| Age | Commit message (Collapse) | Author |
|---|
|
Add hwid for Address Translation Unit (ATU)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SOC v1_0 supports a greater number of IP instances.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We would need to reserve SDMA queues per KFD node.
As a result, rework the SDMA reserved queue handling to make it per
KFD node.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return 0 if the realted ASIC do not have supports_baco
function to fix the NULL pointer issue.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If SDMA block not enabled, buffer_funcs will not initialize,
fix the null pointer issue if buffer_funcs not initialized.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
nr_dying_descendants
Replace the manual sleep-and-retry logic in test_kmem_dead_cgroups()
with the new helper `cg_read_key_long_poll()`. This change improves
the robustness of the test by polling the "nr_dying_descendants"
counter in `cgroup.stat` until it reaches 0 or the timeout is exceeded.
Additionally, increase the retry timeout to 8 seconds (from 5 seconds)
based on testing results:
- With 5-second timeout: 4/20 runs passed.
- With 8-second timeout: 20/20 runs passed.
The 8 second timeout is based on stress testing of test_kmem_dead_cgroups()
under load: 5 seconds was occasionally not enough for reclaim of dying
descendants to complete, whereas 8 seconds consistently covered the observed
latencies. This value is intended as a generous upper bound for the
asynchronous reclaim and is not tied to any specific kernel constant, so it
can be adjusted in the future if reclaim behavior changes.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
test_memcg_sock() currently requires that memory.stat's "sock " counter
is exactly zero immediately after the TCP server exits. On a busy system
this assumption is too strict:
- Socket memory may be freed with a small delay (e.g. RCU callbacks).
- memcg statistics are updated asynchronously via the rstat flushing
worker, so the "sock " value in memory.stat can stay non-zero for a
short period of time even after all socket memory has been uncharged.
As a result, test_memcg_sock() can intermittently fail even though socket
memory accounting is working correctly.
Make the test more robust by polling memory.stat for the "sock "
counter and allowing it some time to drop to zero instead of checking
it only once. The timeout is set to 3 seconds to cover the periodic
rstat flush interval (FLUSH_TIME = 2*HZ by default) plus some
scheduling slack. If the counter does not become zero within the
timeout, the test still fails as before.
On my test system, running test_memcontrol 50 times produced:
- Before this patch: 6/50 runs passed.
- After this patch: 50/50 runs passed.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce a new helper function `cg_read_key_long_poll()` in
cgroup_util.h. This function polls the specified key in a cgroup file
until it matches the expected value or the retry limit is reached,
with configurable wait intervals between retries.
This helper is particularly useful for handling asynchronously updated
cgroup statistics (e.g., memory.stat), where immediate reads may
observe stale values, especially on busy systems. It allows tests and
other utilities to handle such cases more flexibly.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
On x86-64, this_cpu_cmpxchg() uses CMPXCHG without LOCK prefix which
means it is only safe for the local CPU and not for multiple CPUs.
Recently the commit 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi
safe") make css_rstat_updated lockless and uses lockless list to allow
reentrancy. Since css_rstat_updated can invoked from process context,
IRQ and NMI, it uses this_cpu_cmpxchg() to select the winner which will
inset the lockless lnode into the global per-cpu lockless list.
However the commit missed one case where lockless node of a cgroup can
be accessed and modified by another CPU doing the flushing. Basically
llist_del_first_init() in css_process_update_tree().
On a cursory look, it can be questioned how css_process_update_tree()
can see a lockless node in global lockless list where the updater is at
this_cpu_cmpxchg() and before llist_add() call in css_rstat_updated().
This can indeed happen in the presence of IRQs/NMI.
Consider this scenario: Updater for cgroup stat C on CPU A in process
context is after llist_on_list() check and before this_cpu_cmpxchg() in
css_rstat_updated() where it get interrupted by IRQ/NMI. In the IRQ/NMI
context, a new updater calls css_rstat_updated() for same cgroup C and
successfully inserts rstatc_pcpu->lnode.
Now concurrently CPU B is running the flusher and it calls
llist_del_first_init() for CPU A and got rstatc_pcpu->lnode of cgroup C
which was added by the IRQ/NMI updater.
Now imagine CPU B calling init_llist_node() on cgroup C's
rstatc_pcpu->lnode of CPU A and on CPU A, the process context updater
calling this_cpu_cmpxchg(rstatc_pcpu->lnode) concurrently.
The CMPXCNG without LOCK on CPU A is not safe and thus we need LOCK
prefix.
In Meta's fleet running the kernel with the commit 36df6e3dbd7e, we are
observing on some machines the memcg stats are getting skewed by more
than the actual memory on the system. On close inspection, we noticed
that lockless node for a workload for specific CPU was in the bad state
and thus all the updates on that CPU for that cgroup was being lost.
To confirm if this skew was indeed due to this CMPXCHG without LOCK in
css_rstat_updated(), we created a repro (using AI) at [1] which shows
that CMPXCHG without LOCK creates almost the same lnode corruption as
seem in Meta's fleet and with LOCK CMPXCHG the issue does not
reproduces.
Link: http://lore.kernel.org/efiagdwmzfwpdzps74fvcwq3n4cs36q33ij7eebcpssactv3zu@se4hqiwxcfxq [1]
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: stable@vger.kernel.org # v6.17+
Fixes: 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi safe")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
NULL next
Early when trying to get sched_ext and proxy-exe working together,
I kept tripping over NULL ptr in put_prev_task_scx() on the line:
if (sched_class_above(&ext_sched_class, next->sched_class)) {
Which was due to put_prev_task() passes a NULL next, calling:
prev->sched_class->put_prev_task(rq, prev, NULL);
put_prev_task_scx() already guards for a NULL next in the
switch_class case, but doesn't seem to have a guard for
sched_class_above() check.
I can't say I understand why this doesn't trip usually without
proxy-exec. And in newer kernels there are way fewer
put_prev_task(), and I can't easily reproduce the issue now
even with proxy-exec.
But we still have one put_prev_task() call left in core.c that
seems like it could trip this, so I wanted to send this out for
consideration.
tj: put_prev_task() can be called with NULL @next; however, when @p is
queued, that doesn't happen, so this condition shouldn't currently be
triggerable. The connection isn't straightforward or necessarily reliable,
so add the NULL check even if it can't currently be triggered.
Link: http://lkml.kernel.org/r/20251206022218.1541878-1-jstultz@google.com
Signed-off-by: John Stultz <jstultz@google.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This commit use kthread_destroy_worker() to release sch->helper
objects to fix the following kmemleak:
unreferenced object 0xffff888121ec7b00 (size 128):
comm "scx_simple", pid 1197, jiffies 4295884415
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................
backtrace (crc 587b3352):
kmemleak_alloc+0x62/0xa0
__kmalloc_cache_noprof+0x28d/0x3e0
kthread_create_worker_on_node+0xd5/0x1f0
scx_enable.isra.210+0x6c2/0x25b0
bpf_scx_reg+0x12/0x20
bpf_struct_ops_link_create+0x2c3/0x3b0
__sys_bpf+0x3102/0x4b00
__x64_sys_bpf+0x79/0xc0
x64_sys_call+0x15d9/0x1dd0
do_syscall_64+0xf0/0x470
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: bff3b5aec1b7 ("sched_ext: Move disable machinery into scx_sched")
Cc: stable@vger.kernel.org # v6.16+
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In mailbox_get_msg(), mailbox_reg_read_non_zero() is called to poll for a
non-zero tail pointer. This assumed that a zero value indicates an error.
However, certain corner cases legitimately produce a zero tail pointer.
To handle these cases, remove mailbox_reg_read_non_zero(). The zero tail
pointer will be treated as a valid rewind event.
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251204181603.793824-1-lizhi.hou@amd.com
|
|
Clang is not happy about set but (in some cases) unused variable:
fs/nfsd/export.c:1027:17: error: variable 'inode' set but not used [-Werror,-Wunused-but-set-variable]
since it's used as a parameter to dprintk() which might be configured
a no-op. To avoid uglifying code with the specific ifdeffery just mark
the variable __maybe_unused.
The commit [1], which introduced this behaviour, is quite old and hence
the Fixes tag points to the first of the Git era.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0431923fb7a1 [1]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page.
Fixes: d7cc73972661 ("svcrdma: support multiple Read chunks per RPC")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The function comment specifies 0 on success and -EINVAL on invalid
parameters. Make the tail return 0 after a successful copy loop.
Fixes: d7cc73972661 ("svcrdma: support multiple Read chunks per RPC")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rdma_copy_inline_range added rc_curpage (page index) to the page
base instead of the byte offset rc_pageoff. Use rc_pageoff so copies
land within the current page.
Found by ZeroPath (https://zeropath.com)
Fixes: 8e122582680c ("svcrdma: Move svc_rdma_read_info::ri_pageno to struct svc_rdma_recv_ctxt")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_proxy_verf
A zero length gss_token results in pages == 0 and in_token->pages[0]
is NULL. The code unconditionally evaluates
page_address(in_token->pages[0]) for the initial memcpy, which can
dereference NULL even when the copy length is 0. Guard the first
memcpy so it only runs when length > 0.
Fixes: 5866efa8cbfb ("SUNRPC: Fix svcauth_gss_proxy_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The overhead of enforcing the DMA-buf rules for importers is now so low
that it safe to enable it by default on DEBUG kernels.
This will hopefully result in fixing more issues in importers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20251205130604.1582-2-christian.koenig@amd.com
|
|
This debugging hack is important to enforce the rule that importers
should *never* touch the underlying struct page of the exporter.
Instead of just mangling the page link create a copy of the sg_table
but only copy over the DMA addresses and not the pages.
This will cause a NULL pointer de-reference if the importer tries to
touch the struct page. Still quite a hack but this at least allows the
exporter to properly keeps it's sg_table intact while allowing the
DMA-buf maintainer to find and fix misbehaving importers and finally
switch over to using a different data structure in the future.
v2: improve the hack further by using a wrapper structure and explaining
the background a bit more in the commit message.
v3: fix some whitespace issues, use sg_assign_page().
v4: give the functions a better name
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20251205130604.1582-1-christian.koenig@amd.com
|
|
All the objects that need to implement some callbacks in KMS have a
pointer in there structure to the main drm_device.
However, it's not the case for drm_private_objs, which makes it harder
than it needs to be to implement some of its callbacks. Let's add that
pointer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251014-drm-private-obj-reset-v2-1-6dd60e985e9d@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
If an APICv status updated was pended while L2 was active, immediately
refresh vmcs01's controls instead of pending KVM_REQ_APICV_UPDATE as
kvm_vcpu_update_apicv() only calls into vendor code if a change is
necessary.
E.g. if APICv is inhibited, and then activated while L2 is running:
kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> apic->apicv_active = true
|
-> vmx_refresh_apicv_exec_ctrl()
|
-> vmx->nested.update_vmcs01_apicv_status = true
|
-> return
Then L2 exits to L1:
__nested_vmx_vmexit()
|
-> kvm_make_request(KVM_REQ_APICV_UPDATE)
vcpu_enter_guest(): KVM_REQ_APICV_UPDATE
-> kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> return // because if (apic->apicv_active == activate)
Reported-by: Chao Gao <chao.gao@intel.com>
Closes: https://lore.kernel.org/all/aQ2jmnN8wUYVEawF@intel.com
Fixes: 7c69661e225c ("KVM: nVMX: Defer APICv updates while L2 is active until L1 is active")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
[sean: write changelog]
Link: https://patch.msgid.link/20251205231913.441872-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The APICv (apic->apicv_active) can be activated or deactivated at runtime,
for instance, because of APICv inhibit reasons. Intel VMX employs different
mechanisms to virtualize LAPIC based on whether APICv is active.
When APICv is activated at runtime, GUEST_INTR_STATUS is used to configure
and report the current pending IRR and ISR states. Unless a specific vector
is explicitly included in EOI_EXIT_BITMAP, its EOI will not be trapped to
KVM. Intel VMX automatically clears the corresponding ISR bit based on the
GUEST_INTR_STATUS.SVI field.
When APICv is deactivated at runtime, the VM_ENTRY_INTR_INFO_FIELD is used
to specify the next interrupt vector to invoke upon VM-entry. The
VMX IDT_VECTORING_INFO_FIELD is used to report un-invoked vectors on
VM-exit. EOIs are always trapped to KVM, so the software can manually clear
pending ISR bits.
There are scenarios where, with APICv activated at runtime, a guest-issued
EOI may not be able to clear the pending ISR bit.
Taking vector 236 as an example, here is one scenario.
1. Suppose APICv is inactive. Vector 236 is pending in the IRR.
2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR,
and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq().
3. After VM-entry, vector 236 is invoked through the guest IDT. At this
point, the data in VM_ENTRY_INTR_INFO_FIELD is no longer valid. The guest
interrupt handler for vector 236 is invoked.
4. Suppose a VM exit occurs very early in the guest interrupt handler,
before the EOI is issued.
5. Nothing is reported through the IDT_VECTORING_INFO_FIELD because
vector 236 has already been invoked in the guest.
6. Now, suppose APICv is activated. Before the next VM-entry, KVM calls
kvm_vcpu_update_apicv() to activate APICv.
7. Unfortunately, GUEST_INTR_STATUS.SVI is not configured, although
vector 236 is still pending in the ISR.
8. After VM-entry, the guest finally issues the EOI for vector 236.
However, because SVI is not configured, vector 236 is not cleared.
9. ISR is stalled forever on vector 236.
Here is another scenario.
1. Suppose APICv is inactive. Vector 236 is pending in the IRR.
2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR,
and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq().
3. VM-exit occurs immediately after the next VM-entry. The vector 236 is
not invoked through the guest IDT. Instead, it is saved to the
IDT_VECTORING_INFO_FIELD during the VM-exit.
4. KVM calls kvm_queue_interrupt() to re-queue the un-invoked vector 236
into vcpu->arch.interrupt. A KVM_REQ_EVENT is requested.
5. Now, suppose APICv is activated. Before the next VM-entry, KVM calls
kvm_vcpu_update_apicv() to activate APICv.
6. Although APICv is now active, KVM still uses the legacy
VM_ENTRY_INTR_INFO_FIELD to re-inject vector 236. GUEST_INTR_STATUS.SVI is
not configured.
7. After the next VM-entry, vector 236 is invoked through the guest IDT.
Finally, an EOI occurs. However, due to the lack of GUEST_INTR_STATUS.SVI
configuration, vector 236 is not cleared from the ISR.
8. ISR is stalled forever on vector 236.
Using QEMU as an example, vector 236 is stuck in ISR forever.
(qemu) info lapic 1
dumping local APIC state for CPU 1
LVT0 0x00010700 active-hi edge masked ExtINT (vec 0)
LVT1 0x00010400 active-hi edge masked NMI
LVTPC 0x00000400 active-hi edge NMI
LVTERR 0x000000fe active-hi edge Fixed (vec 254)
LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0)
LVTT 0x000400ec active-hi edge tsc-deadline Fixed (vec 236)
Timer DCR=0x0 (divide by 2) initial_count = 0 current_count = 0
SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255
ICR 0x000000fd physical edge de-assert no-shorthand
ICR2 0x00000000 cpu 0 (X2APIC ID)
ESR 0x00000000
ISR 236
IRR 37(level) 236
The issue isn't applicable to AMD SVM as KVM simply writes vmcb01 directly
irrespective of whether L1 (vmcs01) or L2 (vmcb02) is active (unlike VMX,
there is no need/cost to switch between VMCBs). In addition,
APICV_INHIBIT_REASON_IRQWIN ensures AMD SVM AVIC is not activated until
the last interrupt is EOI'd.
Fix the bug by configuring Intel VMX GUEST_INTR_STATUS.SVI if APICv is
activated at runtime.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251110063212.34902-1-dongli.zhang@oracle.com
[sean: call out that SVM writes vmcb01 directly, tweak comment]
Link: https://patch.msgid.link/20251205231913.441872-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
All objects are supposed to have a minimal alignment of two, since a
couple of instructions only work with even addresses. Add the missing
align statement for the file string.
Fixes: 6584ff203aec ("bugs/s390: Use 'cond_str' in __EMIT_BUG()")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fallback to generic BUG implementation in case CONFIG_BUG is disabled.
This restores the old behaviour before 'cond_str' support was added.
It probably doesn't matter, since nobody should disable CONFIG_BUG, but at
least this is consistent to before.
Fixes: 6584ff203aec ("bugs/s390: Use 'cond_str' in __EMIT_BUG()")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix 'level-shit' to 'level-shift' in struct snd_cea_861_aud_if comment.
Fixes: 7ba1c40b536e ("ALSA: Add definitions for CEA-861 Audio InfoFrames")
Signed-off-by: Andres J Rosa <andyrosa@gmail.com>
Link: https://patch.msgid.link/20251203162509.1822-1-andyrosa@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The newly introduced "reasons" attribute already signifies possible
reasons for throttling and makes the prefix in individual attribute
names redundant while emitting them as an array. Skip the prefix.
Fixes: 83ccde67a3f7 ("drm/xe/gt_throttle: Avoid TOCTOU when monitoring reasons")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Link: https://patch.msgid.link/20251203123355.571606-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks.
Fixes: 5deafa27d9ae ("KVM: s390: Fix to clear PTE when discarding a swapped page")
Cc: stable@vger.kernel.org
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add a config for the v1.2.5 CCI found on msm8953 which has different
values in .params compared to others already supported in the driver.
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.19
- general cleanups in bcm2835, designware, pcf8584, and stm32
- amd-mp2: fix device refcount
- designware: avoid interrupt storms caused by bad firmware
- i801: fix supported features
- spacemit: fix device detection failures
New device support:
- Intel Diamond Rapids
- Rockchip RK3506
- Qualcomm Kaanapali, MSM8953
|
|
Add loongson32_defconfig (for 32BIT) and rename loongson3_defconfig to
loongson64_defconfig (for 64BIT).
Also adjust graphics drivers, such as FB_EFI is replaced with EFIDRM.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust VDSO/VSYSCALL because read_cpu_id() for 32BIT/64BIT are
different, and LoongArch32 doesn't support GENERIC_GETTIMEOFDAY now
(will be supported in future).
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust misc routines for both 32BIT and 64BIT, including: bitops, bswap,
checksum, string, jump label, unaligned access emulator, suspend/wakeup
routines, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust user accessors for both 32BIT and 64BIT, including: get_user(),
put_user(), copy_user(), clear_user(), etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust system call for both 32BIT and 64BIT, including: add the uapi
unistd_{32,64}.h and syscall_table_{32,64}.h inclusion, add sys_mmap2()
definition, change the system call entry routines, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust module loader for both 32BIT and 64BIT, including: change the s64
type to long, change the u64 type to unsigned long, change the plt entry
definition and handling, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust time routines for both 32BIT and 64BIT, including: rdtime_h() /
rdtime_l() definitions for 32BIT and rdtime_d() definition for 64BIT,
get_cycles() and get_cycles64() definitions for 32BIT/64BIT, show time
frequency info ("CPU MHz" and "BogoMIPS") in /proc/cpuinfo, etc.
Use do_div() for division which works on both 32BIT and 64BIT platforms.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust process management for both 32BIT and 64BIT, including: CPU
context switching, FPU loading/restoring, process dumping and process
tracing routines.
Q: Why modify switch.S?
A: LoongArch32 has no ldptr.d/stptr.d instructions, and asm offsets of
thead_struct members are too large to be filled in the 12b immediate
field of ld.w/st.w.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust memory management for both 32BIT and 64BIT, including: address
space definition, DMW CSR definition, page table bits definition, boot
time detection of VA/PA bits, page table init, tlb exception handling,
copy_page/clear_page/dump_tlb libraries, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Yawei Li <liyawei@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust boot & setup for both 32BIT and 64BIT, including: efi header
definition, MAX_IO_PICS definition, kernel entry and environment setup
routines, etc.
Add a fallback path in fdt_cpu_clk_init() to avoid 0MHz in /proc/cpuinfo
if there is no valid clock freq from firmware.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add a paragraph to the GEM Objects Creation section about the
drm_gem_huge_mnt_create() helper and to the GEM objects mapping
section explaining how transparent huge pages are handled by GEM.
v4:
- fix wording after huge_pages handler removal
v6:
- fix wording after map_pages handler removal
v11:
- mention drm_gem_huge_mnt_create() helper
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-11-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Introduce the 'panfrost.transparent_hugepage' boolean module parameter
(false by default). When the parameter is set to true, a new tmpfs
mountpoint is created and mounted using the 'huge=within_size'
option. It's then used at GEM object creation instead of the default
'shm_mnt' mountpoint in order to enable Transparent Hugepage (THP) for
the object (without having to rely on a system wide parameter).
v3:
- use huge tmpfs mountpoint in drm_device
v4:
- fix builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- clean up mountpoint creation error handling
- print negative error value
v5:
- use drm_gem_has_huge_tmp() helper
- get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs
v9:
- replace drm_gem_has_huge_tmp() by drm_gem_get_huge_tmp()
v11:
- enable 'panfrost.transparent_hugepage' by default
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-10-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Introduce the 'panthor.transparent_hugepage' boolean module parameter
(false by default). When the parameter is set to true, a new tmpfs
mountpoint is created and mounted using the 'huge=within_size'
option. It's then used at GEM object creation instead of the default
'shm_mnt' mountpoint in order to enable Transparent Hugepage (THP) for
the object (without having to rely on a system wide parameter).
v3:
- use huge tmpfs mountpoint in drm_device
v4:
- fix builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- clean up mountpoint creation error handling
- print negative error value
v5:
- use drm_gem_has_huge_tmp() helper
- get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs
v9:
- replace drm_gem_has_huge_tmp() by drm_gem_get_huge_tmp()
v11:
- enable 'panthor.transparent_hugepage' by default
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-9-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
drm_gem_object_init_with_mnt() and drm_gem_shmem_create_with_mnt() can
be removed now that the drivers use the new drm_gem_huge_mnt_create()
and drm_gem_get_huge_mnt() helpers.
v5:
- use drm_gem_has_huge_mnt() helper
- compile out shmem_file_setup_with_mnt() call in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() with drm_gem_get_huge_mnt()
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-8-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Make use of the new drm_gem_huge_mnt_create() and
drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that
it's just a few lines long, the single function in v3d_gemfs.c is
moved into v3d_gem.c.
v3:
- use huge tmpfs mountpoint in drm_device
- move v3d_gemfs.c into v3d_gem.c
v4:
- clean up mountpoint creation error handling
v5:
- fix CONFIG_TRANSPARENT_HUGEPAGE check
- use drm_gem_has_huge_mnt() helper
v8:
- don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v10:
- get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs
v11:
- remove superfluous comment
- add Maíra and Boris R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-7-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Make use of the new drm_gem_huge_mnt_create() and
drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that
it's just a few lines long, the single function in i915_gemfs.c is
moved into i915_gem_shmem.c.
v3:
- use huge tmpfs mountpoint in drm_device
- move i915_gemfs.c into i915_gem_shmem.c
v4:
- clean up mountpoint creation error handling
v5:
- use drm_gem_has_huge_mnt() helper
v7:
- include <drm/drm_print.h> in i915_gem_shmem.c
v8:
- keep logging notice message with CONFIG_TRANSPARENT_HUGEPAGE=n
- don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
- remove useless ternary op test in selftests/huge_pages.c
v12:
- fix layering violation in selftests (Tvrtko)
- fix incorrect filename in commit message
v13:
- add Tvrtko A-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patch.msgid.link/20251205182231.194072-6-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add the drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers
to avoid code duplication in the i915, V3D, Panfrost and Panthor
drivers. The former creates and mounts a dedicated huge tmpfs
mountpoint, for the lifetime of a DRM device, used at GEM object
initialization. The latter retrieves the dedicated huge tmpfs
mountpoint used by a DRM device.
The next commits will port drivers to these helpers.
v3:
- store huge tmpfs mountpoint in drm_device
v4:
- return 0 in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- return 0 when huge_mnt already exists
- use new vfs_parse_fs_string() helper
v5:
- remove warning on !dev->huge_mnt and reset to NULL on free
- inline drm_gem_huge_mnt_create() to remove func from text and avoid
calls in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- compile out drm_device's huge_mnt field in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
- add drm_gem_has_huge_mnt() helper
v6:
- move huge_mnt doc into ifdef'd section
- either inline or export drm_gem_huge_mnt_create()
v7:
- include <drm/drm_device.h> in drm_gem.h
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v11:
- doc fixes
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-5-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
mmap() calls on the DRM file pointer currently always end up using
mm_get_unmapped_area() to get a free mapping region. On builds with
CONFIG_TRANSPARENT_HUGEPAGE enabled, this isn't ideal for GEM objects
backed by shmem buffers on mountpoints setting the 'huge=' option
because it can't correctly figure out the potentially huge address
alignment required.
This commit introduces the drm_gem_get_unmapped_area() function which
is meant to be used as a get_unmapped_area file operation on the DRM
file pointer to lookup GEM objects based on their fake offsets and get
a properly aligned region by calling shmem_get_unmapped_area() with
the right file pointer. If a GEM object isn't available at the given
offset or if the caller isn't granted access to it, the function falls
back to mm_get_unmapped_area().
This also makes drm_gem_get_unmapped_area() part of the default GEM
file operations so that all the DRM drivers can benefit from more
efficient mappings thanks to the huge page fault handler introduced in
previous commit 'drm/shmem-helper: Add huge page fault handler'.
The shmem_get_unmapped_area() function needs to be exported so that
it can be used from the DRM subsystem.
v3:
- include <linux/sched/mm.h> in drm_gem.c
- forward to shmem layer in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
v6:
- use GPL variant to export drm_gem_get_unmapped_area()
- don't export shmem_get_unmapped_area() anymore (use f_op instead)
v11:
- rename drm_gem_object_lookup_from_offset() to
drm_gem_object_lookup_at_offset()
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-4-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Attempt a PMD sized PFN insertion into the VMA if the faulty address
of the fault handler is part of a huge page.
On builds with CONFIG_TRANSPARENT_HUGEPAGE enabled, if the mmap() user
address is PMD size aligned, if the GEM object is backed by shmem
buffers on mountpoints setting the 'huge=' option and if the shmem
backing store manages to allocate a huge folio, CPU mapping would then
benefit from significantly increased memcpy() performance. When these
conditions are met on a system with 2 MiB huge pages, an aligned copy
of 2 MiB would raise a single page fault instead of 4096.
v4:
- implement map_pages instead of huge_fault
v6:
- get rid of map_pages handler for now (keep it for another series
along with arm64 contpte support)
v11:
- remove page fault validity check helper
- rename drm_gem_shmem_map_pmd() to drm_gem_shmem_try_map_pmd()
- add Boris R-b
v12:
- move up ret var decl in fault handler to minimize diff
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-3-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
For a fault at address addr, the page offset is
page_offset = (vmf->address - vma->vm_start) >> PAGE_SHIFT
= ((addr & PAGE_MASK) - vma->vm_start) >> PAGE_SHIFT
= (addr - vma->vm_start) >> PAGE_SHIFT
Since the faulty logical page offset based on VMA is
vmf->pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT)
We can slightly simplify the calculation using
page_offset = vmf->pgoff - vma->vm_pgoff
v11:
- remove misleading comment
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-2-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
After commit a50f7456f853 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in
global scope"), the DMA_BIT_MASK() macro is broken when passed non trivial
statements for the value of 'n'. This is caused by the new version missing
parenthesis around 'n' when evaluating 'n'.
One example of this breakage is the IPU6 driver now crashing due to
it getting DMA-addresses with address bit 32 set even though it has
tried to set a 32 bit DMA mask.
The IPU6 CSI2 engine has a DMA mask of either 31 or 32 bits depending
on if it is in secure mode or not and it sets this masks like this:
mmu_info->aperture_end =
(dma_addr_t)DMA_BIT_MASK(isp->secure_mode ?
IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE);
So the 'n' argument here is "isp->secure_mode ? IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE" which gets expanded into:
isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE - 1
With the -1 only being applied in the non secure case, causing
the secure mode mask to be one 1 bit too large.
Fixes: a50f7456f853 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope")
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251207184756.97904-1-johannes.goede@oss.qualcomm.com
|
