| Age | Commit message (Collapse) | Author |
|---|
|
I noticed this define was incorrect, it should be UpperAddress, but in
renaming it it became clear there were actually no users. Just get rid
of it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-viability-crepe-4e4c85e7c506@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
which controller
When prepare_message callbacks fail, the SPI core already reports which
controller the failure happened on. The corresponding code in the mem_ops
portion of the driver already reports the device a timeout occurred on,
so make the regular part of the driver do the same.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-porcupine-ninetieth-af00cb11b990@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It has been concluded by comparing the gate clock masks and vendor code
between PXA1908/28 that PXA1908's APBCP, similarly to PXA1928's APBC,
has controllable reset lines. Describe these in the driver for
correctness.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
It has been concluded by comparing the gate clock masks and vendor code
between PXA1908/28 that PXA1908's APBC, similarly to PXA1928's APBC, has
controllable reset lines. Describe these in the driver for correctness.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The APBC and APBCP controllers have reset lines exposed. Give them
a #reset-cells so that they may be used as reset controllers.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
All 19 muxes in the infra_muxes[] array are pure mux selectors without
a clock gate or update register, yet they were defined using
MUX_GATE_CLR_SET_UPD with gate_shift = -1.
This macro assigns mtk_mux_gate_clr_set_upd_ops, whose
enable/disable/is_enabled callbacks perform BIT(gate_shift). Since
gate_shift is stored as u8, the -1 truncates to 255, causing a
shift-out-of-bounds at runtime:
UBSAN: shift-out-of-bounds in drivers/clk/mediatek/clk-mux.c:76:8
shift exponent 255 is too large for 64-bit type 'long unsigned int'
UBSAN: shift-out-of-bounds in drivers/clk/mediatek/clk-mux.c:102:4
shift exponent 255 is too large for 64-bit type 'long unsigned int'
UBSAN: shift-out-of-bounds in drivers/clk/mediatek/clk-mux.c:122:16
shift exponent 255 is too large for 64-bit type 'long unsigned int'
Switch these definitions to MUX_CLR_SET, which uses
mtk_mux_clr_set_upd_ops (no gate callbacks) and does not require
callers to pass sentinel values for unused update register fields.
The actual clock gating for these peripherals is handled by the
separate GATE_INFRA* definitions further down.
Fixes: 4b4719437d85f ("clk: mediatek: add drivers for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The mfg_pll_sel mux has neither a clock gate nor an update register,
and upd_ofs is stored as u32, so the -1 truncates to 0xFFFFFFFF.
While upd_shift being -1 (as s8) prevents the update path from
executing at runtime, the bogus upd_ofs value is still stored in the
struct.
Use MUX_CLR_SET to avoid passing sentinel values to wrongly-typed
fields.
Fixes: 710573dee31b4 ("clk: mediatek: Add MT8192 basic clocks support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Some MediaTek SoCs (e.g. MT7988) define infra muxes that have neither
a clock gate nor an update register.
Add a MUX_CLR_SET convenience macro that takes only the mux register
offsets, bit shift, and width, hardcoding upd_ofs = 0 and
upd_shift = -1 so callers cannot accidentally pass bogus sentinel
values to wrongly-typed fields.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Our parent driver (clk-eyeq) now does the
device_set_of_node_from_dev(dev, dev->parent)
call through the newly introduced devm_auxiliary_device_create() helper.
Doing it again in the reset-eyeq probe would be redundant.
Drop both the WARN_ON() and the device_set_of_node_from_dev() call.
Also fix the following comment that talks about "our newfound OF node".
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Grow our clk-eyeq family; it knows how to spawn reset provider and pin
controller children. Expand with a generic PHY driver on EyeQ5.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> # On Mobileye EyeQ5
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
top_dclk is the DDR bus clock. If it is gated by clk_disable_unused,
all memory-mapped bus transactions cease to function, causing DMA
engines to hang and general system instability.
Mark it CLK_IS_CRITICAL so the CCF never gates it during the
unused clock sweep.
Fixes: e371a77255b8 ("clk: spacemit: k3: add the clock tree")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
pr_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER. For that the dev pointer has to be passed along.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use kzalloc_flex and a flexible array member to combine allocations
While at it, take clk_data out of the struct and move it into probe.
It's not used anywhere else.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Simplify allocation by using a flexible array member to combine
allocations. Use struct_size to calculate size properly.
Use __counted_by to get extra runtime analysis. Assign counting variable
right after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Simplify allocation by using a flexible array member and kzalloc_flex.
Add __counted_by for extra runtime analysis. Assign after allocation as
required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Combine allocations using kzalloc_flex and a flexible array member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use a flexible array member to combine kzalloc and kcalloc in one
allocation so they can be freed together.
Add __counted_by for extra runtime analysis. Move counting variable
assignment right after allocation as done by kzalloc_flex with GCC >=
15.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc2
Here are various unrelated fixes:
- Patches 1-2: set timestamp flags on 'ssk', not 'sk' (typo); Plus do
that with sleepable lock_sock/release_sock. A fix for v5.14.
- Patch 3: respect SO_LINGER(1, 0) by sending MP_FASTCLOSE at close time
as expected. A fix for v6.1.
- Patch 4: reset fullmesh counter after a flush. A fix for v6.19.
====================
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-0-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This variable counts how many MPTCP endpoints have a 'fullmesh' flag
set. After having flushed all MPTCP endpoints, it is then needed to
reset this counter.
Without this reset, this counter exposed to the userspace is wrong, but
also non-fullmesh endpoints added after the flush will not be taken into
account to create subflows in reaction to ADD_ADDRs.
Fixes: f88191c7f361 ("mptcp: pm: in-kernel: record fullmesh endp nb")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260422-mptcp-inc-limits-v6-0-903181771530%40kernel.org?part=15
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-4-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SO_LINGER socket option has been supported for a while with MPTCP
sockets [1], but it didn't cause the equivalent of a TCP reset as
expected when enabled and its time was set to 0. This was causing some
behavioural differences with TCP where some connections were not
promptly stopped as expected.
To fix that, an extra condition is checked at close() time before
sending an MP_FASTCLOSE, the MPTCP equivalent of a TCP reset.
Note that backporting up to [1] will be difficult as more changes are
needed to be able to send MP_FASTCLOSE. It seems better to stop at [2],
which was supposed to already imitate TCP.
Validated with MPTCP packetdrill tests [3].
Fixes: 268b12387460 ("mptcp: setsockopt: support SO_LINGER") [1]
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") [2]
Cc: stable@vger.kernel.org
Reported-by: Lance Tuller <lance@lance0.com>
Closes: https://github.com/lance0/xfr/pull/67
Link: https://github.com/multipath-tcp/packetdrill/pull/196 [3]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-3-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using lock_sock_fast() (atomic context) around sock_set_timestamp()
and sock_set_timestamping() is unsafe, as both helpers can sleep.
Replace lock_sock_fast() with sleepable lock_sock()/release_sock()
to avoid scheduling while atomic panic.
Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260420093343.16443-1-gang.yan@linux.dev
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-2-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both mptcp_setsockopt_sol_socket_tstamp() and
mptcp_setsockopt_sol_socket_timestamping() iterate over subflows,
acquire the subflow socket lock, but then erroneously pass the MPTCP
msk socket to sock_set_timestamp() / sock_set_timestamping() instead
of the subflow ssk. As a result, the timestamp flags are set on the
wrong socket and have no effect on the actual subflows.
Pass ssk instead of sk to both helpers.
Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-1-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a dedicated CONFIG_PPPOX symbol to handle the PPPoX generic module,
avoiding redundant pppox.o definitions in the Makefile.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260428012830.3069-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
netconsole: configfs store callback fixes
There are still some changes I want to make, such as, having the dynamic
lock when reading from configfs (_show() callbacks), wich will solve
other issues, but I will keep it for later.
====================
Link: https://patch.msgid.link/20260427-netconsole_ai_fixes-v2-0-59965f29d9cc@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
userdatum_value_store() updates udm->value first and only then calls
update_userdata() to rebuild the on-the-wire payload. If
update_userdata() fails (e.g. -ENOMEM from kmalloc), the function
returns the error to userspace, but udm->value already holds the new
string while the live nt->userdata buffer still reflects the old one.
The next successful write to any sibling userdatum on the same target
will call update_userdata() again, which walks every entry and packs
the now-stale udm->value into the payload. The failed write is thus
silently activated later, with no indication to userspace that the
value it tried to set was rejected.
Snapshot the previous value before overwriting udm->value and restore
it if update_userdata() fails so the visible state and the active
payload stay consistent.
Fixes: eb83801af2dc ("netconsole: Dynamic allocation of userdata buffer")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260427-netconsole_ai_fixes-v2-4-59965f29d9cc@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_name_store() calls strscpy(nt->np.dev_name, buf, IFNAMSIZ) without
checking the return value. If userspace writes an interface name longer
than IFNAMSIZ - 1, strscpy() silently truncates and returns -E2BIG, but
the function ignores it and reports a fully successful write back to
userspace.
If a real interface happens to match the truncated name, netconsole will
bind to the wrong device on the next enable, sending kernel logs and
panic output to an unintended network segment with no indication to
userspace that anything was rewritten.
Reject writes whose length cannot fit in nt->np.dev_name up front:
if (count >= IFNAMSIZ)
return -ENAMETOOLONG;
This is not a big deal of a problem, but, it is still the correct
approach.
Fixes: 0bcc1816188e57 ("[NET] netconsole: Support dynamic reconfiguration using configfs")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260427-netconsole_ai_fixes-v2-3-59965f29d9cc@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
userdatum_value_store() bounds count by MAX_EXTRADATA_VALUE_LEN (200)
and then copies straight into udm->value, which is itself 200 bytes:
if (count > MAX_EXTRADATA_VALUE_LEN)
return -EMSGSIZE;
...
ret = strscpy(udm->value, buf, sizeof(udm->value));
if (ret < 0)
goto out_unlock;
If userspace writes exactly MAX_EXTRADATA_VALUE_LEN bytes with no NUL
within them, strscpy() copies 199 bytes plus a NUL into udm->value and
returns -E2BIG. The function jumps to out_unlock and reports the error
to userspace, but udm->value has already been overwritten with the
truncated string and update_userdata() is skipped, so the corruption
is not yet visible on the wire.
The next successful write to any userdatum entry under the same target
calls update_userdata(), which packs udm->value into the active
netconsole payload. From that point on, every netconsole message
carries the silently truncated value, and userspace has no indication
that a previous, error-returning write left state behind.
Tighten the entry check from "count > MAX_EXTRADATA_VALUE_LEN" to
"count >= MAX_EXTRADATA_VALUE_LEN". With count strictly less than
sizeof(udm->value), strscpy() can no longer return -E2BIG here, so
the corrupting truncation path is removed entirely.
Fixes: 8a6d5fec6c7f ("net: netconsole: add a userdata config_group member to netconsole_target")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260427-netconsole_ai_fixes-v2-2-59965f29d9cc@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several configfs store callbacks in netconsole end with:
ret = strnlen(buf, count);
This under-reports the number of bytes consumed when the input
contains an embedded NUL within count, telling the VFS that fewer
bytes were written than userspace actually handed in. A conformant
partial-write loop would then retry the trailing bytes against a
callback that has already accepted them.
Every other configfs driver in the tree returns count directly from
its store callbacks once parsing has succeeded, including
drivers/nvme/target/configfs.c, drivers/gpio/gpio-sim.c,
drivers/most/configfs.c, drivers/block/null_blk/main.c,
drivers/pci/endpoint/pci-ep-cfs.c, and the rest of the configfs
users. netconsole was the outlier (along with
drivers/infiniband/core/cma_configfs.c, which has the same latent
issue).
Align netconsole with the rest of the configfs ecosystem: return
count once the parser/validator has accepted the input. The numeric
and boolean parsers (kstrtobool, kstrtou16, mac_pton,
netpoll_parse_ip_addr) have already validated the meaningful prefix;
any trailing bytes are padding and should simply be reported as
consumed.
Fixes: 0bcc1816188e ("[NET] netconsole: Support dynamic reconfiguration using configfs")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260427-netconsole_ai_fixes-v2-1-59965f29d9cc@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net/sched: sch_cake: annotate data-races in cake_dump_stats() (series)
cake_dump_stats() runs without qdisc spinlock being held.
This mini series adds missing READ_ONCE()/WRITE_ONCE() annotations.
Original patch was too big, splitting it eases code review.
====================
Link: https://patch.msgid.link/20260427083606.459355-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cake_dump_stats() runs without qdisc spinlock being held.
In this final patch, I add READ_ONCE()/WRITE_ONCE() annotations
for cparams.target and cparams.interval.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cake_dump_stats() runs without qdisc spinlock being held.
In this fourth patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- avg_peak_bandwidth
- buffer_limit
- buffer_max_used
- avg_netoff
- max_netlen
- max_adjlen
- min_netlen
- min_adjlen
- active_queues
- tin_rate_bps
- bytes
- tin_backlog
Other annotations are added in following patch, to ease code review.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cake_dump_stats() runs without qdisc spinlock being held.
In this third patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- packets
- tin_dropped
- tin_ecn_mark
- ack_drops
- peak_delay
- avge_delay
- base_delay
Other annotations are added in following patches, to ease code review.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cake_dump_stats() runs without qdisc spinlock being held.
In this second patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- bulk_flow_count
- unresponsive_flow_count
- max_skblen
- flow_quantum
Other annotations are added in following patches, to ease code review.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cake_dump_stats() runs without qdisc spinlock being held.
In this first patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- way_hits
- way_misses
- way_collisions
- sparse_flow_count
- decaying_flow_count
Other annotations are added in following patches, to ease code review.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260426165350.1663137-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xin Long says:
====================
sctp: fix a vtag verification failure caused by stale INITs
Similar to Scenario B in commit 8e56b063c865 ( netfilter: handle the
connecting collision properly in nf_conntrack_proto_sctp"):
Scenario B: INIT_ACK is delayed until the peer completes its own handshake
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885]
192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO]
192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] *
There is another case:
Scenario F: INIT is delayed until the peer completes its own handshake
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
(OVS upcall)
192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885]
192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO]
192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK]
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
(delayed)
192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] *
In this case, the delayed INIT (e.g. due to OVS upcall) is recorded by
conntrack, which prevents vtag verification from dropping the unexpected
INIT-ACK in nf_conntrack_sctp_packet():
vtag = ct->proto.sctp.vtag[!dir];
if (!ct->proto.sctp.init[!dir] && vtag && vtag != ih->init_tag)
goto out_unlock;
This happens because ct->proto.sctp.init[!dir] is set by the delayed INIT,
even though it is stale.
Fix this in two parts:
- In netfilter: Do not record INITs whose init_tag matches the peer vtag,
as they carry no new handshake state in the 1st patch.
- In SCTP: Prevent endpoints from responding to such INITs with INIT-ACK,
ensuring correctness even when middleboxes lack the netfilter fix in
the 2nd patch.
A follow-up selftest for this scenario will be posted in a separate patch
by Yi Chen.
====================
Link: https://patch.msgid.link/cover.1777214801.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After an association reaches ESTABLISHED, the peer’s init_tag is already
known from the handshake. Any subsequent INIT with the same init_tag is
not a valid restart, but a delayed or duplicate INIT.
Drop such INIT chunks in sctp_sf_do_unexpected_init() instead of
processing them as new association attempts.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/5788c76c1ee122a3ed00189e88dcf9df1fba226c.1777214801.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An INIT whose init_tag matches the peer's vtag does not provide new state
information. It indicates either:
- a stale INIT (after INIT-ACK has already been seen on the same side), or
- a retransmitted INIT (after INIT has already been recorded on the same
side).
In both cases, the INIT must not update ct->proto.sctp.init[] state, since
it does not advance the handshake tracking and may otherwise corrupt
INIT/INIT-ACK validation logic.
Allow INIT processing only when the conntrack entry is newly created
(SCTP_CONNTRACK_NONE), or when the init_tag differs from the stored peer
vtag.
Note it skips the check for the ct with old_state SCTP_CONNTRACK_NONE in
nf_conntrack_sctp_packet(), as it is just created in sctp_new() where it
set ct->proto.sctp.vtag[IP_CT_DIR_REPLY] = ih->init_tag.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/ee56c3e416452b2a40589a2a85245ac2ad5e9f4b.1777214801.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ab8500_filter_controls[i].private_value is initialized using
.private_value = (unsigned long)&(struct filter_control)
{.count = xcount, .min = xmin, .max = xmax}
thus it's a pointer to a struct filter_control casted to unsigned long.
So to get back that pointer .private_data must be cast back, not its
address.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Signed-off-by: Christian A. Ehrhardt <christian.ehrhardt@codasip.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260428192255.2294705-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of holding RTNL for an arbitrary amount of time,
call register_netdev() for each dummy device created
at module loading time.
Tested:
modprobe dummy numdummies=10000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260427091016.737015-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dev-set and key-rotate netlink operations modify shared device
state (PSP version configuration and cryptographic key material,
respectively) but do not require CAP_NET_ADMIN. The only access
control is psp_dev_check_access() which merely verifies netns
membership.
Fixes: 00c94ca2b99e ("psp: base PSP device support")
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260427195856.401223-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring...
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 6b46ca260e22 ("net: psp: add socket security association code")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260427190606.366101-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) IEEE1394 ARP payload contains no target hardware address in the
ARP packet. Apparently, arp_tables was never updated to deal with
IEEE1394 ARP properly. To deal with this, return no match in case
the target hardware address selector is used, either for inverse or
normal match. Moreover, arpt_mangle disallows mangling of the target
hardware and IP address because, it is not worth to adjust the
offset calculation to fix this, we suspect no users of arp_tables
for this family.
2) Use list_del_rcu() to delete device hooks in nf_tables, this hook
list is RCU protected, concurrent netlink dump readers can be
walking on this list, fix it by adding a helper function and use it
for consistency. From Florian Westphal.
3) Add list_splice_rcu(), this is useful for joining the local list of
new device hooks to the RCU protected hook list in chain and
flowtable. Reviewed by Paul E. McKenney.
4) Use list_splice_rcu() to publish the new device hooks in chain and
flowtable to fix concurrent netlink dump traversal.
5) Add a new hook transaction object to track device hook deletions.
The current approach moves device hooks to be deleted around during
the preparation phase, this breaks concurrent RCU reader via netlink
dump. This new hook transaction is combined with NFT_HOOK_REMOVE
flag to annotate hooks for removal in the preparation phase.
6) xt_policy inbound policy check in strict mode can lead to
out-of-bound access of the secpath array due to incorrect.
The iteration over the secpath needs to be reversed in the inbound
to check for the human readable policy, expecting inner in first
position and outer in second position, the secpath from inbound
actually stores outer in first position then in second position.
From Jiexun Wang.
7) Fix possible zero shift in nft_bitwise triggering UBSAN splat,
reject zero shift from control plane, from Kai Ma.
8) Replace simple_strtoul() in the conntrack SIP helper since it relies
on nul-terminated strings. From Florian Westphal.
* tag 'nf-26-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_sip: don't use simple_strtoul
netfilter: reject zero shift in nft_bitwise
netfilter: xt_policy: fix strict mode inbound policy matching
netfilter: nf_tables: add hook transactions for device deletions
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
rculist: add list_splice_rcu() for private lists
netfilter: nf_tables: use list_del_rcu for netlink hooks
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
====================
Link: https://patch.msgid.link/20260428095840.51961-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark the OTP_MEM registers as volatile so that regcache_sync() will not
attempt to write to them.
These registers hold a constant, and originally they were marked as
readable non-volatile so that this value would be read into the regmap
cache. The problem with this is regcache_sync() issues a write for any
cached register that does not have a reg_default.
Though these registers are constants and writing them in normal use
cannot change OTP, it is illegal for the host to write to them.
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260428115228.158252-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GA100 is a compute-only variant of GA102 that boots GSP-RM like a
Turing, although it also has its own unique requirements.
Now that all the pieces are in place, we can enable GA100 support.
Although architecturally like an Ampere, GA100 uses the same GSP-RM
firmware files as Turing, and therefore must boot it like Turing does.
However, as a compute-only part, GA100 has no display engine.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260417191359.1307434-7-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
The GPU's ROM may begin with an Init-from-ROM (IFR) header that precedes
the PCI Expansion ROM images (VBIOS). When present, the PROM shadow
method must parse this header to determine the offset where the PCI ROM
images actually begin, and adjust all subsequent reads accordingly.
On most GPUs this is not needed because the IFR microcode has already
applied the ROM offset so that PROM reads transparently skip the header.
On GA100, for whatever reason, the IFR offset is not applied to PROM
reads. Therefore, the search for the PCI expansion must skip the IFR
header, if found.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260417191359.1307434-6-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Introduce FbHal method frts_size() to return the size of the FRTS
window. GA100 is a special case in that although there is an
FRTS, its size must arbitrarily be set to 0.
Note that we cannot use supports_display() to determine the FRTS
size because there are other GPUs (e.g. GA102GL) that have display
disabled (and so supports_display() returns False), but the FRTS
window size still needs to be 1MB.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260417191359.1307434-5-ttabi@nvidia.com
[acourbot: apply requested fix to commit message.]
[acourbot: fix minor conflict.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The merge window pulled in the cgroup sub-scheduler infrastructure,
and new AI reviews are accelerating bug reporting and fixing - hence
the larger than usual fixes batch:
- Use-after-frees during scheduler load/unload:
- The disable path could free the BPF scheduler while deferred
irq_work / kthread work was still in flight
- cgroup setter callbacks read the active scheduler outside the
rwsem that synchronizes against teardown
Fix both, and reuse the disable drain in the enable error paths so
the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock
Fix the affected callsites, including recursive parent-into-child
dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounce it through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy:
- helper kfuncs hard-coded the root instead of resolving the
caller's scheduler
- the enable error path tried to disable per-task state that had
never been initialized, and leaked cpus_read_lock on the way
out
- a sysfs object was leaked on every load/unload
- the dispatch fast-path used the root scheduler instead of the
task's
- a couple of CONFIG #ifdef guards were misclassified
- Verifier-time hardening: BPF programs of unrelated struct_ops types
(e.g. tcp_congestion_ops) could call sched_ext kfuncs - a semantic
bug and, once sub-sched was enabled, a KASAN out-of-bounds read.
Now rejected at load. Plus a few NULL and cross-task argument
checks on sched_ext kfuncs, and a selftest covering the new deny.
- rhashtable (Herbert): restore the insecure_elasticity toggle and
bounce the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Move to
per-instance cpumasks, plus a follow-up to skip tasks whose
recorded CPU is stale relative to the new owning runqueue.
- Smaller fixes:
- a dispatch queue's first-task tracking misbehaved when a parked
iterator cursor sat in the list
- the runqueue's next-class wasn't promoted on local-queue
enqueue, leaving an SCX task behind RT in edge cases
- the reference qmap scheduler stopped erroring on legitimate
cross-scheduler task-storage misses"
* tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (26 commits)
sched_ext: Fix scx_flush_disable_work() UAF race
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
sched_ext: Release cpus_read_lock on scx_link_sched() failure in root enable
sched_ext: Reject NULL-sch callers in scx_bpf_task_set_slice/dsq_vtime
sched_ext: Refuse cross-task select_cpu_from_kfunc calls
sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED
sched_ext: Make bypass LB cpumasks per-scheduler
sched_ext: Pass held rq to SCX_CALL_OP() for core_sched_before
sched_ext: Pass held rq to SCX_CALL_OP() for dump_cpu/dump_task
sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP
sched_ext: Use dsq->first_task instead of list_empty() in dispatch_enqueue() FIFO-tail
sched_ext: Resolve caller's scheduler in scx_bpf_destroy_dsq() / scx_bpf_dsq_nr_queued()
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
sched_ext: Don't disable tasks in scx_sub_enable_workfn() abort path
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
sched_ext: Guard scx_dsq_move() against NULL kit->dsq after failed iter_new
sched_ext: Unregister sub_kset on scheduler disable
sched_ext: Defer scx_hardlockup() out of NMI
sched_ext: sync disable_irq_work in bpf_scx_unreg()
sched_ext: Fix local_dsq_post_enq() to use task's scheduler in sub-sched
...
|
|
Convert MediaTek MT6351 Audio CODEC bindings from text format to
YAML schema to enable dtbs_check validation.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428171644.5703-1-manishbaing2789@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
