| Age | Commit message (Collapse) | Author |
|---|
|
Factor out local_dsq_post_enq() which performs post-enqueue handling for
local DSQs - triggering resched_curr() if SCX_ENQ_PREEMPT is specified or if
the current CPU is idle. No functional change.
This will be used by the next patch to fix move_local_task_to_local_dsq().
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
If the call to btrfs_delalloc_reserve_metadata() fails we jump to the
'out_noreserve' label and there we never free the extent_changeset
allocated by the previous call to btrfs_check_data_free_space() (if
qgroups are enabled). Fix this by calling extent_changeset_free() under
the 'out_noreserve' label.
Fixes: 6599716de2d6 ("btrfs: fix -ENOSPC mmap write failure on NOCOW files/extents")
Reported-by: syzbot+2f8aa76e6acc9fce6638@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/693a635a.a70a0220.33cd7b.0029.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In open_seed_devices(), when find_fsid() fails and we're in DEGRADED
mode, a new fs_devices is allocated via alloc_fs_devices() but is never
added to the seed_list before returning. This contrasts with the normal
path where fs_devices is properly added via list_add().
If any error occurs later in read_one_dev() or btrfs_read_chunk_tree(),
the cleanup code iterates seed_list to free seed devices, but this
orphaned fs_devices is never found and never freed, causing a memory
leak. Any devices allocated via add_missing_dev() and attached to this
fs_devices are also leaked.
Fix this by adding the newly allocated fs_devices to seed_list in the
degraded path, consistent with the normal path.
Fixes: 5f37583569442 ("Btrfs: move the missing device to its own fs device list")
Reported-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eadd98df8bceb15d7fed
Tested-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add missing drm_gem_object_put() call when drm_gem_object_lookup()
successfully returns an object. This fixes a GEM object reference
leak that can prevent driver modules from unloading when using
prime buffers.
Fixes: 53096728b891 ("drm: Add DRM prime interface to reassign GEM handle")
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20251212134133.475218-1-karol.wachowski@linux.intel.com
|
|
Move the panic handling to the display parent interface, making display
more independent of i915 and xe driver implementations.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/e27eca5424479e8936b786018d0af19a34f839f6.1765474612.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The intel_panic.c implementation is i915 specific, and xe has its
own. Move it to i915 core as i915_panic.c.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/8dc7af0ae1f859d17b0be269a545146c5536d8fc.1765474612.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Fixes for some recent regressions as well as some longstanding issues:
- Fix incorrect output from the arm64 NEON implementation of GHASH
- Merge the ksimd scopes in the arm64 XTS code to reduce stack usage
- Roll up the BLAKE2b round loop on 32-bit kernels to greatly reduce
code size and stack usage
- Add missing RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS dependency
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
|
|
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix incorrect error code defines
- Add missing error code definitions
- Add parenthesis around NT_STATUS code defines to fix checkpatch
warnings
- Remove some duplicated protocol definitions, moving to common code
shared by client and server
- Add missing protocol documentation reference (for change notify)
- Correct struct definition (for duplicate_extents_to_file_ex)
* tag 'v6.19-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb/client: remove DeviceType Flags and Device Characteristics definitions
smb: move File Attributes definitions into common/fscc.h
smb: update struct duplicate_extents_to_file_ex
smb: move file_notify_information to common/fscc.h
smb: move SMB2 Notify Action Flags into common/smb2pdu.h
smb: move notify completion filter flags into common/smb2pdu.h
smb/client: add parentheses to NT error code definitions containing bitwise OR operator
smb: add documentation references for smb2 change notify definitions
smb/client: add 4 NT error code definitions
smb/client: fix NT_STATUS_UNABLE_TO_FREE_VM value
smb/client: fix NT_STATUS_DEVICE_DOOR_OPEN value
smb/client: fix NT_STATUS_NO_DATA_DETECTED value
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
|
|
To get the full benefit of:
eaa9088d568c ("rseq: Use static branch for syscall exit debug when GENERIC_IRQ_ENTRY=y")
clang needs an __always_inline instead of a plain inline qualifier:
$ for i in {1..10}; do taskset -c 4 perf5 bench syscall basic -l 100000000 | grep "ops/sec"; done
Before After
ops/sec 15424491 15872221 +2.9%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251205100753.4073221-1-edumazet@google.com
|
|
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Fixes: 5c47b7f3d1a9 ("bug: Add BUG_FORMAT_ARGS infrastructure")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251207-warn-printf-gcc-v1-1-b597d612b94b@google.com
|
|
report_bug_entry() always provides zero for bugaddr but could easily
extract the correct address from the provided bug_entry. Just do that to
have proper warning messages.
E.g. adding an artificial:
void foo(void) { WARN_ONCE(1, "bar"); }
function generates this warning message:
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
^^^
With the correct bug address this changes to:
WARNING: arch/s390/kernel/setup.c:1017 at foo+0x1c/0x40, CPU#0: swapper/0/0
^^^^^^^^^^^^^
Fixes: 7d2c27a0ec5e ("bug: Add report_bug_entry()")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251208200658.3431511-1-hca@linux.ibm.com
|
|
Fedora/CentOS/RHEL CI is reporting intermittent failures while running
the drm_validate_modeset test [1]:
# drm_test_check_connector_changed_modeset: EXPECTATION FAILED at
# drivers/gpu/drm/tests/drm_atomic_state_test.c:162
Expected ret == 0, but
ret == -35 (0xffffffffffffffdd)
Change the set_up_atomic_state() helper function to return on error and
restart the atomic sequence when the returned error is EDEADLK.
[1] https://s3.amazonaws.com/arr-cki-prod-trusted-artifacts/trusted-artifacts/2106744096/test_x86_64/11762450343/artifacts/jobwatch/logs/recipes/19797909/tasks/204139142/results/945095586/logs/dmesg.log
Fixes: 73d934d7b6e3 ("drm/tests: Add test for drm_atomic_helper_commit_modeset_disables()")
Closes: https://datawarehouse.cki-project.org/issue/4004
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patch.msgid.link/20251104102535.12212-2-jose.exposito89@gmail.com
|
|
Fedora/CentOS/RHEL CI is reporting intermittent failures while running
the drm_test_check_valid_clones() KUnit test.
The error log can be either [1]:
# drm_test_check_valid_clones: ASSERTION FAILED at
# drivers/gpu/drm/tests/drm_atomic_state_test.c:295
Expected ret == param->expected_result, but
ret == -35 (0xffffffffffffffdd)
param->expected_result == 0 (0x0)
Or [2] depending on the test case:
# drm_test_check_valid_clones: ASSERTION FAILED at
# drivers/gpu/drm/tests/drm_atomic_state_test.c:295
Expected ret == param->expected_result, but
ret == -35 (0xffffffffffffffdd)
param->expected_result == -22 (0xffffffffffffffea)
Restart the atomic sequence when EDEADLK is returned.
[1] https://s3.amazonaws.com/arr-cki-prod-trusted-artifacts/trusted-artifacts/2113057246/test_x86_64/11802139999/artifacts/jobwatch/logs/recipes/19824965/tasks/204347800/results/946112713/logs/dmesg.log
[2] https://s3.amazonaws.com/arr-cki-prod-trusted-artifacts/trusted-artifacts/2106744297/test_aarch64/11762450907/artifacts/jobwatch/logs/recipes/19797942/tasks/204139727/results/945094561/logs/dmesg.log
Fixes: 88849f24e2ab ("drm/tests: Add test for drm_atomic_helper_check_modeset()")
Closes: https://datawarehouse.cki-project.org/issue/4004
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patch.msgid.link/20251104102535.12212-1-jose.exposito89@gmail.com
|
|
EDEADLK
Fedora/CentOS/RHEL CI is reporting intermittent failures while running
the KUnit tests present in drm_hdmi_state_helper_test.c [1].
While the specific test causing the failure change between runs, all of
them are caused by drm_kunit_helper_enable_crtc_connector() returning
-EDEADLK. The error trace always follow this structure:
# <test name>: ASSERTION FAILED at
# drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c:<line>
Expected ret == 0, but
ret == -35 (0xffffffffffffffdd)
As documented, if the drm_kunit_helper_enable_crtc_connector() function
returns -EDEADLK (-35), the entire atomic sequence must be restarted.
Handle this error code for all function calls.
Closes: https://datawarehouse.cki-project.org/issue/4039 [1]
Fixes: 6a5c0ad7e08e ("drm/tests: hdmi_state_helpers: Switch to new helper")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patch.msgid.link/20251104102258.10026-1-jose.exposito89@gmail.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 fixes for v6.19-rc1:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/281309f78560bcceebac8d5c0511efe66baf641c@intel.com
|
|
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
Reported-by: kitta <kitta@linux.alibaba.com>
Co-developed-by: kitta <kitta@linux.alibaba.com>
Signed-off-by: Evan Li <evan.li@linux.alibaba.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
|
|
lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work
handler lkkbd_reinit() dereferences the lkkbd structure and its
serio/input_dev fields.
lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd
structure without preventing the reinit work from being queued again
until serio_close() returns. This can allow the work handler to run
after the structure has been freed, leading to a potential use-after-free.
Use disable_work_sync() instead of cancel_work_sync() to ensure the
reinit work cannot be re-queued, and call it both in lkkbd_disconnect()
and in lkkbd_connect() error paths after serio_open().
Signed-off-by: Minseong Kim <ii4gsp@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212052314.16139-1-ii4gsp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There's a lot of unnecessary whitespace damage in this
file: space before tabs, etc., that has no formatting
or readability effect or advantages.
Fix them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/176535283007.498.16442167388418039352.tip-bot2@tip-bot2
|
|
Add kernel documentation for Multi Queue group GuC interface.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-36-niranjana.vishwanathapura@intel.com
|
|
Add kernel documentation for Multi Queue group and update
the corresponding rst.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-35-niranjana.vishwanathapura@intel.com
|
|
Add support to keep the group active after the primary queue is
destroyed. Instead of killing the primary queue during exec_queue
destroy ioctl, kill it when all the secondary queues of the group
are killed.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-34-niranjana.vishwanathapura@intel.com
|
|
Add xe_exec_queue_create_multi_queue event with
multi-queue information.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-33-niranjana.vishwanathapura@intel.com
|
|
Upon a job timeout, teardown the multi-queue group by
triggering TDR on all queues of the multi-queue group
and by skipping timeout checks in them.
v5: Ban the group while triggering TDR for the guc
reported errors
Add FIXME in TDR to take multi-queue group off HW
(Matt Brost)
v6: Trigger cleanup of group only for multi-queue case
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-32-niranjana.vishwanathapura@intel.com
|
|
If GuC doesn't response to CGP_SYNC message, trigger
GT reset and cleanup of all the queues of the multi
queue group.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-31-niranjana.vishwanathapura@intel.com
|
|
Trigger multi-queue context cleanup upon CGP context error
notification from GuC.
v4: Fix error message
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-30-niranjana.vishwanathapura@intel.com
|
|
To properly support soft light restore between batches
being arbitrated at the CFEG, PIPE_CONTROL instructions
have a new bit in the first DW, QUEUE_DRAIN_MODE. When
set, this indicates to the CFEG that it should only
drain the current queue.
Additionally we no longer want to set the CS_STALL bit
for these multi queue queues as this causes the entire
pipeline to stall waiting for completion of the prior
batch, preventing this soft light restore from occurring
between queues in a queue group.
v4: Assert !multi_queue where applicable (Matt Roper)
Bspec: 56551
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-29-niranjana.vishwanathapura@intel.com
|
|
As all queues of a multi queue group use the primary queue of the group
to interface with GuC. Hence there is a dependency between the queues of
the group. So, when primary queue of a multi queue group is cleaned up,
also trigger a cleanup of the secondary queues also. During cleanup, stop
and re-start submission for all queues of a multi queue group to avoid
any submission happening in parallel when a queue is being cleaned up.
v2: Initialize group->list_lock, add fs_reclaim dependency, remove
unwanted secondary queues cleanup (Matt Brost)
v3: Properly handle cleanup of multi-queue group (Matt Brost)
v4: Fix IS_ENABLED(CONFIG_LOCKDEP) check (Matt Brost)
Revert stopping/restarting of submissions on queues of the
group in TDR as it is not needed.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-28-niranjana.vishwanathapura@intel.com
|
|
Dump multi queue specific information in the guc exec queue
dump.
v2: Move multi queue related fields inside the multi_queue
sub-structure (Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-27-niranjana.vishwanathapura@intel.com
|
|
Support dynamic priority change for multi queue group queues via
exec queue set_property ioctl. Issue CGP_SYNC command to GuC through
the drm scheduler message interface for priority to take effect.
v2: Move is_multi_queue check to exec_queue layer and assert
is_multi_queue being set in guc submission layer (Matt Brost)
v3: Assert CGP_SYNC message length is valid (Matt Brost)
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-26-niranjana.vishwanathapura@intel.com
|
|
This patch adds support for exec_queue set_property ioctl.
It is derived from the original work which is part of
https://patchwork.freedesktop.org/series/112188/
Currently only DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY
property can be dynamically set.
v2: Check for and update kernel-doc which property this ioctl
supports (Matt Brost)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-25-niranjana.vishwanathapura@intel.com
|
|
Only MULTI_QUEUE_PRIORITY property is valid for secondary queues of a
multi queue group. MULTI_QUEUE_PRIORITY only applies to multi queue group
queues. Detect invalid user queue property setting and return error.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-24-niranjana.vishwanathapura@intel.com
|
|
Add support for queues of a multi queue group to set
their priority within the queue group by adding property
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY.
This is the only other property supported by secondary
queues of a multi queue group, other than
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE.
v2: Add kernel doc for enum xe_multi_queue_priority,
Add assert for priority values, fix includes and
declarations (Matt Brost)
v3: update uapi kernel-doc (Matt Brost)
v4: uapi change due to rebase
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-23-niranjana.vishwanathapura@intel.com
|
|
Implement GuC commands and response along with the Context
Group Page (CGP) interface for multi queue support.
Ensure that only primary queue (q0) of a multi queue group
communicate with GuC. The secondary queues of the group only
need to maintain LRCA and interface with drm scheduler.
Use primary queue's submit_wq for all secondary queues of a multi
queue group. This serialization avoids any locking around CGP
synchronization with GuC.
v2: Fix G2H_LEN_DW_MULTI_QUEUE_CONTEXT value, add more comments
(Matt Brost)
v3: Minor code refactro, use xe_gt_assert
v4: Use xe_guc_ct_wake_waiters(), remove vf recovery support
(Matt Brost)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-22-niranjana.vishwanathapura@intel.com
|
|
Multi Queue is a new mode of execution supported by the compute and
blitter copy command streamers (CCS and BCS, respectively). It is an
enhancement of the existing hardware architecture and leverages the
same submission model. It enables support for efficient, parallel
execution of multiple queues within a single context. All the queues
of a group must use the same address space (VM).
The new DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE execution queue
property supports creating a multi queue group and adding queues to
a queue group. All queues of a multi queue group share the same
context.
A exec queue create ioctl call with above property specified with value
DRM_XE_SUPER_GROUP_CREATE will create a new multi queue group with the
queue being created as the primary queue (aka q0) of the group. To add
secondary queues to the group, they need to be created with the above
property with id of the primary queue as the value. The properties of
the primary queue (like priority, timeslice) applies to the whole group.
So, these properties can't be set for secondary queues of a group.
Once destroyed, the secondary queues of a multi queue group can't be
replaced. However, they can be dynamically added to the group up to a
total of 64 queues per group. Once the primary queue is destroyed,
secondary queues can't be added to the queue group.
v2: Remove group->lock, fix xe_exec_queue_group_add()/delete()
function semantics, add additional comments, remove unused
group->list_lock, add XE_BO_FLAG_GGTT_INVALIDATE for cgp bo,
Assert LRC is valid, update uapi kernel doc.
(Matt Brost)
v3: Use XE_BO_FLAG_PINNED_LATE_RESTORE/USER_VRAM/GGTT_INVALIDATE
flags for cgp bo (Matt)
v4: Ensure queue is not a vm_bind queue
uapi change due to rebase
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-21-niranjana.vishwanathapura@intel.com
|
|
Add multi_queue_enable_mask field to the gt information structure
which is bitmask of all engine classes with multi queue support
enabled.
v2: Rename multi_queue_enable_mask to multi_queue_engine_class_mask
(Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-20-niranjana.vishwanathapura@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.19-2025-12-11:
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20251211195600.1641924-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v6.19-rc1:
- Fix uaf in panthor.
- Revert 8 byte alignment constraint for pitch in dumb bo's.
- Fix DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC handling renasas.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/a82c2a2a-314f-403b-85bf-9b3ee09b903c@linux.intel.com
|
|
The drm_property_create_enum() function returns NULL on error, it never
returns error pointers. Fix the error checking to match.
Fixes: 2afc3184f3b3 ("drm/plane: Add COLOR PIPELINE property")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/aTK9ZR0sMgqSACow@stanley.mountain
|
|
scx_enable() calls scx_bypass(true) to initialize in bypass mode and then
scx_bypass(false) on success to exit. If scx_enable() fails during task
initialization - e.g. scx_cgroup_init() or scx_init_task() returns an error -
it jumps to err_disable while bypass is still active. scx_disable_workfn()
then calls scx_bypass(true/false) for its own bypass, leaving the bypass depth
at 1 instead of 0. This causes the system to remain permanently in bypass mode
after a failed scx_enable().
Failures after task initialization is complete - e.g. scx_tryset_enable_state()
at the end - already call scx_bypass(false) before reaching the error path and
are not affected. This only affects a subset of failure modes.
Fix it by tracking whether scx_enable() called scx_bypass(true) in a bool and
having scx_disable_workfn() call an extra scx_bypass(false) to clear it. This
is a temporary measure as the bypass depth will be moved into the sched
instance, which will make this tracking unnecessary.
Fixes: 8c2090c504e9 ("sched_ext: Initialize in bypass mode")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/stable/286e6f7787a81239e1ce2989b52391ce%40kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Use the higher level function where crtc is available.
v2: Rebase
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/29a29e746bc90c824d4f2bd15e42817dd7d0b199.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We have the helpers to avoid open coding dev->vblank[pipe] access.
v2: Rebase
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/ad41f25c625d6a263b7e2e1d227cb14c5d0ce204.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In drm_crtc_vblank_helper_get_vblank_timestamp_internal(), we only need
the vblank variable for atomic modesetting. Limit the scope to make
upcoming changes easier.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/b50f0bff654a6902ffd7ae52c31d46fad9ed7540.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let drivers deal with the vblank wait failures if they so desire. If the
current warning backtrace gets toned down to a simple warning message,
the drivers may wish to add the backtrace themselves.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/7f2de4dd170771991756073f037c7ca043c3e746.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that the pipe is crtc->pipe, there's no need to check it's within
range.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/ced963542bfb00c2f1a653e9e5f717fccbd25132.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There's really no need for the extra static function at all.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/fe969aad198d3f151fafd01faca5b0e73bfd9a03.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make drm_wait_on_vblank() static. The function is an internal interface
and not invoked directly by drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/b0ab9833a85f5fb6de95ad6cb0216864bf860c9e.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
