| Age | Commit message (Collapse) | Author |
|---|
|
The crag6410 board is one of the last users of the gpio-led driver
with plain gpio numbers. The driver has several ways to pass this
information without using gpio numbers, using a lookup table is
the easiest way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260427143546.3098519-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The calculations done to obtain byte_offset can result into a negative
number, fix its type.
This patch fixes the following sparse error:
drivers/input/touchscreen/atmel_mxt_ts.c:1481:44: warning: unsigned value that used to be signed checked against zero?
drivers/input/touchscreen/atmel_mxt_ts.c:1479:49: signed value source
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504-fix-sparse-v1-1-1071137cd280@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining max packet size) instead of open coding.
Note that the device has two bulk endpoints so there is no functional
change here.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
|
|
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
|
|
This is a Sonix SN8P2202XG microcontroller with firmware compatible with
the already supported Northstar 04eb:e004, implementing an MCE IR receiver
(PCB seems to be tracked for a transmitter too but missing related parts).
Found in a Skintek SK-CR-IN+IR ( http://www.skintek.it/SK-CR-IN+IR.php )
internal 3.5 inch USB card reader and MCE receiver combo
(implemented by, and wired as, separate USB devices)
PCB marking: AU6475 966816 STIR REV:A02 MCE
Signed-off-by: Riccardo Boninsegna <rboninsegna2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
|
|
This patch replaces sprintf() with sysfs_emit() to ensure proper
bounds checking. It also simplifies the return logic by directly
returning the error after logging, instead of logging, calling
sprintf(), then returning.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Link: https://patch.msgid.link/20260503201236.29685-1-m32285159@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Clean up an unnecessary space in a conditional statement and move
EXPORT_SYMBOL_GPL(snd_ac97_reset) and EXPORT_SYMBOL(ac97_bus_type)
to immediately follow their respective definitions.
This complies with the Linux kernel coding style convention which
prefers exports to be placed next to the exported symbol for better
code locality and readability.
Signed-off-by: Lucas Poupeau <lucasp.linux@gmail.com>
Link: https://patch.msgid.link/20260504153831.18381-1-lucasp.linux@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Motu 1248 (and probably other older Motu AVB interfaces) take more
than 2 seconds to switch clock. During the clock switching process the
device return that the clock is not valid. This is similar to what
already implemented for the Microbook II interface. Add the Motu
1248 usb id to the existing Motu quirk.
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Link: https://patch.msgid.link/20260504144520.699522-2-nick83ola@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
USB MIDI 2.0 suspend saves the endpoint running state, clears it and
kills all endpoint URBs. Resume restores the running state, but only
restarts input endpoints.
For a running output endpoint, this leaves the endpoint marked running
with an empty URB queue. Output transfer progress depends on either the
rawmidi trigger path starting the queue or an output completion refilling
it. After suspend there is no completion left, and output data that
remains queued in the raw UMP or legacy rawmidi buffer can stay stalled
until userspace happens to trigger the stream again.
Restore the saved state with atomic accessors, keep input endpoints
restarted as before, and restart output endpoints that were running before
suspend. Clear the saved suspend state after restoring it.
Fixes: ff49d1df79ae ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260504-usb-midi2-output-resume-v1-1-c089cc8ad3c6@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This enables the mute and mic-mute LEDs on the HP Envy X360 15-fh0xxx
2-in-1 laptops.
The quirk 'ALC245_FIXUP_HP_ENVY_X360_15_FH0XXX' has been created and
is now enabled for this device.
This is my first patch, and I'm still getting to grips with the code,
so there's probably a better way to implement this fix.
I apologize for any inconvenience caused by the constant release of
new versions of this patch.
Signed-off-by: Fernando Antunez Antonio <fer.antunez24antonio@gmail.com>
Link: https://patch.msgid.link/20260504-hpenvy-muteled-fix-v3-1-5567fd9b3d25@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
JBL Pebbles is a pair of desktop speakers with UAC interface. Its
Playback and Capture mixers use linear volume with val = 0/999/1 and
0/3996/4. Meanwhile, the reported sample rates are truncated to
multiples of 0x100 (i.e., 44100 => 44032), resulting in noisy kmsg, as a
warning message is printed each time a stream is opened.
Add a quirk table entry matching VID/PID=0x05fc/0x0231 and applying
linear volume and sample rate quirk flags, so that it can work properly.
Also note that the volume control knob on device is an incremental
encoder. It does nothing but sends KEY_VOLUMEUP and KEY_VOLUMEDOWN per
rotation, controlling the UAC Playback volume mixer indirectly. Hence,
the linear volume quirk flags also enable the volume control knob to
function properly.
Quirky device sample:
usb 5-1.1: new full-speed USB device number 12 using xhci_hcd
usb 5-1.1: New USB device found, idVendor=05fc, idProduct=0231, bcdDevice= 1.00
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.1: Product: JBL Pebbles
usb 5-1.1: Manufacturer: Harman International Industries
usb 5-1.1: SerialNumber: 1.0.0
usb-storage 5-1.1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 5-1.1:1.0
usb 5-1.1: Found last interface = 1
usb 5-1.1: 2:1: add audio endpoint 0x5
usb 5-1.1: Creating new data endpoint #5
usb 5-1.1: 2:1 Set sample rate 44100, clock 0
usb 5-1.1: current rate 44032 is different from the runtime rate 44100
usb 5-1.1: 3:1: add audio endpoint 0x84
usb 5-1.1: Creating new data endpoint #84
usb 5-1.1: 3:1 Set sample rate 44100, clock 0
usb 5-1.1: current rate 44032 is different from the runtime rate 44100
usb 5-1.1: [2] FU [PCM Playback Switch] ch = 1, val = 0/1/1
usb 5-1.1: Warning! Unlikely big volume step count (=999), linear volume or wrong cval->res?
usb 5-1.1: [2] FU [PCM Playback Volume] ch = 2, val = 0/999/1
usb 5-1.1: [5] FU [Mic Capture Switch] ch = 1, val = 0/1/1
usb 5-1.1: Warning! Unlikely big volume step count (=999), linear volume or wrong cval->res?
usb 5-1.1: [5] FU [Mic Capture Volume] ch = 2, val = 0/3996/4
input: Harman International Industries JBL Pebbles as /devices/pci0000:00/0000:00:08.3/0000:67:00.3/usb5/5-1/5-1.1/5-1.1:1.4/0003:05FC:0231.0018/input/input55
hid-generic 0003:05FC:0231.0018: input,hidraw2: USB HID v2.01 Device [Harman International Industries JBL Pebbles] on usb-0000:67:00.3-1.1/input4
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260504-uac-jbl-pebbles-v1-1-c888d592a286@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
tscm_hwdep_read_queue() copies as many queued control events as fit in
the userspace buffer. When the buffer is smaller than the current
contiguous queue segment, length is rounded down to the number of bytes
that can be copied.
However, after copying that shortened length, the code advances pull_pos
to the original tail_pos, marking the whole contiguous segment as
consumed. Any events between the copied portion and tail_pos are lost.
Limit tail_pos to the position after the entries actually copied before
updating pull_pos. When the whole segment fits, this is equivalent to the
old tail_pos update; when the buffer is smaller, the remaining events
stay queued for the next read.
Fixes: a8c0d13267a4 ("ALSA: firewire-tascam: notify events of change of state for userspace applications")
Cc: stable@vger.kernel.org
Suggested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Co-developed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260503-alsa-firewire-tascam-read-queue-v2-1-126c6efd7642@gmail.com
|
|
The AlphaTheta EUPHONIA (VID 0x2b73, PID 0x0047) is a USB Audio
Class 2 DJ mixer that requires implicit feedback for full-duplex
operation. The capture endpoint (0x83 IN, interface 2) acts as the
implicit feedback source for the playback endpoint (0x03 OUT,
interface 1), and the device firmware does not send isochronous
data on the capture endpoint unless the host is simultaneously
sending data on the playback endpoint, i.e. playback must be
started first.
Without QUIRK_FLAG_PLAYBACK_FIRST the kernel waits for capture URBs
before submitting playback URBs, creating a deadlock: the device
waits for playback data and the host waits for capture data.
Without QUIRK_FLAG_GENERIC_IMPLICIT_FB the kernel does not detect
the implicit feedback relationship between the two interfaces.
The same flag combination is already used for the Behringer UMC202HD,
UMC204HD and UMC404HD (0x1397:0x0507/0x0508/0x0509), which exhibit
the identical implicit-feedback topology.
Tested on Raspberry Pi 5 with kernel 6.12.75; continuous full-duplex
streaming at 96 kHz / 24-bit, zero XRUNs.
Signed-off-by: Anton Swart <anton.swart.jhb@gmail.com>
Link: https://patch.msgid.link/20260503211517.14332-1-anton.swart.jhb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove unnecessary blank line after the opening brace of a for loop.
This fixes the following checkpatch.pl warning:
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Moksh Panicker <mokshpanicker.7@gmail.com>
Link: https://patch.msgid.link/20260504142812.21964-4-mokshpanicker.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove three commented-out lines of dead code that are never executed.
Keeping commented-out code is discouraged as it clutters the codebase
and serves no purpose.
Signed-off-by: Moksh Panicker <mokshpanicker.7@gmail.com>
Link: https://patch.msgid.link/20260504142812.21964-3-mokshpanicker.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Braces are not necessary for single statement blocks.
This fixes the following checkpatch.pl warning:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Moksh Panicker <mokshpanicker.7@gmail.com>
Link: https://patch.msgid.link/20260504142812.21964-2-mokshpanicker.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix several spelling mistakes in comments in the rtl8723bs staging
driver.
No functional changes.
Signed-off-by: Aidan Russell <aidanlrussell@gmail.com>
Reviewed-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260503155043.15936-1-aidanlrussell@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove this file and several enumerations from it, as they are not used
anywhere in the driver code.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-11-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the empty 'struct hal_version' as all its fields were removed
earlier and it is no longer needed.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-10-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'chip_normal' field is the only remaining member of the 'struct
hal_version' that is used.
Move this field to the hal_com_data struct, where other chip information
is already stored. The order of assignments and reads to this variable
remains unchanged. This is purely a data relocation patch.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-9-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'ROMVer' field of 'sturct hal_version' never used anywhere in the
driver, so remove it to eliminate unused code.
Remove the related call to rtw_read32(), the result of which is only
used for 'ROMVer' and is no longer needed.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-8-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the 'CUTVersion' field from 'struct hal_version', which is read
during initialization but is never used anywhere in the driver.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-7-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'VendorType' field of the 'struct hal_version' is set once when the
chip is initialized, but no one ever reads this data, so remove it to
eliminate unused code.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-6-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the unused 'ICType' field from the 'struct hal_version', as it
always takes a single value (CHIP_8723B) upon initialization and is
never used in driver.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-5-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove macros that are wrappers over the fields of 'struct hal_version'
and are never used in driver code.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-4-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'chip_type' field always accepts one value from the
hal_chip_type_e enumeration: TEST_CHIP or NORMAL_CHIP (FPGA is never
used).
Changing this field's type to bool will allow it to be used directly in
conditions without the need for wrapped macros.
The new type requires a corresponding variable name, so rename it to
'chip_normal' to improve code readability.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-3-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename 'ChipType' field to 'chip_type' to comply with Linux kernel
coding style and fix checkpatch.pl warning.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502220056.59815-2-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix inconsistent brace usage in if/else blocks to improve readability
and avoid misleading indentation.
No functional changes.
Signed-off-by: Siwanan Bungtong <horstaufmental@gmail.com>
Reviewed-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260501205336.230955-1-horstaufmental@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tda998x_edid_read() returns a const struct drm_edid pointer, but when
tda998x_edid_delay_wait() fails (process killed while waiting for the
HPD timeout), the integer literal 0 is returned instead of NULL,
triggering a sparse warning: "Using plain integer as NULL pointer"
Replace 0 with NULL to fix the sparse warning.
Fixes: c76a8be4feec ("drm/bridge: tda998x: Add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604172257.Imo6GOH9-lkp@intel.com/
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260417155446.1068893-1-kory.maincent@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Add missing braces to if/else statements to comply with kernel
coding style and improve readability.
No functional changes.
Signed-off-by: Siwanan Bungtong <horstaufmental@gmail.com>
Link: https://patch.msgid.link/20260501203121.227992-3-horstaufmental@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Wrap lines exceeding 100 characters to improve code readability
and conform to the Linux kernel coding style. This fixes the
LONG_LINE issues identified by checkpatch.pl.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-9-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix alignment of continued conditions to improve code readability
and conform to the Linux kernel coding style. This fixes the
PARENTHESIS_ALIGNMENT issues identified by checkpatch.pl.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-8-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move logical operators to the previous line to improve code
readability and conform to the Linux kernel coding style.
This fixes the LOGICAL_CONTINUATIONS issues identified by
checkpatch.pl.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-7-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove redundant curly braces for single-statement block to improve
code readability and conform to the Linux kernel coding style.
This fixes the BRACES issue identified by checkpatch.pl.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-6-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add spaces around bitwise OR operators to improve code readability
and conform to the Linux kernel coding style. This fixes the
SPACING issues identified by checkpatch.pl.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-5-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify boolean comparisons to improve readability
and conform to the Linux kernel coding style.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-4-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify boolean comparisons to improve readability
and conform to the Linux kernel coding style.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-3-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify boolean comparisons to improve readability
and conform to the Linux kernel coding style.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260427175846.23470-2-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the multi-line block comment at the top of the file to follow
the kernel coding style: each continuation line should start with
' * ' and the closing '*/' should be on its own line without a
preceding blank line.
This fixes the following checkpatch.pl warning:
WARNING: Block comments should align the * on each line
Signed-off-by: Francisco Maestre <francisco@maestretorreblanca.com>
Link: https://patch.msgid.link/20260503005802.69046-1-francisco@maestretorreblanca.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop a blank line before a close brace in rtw_get_wapi_ie(),
flagged by checkpatch.pl:
CHECK: Blank lines aren't necessary before a close brace '}'
No functional change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://patch.msgid.link/20260502085018.1440-1-sozdayvek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop blank lines flagged by checkpatch.pl in rtw_ioctl_set.c:
CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Blank lines aren't necessary after an open brace '{'
No functional change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260502084930.857-1-sozdayvek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename function DisableInterrupt8723BSdio() to
rtw_sdio_disable_interrupt() and format its description to comply with
Linux kernel coding style.
Declare this function without 'extern' prototype in the .h file to fix
checkpatch.pl warning.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260430172954.12828-3-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary wrapper and call DisableInterrupt8723BSdio() function
directly to simplify the code.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260430172954.12828-2-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl warnings regarding explicit comparisons to NULL.
The kernel coding style prefers the shorter if (!ptr) idiom over
if (ptr == NULL). Clean up the inline functions in rtw_recv.h to
match this standard.
Signed-off-by: Abhai Kollara <abhai@protonmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260430201158.2807823-1-abhai@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function fbtft_write_gpio16_wr_latched is not referenced anywhere
in the driver and only contains a stub implementation.
Remove it from the driver.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260430102529.25019-1-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renames rtw_btcoex_LPS_Leave to rtw_btcoex_lps_leave in order to conform
to kernel code style.
Found using checkpatch.pl.
Signed-off-by: Linus Probert <linus.probert@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260427173857.585742-9-linus.probert@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renames rtw_btcoex_LPS_Enter to rtw_btcoex_lps_enter in order to conform
to kernel code style.
Found using checkpatch.pl.
Signed-off-by: Linus Probert <linus.probert@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260427173857.585742-8-linus.probert@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renames rtw_btcoex_RejectApAggregatedPacket to
rtw_btcoex_reject_ap_aggregated_packet in order to conform to kernel
code style.
Found using checkpatch.pl.
Signed-off-by: Linus Probert <linus.probert@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260427173857.585742-7-linus.probert@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renames function rtw_btcoex_HaltNotify to rtw_btcoex_halt_notify in
order to conform to kernel code style.
Found using checkpatch.pl.
Signed-off-by: Linus Probert <linus.probert@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260427173857.585742-6-linus.probert@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renames rtw_btcoex_media_status_notify_definition argument mediaStatus
to media_status in order to conform to kernel code style.
This was found using checkpatch.pl
Signed-off-by: Linus Probert <linus.probert@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260427173857.585742-5-linus.probert@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
