| Age | Commit message (Collapse) | Author |
|---|
|
Commit 965930962a41 ("drm/i915/frontbuffer: Fix intel_frontbuffer
lifetime handling") dropped the last xe display users of the
headers. They're still used in intel_overlay.c, but it's not built as
part of xe.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251201171050.2145833-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This typo caused debugfs to always behave as if
CONFIG_DEBUG_FS_ALLOW_NONE was selected.
Fixes: f278809475f6 ("debugfs: Remove broken no-mount mode")
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://patch.msgid.link/20251202070927.14198-1-dev@null.aaront.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no implementations of fb_debug_enter and fb_debug_leave.
Remove the callbacks from struct fb_ops and clean up the caller.
The field save_graphics in fbcon_par is also no longer required.
Remove it as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-6-tzimmermann@suse.de
|
|
Remove the debug_enter/debug_leave helpers, as there are no DRM
drivers supporting debugging with kgdb. Remove code to keep track
of existing fbdev-emulation state. None of this required any longer.
Also remove mode_set_base_atomic from struct drm_crtc_helper_funcs,
which has no callers or implementations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-5-tzimmermann@suse.de
|
|
Remove the implementation of the CRTC helper mode_set_base_atomic
from radeon. It pretends to provide mode setting for kdb debugging,
but has been broken for some time.
Kdb output has been supported only for non-atomic mode setting since
commit 9c79e0b1d096 ("drm/fb-helper: Give up on kgdb for atomic drivers")
from 2017.
While radeon provides non-atomic mode setting, kdb assumes that the GEM
buffer object is at a fixed location in video memory. This assumption
currently blocks radeon from converting to generic fbdev emulation.
Fbdev-ttm helpers use a shadow buffer with a movable GEM buffer object.
Triggering kdb does therefore not update the display.
Another problem is that the current implementation does not handle
USB keyboard input. Therefore a serial terminal is required. Then when
continuing from the debugger, radeon fails with an error:
[7]kdb> go
[ 40.345523][ C7] BUG: scheduling while atomic: bash/1580/0x00110003
[...]
[ 40.345613][ C7] schedule+0x27/0xd0
[ 40.345615][ C7] schedule_timeout+0x7b/0x100
[ 40.345617][ C7] ? __pfx_process_timeout+0x10/0x10
[ 40.345619][ C7] msleep+0x31/0x50
[ 40.345621][ C7] radeon_crtc_load_lut+0x2e4/0xcb0 [radeon 31c1ee785de120fcfd0babcc09babb3770252b4e]
[ 40.345698][ C7] radeon_crtc_gamma_set+0xe/0x20 [radeon 31c1ee785de120fcfd0babcc09babb3770252b4e]
[ 40.345760][ C7] drm_fb_helper_debug_leave+0xd8/0x130
[ 40.345763][ C7] kgdboc_post_exp_handler+0x54/0x70
[...]
and the system hangs.
Support for kdb feels pretty much broken. Hence remove the whole kdb
support from radeon.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-4-tzimmermann@suse.de
|
|
Remove the implementation of the CRTC helper mode_set_base_atomic
from nouveau. It pretends to provide mode setting for kdb debugging,
but has been broken for some time.
Kdb output has been supported only for non-atomic mode setting since
commit 9c79e0b1d096 ("drm/fb-helper: Give up on kgdb for atomic drivers")
from 2017.
While nouveau provides non-atomic mode setting for some devices, kdb
assumes that the GEM buffer object is at a fixed location in video
memory. This has not been the case since
commit 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
from 2022. Fbdev-ttm helpers use a shadow buffer with a movable GEM
buffer object. Triggering kdb does therefore not update the display.
Hence remove the whole kdb support from nouveau.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-3-tzimmermann@suse.de
|
|
Remove all implementations of the CRTC helper mode_set_base_atomic
from amdgpu. It pretends to provide mode setting for kdb debugging,
but has been broken for some time.
Kdb output has been supported only for non-atomic mode setting since
commit 9c79e0b1d096 ("drm/fb-helper: Give up on kgdb for atomic drivers")
from 2017.
While amdgpu provides non-atomic mode setting for some devices, kdb
assumes that the GEM buffer object is at a fixed location in video
memory. This has not been the case since commit 087451f372bf ("drm/amdgpu:
use generic fb helpers instead of setting up AMD own's.") from 2021.
Fbdev-ttm helpers use a shadow buffer with a movable GEM buffer object.
Triggering kdb does not update the display.
Hence remove the whole kdb support from amdgpu.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-2-tzimmermann@suse.de
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
|
|
Recently we received a new helper function,
usb_endpoint_max_periodic_payload(), for calculating the max packet
size for periodic transfer.
Simplify the former open code with the new helper function.
Fixes: a748e1dbb2df ("ALSA: usb-audio: Fix max bytes-per-interval calculation")
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://lore.kernel.org/20251124210518.90054-1-dylan_robinson@motu.com
Link: https://patch.msgid.link/20251202070828.145656-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
More HP laptops with codec ALC3247 need the extra coefbit2 to make
mic-mute/audio-mute working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20251202042534.174755-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert to use __free to tidy up the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/62854e2fcb8f8dd2180a98a9700702dcf89a6980.1763370183.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Convert to use lock guard to tidy up the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/dbefeb868093c40d4b29fd6b57294a6aa011b719.1763370183.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull bug handling infrastructure updates from Ingo Molnar:
"Core updates:
- Improve WARN(), which has vararg printf like arguments, to work
with the x86 #UD based WARN-optimizing infrastructure by hiding the
format in the bug_table and replacing this first argument with the
address of the bug-table entry, while making the actual function
that's called a UD1 instruction (Peter Zijlstra)
- Introduce the CONFIG_DEBUG_BUGVERBOSE_DETAILED Kconfig switch (Ingo
Molnar, s390 support by Heiko Carstens)
Fixes and cleanups:
- bugs/s390: Remove private WARN_ON() implementation (Heiko Carstens)
- <asm/bugs.h>: Make i386 use GENERIC_BUG_RELATIVE_POINTERS (Peter
Zijlstra)"
* tag 'core-bugs-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Make i386 use GENERIC_BUG_RELATIVE_POINTERS
x86/bug: Fix BUG_FORMAT vs KASLR
x86_64/bug: Inline the UD1
x86/bug: Implement WARN_ONCE()
x86_64/bug: Implement __WARN_printf()
x86/bug: Use BUG_FORMAT for DEBUG_BUGVERBOSE_DETAILED
x86/bug: Add BUG_FORMAT basics
bug: Allow architectures to provide __WARN_printf()
bug: Implement WARN_ON() using __WARN_FLAGS()
bug: Add report_bug_entry()
bug: Add BUG_FORMAT_ARGS infrastructure
bug: Clean up CONFIG_GENERIC_BUG_RELATIVE_POINTERS
bug: Add BUG_FORMAT infrastructure
x86: Rework __bug_table helpers
bugs/s390: Remove private WARN_ON() implementation
bugs/core: Reorganize fields in the first line of WARNING output, add ->comm[] output
bugs/sh: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/parisc: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Concatenate 'cond_str' with '__FILE__' in __BUG_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Pass in 'cond_str' to __BUG_FLAGS()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- x86/alternatives: Drop unnecessary test after call to
alt_replace_call() (Juergen Gross)
- x86/dumpstack: Prevent KASAN false positive warnings in
__show_regs() (Tengda Wu)
* tag 'x86-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Prevent KASAN false positive warnings in __show_regs()
x86/alternative: Drop not needed test after call of alt_replace_call()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 math-emu fix from Ingo Molnar:
"A single fix for an ancient prototype in the math-emu code, by Arnd
Bergmann"
* tag 'x86-build-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/math-emu: Fix div_Xsig() prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
- x86/apic: Fix the frequency in apic=verbose log output (Julian
Stecklina)
- Simplify mp_irqdomain_alloc() slightly (Christophe JAILLET)
* tag 'x86-apic-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix frequency in apic=verbose log output
x86/ioapic: Simplify mp_irqdomain_alloc() slightly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scalability and load-balancing improvements:
- Enable scheduler feature NEXT_BUDDY (Mel Gorman)
- Reimplement NEXT_BUDDY to align with EEVDF goals (Mel Gorman)
- Skip sched_balance_running cmpxchg when balance is not due (Tim
Chen)
- Implement generic code for architecture specific sched domain NUMA
distances (Tim Chen)
- Optimize the NUMA distances of the sched-domains builds of Intel
Granite Rapids (GNR) and Clearwater Forest (CWF) platforms (Tim
Chen)
- Implement proportional newidle balance: a randomized algorithm that
runs newidle balancing proportional to its success rate. (Peter
Zijlstra)
Scheduler infrastructure changes:
- Implement the 'sched_change' scoped_guard() pattern for the entire
scheduler (Peter Zijlstra)
- More broadly utilize the sched_change guard (Peter Zijlstra)
- Add support to pick functions to take runqueue-flags (Joel
Fernandes)
- Provide and use set_need_resched_current() (Peter Zijlstra)
Fair scheduling enhancements:
- Forfeit vruntime on yield (Fernand Sieber)
- Only update stats for allowed CPUs when looking for dst group (Adam
Li)
CPU-core scheduling enhancements:
- Optimize core cookie matching check (Fernand Sieber)
Deadline scheduler fixes:
- Only set free_cpus for online runqueues (Doug Berger)
- Fix dl_server time accounting (Peter Zijlstra)
- Fix dl_server stop condition (Peter Zijlstra)
Proxy scheduling fixes:
- Yield the donor task (Fernand Sieber)
Fixes and cleanups:
- Fix do_set_cpus_allowed() locking (Peter Zijlstra)
- Fix migrate_disable_switch() locking (Peter Zijlstra)
- Remove double update_rq_clock() in __set_cpus_allowed_ptr_locked()
(Hao Jia)
- Increase sched_tick_remote timeout (Phil Auld)
- sched/deadline: Use cpumask_weight_and() in dl_bw_cpus() (Shrikanth
Hegde)
- sched/deadline: Clean up select_task_rq_dl() (Shrikanth Hegde)"
* tag 'sched-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
sched: Provide and use set_need_resched_current()
sched/fair: Proportional newidle balance
sched/fair: Small cleanup to update_newidle_cost()
sched/fair: Small cleanup to sched_balance_newidle()
sched/fair: Revert max_newidle_lb_cost bump
sched/fair: Reimplement NEXT_BUDDY to align with EEVDF goals
sched/fair: Enable scheduler feature NEXT_BUDDY
sched: Increase sched_tick_remote timeout
sched/fair: Have SD_SERIALIZE affect newidle balancing
sched/fair: Skip sched_balance_running cmpxchg when balance is not due
sched/deadline: Minor cleanup in select_task_rq_dl()
sched/deadline: Use cpumask_weight_and() in dl_bw_cpus
sched/deadline: Document dl_server
sched/deadline: Fix dl_server stop condition
sched/deadline: Fix dl_server time accounting
sched/core: Remove double update_rq_clock() in __set_cpus_allowed_ptr_locked()
sched/eevdf: Fix min_vruntime vs avg_vruntime
sched/core: Add comment explaining force-idle vruntime snapshots
sched/core: Optimize core cookie matching check
sched/proxy: Yield the donor task
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/wireguard-linux
Jason A. Donenfeld says:
====================
WireGuard updates for Linux 6.19-rc1.
Please find here Asbjørn's ynl series. This has been sitting in my
testing for the last week or so, since he sent out the latest series.
I've dropped the yml sample code, as he found an issue in that last
minute, but otherwise, we've sat on this code for long enough, so
let's see how it goes.
* tag 'wireguard-6.19-rc1-for-jakub' of https://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/wireguard-linux:
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
wireguard: netlink: lower .maxattr for WG_CMD_GET_DEVICE
wireguard: netlink: convert to split ops
wireguard: netlink: use WG_KEY_LEN in policies
wireguard: netlink: validate nested arrays in policy
wireguard: netlink: enable strict genetlink validation
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mutexes:
- Redo __mutex_init() to reduce generated code size (Sebastian
Andrzej Siewior)
Seqlocks:
- Introduce scoped_seqlock_read() (Peter Zijlstra)
- Change thread_group_cputime() to use scoped_seqlock_read() (Oleg
Nesterov)
- Change do_task_stat() to use scoped_seqlock_read() (Oleg Nesterov)
- Change do_io_accounting() to use scoped_seqlock_read() (Oleg
Nesterov)
- Fix the incorrect documentation of read_seqbegin_or_lock() /
need_seqretry() (Oleg Nesterov)
- Allow KASAN to fail optimizing (Peter Zijlstra)
Local lock updates:
- Fix all kernel-doc warnings (Randy Dunlap)
- Add the <linux/local_lock*.h> headers to MAINTAINERS (Sebastian
Andrzej Siewior)
- Reduce the risk of shadowing via s/l/__l/ and s/tl/__tl/ (Vincent
Mailhol)
Lock debugging:
- spinlock/debug: Fix data-race in do_raw_write_lock (Alexander
Sverdlin)
Atomic primitives infrastructure:
- atomic: Skip alignment check for try_cmpxchg() old arg (Arnd
Bergmann)
Rust runtime integration:
- sync: atomic: Enable generated Atomic<T> usage (Boqun Feng)
- sync: atomic: Implement Debug for Atomic<Debug> (Boqun Feng)
- debugfs: Remove Rust native atomics and replace them with Linux
versions (Boqun Feng)
- debugfs: Implement Reader for Mutex<T> only when T is Unpin (Boqun
Feng)
- lock: guard: Add T: Unpin bound to DerefMut (Daniel Almeida)
- lock: Pin the inner data (Daniel Almeida)
- lock: Add a Pin<&mut T> accessor (Daniel Almeida)"
* tag 'locking-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/local_lock: Fix all kernel-doc warnings
locking/local_lock: s/l/__l/ and s/tl/__tl/ to reduce the risk of shadowing
locking/local_lock: Add the <linux/local_lock*.h> headers to MAINTAINERS
locking/mutex: Redo __mutex_init() to reduce generated code size
rust: debugfs: Replace the usage of Rust native atomics
rust: sync: atomic: Implement Debug for Atomic<Debug>
rust: sync: atomic: Make Atomic*Ops pub(crate)
seqlock: Allow KASAN to fail optimizing
rust: debugfs: Implement Reader for Mutex<T> only when T is Unpin
seqlock: Change do_io_accounting() to use scoped_seqlock_read()
seqlock: Change do_task_stat() to use scoped_seqlock_read()
seqlock: Change thread_group_cputime() to use scoped_seqlock_read()
seqlock: Introduce scoped_seqlock_read()
documentation: seqlock: fix the wrong documentation of read_seqbegin_or_lock/need_seqretry
atomic: Skip alignment check for try_cmpxchg() old arg
rust: lock: Add a Pin<&mut T> accessor
rust: lock: Pin the inner data
rust: lock: guard: Add T: Unpin bound to DerefMut
locking/spinlock/debug: Fix data-race in do_raw_write_lock
|
|
This patch adopts netlink policies and command definitions
generated by ynl-gen, thus completing the conversion to YNL.
Given that the old and new policies are functionally identical
and have just been moved to a new file, it serves to verify
that the policies generated from the spec are identical to the
previous policy code.
The following functions are renamed:
wg_get_device_dump() -> wg_get_device_dumpit()
wg_set_device() -> wg_set_device_doit()
The new files are covered by the existing drivers/net/wireguard/
pattern in MAINTAINERS.
No behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Use ynl-gen to generate the UAPI header for WireGuard.
The cosmetic changes in this patch confirms that the spec is aligned
with the implementation. By using the generated version, it ensures
that they stay in sync.
Changes in the generated header:
* Trivial header guard rename.
* Trivial white space changes.
* Trivial comment changes.
* Precompute bitflags in ynl-gen (see [1]).
* Drop __*_F_ALL constants (see [1]).
[1] https://lore.kernel.org/r/20251014123201.6ecfd146@kernel.org/
No behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Move the wg*_flag enums, so they are defined above the attribute set
enums, where ynl-gen would place them.
This is an incremental step towards adopting an UAPI header generated
by ynl-gen. This is split out to keep the patches readable.
This is a trivial patch with no behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This patch moves enum wg_cmd to the end of the file, where ynl-gen
would generate it.
This is an incremental step towards adopting an UAPI header generated
by ynl-gen. This is split out to keep the patches readable.
This is a trivial patch with no behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This patch adds a near[1] complete YNL specification for WireGuard,
documenting the protocol in a machine-readable format, rather than
comments in wireguard.h, and eases usage from C and non-C programming
languages alike.
The generated C library will be featured in a later patch, so in
this patch I will use the in-kernel python client for examples.
This makes the documentation in the UAPI header redundant, it is
therefore removed. The in-line documentation in the spec is based
on the existing comment in wireguard.h, and once released it will
be available in the kernel documentation at:
https://docs.kernel.org/netlink/specs/wireguard.html
(until then run: make htmldocs)
Generate wireguard.rst from this spec:
$ make -C tools/net/ynl/generated/ wireguard.rst
Query wireguard interface through pyynl:
$ sudo ./tools/net/ynl/pyynl/cli.py --family wireguard \
--dump get-device \
--json '{"ifindex":3}'
[{'fwmark': 0,
'ifindex': 3,
'ifname': 'wg-test',
'listen-port': 54318,
'peers': [{0: {'allowedips': [{0: {'cidr-mask': 0,
'family': 2,
'ipaddr': '0.0.0.0'}},
{0: {'cidr-mask': 0,
'family': 10,
'ipaddr': '::'}}],
'endpoint': b'[...]',
'last-handshake-time': {'nsec': 42, 'sec': 42},
'persistent-keepalive-interval': 42,
'preshared-key': '[...]',
'protocol-version': 1,
'public-key': '[...]',
'rx-bytes': 42,
'tx-bytes': 42}}],
'private-key': '[...]',
'public-key': '[...]'}]
Add another allowed IP prefix:
$ sudo ./tools/net/ynl/pyynl/cli.py --family wireguard \
--do set-device --json '{"ifindex":3,"peers":[
{"public-key":"6a df b1 83 a4 ..","allowedips":[
{"cidr-mask":0,"family":10,"ipaddr":"::"}]}]}'
[1] As can be seen above, the "endpoint" is only dumped as binary data,
as it can't be fully described in YNL. It's either a struct
sockaddr_in or struct sockaddr_in6 depending on the attribute length.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
|
|
Carolina Jubran says:
====================
selftests: drv-net: Fix issues in devlink_rate_tc_bw.py
This series fixes issues in the devlink_rate_tc_bw.py selftest and
introduces a new Iperf3Runner that helps with measurement handling.
====================
Link: https://patch.msgid.link/20251130091938.4109055-1-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, tolerance is computed against the TC’s expected percentage,
making TC3 (20%) validation overly strict and TC4 (80%) overly loose.
Update BandwidthValidator to take a dict of shares and compute bounds
relative to the overall total, so that all shares are validated
consistently.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-7-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the documented bandwidth distribution between TC3 and TC4
from 80/20 to 20/80. Update test descriptions and printed messages
to consistently reflect the intended split.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-6-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the inline iperf3 subprocess and JSON parsing with
Iperf3Runner.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-4-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes devlink_rate_tc_bw.py present in the Makefile under the same
directory.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-2-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- HCI: Add initial support for PAST
- hci_core: Introduce HCI_CONN_FLAG_PAST
- ISO: Add support to bind to trigger PAST
- HCI: Always use the identity address when initializing a connection
- ISO: Attempt to resolve broadcast address
- MGMT: Allow use of Set Device Flags without Add Device
- ISO: Fix not updating BIS sender source address
- HCI: Add support for LL Extended Feature Set
driver:
- btusb: Add new VID/PID 2b89/6275 for RTL8761BUV
- btusb: MT7920: Add VID/PID 0489/e135
- btusb: MT7922: Add VID/PID 0489/e170
- btusb: Add new VID/PID 13d3/3533 for RTL8821CE
- btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
- btusb: Reclassify Qualcomm WCN6855 debug packets
- btintel_pcie: Introduce HCI Driver protocol
- btintel_pcie: Support for S4 (Hibernate)
- btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling
- dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schema
- btbcm: Use kmalloc_array() to prevent overflow
- btrtl: Add the support for RTL8761CUV
- hci_h5: avoid sending two SYNC messages
- hci_h5: implement CRC data integrity
MAINTAINERS:
- Add Bartosz Golaszewski as Qualcomm hci_qca maintainer
* tag 'for-net-next-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (29 commits)
Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
Bluetooth: HCI: Add support for LL Extended Feature Set
drivers/bluetooth: btbcm: Use kmalloc_array() to prevent overflow
Bluetooth: btintel_pcie: Introduce HCI Driver protocol
Bluetooth: btusb: add new custom firmwares
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Bluetooth: iso: fix socket matching ambiguity between BIS and CIS
Bluetooth: MAINTAINERS: Add Bartosz Golaszewski as Qualcomm hci_qca maintainer
Bluetooth: btrtl: Add the support for RTL8761CUV
Bluetooth: Remove redundant pm_runtime_mark_last_busy() calls
dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schema
Bluetooth: btusb: Reclassify Qualcomm WCN6855 debug packets
Bluetooth: btusb: Add new VID/PID 2b89/6275 for RTL8761BUV
Bluetooth: btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling
Bluetooth: btintel_pcie: Support for S4 (Hibernate)
Bluetooth: btusb: MT7922: Add VID/PID 0489/e170
Bluetooth: btusb: MT7920: Add VID/PID 0489/e135
Bluetooth: ISO: Fix not updating BIS sender source address
...
====================
Link: https://patch.msgid.link/20251201213818.97249-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the napi functions napi_alloc_skb() and napi_gro_receive() instead
of netdev_alloc_skb() and netif_receive_skb() for more efficient packet
receiving. The switch to napi aware functions increases the RX
throughput, reduces the occurrence of retransmissions and improves the
resilience against SKB allocation failures.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251130194155.1950980-1-fuchsfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
DSA simple HSR offload
Provide a "simple" form of HSR offload for 8 DSA drivers (just the
NETIF_F_HW_HSR_DUP feature) based on the fact that their taggers use the
dsa_xmit_port_mask() function. This is in patches 6-13/15.
The helpers per se are introduced in patch 5/15, and documented in patch
15/15. Patch 14/15 is another small (and related) documentation update.
For HSR interlink ports the offloading rules are not quite so clear, and
for now we completely reject the offload. We can revise that once we see
a full offload implementation and understand what is needed.
To reject the offload, we need to know the port type, and patch 2/15
helps with that.
xrs700x is another driver which should have rejected offload based on
port type (patch 4/15). This is a bug fix submitted through net-next due
to the extra API required to fix it. If necessary, it could also be
picked up separately for backporting.
There is also patch 3/15, which makes the HSR offload like the others
supported by DSA: if we fall back to the software implementation, don't
call port_hsr_leave(), because by definition there won't be anything to
do.
A slightly unrelated change is patch 1/15, but I noticed this along the
way, and if I were to submit it separately, it would conflict with this
work (it would appear in patch 12/15's context).
Most of the driver additions are trivial. By far the most complex was
ocelot (which I could test). Microchip ksz (which I cannot test, and did
not patch) would also have some complexity. Essentially, ksz_hsr_join()
could fall back to a partial offload through the simple helpers, if the
full offload is not possible. But keeping track of which offload kind
was used is necessary later in ksz_hsr_leave(). This is left as homework
for interested developers.
With this patch set, one can observe a 50% reduction in transmitted
traffic over HSR interfaces.
====================
Link: https://patch.msgid.link/20251130131657.65080-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Keep the documentation up to date.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-16-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 5055cccfc2d1 ("net: hsr: Provide RedBox support
(HSR-SAN)"), RedBox is available (including for offload in DSA).
Update the DSA documentation that states it isn't.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-15-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "a5psw" tagging protocol uses dsa_xmit_port_mask(), which means
we can offload HSR packet duplication on transmit. Enable that feature.
Cc: "Clément Léger" <clement.leger@bootlin.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-14-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "mtk" tagging protocol uses dsa_xmit_port_mask(), which means we can
offload HSR packet duplication on transmit. Enable that feature.
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20251130131657.65080-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "hellcreek" tagging protocol uses dsa_xmit_port_mask(), which means
we can offload HSR packet duplication on transmit. Enable that feature.
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "trailer" tagging protocol uses dsa_xmit_port_mask(), which means we
can offload HSR packet duplication on transmit. Enable that feature.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both the "gswip" and "gsw1xx" protocols use dsa_xmit_port_mask(), so
they are compatible with accelerating TX packet duplication for HSR
rings.
Enable that feature by setting the port_hsr_join() and port_hsr_leave()
operations to the simple helpers provided by DSA.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All known Realtek protocols: "rtl4a", "rtl8_4" and "rtl8_4t" use
dsa_xmit_port_mask(), so they are compatible with accelerating TX packet
duplication for HSR rings.
Enable that feature by setting the port_hsr_join() and port_hsr_leave()
operations to the simple helpers provided by DSA.
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251130131657.65080-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accelerate TX packet duplication with HSR rings.
This is only possible with the NPI-based "ocelot" tagging protocol, not
with "ocelot-8021q", because the latter does not use dsa_xmit_port_mask().
This has 2 implications:
- Depending on tagging protocol, we should set (or not set) the offload
feature flags. Switching tagging protocols is done with ports down, by
design. Additional calls to dsa_port_simple_hsr_join() can be put in
the ds->ops->change_tag_protocol() path, as I had originally tried,
but this would not work: dsa_user_setup_tagger() would later clear
the feature flag that we just set. So the additional call to
dsa_port_simple_hsr_join() should sit in the ds->ops->port_enable()
call.
- When joining a HSR ring and we are currently using "ocelot-8021q",
there are cases when we should return -EOPNOTSUPP (pessimistic) and
cases when we shouldn't (optimistic). In the pessimistic case, it is a
configuration that the port won't support even with the right tagging
protocol. Distinguishing between these 2 cases matters because if we
just return -EOPNOTSUPP regardless, we lose the dp->hsr_dev pointer
and can no longer replay the offload later for the optimistic case,
from felix_port_enable().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accelerate TX packet duplication with HSR rings.
Cc: David Yang <mmyangfl@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns out that HSR offloads are so fine-grained that many DSA
switches can do a small part even though they weren't specifically
designed for the protocols supported by that driver (HSR and PRP).
Specifically NETIF_F_HW_HSR_DUP - it is simple packet duplication on
transmit, towards all (aka 2) ports members of the HSR device.
For many DSA switches, we know how to duplicate a packet, even though we
never typically use that feature. The transmit port mask from the
tagging protocol can have multiple bits set, and the switch should send
the packet once to every port with a bit set from that mask.
Nonetheless, not all tagging protocols are like this, and sometimes the
port is a single numeric value rather than a bit mask. For that reason,
and also because switches can sometimes change tagging protocols for
different ones, we need to make HSR offload helpers opt-in.
For devices that can do nothing else HSR-specific, we introduce
dsa_port_simple_hsr_join() and dsa_port_simple_hsr_leave(). These
functions monitor when two user ports of the same switch are part of the
same HSR device, and when that condition is true, they toggle the
NETIF_F_HW_HSR_DUP feature flag of both net devices.
Normally only dsa_port_simple_hsr_join() and dsa_port_simple_hsr_leave()
are needed. The dsa_port_simple_hsr_validate() helper is just to see
what kind of configuration could be offloadable using the generic
helpers. This is used by switch drivers which are not currently using
the right tagging protocol to offload this HSR ring, but could in
principle offload it after changing the tagger.
Suggested-by: David Yang <mmyangfl@gmail.com>
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Cc: Chester A. Unal" <chester.a.unal@arinc9.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As discussed here:
https://lore.kernel.org/netdev/20240620090210.drop6jwh7e5qw556@skbuf/
the fact is that the xrs700x.c driver only supports offloading
HSR_PT_SLAVE_A and HSR_PT_SLAVE_B (which were the only port types at the
time the offload was written, _for this driver_).
Up until now, the API did not explicitly tell offloading drivers what
port has what role. So xrs700x can get confused and think that it can
support a configuration which it actually can't. There was a table in
the attached link which gave an example:
$ ip link add name hsr0 type hsr slave1 swp0 slave2 swp1 \
interlink swp2 supervision 45 version 1
HSR_PT_SLAVE_A HSR_PT_SLAVE_B HSR_PT_INTERLINK
----------------------------------------------------------------
user
space 0 1 2
requests
----------------------------------------------------------------
XRS700X
driver 1 2 -
understands
The switch would act as if the ring ports were swp1 and swp2.
Now that we have explicit hsr_get_port_type() API, let's use that to
work around the unintended semantical changes of the offloading API
brought by the introduction of interlink ports in HSR.
Fixes: 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)")
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Link: https://patch.msgid.link/20251130131657.65080-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
