| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
As per the updated WA database, Wa_18041344222 no longer applies to
graphics IP version 30.01. Remove it.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/280ab3e8dce8d7a40540ae634a5432694ac17ab0.1763762330.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>::new::<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
|
|
Do not reference the loop variable job after the loop has exited.
Instead, save the job from the last iteration of the loop.
Fixes: 00937fe1921a ("drm/xe/vf: Start re-emission from first unsignaled job during VF migration")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202511291102.jnnKP6IB-lkp@intel.com/
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251203011809.968893-1-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
Use tpm_ret_to_err() to transmute TPM return codes in trusted_tpm2.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Using -EFAULT as the tpm_ret_to_err() fallback error code causes makes it
incompatible on how trusted keys transmute TPM return codes.
Change the fallback as -EPERM in order to gain compatibility with trusted
keys. In addition, map TPM_RC_HASH to -EINVAL in order to be compatible
with tpm2_seal_trusted() return values.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
|
|
tpm_find_get_ops() looks for the first valid TPM if the caller passes in
NULL. All internal users have been converted to either associate
themselves with a TPM directly, or call tpm_default_chip() as part of
their setup. Remove the no longer necessary tpm_find_get_ops().
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Update the kerneldoc parameter definitions for __crb_go_idle
and __crb_cmd_ready to include the loc parameter.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The spelling of the word "requrest" is incorrect; it should be "request".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Remove parentheses around assert statements in Python. With parentheses,
assert always evaluates to True, making the checks ineffective.
Signed-off-by: Maurice Hieronymus <mhi@mailbox.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull workqueue updates from Tejun Heo:
- Rescuer affinity management: Affinity is now updated only when
detached using wq_unbound_cpumask consistently. DISASSOCIATED workers
also follow unbound cpumask changes to avoid breaking CPU isolation
- Rescuer cleanups preparing for fetching work items one by one from
pool list: Work assignment factored out, optimized to skip pwqs no
longer needing rescue, and shutdown logic simplified
- Unused assert_rcu_or_wq_mutex_or_pool_mutex() removed
* tag 'wq-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Don't rely on wq->rescuer to stop rescuer
workqueue: Only assign rescuer work when really needed
workqueue: Factor out assign_rescuer_work()
workqueue: Init rescuer's affinities as wq_unbound_cpumask
workqueue: Let DISASSOCIATED workers follow unbound wq cpumask changes
workqueue: Update the rescuer's affinity only when it is detached
workqueue: Remove unused assert_rcu_or_wq_mutex_or_pool_mutex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull lkmm documentation update from Paul McKenney:
- Sort the memory-barriers.txt file's wait_event* and wait_on_bit* list
alphabetically
* tag 'lkmm.2025.12.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
memory-barriers.txt: Sort wait_event* and wait_on_bit* list alphabetically
|
|
- Use max() instead of max_t() to ease static analysis (David Laight)
- Add Manivannan Sadhasivam as PCI/pwrctrl maintainer (Bartosz Golaszewski)
* pci/misc:
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
PCI: Use max() instead of max_t() to ease static analysis
|
|
- Add a struct pci_ops.assert_perst() function pointer to assert/deassert
PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya
Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch,
which must be held in reset after poweron so the pwrctrl driver can
configure the switch via I2C before bringing up the links (Krishna
Chaitanya Chundru)
* pci/pwrctrl-tc9563:
PCI: pwrctrl: Add power control driver for TC9563
PCI: qcom: Implement .assert_perst()
PCI: dwc: Implement .assert_perst() for dwc glue drivers
PCI: Add .assert_perst() to control PCIe PERST#
dt-bindings: PCI: Add binding for Toshiba TC9563 PCIe switch
|
|
- Fix a race between link training and endpoint register initialization
(Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
- Add #includes to avoid depending on 'proxy' headers (Andy Shevchenko)
* pci/controller/stm32:
PCI: stm32: Don't use 'proxy' headers
PCI: stm32: Fix EP page_size alignment
PCI: stm32: Fix LTSSM EP race with start link
|
|
- Add DT binding and driver for SpacemiT K1 (Alex Elder)
* pci/controller/spacemit-k1:
PCI: spacemit: Add SpacemiT PCIe host driver
dt-bindings: pci: spacemit: Introduce PCIe host controller
|
|
- Add module support for platform controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)
- Add DT binding and driver for CIX Sky1 (Hans Zhang)
* pci/controller/sky1:
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
PCI: cadence: Move PCIe RP common functions to a separate file
PCI: cadence: Split PCIe controller header file
PCI: cadence: Add module support for platform controller driver
|
|
- Fix sg2042_pcie_remove() reference count issue (Christophe JAILLET)
* pci/controller/sg2042:
PCI: sg2042: Fix a reference count issue in sg2042_pcie_remove()
|
|
- Add NXP S32G host controller DT binding and driver (Vincent Guittot)
* pci/controller/s32g:
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
|
|
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea)
* pci/controller/rzg3s-host:
PCI: Add Renesas RZ/G3S host controller driver
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
|
|
- Drop ARM dependency so we can build test on other arches (Geert
Uytterhoeven)
* pci/controller/rcar-gen2:
PCI: rcar-gen2: Drop ARM dependency from PCI_RCAR_GEN2
|
|
- Look up OPP using both frequency and data rate (not just frequency) so
RPMh votes can account for both (Krishna Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Use frequency and level based OPP lookup
|
|
- Update DT binding to name DBI region "dbi", not "elbi", and update driver
to support both (Manivannan Sadhasivam)
* pci/controller/meson:
PCI: meson: Fix parsing the DBI register region
dt-bindings: PCI: amlogic: Fix the register name of the DBI region
|
|
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian Marangi)
* pci/controller/mediatek:
PCI: mediatek: Add support for Airoha AN7583 SoC
PCI: mediatek: Use generic MACRO for TPVPERL delay
PCI: mediatek: Convert bool to single quirks entry and bitmap
dt-bindings: PCI: mediatek: Add support for Airoha AN7583
dt-bindings: PCI: mediatek: Convert to YAML schema
|
|
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Add support to build as a loadable module
PCI: dwc: Export dw_pcie_allocate_domains() and dw_pcie_ep_raise_msix_irq()
PCI: Export pci_get_host_bridge_device() for use by pci-keystone
PCI: keystone: Exit ks_pcie_probe() for invalid mode
|
|
- Use devm_clk_get_optional_enabled() instead of open-coding
devm_clk_get_optional() and clk_prepare_enable() (Anand Moon)
* pci/controller/j721e:
PCI: j721e: Use 'pcie->reset_gpio' directly and drop the local variable
PCI: j721e: Use devm_clk_get_optional_enabled() to get and enable the clock
|
|
- Guard ARM32-specific hook_fault_code() with ifdefs so we can build test
on other arches (Bjorn Helgaas)
* pci/controller/ixp4xx:
PCI: ixp4xx: Guard ARM32-specific hook_fault_code()
|
|
- Use devm_regulator_get_enable_optional() to simplify probing (Anand Moon)
* pci/controller/dw-rockchip:
PCI: dw-rockchip: Simplify regulator setup with devm_regulator_get_enable_optional()
|
|
- Update PORT_LOGIC_LTSSM_STATE_MASK to be a 6-bit mask as per spec, not a
5-bit mask (Shawn Lin)
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver says
it's supported, which prevents users from enabling non-working L1SS.
Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas)
- Configure L1SS support in dw-rockchip when DT says 'supports-clkreq'
(Shawn Lin)
* pci/controller/dwc:
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
PCI: dwc: Advertise L1 PM Substates only if driver requests it
PCI: dwc: Fix wrong PORT_LOGIC_LTSSM_STATE_MASK definition
|
|
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe caused an
unrecoverable abort (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Add panic/die handler to driver
PCI: brcmstb: Add a way to indicate if PCIe bridge is active
PCI: brcmstb: Fix disabling L0s capability
|
|
- Move struct pci_host_bridge allocation from pci_host_common_init() to
callers, which significantly simplifies pcie-apple (Marc Zyngier)
* pci/controller/host-common:
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
|
|
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between host and
endpoint (Frank Li)
* pci/endpoint:
PCI: endpoint: pci-epf-vntb: Add MSI doorbell support
PCI: endpoint: Add pci_epf_assign_bar_space() API
PCI: endpoint: Add pci_epf_get_required_bar_size() helper
PCI: endpoint: Rename 'epf_bar::aligned_size' to 'epf_bar:mem_size'
PCI: endpoint: pci-epf-test: Fix sleeping function being called from atomic context
|
|
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add 'contains' to the 'select' schema to enable the amlogic,axg-pcie
binding (Rob Herring)
- Update Manivannan Sadhasivam's email address in bindings (Manivannan
Sadhasivam)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas
(Krzysztof Kozlowski)
* pci/dt-binding:
dt-bindings: PCI: qcom,pcie-x1e80100: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8550: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8450: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8350: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8250: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8150: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sc8280xp: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sc7280: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sa8775p: Add missing required power-domains and resets
dt-bindings: PCI: Update the email address for Manivannan Sadhasivam
dt-bindings: PCI: amlogic,axg-pcie: Fix select schema
dt-bindings: PCI: qcom,pcie-sm8550: Add Kaanapali compatible
dt-bindings: PCI: dwc: rockchip: Add RK3528 variant
|
|
- Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu
drivers so the PCI core can restore BARs if the resize fails (Ilpo
Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen)
* pci/resource:
PCI: Validate pci_rebar_size_supported() input
PCI: Convert BAR sizes bitmasks to u64
drm/amdgpu: Use pci_rebar_get_max_size()
drm/xe/vram: Use pci_rebar_get_max_size()
PCI: Add pci_rebar_get_max_size()
drm/xe/vram: Use PCI rebar helpers in resize_vram_bar()
drm/i915/gt: Use pci_rebar_size_supported()
PCI: Add pci_rebar_size_supported() helper
PCI: Improve Resizable BAR functions kernel doc
PCI: Move pci_rebar_size_to_bytes() and export it
PCI: Move pci_rebar_bytes_to_size() and clean it up
PCI: Move Resizable BAR code to rebar.c
PCI: Prevent restoring assigned resources
drm/amdgpu: Remove driver side BAR release before resize
drm/i915: Remove driver side BAR release before resize
drm/xe: Remove driver side BAR release before resize
PCI: Add kerneldoc for pci_resize_resource()
PCI: Fix restoring BARs on BAR resize rollback path
PCI: Free saved list without holding pci_bus_sem
PCI: Try BAR resize even when no window was released
PCI: Change pci_dev variable from 'bridge' to 'dev'
PCI/IOV: Adjust ->barsz[] when changing BAR size
PCI: Prevent resource tree corruption when BAR resize fails
|
|
- Enable PTM only if device advertises support for a relevant role, to
prevent invalid PTM Requests that cause ACS violations that are reported
as AER Uncorrectable Non-Fatal errors (Mika Westerberg)
* pci/ptm:
PCI/PTM: Enable only if device advertises relevant role
|
|
- For drivers using PCI legacy suspend, save config state at suspend so
that state (not any earlier state from enumeration, probe, or error
recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks PM, save config state
at hibernate so that state (not any earlier state from enumeration,
probe, or error recovery) will be restored when resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding, so
error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it since
the PCI core always does it and pci_restore_state() no longer invalidates
the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state they
want restored during error recovery (Lukas Wunner)
* pci/err:
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
|
|
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common allocator
(Dan Williams)
* pci/enumeration:
PCI: vmd: Switch to pci_bus_find_emul_domain_nr()
PCI: Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- mempool_alloc_bulk() support for upcoming users in the block layer
that need to allocate multiple objects at once with the mempool's
guaranteed progress semantics, which is not achievable with an
allocation single objects in a loop. Along with refactoring and
various improvements (Christoph Hellwig)
- Preparations for the upcoming separation of struct slab from struct
page, mostly by removing the struct folio layer, as the purpose of
struct folio has shifted since it became used in slab code (Matthew
Wilcox)
- Modernisation of slab's boot param API usage, which removes some
unexpected parsing corner cases (Petr Tesarik)
- Refactoring of freelist_aba_t (now struct freelist_counters) and
associated functions for double cmpxchg, enabled by -fms-extensions
(Vlastimil Babka)
- Cleanups and improvements related to sheaves caching layer, that were
part of the full conversion to sheaves, which is planned for the next
release (Vlastimil Babka)
* tag 'slab-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (42 commits)
slab: Remove unnecessary call to compound_head() in alloc_from_pcs()
mempool: clarify behavior of mempool_alloc_preallocated()
mempool: drop the file name in the top of file comment
mempool: de-typedef
mempool: remove mempool_{init,create}_kvmalloc_pool
mempool: legitimize the io_schedule_timeout in mempool_alloc_from_pool
mempool: add mempool_{alloc,free}_bulk
mempool: factor out a mempool_alloc_from_pool helper
slab: Remove references to folios from virt_to_slab()
kasan: Remove references to folio in __kasan_mempool_poison_object()
memcg: Convert mem_cgroup_from_obj_folio() to mem_cgroup_from_obj_slab()
mempool: factor out a mempool_adjust_gfp helper
mempool: add error injection support
mempool: improve kerneldoc comments
mm: improve kerneldoc comments for __alloc_pages_bulk
fault-inject: make enum fault_flags available unconditionally
usercopy: Remove folio references from check_heap_object()
slab: Remove folio references from kfree_nolock()
slab: Remove folio references from kfree_rcu_sheaf()
slab: Remove folio references from build_detached_freelist()
...
|
|
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE udates from Fan Wu:
"The primary change is the addition of support for the AT_EXECVE_CHECK
flag. This allows interpreters to signal the kernel to perform IPE
security checks on script files before execution, extending IPE
enforcement to indirectly executed scripts.
Update documentation for it, and also fix a comment"
* tag 'ipe-pr-20251202' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: Update documentation for script enforcement
ipe: Add AT_EXECVE_CHECK support for script enforcement
ipe: Drop a duplicated CONFIG_ prefix in the ifdeffery
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Bug fixes:
- defer credentials checking from the bprm_check_security hook to the
bprm_creds_from_file security hook
- properly ignore IMA policy rules based on undefined SELinux labels
IMA policy rule extensions:
- extend IMA to limit including file hashes in the audit logs
(dont_audit action)
- define a new filesystem subtype policy option (fs_subtype)
Misc:
- extend IMA to support in-kernel module decompression by deferring
the IMA signature verification in kernel_read_file() to after the
kernel module is decompressed"
* tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Handle error code returned by ima_filter_rule_match()
ima: Access decompressed kernel module to verify appended signature
ima: add fs_subtype condition for distinguishing FUSE instances
ima: add dont_audit action to suppress audit actions
ima: Attach CREDS_CHECK IMA hook to bprm_creds_from_file LSM hook
|
