| Age | Commit message (Collapse) | Author |
|---|
|
The CAN bus support enabled with CONFIG_CAN provides a socket-based
access to CAN interfaces. With the introduction of the latest CAN protocol
CAN XL additional configuration status information needs to be exposed to
the network layer than formerly provided by standard Linux network drivers.
This requires the CAN driver infrastructure to be selected by default.
As the CAN network layer can only operate on CAN interfaces anyway all
distributions and common default configs enable at least one CAN driver.
So selecting CONFIG_CAN_DEV when CONFIG_CAN is selected by the user has
no effect on established configurations but solves potential build issues
when CONFIG_CAN[_XXX]=y is set together with CANFIG_CAN_DEV=m
Fixes: 1a620a723853 ("can: raw: instantly reject unsupported CAN frames")
Reported-by: Vincent Mailhol <mailhol@kernel.org>
Closes: https://lore.kernel.org/all/CAMZ6RqL_nGszwoLPXn1Li8op-ox4k3Hs6p=Hw6+w0W=DTtobPw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511280531.YnWW2Rxc-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511280842.djCQ0N0O-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511282325.uVQFRTkA-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511291520.guIE1QHj-lkp@intel.com/
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251129090500.17484-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Owing to Config4.MMUSizeExt and VTLB/FTLB MMU features later MIPSr2+
cores can have more than 64 TLB entries. Therefore allocate an array
for uniquification instead of placing too an small array on the stack.
Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Co-developed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.17+: 9f048fa48740: MIPS: mm: Prevent a TLB shutdown on initial uniquification
Cc: stable@vger.kernel.org # v6.17+
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.19-rc1
- add new compatible for Belling BL24S64
|
|
The function detect_stream_formats() reads the stream_count value directly
from a FireWire device without validating it. This can lead to
out-of-bounds writes when a malicious device provides a stream_count value
greater than MAX_STREAMS.
Fix by applying the same validation to both TX and RX stream counts in
detect_stream_formats().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 58579c056c1c ("ALSA: dice: use extended protocol to detect available stream formats")
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881B043FC68B4C0DA40B73DAFDCA@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
strncpy() is deprecated [1] for NUL-terminated destination buffers
because it does not guarantee NUL termination. Replace it with strscpy()
to ensure the destination buffer is always NUL-terminated and to avoid
any additional NUL padding.
Although the identifier buffer has 252 usable bytes, strncpy() copied
only up to 251 bytes to the zero-initialized buffer, relying on the last
byte to act as an implicit NUL terminator. Switching to strscpy() avoids
this implicit behavior and does not use magic numbers.
The source string is also NUL-terminated and satisfies the
__must_be_cstr() requirement of strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251126220804.102160-2-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails.
Fixes: 248f6571fd4c5 ("netpoll: Optimize skb refilling on critical path")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251127-netpoll_fix_init_work-v1-1-65c07806d736@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
0) Add sanity check for maximum encapsulations in bridge vlan,
reported by the new AI robot.
1) Move the flowtable path discovery code to its own file, the
nft_flow_offload.c mixes the nf_tables evaluation with the path
discovery logic, just split this in two for clarity.
2) Consolidate flowtable xmit path by using dev_queue_xmit() and the
real device behind the layer 2 vlan/pppoe device. This allows to
inline encapsulation. After this update, hw_ifidx can be removed
since both ifidx and hw_ifidx now point to the same device.
3) Support for IPIP encapsulation in the flowtable, extend selftest
to cover for this new layer 3 offload, from Lorenzo Bianconi.
4) Push down the skb into the conncount API to fix duplicates in the
conncount list for packets with non-confirmed conntrack entries,
this is due to an optimization introduced in d265929930e2
("netfilter: nf_conncount: reduce unnecessary GC").
From Fernando Fernandez Mancera.
5) In conncount, disable BH when performing garbage collection
to consolidate existing behaviour in the conncount API, also
from Fernando.
6) A matching packet with a confirmed conntrack invokes GC if
conncount reaches the limit in an attempt to release slots.
This allows the existing extensions to be used for real conntrack
counting, not just limiting new connections, from Fernando.
7) Support for updating ct count objects in nf_tables, from Fernando.
8) Extend nft_flowtables.sh selftest to send IPv6 TCP traffic,
from Lorenzo Bianconi.
9) Fixes for UAPI kernel-doc documentation, from Randy Dunlap.
* tag 'nf-next-25-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: improve UAPI kernel-doc comments
netfilter: ip6t_srh: fix UAPI kernel-doc comments format
selftests: netfilter: nft_flowtable.sh: Add the capability to send IPv6 TCP traffic
netfilter: nft_connlimit: add support to object update operation
netfilter: nft_connlimit: update the count if add was skipped
netfilter: nf_conncount: make nf_conncount_gc_list() to disable BH
netfilter: nf_conncount: rework API to use sk_buff directly
selftests: netfilter: nft_flowtable.sh: Add IPIP flowtable selftest
netfilter: flowtable: Add IPIP tx sw acceleration
netfilter: flowtable: Add IPIP rx sw acceleration
netfilter: flowtable: use tuple address to calculate next hop
netfilter: flowtable: remove hw_ifidx
netfilter: flowtable: inline pppoe encapsulation in xmit path
netfilter: flowtable: inline vlan encapsulation in xmit path
netfilter: flowtable: consolidate xmit path
netfilter: flowtable: move path discovery infrastructure to its own file
netfilter: flowtable: check for maximum number of encapsulations in bridge vlan
====================
Link: https://patch.msgid.link/20251128002345.29378-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Introduce the dsa_xmit_port_mask() tagging protocol helper
What
----
Some DSA tags have just the port number in the TX header format, others
have a bit field where in theory, multiple bits can be set, even though
DSA only sets one.
The latter kind is now making use of a dsa_xmit_port_mask() helper,
which will decide when to set more than 1 bit in that mask.
Why
---
David Yang has pointed out in a recently posted patch that HSR packet
duplication on transmission can be offloaded even on HSR-unaware
switches. This should be made generally available to all DSA switches.
How to test
-----------
These patches just lay the groundwork, and there should be no functional
change - so for this set, regression testing is all that's necessary.
For testing the HSR packet duplication idea, I've put together a branch:
https://github.com/vladimiroltean/linux/commits/dsa-simple-hsr-offload/
where most drivers are patched to call dsa_port_simple_hsr_join() and
dsa_port_simple_hsr_leave().
Assuming there are volunteers to also test the latter, one can enable
CONFIG_HSR and create a HSR device using:
$ ip link add name hsr0 type hsr slave1 swp0 slave2 swp1 supervision 45 version 1
This needs to be connected using 2 cables to another system where the
same command was run. Then, one should be able to ping the other board
through the hsr0 interface.
Without the Github branch, a ping over HSR should increase the DSA
conduit interface's TX counters by 2 packets. With the Github branch,
the TX counters should increase by only 1 packet.
Why so many patches
-------------------
To avoid the situation where a patch has to be backported, conflicts
with the work done here, pulls this in as a dependency, and that pulls
in 13 other unrelated drivers. These don't have any dependencies between
each other and can be cherry-picked at will (except they all depend on
patch 1/15).
====================
Link: https://patch.msgid.link/20251127120902.292555-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "yt921x" tagging protocol populates a bit mask for the TX ports,
so we can use dsa_xmit_port_mask() to centralize the decision of how to
set that field.
Cc: David Yang <mmyangfl@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-16-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "xrs700x" is the original DSA tagging protocol with HSR TX
replication support, we now essentially move that logic to the
dsa_xmit_port_mask() helper. The end result is something akin to
hellcreek_xmit() (but reminds me I should also take care of
skb_checksum_help() for tail taggers in the core).
The implementation differences to dsa_xmit_port_mask() are immaterial.
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-15-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "trailer" tagging protocol populates a bit mask for the TX ports, so
we can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-14-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "a5psw" tagging protocol populates a bit mask for the TX ports,
so we can use dsa_xmit_port_mask() to centralize the decision of how to
set that field.
Cc: "Clément Léger" <clement.leger@bootlin.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "rtl8_4" and "rtl8_4t" tagging protocols populate a bit mask for the
TX ports, so we can use dsa_xmit_port_mask() to centralize the decision
of how to set that field.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "rtl4a" tagging protocol populates a bit mask for the TX ports,
so we can use dsa_xmit_port_mask() to centralize the decision of how to
set that field.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "qca" tagging protocol populates a bit mask for the TX ports, so we
can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "ocelot" and "seville" tagging protocols populate a bit mask for the
TX ports, so we can use dsa_xmit_port_mask() to centralize the decision
of how to set that field.
This protocol used BIT_ULL() rather than simple BIT() to silence Smatch,
as explained in commit 1f778d500df3 ("net: mscc: ocelot: avoid type
promotion when calling ocelot_ifh_set_dest"). I would expect that this
tool no longer complains now, when the BIT(dp->index) is hidden inside
the dsa_xmit_port_mask() function, the return value of which is promoted
to u64.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "gsw1xx" tagging protocol populates a bit mask for the TX ports, so
we can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "mtk" tagging protocol populates a bit mask for the TX ports, so we
can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Cc: Chester A. Unal" <chester.a.unal@arinc9.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "ksz8795", "ksz9893", "ksz9477" and "lan937x" tagging protocols
populate a bit mask for the TX ports.
Unlike the others, "ksz9477" also accelerates HSR packet duplication.
Make the HSR duplication logic available generically to all 4 taggers by
using the dsa_xmit_port_mask() function to set the TX port mask.
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "hellcreek" tagging protocol populates a bit mask for the TX ports,
so we can use dsa_xmit_port_mask() to centralize the decision of how to
set that field.
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "gswip" tagging protocol populates a bit mask for the TX ports, so
we can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "brcm" and "brcm-prepend" tagging protocols populate a bit mask for
the TX ports, so we can use dsa_xmit_port_mask() to centralize the
decision of how to set that field. The port mask is written u8 by u8,
first the high octet and then the low octet.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many tagging protocols deal with the transmit port mask being a bit
mask, and set it to BIT(dp->index). Not a big deal.
Also, some tagging protocols are written for switches which support HSR
offload (including packet duplication offload), there we see a walk
using dsa_hsr_foreach_port() to find the other port in the same switch
that's member of the HSR, and set that bit in the port mask too.
That isn't sufficiently interesting either, until you come to realize
that there isn't anything special in the second case that switches just
in the first one can't do too.
It just becomes a matter of "is it wise to do it? are sufficient people
using HSR/PRP with generic off-the-shelf switches to justify add an
extra test in the data path?" - the answer to which is probably "it
depends". It isn't _much_ worse to not have HSR offload at all, so as to
make it impractical, esp. with a rich OS like Linux. But the HSR users
are rather specialized in industrial networking.
Anyway, the change acts on the premise that we're going to have support
for this, it should be uniformly implemented for everyone, and that if
we find some sort of balance, we can keep everyone relatively happy.
So I've disabled that logic if CONFIG_HSR isn't enabled, and I've tilted
the branch predictor to say it's unlikely we're transmitting through a
port with this capability currently active. On branch miss, we're still
going to save the transmission of one packet, so there's some remaining
benefit there too. I don't _think_ we need to jump to static keys yet.
The helper returns a 32-bit zero-based unsigned number, that callers
have to transpose using FIELD_PREP(). It is not the first time we assume
DSA switches won't be larger than 32 ports - dsa_user_ports() has that
assumption baked into it too.
One last development note about why pass the "skb" argument when this
isn't used. Looking at the compiled code on arm64, which is identical
both with and without it, the answer is "why not?" - who knows what
other features dependent on the skb may be handled in the future.
Link: https://lore.kernel.org/netdev/20251126093240.2853294-4-mmyangfl@gmail.com/
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Cc: Chester A. Unal" <chester.a.unal@arinc9.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: David Yang <mmyangfl@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
net: broadcom: migrate to .get_rx_ring_count() ethtool callback
This series migrates Broadcom ethernet drivers to use the new
.get_rx_ring_count() ethtool callback introduced in commit 84eaf4359c36
("net: ethtool: add get_rx_ring_count callback to optimize RX ring
queries").
This change simplifies the .get_rxnfc() implementation by
extracting the ETHTOOL_GRXRINGS case handling into a dedicated callback,
making the code cleaner and aligning these drivers with the updated
ethtool API.
The series covers two Broadcom drivers: bnxt and bcmgenet. Each patch
removes the ETHTOOL_GRXRINGS case from the driver's .get_rxnfc() switch
statement and implements the new .get_rx_ring_count() callback that
returns the number of RX rings.
====================
Link: https://patch.msgid.link/20251127-grxrings_broadcom-v1-0-b0b182864950@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 84eaf4359c36 ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns bcmgenet with the
new ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251127-grxrings_broadcom-v1-2-b0b182864950@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 84eaf4359c36 ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns bnxt with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251127-grxrings_broadcom-v1-1-b0b182864950@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Donald Hunter says:
====================
tools: ynl: add schema checking
Add schema checking and yaml linting for the YNL specs.
Patch 1 adds a schema_check make target using a pyynl --validate option
Patch 2 adds a lint make target using yamllint
Patches 3,4 fix issues reported by make -C tools/net/ynl lint schema_check
====================
Link: https://patch.msgid.link/20251127123502.89142-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix two schema check errors that have lurked since the attribute name
validation was made more strict:
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
not ok 13 nftables.yaml schema validation
'set id' does not match '^[0-9a-z-]+$'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix warning reported by yamllint:
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a lint target to run yamllint on the YNL specs.
make -C tools/net/ynl lint
make: Entering directory '/home/donaldh/net-next/tools/net/ynl'
yamllint ../../../Documentation/netlink/specs/*.yaml
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
make: Leaving directory '/home/donaldh/net-next/tools/net/ynl'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a --validate flag to pyynl for explicit schema check with error
reporting and add a schema_check make target to check all YNL specs.
make -C tools/net/ynl schema_check
make: Entering directory '/home/donaldh/net-next/tools/net/ynl'
ok 1 binder.yaml schema validation
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
Failed validating 'pattern' in schema['properties']['attribute-sets']['items']['properties']['attributes']['items']['properties']['name']:
{'type': 'string', 'pattern': '^[0-9a-z-]+$'}
On instance['attribute-sets'][14]['attributes'][22]['name']:
'labels mask'
ok 3 devlink.yaml schema validation
[...]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, if NVMEM provider is probed later than Aquantia, loading the
firmware will fail with -EINVAL.
To fix this, simply check for -EPROBE_DEFER when NVMEM is attempted and
return it.
Fixes: e93984ebc1c8 ("net: phy: aquantia: add firmware load support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251127114514.460924-1-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark inodes without acls with cache_no_acl() in __ext4_iget() so that
path lookup can run in RCU mode from the start. This is interesting in
particular for the case where the file owner does the lookup because in
that case end up constantly hitting the slow path otherwise. We drop out
from the fast path (because ACL state is unknown) but never end up calling
check_acl() to cache ACL state.
The problem was originally analyzed by Linus and fix tested by Matheusz,
I'm just putting it into mergeable form :).
Link: https://lore.kernel.org/all/CAHk-=whSzc75TLLPWskV0xuaHR4tpWBr=LduqhcCFr4kCmme_w@mail.gmail.com
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20251125101340.24276-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since block device (See commit 3c20917120ce ("block/bdev: enable large
folio support for large logical block sizes")) and page cache (See commit
ab95d23bab220ef8 ("filemap: allocate mapping_min_order folios in the page
cache")) has the ability to have a minimum order when allocating folio,
and ext4 has supported large folio in commit 7ac67301e82f ("ext4: enable
large folio for regular file"), now add support for block_size > PAGE_SIZE
in ext4.
set_blocksize() -> bdev_validate_blocksize() already validates the block
size, so ext4_load_super() does not need to perform additional checks.
Here we only need to add the FS_LBS bit to fs_flags.
In addition, block sizes larger than the page size are currently supported
only when CONFIG_TRANSPARENT_HUGEPAGE is enabled. To make this explicit,
a blocksize_gt_pagesize entry has been added under /sys/fs/ext4/feature/,
indicating whether bs > ps is supported. This allows mke2fs to check the
interface and determine whether a warning should be issued when formatting
a filesystem with block size larger than the page size.
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-25-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Supporting a block size greater than the page size (BS > PS) requires
support for large folios. However, several features (e.g., encrypt)
do not yet support large folios.
To prevent conflicts, this patch adds checks at mount time to prohibit
these features from being used when BS > PS. Since these features cannot
be changed on remount, there is no need to check on remount.
This patch adds s_max_folio_order, initialized during mount according to
filesystem features and mount options. If s_max_folio_order is 0, large
folios are disabled.
With this in place, ext4_set_inode_mapping_order() can be simplified by
checking s_max_folio_order, avoiding redundant checks.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-24-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Eric Biggers already added support for verifying data from large folios
several years ago in commit 5d0f0e57ed90 ("fsverity: support verifying
data from large folios").
With ext4 now supporting large block sizes, the fs-verity tests
`kvm-xfstests -c ext4/64k -g verity -x encrypt` pass without issues.
Therefore, remove the restriction and allow large folios to be enabled
together with fs-verity.
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-23-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, ext4_set_inode_mapping_order() does not set max folio order
for files with the data journalling flag. For files that already have
large folios enabled, ext4_inode_journal_mode() ignores the data
journalling flag once max folio order is set.
This is not because data journalling cannot work with large folios, but
because credit estimates will go through the roof if there are too many
blocks per folio.
Since the real constraint is blocks-per-folio, to support data=journal
under LBS, we now set max folio order to be equal to min folio order for
files with the journalling flag. When LBS is disabled, the max folio order
remains unset as before.
Therefore, before ext4_change_inode_journal_flag() switches the journalling
mode, we call truncate_pagecache() to drop all page cache for that inode,
and filemap_write_and_wait() is called unconditionally.
After that, once the journalling mode has been switched, we can safely
reset the inode mapping order, and the mapping_large_folio_support() check
in ext4_inode_journal_mode() can be removed.
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-22-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the EXT4_PG_TO_LBLK() macro to convert folio indexes to blocks to avoid
negative left shifts after supporting blocksize greater than PAGE_SIZE.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-21-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the EXT4_PG_TO_LBLK/EXT4_LBLK_TO_PG macros to complete the conversion
between folio indexes and blocks to avoid negative left/right shifts after
supporting blocksize greater than PAGE_SIZE.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-20-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the EXT4_PG_TO_LBLK/EXT4_LBLK_TO_PG macros to complete the conversion
between folio indexes and blocks to avoid negative left/right shifts after
supporting blocksize greater than PAGE_SIZE.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-19-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the EXT4_PG_TO_LBLK() macro to convert folio indexes to blocks to avoid
negative left shifts after supporting blocksize greater than PAGE_SIZE.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-18-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the EXT4_PG_TO_LBLK() macro to convert folio indexes to blocks to avoid
negative left shifts after supporting blocksize greater than PAGE_SIZE.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-17-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ext4 multi-block allocator now fully supports folio objects. Update
all variable names, function names, and comments to replace legacy 'page'
terminology with 'folio', improving clarity and consistency.
No functional changes.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-16-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We use EXT4_BAD_INO for the buddy cache inode number. This inode is not
accessed via __ext4_new_inode() or __ext4_iget(), meaning
ext4_set_inode_mapping_order() is not called to set its folio order range.
However, future block size greater than page size support requires this
inode to support large folios, and the buddy cache code already handles
BS > PS. Therefore, ext4_set_inode_mapping_order() is now explicitly
called for this specific inode to set its folio order range.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-15-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, ext4_mb_init_cache() uses blocks_per_page to calculate the
folio index and offset. However, when blocksize is larger than PAGE_SIZE,
blocks_per_page becomes zero, leading to a potential division-by-zero bug.
Since we now have the folio, we know its exact size. This allows us to
convert {blocks, groups}_per_page to {blocks, groups}_per_folio, thus
supporting block sizes greater than page size.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-14-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, ext4_mb_get_buddy_page_lock() uses blocks_per_page to calculate
folio index and offset. However, when blocksize is larger than PAGE_SIZE,
blocks_per_page becomes zero, leading to a potential division-by-zero bug.
To support BS > PS, use bytes to compute folio index and offset within
folio to get rid of blocks_per_page.
Also, since ext4_mb_get_buddy_page_lock() already fully supports folio,
rename it to ext4_mb_get_buddy_folio_lock().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-13-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, ext4_mb_load_buddy_gfp() uses blocks_per_page to calculate the
folio index and offset. However, when blocksize is larger than PAGE_SIZE,
blocks_per_page becomes zero, leading to a potential division-by-zero bug.
To support BS > PS, use bytes to compute folio index and offset within
folio to get rid of blocks_per_page.
Also, if buddy and bitmap land in the same folio, we get that folio’s ref
instead of looking it up again before updating the buddy.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-12-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As BS > PS support is coming, all block number to page index (and
vice-versa) conversions must now go via bytes. Added EXT4_LBLK_TO_PG()
and EXT4_PG_TO_LBLK() macros to simplify these conversions and handle
both BS <= PS and BS > PS scenarios cleanly.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-11-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251121090654.631996-10-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
