| Age | Commit message (Collapse) | Author |
|---|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-20-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a proper error path for when registration fails so that the probe
tests for errors consistently.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-19-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-18-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-17-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-16-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-15-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-14-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-13-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-12-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-11-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-10-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-9-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-8-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-7-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260505072909.618363-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Marco Crivellari <marco.crivellari@suse.com> says:
Currently the code uses the per-cpu workqueue system_long_wq to schedule
long running works.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Another good reason to have this unbound,
is the "queue_delayed_work()" function, used to enqueue the work item.
More details on this will follow in the next section.
Recently, a new unbound workqueue specific for long running work has been
added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
~~~ Details about queue_delayed_work ~~~
system_long_wq is a per-cpu workqueue and it is used as a parameter of
queue_delayed_work(). This function schedule an item that it will later
be enqueued (once the timer will fire). __queue_delayed_work() does the job
receiving as "cpu" WORK_CPU_UNBOUND:
if (housekeeping_enabled(HK_TYPE_TIMER)) {
// [....]
} else {
if (likely(cpu == WORK_CPU_UNBOUND))
add_timer_global(timer);
else
add_timer_on(timer, cpu);
}
The timer is global, so can fire everywhere, and the work item will be
enqueued where the timer fired.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change the
workqueue with the new system_dfl_long_wq, so that the used workqueue is
now unbound and can benefit from scheduler task placement.
|
|
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260508150327.351779-3-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move long delayed work on system_dfl_long_wq
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Cc: David Rhodes <david.rhodes@cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260508150327.351779-2-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The eukrea-tlv320 driver contains checks for ARM machine IDs via
machine_is_*() macros. The boards concerned now support only FDT
booting, which does not use machine IDs, and therefore the code should
be updated to check the DT compatible property instead.
Non-DT booting support for these machines was removed in these
commits:
commit f2f55499942a ("ARM: imx: Remove eukrea_mbimxsd35 non-dt support")
commit 3877942b0c7f ("ARM: imx25: Remove eukrea mx25 board files")
commit 7c5deaf77526 ("ARM: i.MX: Remove mach-cpuimx27sd board file")
commit 8da4d6b2f798 ("ARM: mx51: Remove mach-cpuimx51sd board file")
The presence of these machine ID checks prevents the removal of
machine IDs no longer used by the kernel from arch/arm/tools/mach-types,
because the machine_is_*() macros are generated from mach-types. To
resolve this issue, use of_machine_is_compatible() instead.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260510221403.11283-1-enelsonmoore@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixes a typo in Kconfig, 'protectorvia' -> 'protector via'.
Signed-off-by: Ihor Matushchak <ihor.matushchak@foobox.net>
Link: https://patch.msgid.link/20260508084933.4076-1-ihor.matushchak@foobox.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On platforms where the HID2 SPI controller (AMDI0063) is enumerated via
ACPI instead of PCI, amd_spi_probe() unconditionally sets bus_num to 0,
while the PCI probe path assigns bus_num 2 for HID2 controller.
Align the ACPI probe path to use the same bus number so that userspace
and SPI client drivers see a consistent bus assignment regardless of the
enumeration method.
Fixes: b644c2776652 ("spi: spi_amd: Add PCI-based driver for AMD HID2 SPI controller")
Cc: stable@vger.kernel.org # v6.16+
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Link: https://patch.msgid.link/20260507180051.4158674-1-krishnamoorthi.m@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
constraints
A phandle-array is really a matrix and needs constraints on the number
of elements for both the inner and outer dimensions. Add the missing
inner constraints.
Fixes: 472d77bdc511 ("ASoC: dt-bindings: mediatek,mt8173-rt5650-rt5514: convert to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260508182438.1757394-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As I cannot spend adequate time to fulfill my role as maintainer for the
TI ASoC drivers, it is for the better if I resign and hand over the role
to Sen Wang.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20260505164744.16134-1-peter.ujfalusi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Conflict between:
[1] 41e3312861ea ("sched_ext: add p->scx.tid and SCX_OPS_TID_TO_TASK lookup")
[2] c941d7391f25 ("sched_ext: Close root-enable vs sched_ext_dead() race with SCX_TASK_INIT_BEGIN")
in scx_root_enable_workfn()'s post-init block. [1] added a tid hash
insertion under a scoped_guard() for scx_tasks_lock; [2] wraps the same
region in task_rq_lock() for a DEAD recheck. A naive merge would invert the
iter's outer/inner order.
[3] f25ad1e3cbaa ("sched_ext: Add scx_task_iter_relock() and use it in scx_root_enable_workfn()")
was added to for-7.2 for a clean resolution: scx_task_iter_relock(iter, p)
takes both scx_tasks_lock and @p's rq lock in iter order.
Resolved by routing both sides through [3]'s dual-lock helper: the post-init
region runs under a single scx_task_iter_relock() acquisition, with [2]'s
state machine and [1]'s hash insert in sequence inside it.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_root_enable_workfn()'s post-init block re-acquires scx_tasks_lock
briefly via a scoped_guard() for the tid hash insertion. c941d7391f25
("sched_ext: Close root-enable vs sched_ext_dead() race with
SCX_TASK_INIT_BEGIN") on for-7.1-fixes adds a post-init DEAD recheck that
holds the task's rq lock across the state-machine updates in the same
region. A naive merge would acquire scx_tasks_lock while the rq lock is
held, inverting the iter's outer/inner order (scx_tasks_lock then rq lock).
Add scx_task_iter_relock(iter, p), the counterpart to
scx_task_iter_unlock(), that re-acquires scx_tasks_lock and, if @p is
non-NULL, @p's rq lock. The locks are tracked in @iter so subsequent
iteration releases them.
Use it in scx_root_enable_workfn()'s post-init block and drop the
now-redundant scoped_guard on the hash insertion. The post-init region now
runs with both scx_tasks_lock and the task's rq lock held across the init
failure check, the state-machine updates and the hash insert.
v2: Move scx_task_iter_relock() earlier to ease the for-7.1-fixes merge.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Clippy 1.97 introduces new `useless_borrows_in_formatting` warning which
fires on the examples as we have `&*expr` where the format macro takes
reference already. Remove the extra borrow.
Link: https://patch.msgid.link/20260505115138.2466966-1-gary@kernel.org
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
Tuples implement `FromIterator` since Rust 1.79. Remove the `collect_tuple`
polyfill now the MSRV is above 1.79.
To avoid over-identing the closure, I move the `Field` destructure from the
closure parameter to a let binding. This keeps the diff small.
Link: https://patch.msgid.link/20260501134445.3809731-1-gary@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
The `PhantomPinned` detection is just a lint, and is emitted as an error
because there is no `compile_warning!()` macro, and
`proc-macro-diagnostics` is not stable.
Use of `#[deprecated = ""]` attribute to approximate custom proc-macro
warnings. A new line is added before message for visual clarity.
An example warning with this trick looks like this:
warning: use of deprecated function `_::warn`:
The field `pin` of type `PhantomPinned` only has an effect if it has the `#[pin]` attribute
--> test.rs:9:5
|
9 | pin: marker::PhantomPinned,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/pin-init/issues/51
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-10-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
The workaround mentions it's for Rust versions before 1.81. The minimum is
now 1.82, thus clean up.
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-9-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
The old CI workflow has been deleted ~1 year ago. Fix the URL to point to
the correct one.
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-8-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
The pin-init crate has been licensed under `Apache-2.0 OR MIT` since the
beginning. I introduced in commit 071cedc84e90 ("rust: add derive macro for
`Zeroable`") `zeroable.rs` with incompatible GPL-2.0 SPDX identifier. The
file has not been modified by other authors, so relicense it under the
above license.
Signed-off-by: Benno Lossin <lossin@kernel.org>
[ Reworded commit message - Gary ]
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-7-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
The `generate_projections` and `generate_the_pin_data` function already
receive filtered field lists, they do not need to filter out `#[pin]`
again.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-6-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
`#[pin_data]` failed to propagate the struct's `where` clause to the
generated projection struct. As a result, bounds written in a `where`
clause could be dropped during expansion, causing type errors when
fields depended on those bounds.
Fix this by adding the missing `where` clause to the generated
projection struct.
Reported-by: Andreas Hindborg <a.hindborg@kernel.org>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/generic.20bounds.20and.20.60.23.5Bpin_data.5D.60/with/578381591
Signed-off-by: Mohamad Alsadhan <mo@sdhn.cc>
Reviewed-by: Gary Guo <gary@garyguo.net>
[ Reworded commit message - Gary ]
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-5-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
Improve impl_zeroable_option macro to handle generic impls for types
like `&T`, `&mut T`, `NonNull<T>`, and others (for which `Option<T>`
is guaranteed to be zeroable) with similar approach to
`impl_zeroable`.
Also, update old declarations to use generics e.g. `NonZeroU8` to
`NonZero<u8>`.
Signed-off-by: Mohamad Alsadhan <mo@sdhn.cc>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-4-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
Place definitions and implementations (incl. macro invocations) of
the `Zeroable` trait first in the relevant section of `src/lib.rs`,
followed by the ZeroableOption trait and its implementations.
Rename `impl_non_zero_int_zeroable_option` to `impl_zeroable_option`
for consistency.
This commit should not introduce any functional changes.
Signed-off-by: Mohamad Alsadhan <mo@sdhn.cc>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-3-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
Following the kernel minimum version bump in commit f32fb9c58a5b ("rust:
bump Rust minimum supported version to 1.85.0 (Debian Trixie)"), bump
pin-init's minimum Rust version to 1.82.
This removes the `lint_reasons` feature which is stabilized in 1.81 and the
`raw_ref_ops` and `new_uninit` features which are stabilized in 1.82.
Given we do not use any features that are stabilized in 1.82..=1.85 range,
and pin-init crate is useful for other projects which may have their own
MSRV requirements, the minimum version is not straightly bumped to 1.85.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-2-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
There was a recent request in kernel [1] to mark as `#[inline]` the
simple `From::from()` functions implemented for `Error`.
Thus mark all of the existing
impl From<...> for Error {
fn from(err: ...) -> Self {
...
}
}
functions as `#[inline]`.
While in pin-init crate the relevant code is just examples, it
nevertheless does not hurt to use good practice for them.
Suggested-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/all/8403c8b7a832b5274743816eb77abfa4@garyguo.net/ [1]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
[ Reworded commit message - Gary ]
Link: https://patch.msgid.link/20260428-pin-init-sync-v1-1-07f9bd3859fb@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
scx_fail_parent() leaves cgroup tasks at (state=NONE, sched=parent,
sched_class=ext) until the parent itself is torn down by the scx_error() it
raised. When the later root_disable iterates them, two paths trip on NONE.
scx_disable_and_exit_task() re-enters the wrapper at NONE: the inner switch
returns early but the trailing scx_set_task_sched(p, NULL) clobbers the
parent sched left by scx_fail_parent(), and scx_set_task_state(p, NONE)
wastes a write on an already-NONE task. switched_from_scx() then calls
scx_disable_task(), which WARNs on non-ENABLED state and writes state=READY,
producing a NONE -> READY transition the validation matrix rejects.
Treat NONE as "nothing to do" in both paths. Add a NONE early-return at the
top of scx_disable_and_exit_task() and a parallel NONE check in
switched_from_scx() next to task_dead_and_done().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_sub_enable_workfn()'s init pass and scx_sub_disable() migration both
drop the rq lock to call __scx_init_task() against the other sched. A
TASK_DEAD @p can fall through sched_ext_dead() in that window.
sched_ext_dead() runs ops.exit_task() on the sched @p was attached to, not
on the sched whose init just completed, so the new allocation leaks.
Reuse the DEAD signal set by sched_ext_dead(). After __scx_init_task()
returns, take task_rq_lock(p) and check for DEAD; on hit, call
scx_sub_init_cancel_task() against the sub sched the init ran for and drop
@p; on miss, proceed as before.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_root_enable_workfn() drops the iter rq lock for ops.init_task() and a
TASK_DEAD @p can fall through sched_ext_dead() in that window. The race hits
when sched_ext_dead() observes SCX_TASK_INIT (the intermediate state before
@p->scx.sched is published) and dereferences NULL via SCX_HAS_OP(NULL,
exit_task), or observes SCX_TASK_NONE during the unlocked init window and
skips cleanup so exit_task() never runs.
Add SCX_TASK_INIT_BEGIN. The enable path writes NONE -> INIT_BEGIN under the
iter rq lock, then takes the rq lock again after init to walk INIT_BEGIN ->
INIT -> READY. sched_ext_dead() that wins the rq-lock race observes
INIT_BEGIN and sets DEAD without calling into ops; the post-init recheck
unwinds via scx_sub_init_cancel_task().
scx_fork() runs single-threaded against sched_ext_dead() (the task is not on
scx_tasks until scx_post_fork() adds it) so its INIT_BEGIN -> INIT walk
needs no rq-lock pairing; it rolls back to NONE on ops.init_task() failure.
The validation matrix grows the INIT_BEGIN row and the INIT_BEGIN -> DEAD
edge; INIT now requires INIT_BEGIN as the predecessor. scx_sub_disable()'s
migration writes INIT_BEGIN as a synthetic predecessor to satisfy the
tightened verification.
The sub-sched paths still race with sched_ext_dead() during the unlocked
init window. This will be fixed by the next patch.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
SCX_TASK_OFF_TASKS marked tasks already through sched_ext_dead() so cgroup
task iteration would skip them. This can be expressed better with a task
state. Replace the flag with SCX_TASK_DEAD.
scx_disable_and_exit_task() resets state to NONE on its way out, so
sched_ext_dead() now sets DEAD after the wrapper returns. The validation
matrix grows NONE -> DEAD, warns on DEAD -> NONE, and tightens READY's
predecessor to INIT or ENABLED so the new DEAD value cannot silently
transition to READY.
Prepares for the following enable vs dead race fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_set_task_state()
Prepare for the SCX_TASK_INIT_BEGIN/DEAD work that follows by collapsing the
scx_init_task() helper. Move the SCX_TASK_RESET_RUNNABLE_AT setting into
scx_set_task_state() on the INIT transition (it was set unconditionally at
every INIT site through the scx_init_task() helper), inline scx_init_task()
into scx_fork() and scx_root_enable_workfn(), and drop the helper.
As a side effect, scx_sub_disable() migration sequence now also sets
RESET_RUNNABLE_AT (it previously wrote INIT directly without going through
scx_init_task()). The flag triggers a runnable_at reset on the next
set_task_runnable(), which is harmless on a task that has just been moved
between scheds.
On root-enable, p->scx.flags is written without the task's rq lock. The task
isn't visible to scx yet, and a follow-up patch restores the lock-held
write.
v2: Note p->scx.flags rq-lock relaxation on root-enable path. (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Cleanups in preparation for the state-machine work that follows:
- Convert three sub-sched call sites that open-code
rcu_assign_pointer(p->scx.sched, ...) to scx_set_task_sched().
- Move scx_get_task_state()/scx_set_task_state() above the SCX task iter
section so scx_task_iter_next_locked() can use them without a forward
declaration.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Fix a string leak in the versalnet driver
* tag 'edac_urgent_for_v7.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versalnet: Fix device name memory leak
|
