| Age | Commit message (Collapse) | Author |
|---|
|
In order to be able to configure event detection on a per axis
basis (for either setting an event threshold/sensitivity value, or
enabling/disabling event detection), add new axis-specific fields
to struct st_lsm6dsx_event_src, and modify the logic that handles
event configuration to properly handle axis-specific settings when
supported by a given event source.
A future commit will add actual event sources with per-axis
configurability.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In preparation for adding support for more event types, use an array
indexed by event ID instead of a scalar value to store enabled events, and
refactor the functions to configure and report events so that their
implementation is not specific for wakeup events. Move the logic to update
the global event interrupt enable flag from st_lsm6dsx_event_setup() to its
calling function, so that it can take into account also event sources
different from the source being configured. While changing the signature of
the st_lsm6dsx_event_setup() function, opportunistically add the currently
unused `axis` parameter, which will be used when adding support for
enabling and disabling events on a per axis basis.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This field is used to store the wakeup event detection threshold value.
When adding support for more event types, some of which may have different
threshold values for different axes, storing all threshold values for all
event sources would be cumbersome. Thus, remove this field altogether, and
read the currently configured value from the sensor when requested by
userspace.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The enable_event field in struct st_lsm6dsx_hw does not lend itself well to
handling multiple event sources, so it will have to be modified to add
support for more event sources. As a preparatory step, remove references to
this field from code that does not deal with event management; rework the
st_lsm6dsx_check_events() function so that it returns whether any events
are currently enabled on a given sensor.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The mask value being assigned to the irq1_func and irq2_func fields of the
irq_config struct is specific to a single event source (i.e. the wakeup
event), and as such it should be separate from the definition of the
interrupt function registers, which cover multiple event sources.
In preparation for adding support for more event types, change the
irq1_func and irq2_func type from an {address, mask} pair to an address,
and move the mask value to a new field of struct st_lsm6dsx_event_src. No
functional changes.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The st_lsm6dsx_event_settings structure contains fields specific for one
event type (wakeup). In preparation for adding support for more event
types, introduce an event id enum and a generic event source structure, and
replace wakeup-specific data in struct st_lsm6dsx_event_settings with an
array of event source structures.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Support configuring output calibration value. Among the devices
currently supported by this driver, this setting is specific to
ad9434. The offset can be used to calibrate the output against
a known input. The register is called offset, but the procedure
is best mapped internally with calibbias operation.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove legacy platform_data support as there are no in tree users and
this approach belongs to a long gone era. The policy decision on what
to output is a userspace problem, not something that should be provided
from firmware.
The driver now initializes the device to a safe state (SLEEP|RESET|CLR)
outputting nothing. Userspace can configure the desired frequencies and
phases via the existing sysfs attributes once the device is ready to be
used.
Original discussion started here [1].
Link: https://lore.kernel.org/linux-iio/20250628161040.3d21e2c4@jic23-huawei/ #[1]
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Tomas Borquez <tomasborquez13@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
On kernels build with CONFIG_PROVE_LOCKING, CONFIG_MODULES
and CONFIG_DEBUG_LOCK_ALLOC 'rmmod rdma_rxe' is no longer
possible.
For the global recv sockets rxe_net_exit() is where we
call rxe_release_udp_tunnel-> udp_tunnel_sock_release(),
which means the sockets are destroyed before 'rmmod rdma_rxe'
finishes, so there's no need to protect against
rxe_recv_slock_key and rxe_recv_sk_key disappearing
while the sockets are still alive.
Fixes: 80a85a771deb ("RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep")
Cc: Zhu Yanjun <zyjzyj2000@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://patch.msgid.link/20251219140408.2300163-1-metze@samba.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The GENE_TWL7 project is an AAEON platform with a fixed audio
configuration consisting of line-out, line-in, and mic-in.
The audio routing and pin assignments are defined according to
the board-level hardware design and are not intended to be
dynamically changed.
Signed-off-by: Leo Tsai <antivirus621@gmail.com>
Link: https://patch.msgid.link/20251218055136.3875-1-antivirus621@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The PCI subsystem ID of the HP machine Abe A6U should be 0x8ee7
instead of 0x8eb7.
Fixes: a30fa8122222 ("ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20251218062251.2039592-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.
|
|
RCFW_COMM_CONS_PCI_BAR_REGION is defined as BAR 2, so checking
!creq_db->reg.bar_id is incorrect and always false.
pci_resource_start() returns the BAR base address, and a value of 0
indicates that the BAR is unassigned. Update the condition to test
bar_base == 0 instead.
This ensures the driver detects and logs an error for an unassigned
RCFW communication BAR.
Fixes: cee0c7bba486 ("RDMA/bnxt_re: Refactor command queue management code")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251217100158.752504-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix missing comparison operator for RDMA_NETWORK_ROCE_V1 in the
conditional statement. The constant was used directly instead of
being compared with net_type, causing the condition to always
evaluate to true.
Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Signed-off-by: Jang Ingyu <ingyujang25@korea.ac.kr>
Link: https://patch.msgid.link/20251219041508.1725947-1-ingyujang25@korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Disable link power management (LPM) for a Seagate drive that is
misbehaving when LPM is enabled
* tag 'ata-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Disable LPM on ST2000DM008-2FR102
|
|
RZ/G3E SoC is embedded with Mali-G52 GPU system. The system hangs after
STR in the following condition:
STR -> Wakeup from STR -> Unload panfrost using 'modprobe -r panfrost'.
Fix this issue by asserting/deasserting the reset during suspend/resume.
Rename the variable allwinner_h616_data->default_pm_rt_data for data
reuse and make it as generic GPU PM runtime data.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251203125104.67596-1-biju.das.jz@bp.renesas.com
Signed-off-by: Adrian Larumbe <adrianml@alumnos.upm.es>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes for various SPI drivers, plus a relaxation
of constraints in the DT for the DesignWare controller to reflect
hardware that's been seen.
There's several fixes for the Cadence QuadSPI driver since a fix
during the last release made some existing issues with error handling
during probe more readily visible"
* tag 'spi-fix-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mt65xx: Use IRQF_ONESHOT with threaded IRQ
spi: dt-bindings: snps,dw-abp-ssi: Allow up to 16 chip-selects
spi: cadence-quadspi: Fix clock disable on probe failure path
spi: cadence-quadspi: Add error logging for DMA request failure
spi: fsl-cpm: Check length parity before switching to 16 bit mode
spi: mpfs: Fix an error handling path in mpfs_spi_probe()
|
|
eMMC board
Append "starfive,jh7110" compatible to VisionFive 2 Lite eMMC board in the
least-compatible end of the list.
Appending "starfive,jh7110" reduces the number of compatible strings to
check in the OpenSBI platform driver. JH-7110S SoC on this board is the
same as JH-7110 SoC however rated for thermal, voltage, and frequency
characteristics for a maximum of 1.25GHz operation.
Link: https://lore.kernel.org/lkml/1f96a267-f5c6-498e-a2c4-7a47a73ea7e7@canonical.com/
Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Append "starfive,jh7110" compatible to VisionFive 2 Lite board in the
least-compatible end of the list.
Appending "starfive,jh7110" reduces the number of compatible strings to
check in the OpenSBI platform driver. JH-7110S SoC on this board is the
same as JH-7110 SoC however rated for thermal, voltage, and frequency
characteristics for a maximum of 1.25GHz operation.
Link: https://lore.kernel.org/lkml/1f96a267-f5c6-498e-a2c4-7a47a73ea7e7@canonical.com/
Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Lite board
Append "starfive,jh7110" compatible to VisionFive 2 Lite and VisionFive 2
Lite eMMC boards in the least-compatible end of the list.
Appending "starfive,jh7110" reduces the number of compatible strings to
check in the OpenSBI platform driver. JH-7110S SoC on these boards is the
same as JH-7110 SoC however rated for thermal, voltage, and frequency
characteristics for a maximum of 1.25GHz operation.
Link: https://lore.kernel.org/lkml/1f96a267-f5c6-498e-a2c4-7a47a73ea7e7@canonical.com/
Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
clang is generating very inefficient code for native_save_fl() which is
used for local_irq_save() in critical spots.
Allowing the "pop %0" to use memory:
1) forces the compiler to add annoying stack canaries when
CONFIG_STACKPROTECTOR_STRONG=y in many places.
2) Almost always is followed by an immediate "move memory,register"
One good example is _raw_spin_lock_irqsave, with 8 extra instructions
ffffffff82067a30 <_raw_spin_lock_irqsave>:
ffffffff82067a30: ...
ffffffff82067a39: 53 push %rbx
// Three instructions to ajust the stack, read the per-cpu canary
// and copy it to 8(%rsp)
ffffffff82067a3a: 48 83 ec 10 sub $0x10,%rsp
ffffffff82067a3e: 65 48 8b 05 da 15 45 02 mov %gs:0x24515da(%rip),%rax # <__stack_chk_guard>
ffffffff82067a46: 48 89 44 24 08 mov %rax,0x8(%rsp)
ffffffff82067a4b: 9c pushf
// instead of pop %rbx, compiler uses 2 instructions.
ffffffff82067a4c: 8f 04 24 pop (%rsp)
ffffffff82067a4f: 48 8b 1c 24 mov (%rsp),%rbx
ffffffff82067a53: fa cli
ffffffff82067a54: b9 01 00 00 00 mov $0x1,%ecx
ffffffff82067a59: 31 c0 xor %eax,%eax
ffffffff82067a5b: f0 0f b1 0f lock cmpxchg %ecx,(%rdi)
ffffffff82067a5f: 75 1d jne ffffffff82067a7e <_raw_spin_lock_irqsave+0x4e>
// three instructions to check the stack canary
ffffffff82067a61: 65 48 8b 05 b7 15 45 02 mov %gs:0x24515b7(%rip),%rax # <__stack_chk_guard>
ffffffff82067a69: 48 3b 44 24 08 cmp 0x8(%rsp),%rax
ffffffff82067a6e: 75 17 jne ffffffff82067a87
...
// One extra instruction to adjust the stack.
ffffffff82067a73: 48 83 c4 10 add $0x10,%rsp
...
// One more instruction in case the stack was mangled.
ffffffff82067a87: e8 a4 35 ff ff call ffffffff8205b030 <__stack_chk_fail>
This patch changes nothing for gcc, but for clang saves ~20000 bytes of text
even though more functions are inlined.
$ size vmlinux.gcc.before vmlinux.gcc.after vmlinux.clang.before vmlinux.clang.after
text data bss dec hex filename
45565821 25005462 4704800 75276083 47c9f33 vmlinux.gcc.before
45565821 25005462 4704800 75276083 47c9f33 vmlinux.gcc.after
45121072 24638617 5533040 75292729 47ce039 vmlinux.clang.before
45093887 24638633 5536808 75269328 47c84d0 vmlinux.clang.after
$ scripts/bloat-o-meter -t vmlinux.clang.before vmlinux.clang.after
add/remove: 1/2 grow/shrink: 21/533 up/down: 2250/-22112 (-19862)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Work around clang problems with "=rm" asm constraint.
clang seems to always chose the memory output, while it is almost
always the worst choice.
Add ASM_OUTPUT_RM so that we can replace "=rm" constraint
where it matters for clang, while not penalizing gcc.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xfs fixes from Carlos Maiolino:
"This contains a few fixes for zoned devices support, an UAF and a
compiler warning, and some cleaning up"
* tag 'xfs-fixes-6.19-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix the zoned RT growfs check for zone alignment
xfs: validate that zoned RT devices are zone aligned
xfs: fix XFS_ERRTAG_FORCE_ZERO_RANGE for zoned file system
xfs: fix a memory leak in xfs_buf_item_init()
xfs: fix stupid compiler warning
xfs: fix a UAF problem in xattr repair
xfs: ignore discard return value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc4282: Fix reset_history file permissions
- ds620: Update broken Datasheet URL in driver documentation
- tmp401: Fix overflow caused by default conversion rate value
- ibmpex: Fix use-after-free in high/low store
- dell-smm: Limit fan multiplier to avoid overflow
* tag 'hwmon-for-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc4282): Fix reset_history file permissions
hwmon: (DS620) Update broken Datasheet URL in driver documentation
hwmon: (tmp401) fix overflow caused by default conversion rate value
hwmon: (ibmpex) fix use-after-free in high/low store
hwmon: (dell-smm) Limit fan multiplier to avoid overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci-esdhc-imx: Fix build problem dependency
- sdhci-of-arasan: Increase card-detect stable timeout to 2 seconds
- sdhci-of-aspeed: Fix DT doc for missing properties
* tag 'mmc-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: add alternate ARCH_S32 dependency to Kconfig
mmc: sdhci-of-arasan: Increase CD stable timeout to 2 seconds
dt-bindings: mmc: sdhci-of-aspeed: Switch ref to sdhci-common.yaml
|
|
Pull drm fixes from Dave Airlie:
"rc2 fixes for the week, mostly xe, with amdgpu as usual. Then a
smattering of small fixes across the core/tests/panel and amdxdna.
I expect things will be quiet for rc3/4 as teams take a break, and I'm
travelling but will keep an eye on things.
core:
- fix gem handle leak on DRM_IOCTL_GEM_CHANGE_HANDLE
tests:
- add EDEADLK handling
amdgpu:
- Fix no_console_suspend handling
- DCN 3.5.x seamless boot fixes
- DP audio fix
- Fix race in GPU recovery
- SMU 14 OD fix
amdkfd:
- Event fix
xe:
- Limit num_syncs to prevent oversized kernel allocations
- Disallow 0 OA property values
- Disallow 0 EU stall property values
- Fix kobject leak
- Workaround
- Loop variable reference fix
- Fix a CONFIG corner-case incorrect number of argument
- Skip reason prefix while emitting array
- VF migration fix
- Fix context in mei interrupt top half
- Don't include the CCS metadata in the dma-buf sg-table
- VF queueing recovery work fix
- Increase TDF timeout
- GT reset registers vs scheduler ordering fix
- Adjust long-running workload timeslices
- Always set OA_OAGLBCTXCTRL_COUNTER_RESUME
- Fix a return value
- Drop preempt-fences when destroying imported dma-bufs
- Use usleep_range for accurate long-running workload timeslicing
amdxdna:
- don't load virtualized
panel:
- fix visionox-rm69299 Kconfig dependency
- sony-td4353-jdi probing fix"
* tag 'drm-fixes-2025-12-20' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/xe: Use usleep_range for accurate long-running workload timeslicing
drm/xe: Drop preempt-fences when destroying imported dma-bufs.
drm/xe/eustall: Disallow 0 EU stall property values
drm/xe/oa: Disallow 0 OA property values
drm/xe/xe_sriov_vfio: Fix return value in xe_sriov_vfio_migration_supported()
drm/xe/oa: Always set OAG_OAGLBCTXCTRL_COUNTER_RESUME
drm/xe: Adjust long-running workload timeslices to reasonable values
drm/xe/oa: Limit num_syncs to prevent oversized allocations
drm/xe: Limit num_syncs to prevent oversized allocations
drm/amdkfd: Fix improper NULL termination of queue restore SMI event string
drm/amd/pm: restore SCLK settings after S0ix resume
drm/amdgpu: fix a job->pasid access race in gpu recovery
drm/amd/display: Fix DP no audio issue
drm/amd/display: Fix scratch registers offsets for DCN351
drm/amd/display: Fix scratch registers offsets for DCN35
drm/amd: Resume the device in thaw() callback when console suspend is disabled
drm/panel: visionox-rm69299: Depend on BACKLIGHT_CLASS_DEVICE
accel/amdxdna: Block running under a hypervisor
drm/panel: sony-td4353-jdi: Enable prepare_prev_first
drm/xe: Restore engine registers before restarting schedulers after GT reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Drop unused parameter from kunit_device_register_internal and make
FAULT_TEST default to n when PANIC_ON_OOPS"
* tag 'linux_kselftest-kunit-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: make FAULT_TEST default to n when PANIC_ON_OOPS
kunit: Drop unused parameter from kunit_device_register_internal
|
|
The "dev->clt_device_id" variable is set using ida_alloc_max() which
returns an int and in particular it returns negative error codes.
Change the type from u32 to int to fix the error checking.
Fixes: c9b5645fd8ca ("block: rnbd-clt: Fix leaked ID in init_dev()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a ublk server process releases a ublk char device file, any requests
dispatched to the ublk server but not yet completed will retain a ref
value of UBLK_REFCOUNT_INIT. Before commit e63d2228ef83 ("ublk: simplify
aborting ublk request"), __ublk_fail_req() would decrement the reference
count before completing the failed request. However, that commit
optimized __ublk_fail_req() to call __ublk_complete_rq() directly
without decrementing the request reference count.
The leaked reference count incorrectly allows user copy and zero copy
operations on the completed ublk request. It also triggers the
WARN_ON_ONCE(refcount_read(&io->ref)) warnings in ublk_queue_reinit()
and ublk_deinit_queue().
Commit c5c5eb24ed61 ("ublk: avoid ublk_io_release() called after ublk
char dev is closed") already fixed the issue for ublk devices using
UBLK_F_SUPPORT_ZERO_COPY or UBLK_F_AUTO_BUF_REG. However, the reference
count leak also affects UBLK_F_USER_COPY, the other reference-counted
data copy mode. Fix the condition in ublk_check_and_reset_active_ref()
to include all reference-counted data copy modes. This ensures that any
ublk requests still owned by the ublk server when it exits have their
reference counts reset to 0.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: e63d2228ef83 ("ublk: simplify aborting ublk request")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix warnings for Mediatek overlays not getting applied
- Fix regression in handling elfcorehdr region
- Fix creating cpufreq device on OPPv1 platforms
- Add GE7800 GPU in Renesas R-Car V3U
- Simplify dma-coherent property in TI display bindings
- Allow "reg" in sprd,sc9860-clk binding
- Update Linus Walleij's email
* tag 'devicetree-fixes-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
arm64: dts: mediatek: Apply mt8395-radxa DT overlay at build time
arm64: dts: mediatek: mt7988: add dtbs with applied overlays for bpi-r4 (pro)
arm64: dts: mediatek: mt7986: add dtbs with applied overlays for bpi-r3
dt-bindings: Updates Linus Walleij's mail address
dt-bindings: gpu: img,powervr-rogue: Document GE7800 GPU in Renesas R-Car V3U
cpufreq: dt-platdev: Fix creating device on OPPv1 platforms
dt-bindings: clock: sprd,sc9860-clk: Allow "reg" for gate clocks
dt-bindings: display/ti: Simplify dma-coherent property
arm64: kdump: Fix elfcorehdr overlap caused by reserved memory processing reorder
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix build error for Alchemy
- Fix reference leak
* tag 'mips-fixes_6.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix a reference leak bug in ip22_check_gio()
MIPS: Alchemy: Remove bogus static/inline specifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Two left-over updates that could not go into -rc1 due to conflicts
with other series:
- Simplify checks in arch_kfence_init_pool() since
force_pte_mapping() already takes BBML2-noabort (break-before-make
Level 2 with no aborts generated) into account
- Remove unneeded SVE/SME fallback preserve/store handling in the
arm64 EFI. With the recent updates, the fallback path is only taken
for EFI runtime calls from hardirq or NMI contexts. In practice,
this only happens under panic/oops/emergency_restart() and no
restoring of the user state expected.
There's a corresponding lkdtm update to trigger a BUG() or panic()
from hardirq context together with a fixup not to confuse
clang/objtool about the control flow
GCS (guarded control stacks) fix: flush the GCS locking state on exec,
otherwise the new task will not be able to enable GCS (locked as
disabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
arm64/gcs: Flush the GCS locking state on exec
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context
arm64: mm: Simplify check in arch_kfence_init_pool()
|
|
Pull x86 kvm fixes from Paolo Bonzini:
"x86 fixes. Everyone else is already in holiday mood apparently.
- Add a missing 'break' to fix param parsing in the rseq selftest
- Apply runtime updates to the _current_ CPUID when userspace is
setting CPUID, e.g. as part of vCPU hotplug, to fix a false
positive and to avoid dropping the pending update
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as
it's not supported by KVM and leads to a use-after-free due to KVM
failing to unbind the memslot from the previously-associated
guest_memfd instance
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for
supporting flags-only changes on KVM_MEM_GUEST_MEMFD memlslots,
e.g. for dirty logging
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is
defined as -1ull (a 64-bit value)
- Update SVI when activating APICv to fix a bug where a
post-activation EOI for an in-service IRQ would effective be lost
due to SVI being stale
- Immediately refresh APICv controls (if necessary) on a nested
VM-Exit instead of deferring the update via KVM_REQ_APICV_UPDATE,
as the request is effectively ignored because KVM thinks the vCPU
already has the correct APICv settings"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Immediately refresh APICv controls as needed on nested VM-Exit
KVM: VMX: Update SVI during runtime APICv activation
KVM: nSVM: Set exit_code_hi to -1 when synthesizing SVM_EXIT_ERR (failed VMRUN)
KVM: nSVM: Clear exit_code_hi in VMCB when synthesizing nested VM-Exits
KVM: Harden and prepare for modifying existing guest_memfd memslots
KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot
KVM: selftests: Add a CPUID testcase for KVM_SET_CPUID2 with runtime updates
KVM: x86: Apply runtime updates to current CPUID during KVM_SET_CPUID{,2}
KVM: selftests: Add missing "break" in rseq_test's param parsing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just a single patch fixing a sparse warning"
* tag 'for-linus-6.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Fix sparse warning in enlighten_pv.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A stable fix for a missing tag reset that can happen in
kfree_nolock() with KASAN+SLUB_TINY configs (Deepanshu Kartikey)
* tag 'slab-for-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: reset KASAN tag in defer_free() before accessing freed memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- iommupt: Fix an oops found by syzcaller in the new generic
IO-page-table code.
- AMD-Vi: Fix IO_PAGE_FAULTs in kdump kernels triggered by re-using
domain-ids from previous kernel.
* tag 'iommu-fixes-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
amd/iommu: Make protection domain ID functions non-static
amd/iommu: Preserve domain ids inside the kdump kernel
iommupt: Return ERR_PTR from _table_alloc()
|
|
The "subblock" clocks and reset registers on PolarFire SoC are located
in the mss-top-sysreg region, alongside pinctrl and interrupt control
functionality. Re-write the devicetree to describe the sys explicitly,
as its own node, rather than as a region of the clock node.
Correspondingly, the phandles to the reset controller must be updated to
the new provider. The drivers will continue to support the old way of
doing things.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
When the binding for the mailbox on PolarFire SoC was originally
written, and later modified, mistakes were made - and the precise
nature of the later modification should have been a giveaway, but alas
I was naive at the time.
A more correct modelling of the hardware is to use two syscons and have
a single reg entry for the mailbox, containing the mailbox region. The
two syscons contain the general control/status registers for the mailbox
and the interrupt related registers respectively. The reason for two
syscons is that the same mailbox is present on the non-SoC version of
the FPGA, which has no interrupt controller, and the shared part of the
rtl was unchanged between devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix this week, for an issue with the calculation of the
number of segments in the ublk kbuf import path"
* tag 'io_uring-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix nr_segs calculation in io_import_kbuf
|
|
Since we recently started warning about uses of this function after the
atomic check phase completes, we've started getting warnings about this in
nouveau. It appears a misplaced drm_atomic_get_crtc_state() call has been
hiding in our .prepare_fb callback for a while.
So, fix this by adding a new nv50_head_atom_get_new() function and use that
in our .prepare_fb callback instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 1590700d94ac ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251211190256.396742-1-lyude@redhat.com
|
|
GEN7_GRAS_NC_MODE_CNTL was only programmed for BR and not for BV pipe
but it needs to be programmed for both.
Program both pipes in hw_init and introducea separate reglist for it in
order to add this register to the dynamic reglist which supports
restoring registers per pipe.
Fixes: 91389b4e3263 ("drm/msm/a6xx: Add a pwrup_list field to a6xx_info")
Cc: stable@vger.kernel.org
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/691553/
Message-ID: <20251201-gras_nc_mode_fix-v3-1-92a8a10d91d0@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Previously this register would become 0 after IFPC took place which
broke all usages of counters.
Fixes: a6a0157cc68e ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Cc: stable@vger.kernel.org
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/690960/
Message-ID: <20251127-ifpc_counters-v3-1-fac0a126bc88@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Move the call to preempt_prepare_postamble() after verifying that
preempt_postamble_ptr is valid. If preempt_postamble_ptr is NULL,
dereferencing it in preempt_prepare_postamble() would lead to a crash.
This change avoids calling the preparation function when the
postamble allocation has failed, preventing potential NULL pointer
dereference and ensuring proper error handling.
Fixes: 50117cad0c50 ("drm/msm/a6xx: Use posamble to reset counters on preemption")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Patchwork: https://patchwork.freedesktop.org/patch/687659/
Message-ID: <20251113082839.3821867-1-alok.a.tiwari@oracle.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist
if still deferenced in a7xx_patch_pwrup_reglist() which causes
a kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : a6xx_hw_init+0x155c/0x1e4c [msm]
lr : a6xx_hw_init+0x9a8/0x1e4c [msm]
...
Call trace:
a6xx_hw_init+0x155c/0x1e4c [msm] (P)
msm_gpu_hw_init+0x58/0x88 [msm]
adreno_load_gpu+0x94/0x1fc [msm]
msm_open+0xe4/0xf4 [msm]
drm_file_alloc+0x1a0/0x2e4 [drm]
drm_client_init+0x7c/0x104 [drm]
drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib]
drm_client_setup+0xb4/0xd8 [drm_client_lib]
msm_drm_kms_post_init+0x2c/0x3c [msm]
msm_drm_init+0x1a4/0x228 [msm]
msm_drm_bind+0x30/0x3c [msm]
...
Check the validity of ifpc_reglist before deferencing the table
to setup the register values.
Fixes: a6a0157cc68e ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688944/
Message-ID: <20251117-topic-sm8x50-fix-a6xx-non-ifpc-v1-1-e4473cbf5903@linaro.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
This commit update balance_scx() in the comments to balance_one().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in
btusb.c file").
In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This
ties the lifetime of all the btusb data to the binding of a driver to
one interface, INTF. In a driver that binds to other interfaces, ISOC
and DIAG, this is an accident waiting to happen.
The issue is revealed in btusb_disconnect(), where calling
usb_driver_release_interface(&btusb_driver, data->intf) will have devm
free the data that is also being used by the other interfaces of the
driver that may not be released yet.
To fix this, revert the use of devm and go back to freeing memory
explicitly.
Fixes: 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MGMT_SETTING_ISO_BROADCASTER and MGMT_SETTING_ISO_RECEIVER flags are
missing from supported_settings although they are in current_settings.
Report them also in supported_settings to be consistent.
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Use drm_draw_can_convert_from_xrgb8888() instead of
drm_draw_color_from_xrgb8888() while checking if a color format is
usable. This avoids a WARN in case the first format is not usable.
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251217-drm_draw_conv_check-v3-3-15b6f8bc1cbc@valla.it
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
|
Use drm_draw_can_convert_from_xrgb8888() instead of
drm_draw_color_from_xrgb8888() while searching for a usable color
format. This avoids a WARN in case the first format is not usable.
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251217-drm_draw_conv_check-v3-2-15b6f8bc1cbc@valla.it
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
