| Age | Commit message (Collapse) | Author |
|---|
|
Add maintainer entry for ASPEED PCIe RC driver.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
[mani: removed PHY entries]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-7-4aeb0f53c4ce@aspeedtech.com
|
|
Introduce PCIe Root Complex driver for ASPEED SoCs. Support RC
initialization, reset, clock, IRQ domain, and MSI domain setup. Implement
platform-specific setup and register configuration for ASPEED. And provide
PCI config space read/write and INTx/MSI interrupt handling.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-6-4aeb0f53c4ce@aspeedtech.com
|
|
According to PCIe specification, add FMT, TYPE and CPL status
definition for TLP header.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-5-4aeb0f53c4ce@aspeedtech.com
|
|
ASPEED AST2600 provides one PCIe RC with 5GT/s and AST2700 provides three
PCIe RC for two 16GT/s and one 5GT/s. All of these RCs have just one Root
Port to connect to PCIe device. And also have Mem, I/O access, legacy
interrupt and MSI.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-2-4aeb0f53c4ce@aspeedtech.com
|
|
The Orangepi 4A has a SPI-NOR flash connected to spi0 on the PC pins.
The HOLD and WP pins are not connected, and are instead pulled up by the
supply rail.
Enable spi0 and add a device node for the SPI-NOR flash.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The A523 family SoCs have four SPI controllers. One of them also
supports DBI mode.
Add device nodes for all of them. Also add pinmux nodes for spi0 on the
PC pins, which is commonly used for SPI-NOR boot flash.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup.
Fixes: 891a96f65ac3 ("phy: qcom-qusb2: Add support for runtime PM")
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20251219085640.114473-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clear the PCS_TX_SWING_FULL field mask before setting the new value
in PHY_CTRL5 register. Without clearing the mask first, the OR operation
could leave previously set bits, resulting in incorrect register
configuration.
Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning")
Suggested-by: Leonid Segal <leonids@variscite.com>
Acked-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20251219160912.561431-1-stefano.r@variscite.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge series from Mateusz Litwin <mateusz.litwin@nokia.com>:
On the Stratix10 platform, indirect reads can become very slow due to lost
interrupts and/or missed `complete()` calls, causing
`wait_for_completion_timeout()` to expire.
Three issues were identified:
1) A race condition exists between the read loop and IRQ `complete()`
call:
An IRQ can call `complete()` after the inner loop ends, but before
`reinit_completion()`, losing the completion event and leading to
`wait_for_completion_timeout()` expire. This function will not return
an error because `bytes_to_read` > 0 (indicating data is already in the
FIFO) and the final `ret` value is overwritten by
`cqspi_wait_for_bit()` return value (indicating request completion),
masking the timeout.
For test purpose, logging was added to print the count of timeouts and
the outer loop count.
$ dd if=/dev/mtd0 of=/dev/null bs=64M count=1
[ 2232.925219] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12472)
[ 2236.200391] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12460)
[ 2239.482836] cadence-qspi ff8d2000.spi: Indirect read error timeout
(5) loop (12450)
This indicates that such an event is rare, but possible.
Tested on the Stratix10 platform.
2) The quirk assumes the indirect read path never leaves the inner loop on
SoCFPGA. This assumption is incorrect when using slow flash. Disabling
IRQs in the inner loop can cause lost interrupts.
3) The `CQSPI_SLOW_SRAM` quirk disables `CQSPI_REG_IRQ_IND_COMP` (indirect
completion) interrupt, relying solely on the `CQSPI_REG_IRQ_WATERMARK`
(FIFO watermark) interrupt. For small transfers sizes, the final data
read might not fill the FIFO sufficiently to trigger the watermark,
preventing completion and leading to wait_for_completion_timeout()
expiration.
Two patches have been prepared to resolve these issues.
- [1/2] spi: cadence-quadspi: Prevent lost complete() call during
indirect read
Moving `reinit_completion()` before the inner loop prevents a race
condition. This might cause a premature IRQ complete() call to occur;
however, in the worst case, this will result in a spurious wakeup and
another wait cycle, which is preferable to waiting for a timeout.
- [2/2] spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is
slow
Re-enabling `CQSPI_REG_IRQ_IND_COMP` interrupt resolves the problem for
small reads and removes the disabling of interrupts, addressing the
issue with lost interrupts. This marginally increases the IRQ count.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without `CQSPI_SLOW_SRAM` quirk: 16 668 850
With `CQSPI_SLOW_SRAM` quirk: 204 176
With `CQSPI_SLOW_SRAM` and this patch: 224 528
Patch 2/2: Delivers a substantial read‑performance improvement for the
Cadence QSPI controller on the Stratix10 platform. Patch 1/2: Applies to
all platforms and should yield a modest performance gain, most noticeable
with large `CQSPI_READ_TIMEOUT_MS` values and workloads dominated by many
small reads.
|
|
There exists a null pointer dereference in simple_xattrs_free() as
part of the __kernfs_new_node() routine. Within __kernfs_new_node(),
err_out4 calls simple_xattr_free(), but kn->iattr may be NULL if
__kernfs_setattr() was never called. As a result, the first argument to
simple_xattrs_free() may be NULL + 0x38, and no NULL check is done
internally, causing an incorrect pointer dereference.
Add a check to ensure kn->iattr is not NULL, meaning __kernfs_setattr()
has been called and kn->iattr is allocated. Note that struct kernfs_node
kn is allocated with kmem_cache_zalloc, so we can assume kn->iattr will
be NULL if not allocated.
An alternative fix could be to not call simple_xattrs_free() at all. As
was previously discussed during the initial patch, simple_xattrs_free()
is not strictly needed and is included to be consistent with
kernfs_free_rcu(), which also helps the function maintain correctness if
changes are made in __kernfs_new_node().
Reported-by: syzbot+6aaf7f48ae034ab0ea97@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6aaf7f48ae034ab0ea97
Fixes: 382b1e8f30f7 ("kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node")
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Link: https://patch.msgid.link/20251217060107.4171558-1-whrosenb@asu.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the XE driver through Yocto throws this QA warning:
WARNING: mc:house:linux-stable-6.17-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-stable/6.17/drivers/gpu/drm/xe/generated/xe_device_wa_oob.h in package linux-stable-src contains reference to TMPDIR [buildpaths]
WARNING: mc:house:linux-stable-6.17-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-stable/6.17/drivers/gpu/drm/xe/generated/xe_wa_oob.h in package linux-stable-src contains reference to TMPDIR [buildpaths]
...because the comment at the top of the generated header contains the
absolute path to the rules file at build time:
* This file was generated from rules: /home/calvinow/git/meta-house/build/tmp-house/work-shared/nuc14rvhu7/kernel-source/drivers/gpu/drm/xe/xe_device_wa_oob.rules
Fix this minor annoyance by putting the basename of the rules file in
the generated comment instead of the absolute path, so the generated
header contents no longer depend on the location of the kernel source.
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Link: https://patch.msgid.link/20251222165441.516102-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 5488bec96bcc ("drm/xe/uapi: Use hint for guc to set GT frequency")
introduced low latency hint for use by user space when creating an exec
queue. This instructs SLPC to ramp the GT frequency aggressively.
SVM relies on an internal exec queue to migrate memory upon page faults.
This change creates this exec queue with the low latency hint to speed up
migration.
This should not impact systems where GT frequency is set over sysfs, or
with long running workloads which give enough time for the frequency to
ramp up. An example of memory access pattern that shows an improvement of
SVM performance is running hundreds of times IGT eu-fault-2m-once-device
in xe_exec_system_allocator. The copy duration provided by GT stats in
svm_2M_device_copy_us shows per GPU page fault:
~ 165 μs without low latency hint
~ 130 μs with low latency hint
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251223115327.49555-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
message out fields"
This reverts commit 3e082978c33151d576694deac8abde021ea669a8.
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
CPU: 0 UID: 0 PID: 813 Comm: kworker/0:3 Not tainted 6.19.0-rc2 #26 PREEMPT
Hardware name: LENOVO 21BYZ9SRUS/21BYZ9SRUS, BIOS N3HET87W (1.59 ) 12/05/2023
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call trace:
ucsi_sync_control_common+0xe4/0x1ec [typec_ucsi] (P)
ucsi_run_command+0xcc/0x194 [typec_ucsi]
ucsi_send_command_common+0x84/0x2a0 [typec_ucsi]
ucsi_get_connector_status+0x48/0x78 [typec_ucsi]
ucsi_handle_connector_change+0x5c/0x4f4 [typec_ucsi]
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c331 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
|
|
This reverts commit db0028637cc832add6d87564fcc2ebb12781b046.
The new buffer management code that this feature relies on is broken so
revert for now.
As for the in buffer, nothing prevents the out message size and buffer
from being modified while the message is being processed due to lack of
serialisation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-4-johan@kernel.org
|
|
This reverts commit 775fae520e6ae62c393a8daf42dc534f09692f3f.
The new buffer management code that this relies on is broken so revert
for now.
It also looks like the error handling needs some more thought as the
message out size is not reset on errors.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-3-johan@kernel.org
|
|
This reverts commit 1b474ee01fbb73b1365adbf9b3067f7375e471ee.
The new buffer management code that this feature relies on is broken so
revert for now.
The interface for writing data and support for UCSI_SET_PDOS looks like
it could use some more thought as well.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-2-johan@kernel.org
|
|
ucsi_sync_control_common"
This reverts commit 14ad4c10d5bdd413ff9a914260e89b5f54b7a2c7.
The originally offending commit will be reverted instead of this fix up
at this point in time, so revert this fix.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Fixes: 14ad4c10d5bd ("usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common")
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 5106dbab44fba8ec6dede3f4e75d17f5aa777ec8.
There are reported issues in this file, so revert the commit for now so
that the original offending changes can be reverted and working systems
can be restored. This can come back at a later time if it is rebased
yet-again (sorry.)
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Fixes: 5106dbab44fb ("usb: typec: ucsi: Get connector status after enable notifications")
Cc: Kenneth R. Crudup <kenny@panix.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the reference taken when looking up the PHY I2C device
during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver")
Cc: stable@vger.kernel.org # 3.5
Reported-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Originally, the notification for connector change will be enabled after
the first read of the connector status. Therefore, if the event happens
during this window, it will be missing and make the status unsynced.
Get the connector status only after enabling the notification for
connector change to ensure the status is synced.
Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: stable <stable@kernel.org>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20251218-ucsi-v7-1-aea83e83fb12@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We cannot determine which models require the NO_ATA_1X and
IGNORE_RESIDUE quirks aside from the EL-R12 optical drive device.
Fixes: 955a48a5353f ("usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.")
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Link: https://patch.msgid.link/20251218012318.15978-1-chenchangcheng@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the DWC3 USB controller found on Google Tensor G5
(codename: laguna). The controller features dual-role functionality
and hibernation.
The primary focus is implementing hibernation support in host mode,
enabling the controller to enter a low-power state (D3). This is
particularly relevant during system power state transition and
runtime power management for power efficiency.
Highlights:
- Align suspend callback with dwc3_suspend_common() for deciding
between a full teardown and hibernation in host mode.
- Integration with `psw` (power switchable) and `top` power domains,
managing their states and device links to support hibernation.
- A notifier callback dwc3_google_usb_psw_pd_notifier() for
`psw` power domain events to manage controller state
transitions to/from D3.
- Coordination of the `non_sticky` reset during power state
transitions, asserting it on D3 entry and deasserting on D0 entry
in hibernation scenario.
- Handling of high-speed and super-speed PME interrupts
that are generated by remote wakeup during hibernation.
Co-developed-by: Joy Chakraborty <joychakr@google.com>
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Co-developed-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Naveen Kumar <mnkumar@google.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251218-controller-v10-2-4047c9077274@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the device tree bindings for the DWC3 USB controller found in
Google Tensor SoCs, starting with the G5 generation (codename: laguna).
The Tensor G5 silicon represents a complete architectural departure from
previous generations (like gs101), including entirely new clock/reset
schemes, top-level wrapper and register interface. Consequently,
existing Samsung/Exynos DWC3 USB bindings are incompatible, necessitating
this new device tree binding.
The USB controller on Tensor G5 is based on Synopsys DWC3 IP and features
Dual-Role Device single port with hibernation support.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://patch.msgid.link/20251218-controller-v10-1-4047c9077274@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
configfs_group_operations
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
65061 20968 256 86285 1510d drivers/usb/gadget/configfs.o
After:
=====
text data bss dec hex filename
66181 19848 256 86285 1510d drivers/usb/gadget/configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/49cec1cb84425f854de80b6d69b53a5a3cda8189.1766164523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When smc91x.c is built with PREEMPT_RT, the following splat occurs
in FVP_RevC:
[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106]
[ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work
[ 13.062266] C
** replaying previous printk message **
[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}
[ 13.062353] Hardware name: , BIOS
[ 13.062382] Workqueue: mld mld_ifc_work
[ 13.062469] Call trace:
[ 13.062494] show_stack+0x24/0x40 (C)
[ 13.062602] __dump_stack+0x28/0x48
[ 13.062710] dump_stack_lvl+0x7c/0xb0
[ 13.062818] dump_stack+0x18/0x34
[ 13.062926] process_scheduled_works+0x294/0x450
[ 13.063043] worker_thread+0x260/0x3d8
[ 13.063124] kthread+0x1c4/0x228
[ 13.063235] ret_from_fork+0x10/0x20
This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,
but smc_special_unlock() does not restore IRQs on PREEMPT_RT.
The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),
and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke
rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.
To address this issue, replace smc_special_trylock() with spin_trylock_irqsave().
Fixes: 342a93247e08 ("locking/spinlock: Provide RT variant header: <linux/spinlock_rt.h>")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251217085115.1730036-1-yeoreum.yun@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In bnxt_qplib_alloc_init_hwq(), while allocating memory for PDE table
driver incorrectly is using the "pg_size" value passed to the function.
Fixed to use the right value 4K. Also, fixed the allocation size for
PBL table.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20251223131855.145955-1-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
allmodconfig failes to build with GCC 16 with the following build error
sound/soc/intel/avs/path.c:137:38: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
137 | return id->id == id2->id && !strcmp(id->tplg_name, id2->tplg_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
‘avs_condpaths_walk’: events 1-3
137 | return id->id == id2->id && !strcmp(id->tplg_name, id2->tplg_name);
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (3) warning happens here
| (1) when the condition is evaluated to true
......
155 | if (id->id != path->template->owner->id ||
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| (2) when the condition is evaluated to false
156 | strcmp(id->tplg_name, path->template->owner->owner->name))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/intel/avs/path.h:14,
from sound/soc/intel/avs/path.c:15:
sound/soc/intel/avs/topology.h: In function ‘avs_condpaths_walk’:
sound/soc/intel/avs/topology.h:152:13: note: at offset 4 into source object ‘id’ of size 4
152 | u32 id;
| ^~
Using the sysfs_streq as an alternative to strcmp helps getting around
this build failure.
Please also refer
https://docs.kernel.org/core-api/kernel-api.html#c.__sysfs_match_string
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Link: https://patch.msgid.link/20251221185531.6453-1-listout@listout.xyz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is better to check directly whether or not CONFIG_PM has
been enabled instead of relying on an error value returned by
pm_runtime_put() in that case because pm_runtime_put() may also return
an error value in other cases, like after writing "on" to the devices'
runtime PM "control" attribute in sysfs for one example.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5160923.0VBMTVartN@rafael.j.wysocki
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
i.MX95 PCIes have two reference clock inputs: one from internal PLL, the
other from off chip crystal oscillator. The "extref" clock refers to a
reference clock from an external crystal oscillator.
Add external reference clock input mode support for i.MX95 PCIes.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251211064821.2707001-4-hongxing.zhu@nxp.com
|
|
i.MX95 PCIes have two reference clock inputs: one from internal PLL.
It's wired inside chip and present as "ref" clock. It's not an optional
clock. The other from off chip crystal oscillator. The "extref" clock
refers to a reference clock from an external crystal oscillator through
the CLKIN_N/P pair PADs. It is an optional clock, relied on the board
design.
Add additional optional external reference clock input for i.MX95 PCIes.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251211064821.2707001-3-hongxing.zhu@nxp.com
|
|
Add external reference clock input "extref" for a reference clock that
comes from external crystal oscillator.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251211064821.2707001-2-hongxing.zhu@nxp.com
|
|
In xilinx_pcie_init_irq_domain(), if xilinx_allocate_msi_domains() fails
after pcie->leg_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without cleaning
up the allocated IRQ domain, resulting in a resource leak. In
xilinx_free_msi_domains(), pcie->leg_domain is also neglected.
Add irq_domain_remove() call in the error path to properly release the
IRQ domain before returning the error. Also rename
xilinx_free_msi_domains() to xilinx_free_irq_domains() and add the release
of pcie->leg_domain to it.
Fixes: 313b64c3ae52 ("PCI: xilinx: Convert to MSI domains")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251219021615.965-1-vulab@iscas.ac.cn
|
|
qcs8300
The gcc_aux_clk is not required by the PCIe PHY on qcs8300 and is not
specified in the device tree node. Hence, move the qcs8300 phy
compatibility entry into the list of PHYs that require six clocks.
Removed the phy_aux clock from the PCIe PHY binding as it is no longer
used by any instance.
Fixes: e46e59b77a9e ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2")
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20251128104928.4070050-2-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, the PHY only registers the typec orientation switch when it
is built in. If the typec driver is built as a module, the switch
registration is skipped due to the preprocessor condition, causing
orientation detection to fail.
With commit
45fe729be9a6 ("usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n")
the preprocessor condition is not needed anymore and the orientation
switch is correctly registered for both built-in and module builds.
Fixes: b58f0f86fd61 ("phy: fsl-imx8mq-usb: add tca function driver for imx95")
Cc: stable@vger.kernel.org
Suggested-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20251126140136.1202241-1-fra.schnyder@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When kobject_init_and_add() fails in pmt_features_discovery(), the
function returns without calling kobject_put(). This violates the
kobject API contract where kobject_put() must be called even on
initialization failure to properly release allocated resources.
Fixes: d9a078809356 ("platform/x86/intel/pmt: Add PMT Discovery driver")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251223084041.3832933-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: report BIS capability flags in supported settings
- btusb: revert use of devm_kzalloc in btusb
* tag 'for-net-2025-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: revert use of devm_kzalloc in btusb
Bluetooth: MGMT: report BIS capability flags in supported settings
====================
Link: https://patch.msgid.link/20251219223118.90141-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The LIBWX library code is what calls into phylink, so any user of
it has to select CONFIG_PHYLINK at the moment, with NGBEVF missing this:
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset':
wx_ethtool.c:(.text+0x613): undefined reference to `phylink_ethtool_nway_reset'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_get_link_ksettings':
wx_ethtool.c:(.text+0x62b): undefined reference to `phylink_ethtool_ksettings_get'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_set_link_ksettings':
wx_ethtool.c:(.text+0x643): undefined reference to `phylink_ethtool_ksettings_set'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_get_pauseparam':
wx_ethtool.c:(.text+0x65b): undefined reference to `phylink_ethtool_get_pauseparam'
x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_set_pauseparam':
wx_ethtool.c:(.text+0x677): undefined reference to `phylink_ethtool_set_pauseparam'
Add the 'select PHYLINK' line in the libwx option directly so this will
always be enabled for all current and future wangxun drivers, and remove
the now duplicate lines.
Fixes: a0008a3658a3 ("net: wangxun: add ngbevf build")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251216213547.115026-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3',
the strcpy() in rtattr_add_strsz() is replaced with a checked
version which causes the test to consistently fail when compiled
with toolchains for which this option is enabled by default.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN tap.test_packet_valid_udp_gso ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_gso: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_gso
not ok 1 tap.test_packet_valid_udp_gso
# RUN tap.test_packet_valid_udp_csum ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_csum: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_csum
not ok 2 tap.test_packet_valid_udp_csum
# RUN tap.test_packet_crash_tap_invalid_eth_proto ...
*** buffer overflow detected ***: terminated
# test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion
# FAIL tap.test_packet_crash_tap_invalid_eth_proto
not ok 3 tap.test_packet_crash_tap_invalid_eth_proto
# FAILED: 0 / 3 tests passed.
# Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0
A buffer overflow is detected by the fortified glibc __strcpy_chk()
since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly
reported as 1, even though there is ample space in its bounding
buffer `req`.
Additionally, given that IFLA_IFNAME also expects a null-terminated
string, callers of rtaddr_add_str{,sz}() could simply use the
rtaddr_add_strsz() variant. (which has been renamed to remove the
trailing `sz`) memset() has been used for this function since it
is unchecked and thus circumvents the issue discussed in the
previous paragraph.
Fixes: 2e64fe4624d1 ("selftests: add few test cases for tap driver")
Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dw_pcie_ep_raise_msi_irq() currently programs an outbound iATU window
for the MSI target address on every interrupt and tears it down again
via dw_pcie_ep_unmap_addr().
On systems that heavily use the AXI bridge interface (for example when
the integrated eDMA engine is active), this means the outbound iATU
registers are updated while traffic is in flight. The DesignWare
endpoint databook 5.40a - "3.10.6.1 iATU Outbound Programming Overview"
warns that updating iATU registers in this situation is not supported,
and the behavior is undefined.
Under high MSI and eDMA load this pattern results in occasional bogus
outbound transactions and IOMMU faults, on the RC side, such as:
ipmmu-vmsa eed40000.iommu: Unhandled fault: status 0x00001502 iova 0xfe000000
followed by the system becoming unresponsive. This is the actual output
observed on Renesas R-Car S4, with its ipmmu_hc used with PCIe ch0.
There is no need to reprogram the iATU region used for MSI on every
interrupt. The host-provided MSI address is stable while MSI is enabled,
and the endpoint driver already dedicates a scratch buffer for MSI
generation.
Cache the aligned MSI address and map size, program the outbound iATU
once, and keep the window enabled. Subsequent interrupts only perform a
write to the MSI scratch buffer, avoiding dynamic iATU reprogramming in
the hot path and fixing the lockups seen under load.
dw_pcie_ep_raise_msix_irq() is not modified, as each vector can have a
different msg_addr, and because the msg_addr is allowed to be changed
while the vector is masked. Neither problem is easy to solve with the
current design. Instead, the plan is for the DWC vendor drivers to
transition to dw_pcie_ep_raise_msix_irq_doorbell(), which does not rely
on the iATU.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
[cassel: improve commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251222110144.3299523-2-cassel@kernel.org
|
|
- Update ADMA device tree bindings for tegra264 to support up to 64
interrupt channels by setting 'interrupts' property maxItems to 64.
- Also, update the 'allOf' conditional schema to ensure correct maxItems
for 'interrupts' based on compatible string, including tegra210 (22)
and tegra186 (32) ADMA controllers.
Signed-off-by: sheetal <sheetal@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250929105930.1767294-2-sheetal@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Simplify axi_dmac_parse_dt() by using the cleanup device_node class for
automatically releasing the of_node reference when going out of scope.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 398035178503bf662281bbffb4bebce1460a4bc5
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-4-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In some supported platforms as ARCH_ZYNQMP, part of the memory is mapped
above 32bit addresses and since the DMA mask, by default, is set to 32bits,
we would need to rely on swiotlb (which incurs a performance penalty)
for the DMA mappings. Thus, we can write either the SRC or DEST high
addresses with 1's and read them back. The last bit set on the return
value will reflect the IP address bus width and so we can update the
device DMA mask accordingly.
While at it, support bigger that 32 bits transfers in IP without HW
scatter gather support.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 398035178503bf662281bbffb4bebce1460a4bc5
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-3-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For HW scatter gather transfers we still need to look for the queue. The
HW is capable of queueing 3 concurrent transfers and if we try more than
that we'll get the submit queue full and should return. Otherwise, if we
go ahead and program the new transfer, we end up discarding it.
Fixes: e97dc7435972 ("dmaengine: axi-dmac: Add support for scatter-gather transfers")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 398035178503bf662281bbffb4bebce1460a4bc5
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-2-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If 'hw_cyclic' is false we should still be able to do cyclic transfers in
"software". That was not working for the case where 'desc->num_sgs' is 1
because 'chan->next_desc' is never set with the current desc which means
that the cyclic transfer only runs once and in the next SOT interrupt we
do nothing since vchan_next_desc() will return NULL.
Fix it by setting 'chan->next_desc' as soon as we get a new desc via
vchan_next_desc().
Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 398035178503bf662281bbffb4bebce1460a4bc5
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-1-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In async_set_registers(), when usb_submit_urb() fails, the allocated
async_req structure and URB are not freed, causing a memory leak.
The completion callback async_set_reg_cb() is responsible for freeing
these allocations, but it is only called after the URB is successfully
submitted and completes (successfully or with error). If submission
fails, the callback never runs and the memory is leaked.
Fix this by freeing both the URB and the request structure in the error
path when usb_submit_urb() fails.
Reported-by: syzbot+8dd915c7cb0490fc8c52@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8dd915c7cb0490fc8c52
Fixes: 4d12997a9bb3 ("drivers: net: usb: rtl8150: concurrent URB bugfix")
Signed-off-by: Deepakkumar Karn <dkarn@redhat.com>
Link: https://patch.msgid.link/20251216151304.59865-2-dkarn@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
