse and ea operations")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ntfs_index_walk_down() allocates ictx->ib when descending from the root
into an index allocation block. If that allocation fails, the old code
still passes the NULL buffer to ntfs_ib_read(), which can write through
it via ntfs_inode_attr_pread().
Allocate the index block into a temporary pointer and return -ENOMEM
before changing the index context on allocation failure. Also propagate
ERR_PTR() through ntfs_index_next() and ntfs_readdir() so walk-down
allocation or index block read failures are not mistaken for normal
index iteration inside the filesystem.
ntfs_readdir() keeps the existing userspace-visible behavior of
suppressing readdir errors after marking end_in_iterate; this change only
prevents the walk-down failure path from dereferencing NULL internally.
The failure was reproduced with failslab fail-nth injection on getdents64;
the original module hits a NULL pointer dereference in memcpy_orig through
ntfs_ib_read(), while the patched module reaches the same
ntfs_index_walk_down() allocation failure without crashing.
Fixes: 0a8ac0c1fa0b ("ntfs: update directory operations")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Param used for setting FW trace mask at module load time. Other debugfs
entry exist to allow update at run time.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260427-ftrace_fix-v3-2-e081530759a8@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Fix invalid data access by passing right data for debugfs entry.
[ 171.549793] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 171.559248] Mem abort info:
[ 171.562173] ESR = 0x0000000096000044
[ 171.566227] EC = 0x25: DABT (current EL), IL = 32 bits
[ 171.573108] SET = 0, FnV = 0
[ 171.576448] EA = 0, S1PTW = 0
[ 171.579745] FSC = 0x04: level 0 translation fault
[ 171.584760] Data abort info:
[ 171.588012] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
[ 171.593734] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[ 171.598962] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 171.604471] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000083837000
[ 171.611358] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ 171.618500] Internal error: Oops: 0000000096000044 [#1] SMP
[ 171.624222] Modules linked in: powervr drm_shmem_helper drm_gpuvm...
[ 171.656580] CPU: 0 UID: 0 PID: 549 Comm: bash Not tainted 7.0.0-rc2-g730b257ba723-dirty #13 PREEMPT
[ 171.665773] Hardware name: BeagleBoard.org BeaglePlay (DT)
[ 171.671296] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 171.678306] pc : pvr_fw_trace_mask_set+0x78/0x154 [powervr]
[ 171.683959] lr : pvr_fw_trace_mask_set+0x4c/0x154 [powervr]
[ 171.689593] sp : ffff8000835ebb90
[ 171.692929] x29: ffff8000835ebc00 x28: ffff000005c60f80 x27: 0000000000000000
[ 171.700130] x26: 0000000000000000 x25: ffff00000504af28 x24: 0000000000000000
[ 171.707324] x23: ffff00000504af50 x22: 0000000000000203 x21: 0000000000000000
[ 171.714518] x20: ffff000005c44a80 x19: ffff000005c457b8 x18: 0000000000000000
[ 171.721715] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaae8887580
[ 171.728908] x14: 0000000000000000 x13: 0000000000000000 x12: ffff8000835ebc30
[ 171.736095] x11: ffff00000504af2a x10: ffff00008504af29 x9 : 0fffffffffffffff
[ 171.743286] x8 : ffff8000835ebbf8 x7 : 0000000000000000 x6 : 000000000000002a
[ 171.750479] x5 : ffff00000504af2e x4 : 0000000000000000 x3 : 0000000000000010
[ 171.757674] x2 : 0000000000000203 x1 : 0000000000000000 x0 : ffff8000835ebba0
[ 171.764871] Call trace:
[ 171.767342] pvr_fw_trace_mask_set+0x78/0x154 [powervr] (P)
[ 171.772984] simple_attr_write_xsigned.isra.0+0xe0/0x19c
[ 171.778341] simple_attr_write+0x18/0x24
[ 171.782296] debugfs_attr_write+0x50/0x98
[ 171.786341] full_proxy_write+0x6c/0xa8
[ 171.790208] vfs_write+0xd4/0x350
[ 171.793561] ksys_write+0x70/0x108
[ 171.796995] __arm64_sys_write+0x1c/0x28
[ 171.800952] invoke_syscall+0x48/0x10c
[ 171.804740] el0_svc_common.constprop.0+0x40/0xe0
[ 171.809487] do_el0_svc+0x1c/0x28
[ 171.812834] el0_svc+0x34/0x108
[ 171.816013] el0t_64_sync_handler+0xa0/0xe4
[ 171.820237] el0t_64_sync+0x198/0x19c
[ 171.823939] Code: 32000262 b90ac293 1a931056 9134e293 (b9000036)
[ 171.830073] ---[ end trace 0000000000000000 ]---
Fixes: a331631496a0 ("drm/imagination: Simplify module parameters")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260427-ftrace_fix-v3-1-e081530759a8@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Modernize string-to-number conversion in mtdsuper.c by replacing
simple_strtoul with kstrtouint. This change provides proper type safety
for MTD device numbers which are non-negative integers.
Using kstrtouint avoids unsigned long to int conversion and is more
appropriate for device indices. The debug output format specifier is
updated to %u for unsigned int.
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Replace deprecated simple_strtoul with kstrtouint for better error
handling and type safety. The kstrtouint function provides stricter
validation, automatically rejecting inputs like "123abc" that
simple_strtoul would partially accept.
Using kstrtouint avoids unsigned long to int conversion and is more
appropriate for MTD device indices which are non-negative integers.
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In most scenarios this variant is actually unused (VCR is written in
SSDR mode), but we need to provide an octal variant. The address is 24
bits but is sent over 4 bytes MSB first. This means we need to shift the
register address by one extra byte for the address to be correct.
I didn't catch this initially because the volatile register region is
256 bytes wide, so the write-then-read procedure did work with the small
register addresses I was using at that time: 0 and 1.
Fixes: 44a2f49b9bdc ("mtd: spinand: winbond: W35N octal DTR support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Both W35N02JW and W35N04JW diverge from W35N01JW when it comes to the
"data read" operation in ODTR mode. In order to stuff more address
bits (up to 18), the second command byte is replaced by the most
significant address bits, keeping the number of address bytes to 2.
Fixes: 44a2f49b9bdc ("mtd: spinand: winbond: W35N octal DTR support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Some devices stuff address bits in the double byte opcode (in place of
the repeated byte) in order to be able to increase the size of the
devices, without adding extra address bytes.
Create a flag to identify those devices. When the flag is set, use the
"packed" variant for the read data operation.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array.
Cc: stable@vger.kernel.org
Fixes: 0257be79fc4a ("mtd: spi-nor: expose internal parameters via debugfs")
Closes: https://sashiko.dev/#/patchset/20260417-die-erase-fix-v2-1-73bb7004ebad%40infineon.com [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mfill_copy_folio_retry()
mfill_copy_folio_retry() drops mmap_lock for the copy_from_user() call.
During this window, the VMA can be replaced with a different type (e.g.
hugetlb), making the caller's ops pointer stale. Subsequent use of the
stale ops would dispatch into the wrong per-vma handlers.
Capture the VMA's ops via vma_uffd_ops() before dropping the lock and
compare against the current vma_uffd_ops() after re-acquiring it.
Return -EAGAIN if they differ so the operation can be retried. This
avoids comparing against the caller's ops which may have been
overridden to anon_uffd_ops for MAP_PRIVATE file-backed mappings.
Link: https://lore.kernel.org/20260424183638.196227-1-devnexen@gmail.com
Fixes: 6ab703034f14 ("userfaultfd: mfill_atomic(): remove retry logic")
Reported-by: Usama Arif <usama.arif@linux.dev>
Closes: https://lore.kernel.org/all/20260410114809.3592720-1-usama.arif@linux.dev/
Signed-off-by: David Carlier <devnexen@gmail.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kdump project URL in MAINTAINERS points to
http://lse.sourceforge.net/kdump/, but it is no longer maintained.
Remove this outdated link to avoid confusion and keep the file
up to date.
Discussion to remove this link:
https://lore.kernel.org/all/e1e9e200-17d7-4ae9-b0eb-71300f4eb1ac@linux.ibm.com/
Link: https://lore.kernel.org/20260418080226.40415-1-sourabhjain@linux.ibm.com
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <baoquan.he@linux.dev>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON_STAT updates 'enabled' parameter value, which represents the running
status of its kdamond, when the user explicitly requests start/stop of the
kdamond. The kdamond can, however, be stopped even if the user explicitly
requested the stop, if ctx->regions_score_histogram allocation failure at
beginning of the execution of the kdamond. Hence, if the kdamond is
stopped by the allocation failure, the value of the parameter can be
stale.
Users could show the stale value and be confused. The problem will only
rarely happen in real and common setups because the allocation is arguably
too small to fail. Also, unlike the similar bugs that are now fixed in
DAMON_RECLAIM and DAMON_LRU_SORT, kdamond can be restarted in this case,
because DAMON_STAT force-updates the enabled parameter value for user
inputs. The bug is a bug, though.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
The issue was dicovered [1] by Sashiko.
Link: https://lore.kernel.org/20260419161003.79176-4-sj@kernel.org
Link: https://lore.kernel.org/20260416040602.88665-1-sj@kernel.org [1]
Fixes: 369c415e6073 ("mm/damon: introduce DAMON_STAT module")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON_LRU_SORT updates 'enabled' and 'kdamond_pid' parameter values, which
represents the running status of its kdamond, when the user explicitly
requests start/stop of the kdamond. The kdamond can, however, be stopped
in events other than the explicit user request in the following three
events.
1. ctx->regions_score_histogram allocation failure at beginning of the
execution,
2. damon_commit_ctx() failure due to invalid user input, and
3. damon_commit_ctx() failure due to its internal allocation failures.
Hence, if the kdamond is stopped by the above three events, the values of
the status parameters can be stale. Users could show the stale values and
be confused. This is already bad, but the real consequence is worse.
DAMON_LRU_SORT avoids unnecessary damon_start() and damon_stop() calls
based on the 'enabled' parameter value. And the update of 'enabled'
parameter value depends on the damon_start() and damon_stop() call
results. Hence, once the kdamond has stopped by the unintentional events,
the user cannot restart the kdamond before the system reboot. For
example, the issue can be reproduced via below steps.
# cd /sys/module/damon_lru_sort/parameters
#
# # start DAMON_LRU_SORT
# echo Y > enabled
# ps -ef | grep kdamond
root 806 2 0 17:53 ? 00:00:00 [kdamond.0]
root 808 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # commit wrong input to stop kdamond withou explicit stop request
# echo 3 > addr_unit
# echo Y > commit_inputs
bash: echo: write error: Invalid argument
#
# # confirm kdamond is stopped
# ps -ef | grep kdamond
root 811 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # users casn now show stable status
# cat enabled
Y
# cat kdamond_pid
806
#
# # even after fixing the wrong parameter,
# # kdamond cannot be restarted.
# echo 1 > addr_unit
# echo Y > enabled
# ps -ef | grep kdamond
root 815 803 0 17:54 pts/4 00:00:00 grep kdamond
The problem will only rarely happen in real and common setups for the
following reasons. The allocation failures are unlikely in such setups
since those allocations are arguably too small to fail. Also sane users
on real production environments may not commit wrong input parameters.
But once it happens, the consequence is quite bad. And the bug is a bug.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
Link: https://lore.kernel.org/20260419161003.79176-3-sj@kernel.org
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Co-developed-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/modules: detect and use fresh status", v3.
DAMON modules including DAMON_RECLAIM, DAMON_LRU_SORT and DAMON_STAT
commonly expose the kdamond running status via their parameters. Under
certain scenarios including wrong user inputs and memory allocation
failures, those parameter values can be stale. It can confuse users. For
DAMON_RECLAIM and DAMON_LRU_SORT, it even makes the kdamond unable to be
restarted before the system reboot.
The problem comes from the fact that there are multiple events for the
status changes and it is difficult to follow up all the scenarios. Fix
the issue by detecting and using the status on demand, instead of using a
cached status that is difficult to be updated.
Patches 1-3 fix the bugs in DAMON_RECLAIM, DAMON_LRU_SORT and DAMON_STAT
in the order.
This patch (of 3):
DAMON_RECLAIM updates 'enabled' and 'kdamond_pid' parameter values, which
represents the running status of its kdamond, when the user explicitly
requests start/stop of the kdamond. The kdamond can, however, be stopped
in events other than the explicit user request in the following three
events.
1. ctx->regions_score_histogram allocation failure at beginning of the
execution,
2. damon_commit_ctx() failure due to invalid user input, and
3. damon_commit_ctx() failure due to its internal allocation failures.
Hence, if the kdamond is stopped by the above three events, the values of
the status parameters can be stale. Users could show the stale values and
be confused. This is already bad, but the real consequence is worse.
DAMON_RECLAIM avoids unnecessary damon_start() and damon_stop() calls
based on the 'enabled' parameter value. And the update of 'enabled'
parameter value depends on the damon_start() and damon_stop() call
results. Hence, once the kdamond has stopped by the unintentional events,
the user cannot restart the kdamond before the system reboot. For
example, the issue can be reproduced via below steps.
# cd /sys/module/damon_reclaim/parameters
#
# # start DAMON_RECLAIM
# echo Y > enabled
# ps -ef | grep kdamond
root 806 2 0 17:53 ? 00:00:00 [kdamond.0]
root 808 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # commit wrong input to stop kdamond withou explicit stop request
# echo 3 > addr_unit
# echo Y > commit_inputs
bash: echo: write error: Invalid argument
#
# # confirm kdamond is stopped
# ps -ef | grep kdamond
root 811 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # users casn now show stable status
# cat enabled
Y
# cat kdamond_pid
806
#
# # even after fixing the wrong parameter,
# # kdamond cannot be restarted.
# echo 1 > addr_unit
# echo Y > enabled
# ps -ef | grep kdamond
root 815 803 0 17:54 pts/4 00:00:00 grep kdamond
The problem will only rarely happen in real and common setups for the
following reasons. The allocation failures are unlikely in such setups
since those allocations are arguably too small to fail. Also sane users
on real production environments may not commit wrong input parameters.
But once it happens, the consequence is quite bad. And the bug is a bug.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
Link: https://lore.kernel.org/20260419161003.79176-1-sj@kernel.org
Link: https://lore.kernel.org/20260419161003.79176-2-sj@kernel.org
Fixes: e035c280f6df ("mm/damon/reclaim: support online inputs update")
Co-developed-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several of the mm selftests made use of /proc/pid/mem as part of their
operation but we do not specify this in the config fragment for them, at
least mkdirty and ksm_functional_tests have this requirement.
This has been working fine in practice since PROC_MEM_ALWAYS_FORCE was the
default setting but commit 599bbba5a36f ("proc: make PROC_MEM_FORCE_PTRACE
the Kconfig default") that is no longer the case, meaning that tests run
on kernels built based on defconfigs have started having the new more
restrictive default and failing. Add PROC_MEM_ALWAYS_FORCE to the config
fragment for the mm selftests.
Thanks to Aishwarya TCV for spotting the issue and identifying the commit
that introduced it.
Link: https://lore.kernel.org/20260416-selftests-mm-proc-mem-always-force-v1-1-3f5865153c67@kernel.org
Fixes: 599bbba5a36f ("proc: make PROC_MEM_FORCE_PTRACE the Kconfig default")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_sysfs_quot_goal->path can be read and written by users, via DAMON
sysfs 'path' file. It can also be indirectly read, for the parameters
{on,off}line committing to DAMON. The reads for parameters committing are
protected by damon_sysfs_lock to avoid the sysfs files being destroyed
while any of the parameters are being read. But the user-driven direct
reads and writes are not protected by any lock, while the write is
deallocating the path-pointing buffer. As a result, the readers could
read the already freed buffer (user-after-free). Note that the user-reads
don't race when the same open file is used by the writer, due to kernfs's
open file locking. Nonetheless, doing the reads and writes with separate
open files would be common. Fix it by protecting both the user-direct
reads and writes with damon_sysfs_lock.
Link: https://lore.kernel.org/20260423150253.111520-3-sj@kernel.org
Fixes: c41e253a411e ("mm/damon/sysfs-schemes: implement path file under quota goal directory")
Co-developed-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.19.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock.
Link: https://lore.kernel.org/20260423150253.111520-1-sj@kernel.org
Link: https://lore.kernel.org/20260423150253.111520-2-sj@kernel.org
Fixes: 4f489fe6afb3 ("mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write")
Co-developed-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update my email address as my work email account is no longer in use.
Also update .mailmap.
Link: https://lore.kernel.org/20260423132649.31126-1-li.wang@linux.dev
Signed-off-by: Li Wang <li.wang@linux.dev>
Reviewed-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Li Wang <liwang@redhat.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Shannon Nelson <sln@onemain.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update my email address to qi.zheng@linux.dev.
Link: https://lore.kernel.org/20260423071628.44044-1-qi.zheng@linux.dev
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Switching to private email address. Update all contact information
Add an entry to mailmap at the same time.
Link: https://lore.kernel.org/20260422184310.2682901-1-liam@infradead.org
Signed-off-by: Liam R. Howlett <liam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the user requests a total hugetlb CMA size without per-node
specification, hugetlb_cma_reserve() computes per_node from
hugetlb_cma_size and the number of nodes that have memory
per_node = DIV_ROUND_UP(hugetlb_cma_size,
nodes_weight(hugetlb_bootmem_nodes));
The reservation loop later computes
size = round_up(min(per_node, hugetlb_cma_size - reserved),
PAGE_SIZE << order);
So the actually reserved per_node size is multiple of (PAGE_SIZE <<
order), but the logged per_node is not rounded up, so it may be smaller
than the actual reserved size.
For example, as the existing comment describes, if a 3 GB area is
requested on a machine with 4 NUMA nodes that have memory, 1 GB is
allocated on the first three nodes, but the printed log is
hugetlb_cma: reserve 3072 MiB, up to 768 MiB per node
Round per_node up to (PAGE_SIZE << order) before logging so that the
printed log always matches the actual reserved size. No functional change
to the actual reservation size, as the following case analysis shows
1. remaining (hugetlb_cma_size - reserved) >= rounded per_node
- AS-IS: min() picks unrounded per_node;
round_up() returns rounded per_node
- TO-BE: min() picks rounded per_node;
round_up() returns rounded per_node (no-op)
2. remaining < unrounded per_node
- AS-IS: min() picks remaining;
round_up() returns round_up(remaining)
- TO-BE: min() picks remaining;
round_up() returns round_up(remaining)
3. unrounded per_node <= remaining < rounded per_node
- AS-IS: min() picks unrounded per_node;
round_up() returns rounded per_node
- TO-BE: min() picks remaining;
round_up() returns round_up(remaining) equals rounded per_node
Link: https://lore.kernel.org/20260422143353.852257-1-ekffu200098@gmail.com
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") # 5.7
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pattern "include/linux/page[-_]*" matches every file that starts with
"page", because it's a regex and not a glob (so it has the meaning of
include/linux/page + match [-_] 0+ times).
Fix it up into a more regex-correct expression. Doing so reduces CC's
drastically in patches that touch pagemap.h (which is maintained as part
of PAGE CACHE).
As a side-effect, move linux/pageblock-flags.h explicitly under PAGE
ALLOCATOR.
Link: https://lore.kernel.org/linux-mm/20260422005608.342028-1-fmayle@google.com/
Link: https://lore.kernel.org/20260422123726.517220-1-pfalcato@suse.de
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mmap_prepare hook functionality includes the ability to invoke
mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is
ones which are capable of calling the mmap hooks of other drivers/file
systems (e.g. overlayfs, shm).
As part of the mmap_prepare action functionality, we deal with errors by
unmapping the VMA should one arise. This works in the usual mmap_prepare
case, as we invoke this action at the last moment, when the VMA is
established in the maple tree.
However, the mmap() hook passes a not-fully-established VMA pointer to the
caller (which is the motivation behind the mmap_prepare() work), which is
detached.
So attempting to unmap a VMA in this state will be problematic, with the
most obvious symptom being a warning in vma_mark_detached(), because the
VMA is already detached.
It's also unncessary - the mmap() handler will clean up the VMA on error.
So to fix this issue, this patch propagates whether or not an mmap action
is being completed via the compatibility layer or directly.
If the former, then we do not attempt VMA cleanup, if the latter, then we
do.
This patch also updates the userland VMA tests to reflect the change.
Link: https://lore.kernel.org/20260421102150.189982-1-ljs@kernel.org
Fixes: ac0a3fc9c07d ("mm: add ability to take further action in vm_area_desc")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: syzbot+db390288d141a1dccf96@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69e69734.050a0220.24bfd3.0027.GAE@google.com/
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The proactive nr_dirty > gdtc->bg_thresh check in balance_dirty_pages()
only checks the global dirty threshold to start background writeback while
the writer is still free-running, but for strictlimit BDIs (eg fuse), the
per-wb dirty count can exceed the per-wb background threshold while the
global threshold is not yet exceeded, so background writeback for this
case never gets proactively started.
Add a per-wb threshold check for strictlimit BDIs so that background
writeback is started when wb_dirty exceeds wb_bg_thresh, which drains
dirty pages before the writer hits the throttle wall, matching the
proactive behavior that the global check provides for non-strictlimit
BDIs.
fio runs on fuse show about a 3-4% improvement in perf for buffered
writes:
fio --name=writeback_test --ioengine=psync --rw=write --bs=128k \
--size=2G --numjobs=4 --ramp_time=10 --runtime=20 \
--time_based --group_reporting=1 --direct=0
Link: https://lore.kernel.org/20260326234629.840938-2-joannelkoong@gmail.com
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix two error handling issues in kho_add_subtree(), where it doesn't
handle the error path correctly.
1. If fdt_setprop() fails after the subnode has been created, the
subnode is not removed. This leaves an incomplete node in the FDT
(missing "preserved-data" or "blob-size" properties).
2. The fdt_setprop() return value (an FDT error code) is stored
directly in err and returned to the caller, which expects -errno.
Fix both by storing fdt_setprop() results in fdt_err, jumping to a new
out_del_node label that removes the subnode on failure, and only setting
err = 0 on the success path, otherwise returning -ENOMEM (instead of
FDT_ERR_ errors that would come from fdt_setprop).
No user-visible changes. This patch fixes error handling in the KHO
(Kexec HandOver) subsystem, which is used to preserve data across kexec
reboots. The fix only affects a rare failure path during kexec
preparation — specifically when the kernel runs out of space in the
Flattened Device Tree buffer while registering preserved memory regions.
In the unlikely event that this error path was triggered, the old code
would leave a malformed node in the device tree and return an incorrect
error code to the calling subsystem, which could lead to confusing log
messages or incorrect recovery decisions. With this fix, the incomplete
node is properly cleaned up and the appropriate errno value is propagated,
this error code is not returned to the user.
Link: https://lore.kernel.org/20260410-kho_fix_send-v2-1-1b4debf7ee08@debian.org
Fixes: 3dc92c311498 ("kexec: add Kexec HandOver (KHO) generation helpers")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When session allocation fails during deserialization, the global 'err'
variable was not updated before returning. This caused subsequent calls
to luo_session_deserialize() to incorrectly report success.
Ensure 'err' is set to the error code from PTR_ERR(session). This ensures
that an error is correctly returned to userspace when it attempts to open
/dev/liveupdate in the new kernel if deserialization failed.
Link: https://lore.kernel.org/20260415193738.515491-1-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update my mailmap entry to point to my current email address.
Link: https://lore.kernel.org/ab2d502542c24491c191a76494717c340afb9a9b.1776691831.git.error27@gmail.com
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
