| Age | Commit message (Collapse) | Author |
|---|
|
As per datasheet of the HDMI protection IC the CEC_IC pin has been
configured as open-drain.
Fixes: 418d1d840e42 ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Ethernet PHY interrupt mode is level triggered. Adjust the mode
accordingly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace personal mail address by mailing list.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the hdmi_pai device on the Toradex SMARC iMX8M Plus Development
boards.
The hdmi_pai device, together with aud2htx module, hdmi_pai and hdmi
controller compose the HDMI audio pipeline.
See commit b21f87b8322f ("arm64: dts: imx8mp-evk: enable hdmi_pai
device") for the equivalent change on the NXP i.MX8MP EVK board.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the hdmi_pai device on the various iMX8M Plus Verdin boards that
feature the related HDMI interface.
The hdmi_pai device, together with aud2htx module, hdmi_pai and hdmi
controller compose the HDMI audio pipeline.
See commit b21f87b8322f ("arm64: dts: imx8mp-evk: enable hdmi_pai
device") for the equivalent change on the NXP i.MX8MP EVK board.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove obsolete TODO comments, I2S interface is supported since Linux v6.6.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add alias for the apalis first ethernet interface, this ensures
consistent interface naming (e.g. `end0`) and this is used by the
firmware to correctly set the MAC address.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the LPSPI6 controller so it can be used by user applications
through the board’s expansion connector.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Symphony carrier board includes a USB Type-C connector on the USB1
port through an NXP PTN5150 Type-C controller connected on the I2C bus.
The PTN5150 provides cable orientation detection and role switching
information to the USB controller.
This patch adds the PTN5150 node, its interrupt line, the required pin
muxing, and wires the controller to the USB1 OTG dual-role device using
the USB role-switch framework.
This patch adds also USB2 support, that remains in host-only mode,
matching the hardware capabilities of the Symphony board.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Symphony carrier board exposes a capacitive touch interface through an
FFC/FPC connector. This interface is wired to an FT5x06 touch controller
on the I2C bus when using Variscite’s 7-inch capacitive touch display.
This patch adds the FT5x06 device node to describe the actual hardware
connection and enables touch functionality on the Symphony board
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch introduces 2 simple aliases:
Add a gpio3->gpio4 alias to allow flexible access to these GPIOs
Add a gpio4 alias for the PCA9534 GPIO expander.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
PEB-WLBT-05 is an expansion board that provides WIFI and Bluetooth
functionality. It features the Ezurio Sterling LWB module [1].
Add missing regulator to baseboard dts.
[1] https://www.ezurio.com/wireless-modules/wifi-modules-bluetooth/sterling-lwb-24-ghz-wifi-4-bt-51-module
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i2c3 of the phyBOARD-Pollux is used on the CSI1 interface to connect
to imaging sensors. Thus define it so it can be easily enabled if
required.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The spi flash on the SoM is missing its vcc supply definition. Add
missing regulator which supplies the flash with 1.8V.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add 5v regulator to gpio fan node.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add audio XCVR sound card, which supports SPDIF TX & RX only,
eARC RX, ARC RX are not supported.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PDM micphone sound card support.
This sound card supports recording sound from PDM microphone
and convert the PDM format data to PCM data.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add WM8962 sound card support which connects to SAI3.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bt-sco sound card, which is used by BT HFP case.
It supports wb profile as default.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Refine label with "wm8962" and node name with "codec" to follow
devicetree specification.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The commit 616effc0272b5 ("arm64: dts: imx8: Fix lpuart DMA channel
order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss
update imx8qm-ss-dma.dtsi.
The commit 5a8e9b022e569 ("arm64: dts: imx8qm-ss-dma: Pass lpuart
dma-names") just simple add dma-names as binding doc requirement.
Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for
the FSL_EDMA_RX flag.
Fixes: 5a8e9b022e56 ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX8M Plus DHCOM
Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver
to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link
bouncing caused by interruptions on the PHY reference clock, by letting the
PHY driver manage the reference clock and assure there are no interruptions.
This follows the matching PHY driver recommendation described in commit
bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Fixes: 8d6712695bc8 ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
CAN1 and Micfil share pins on imx93-9x9-qsb board, use TMUX1574RSVR
to control the connection: put sel to high, select CAN1, put sel to
low, select Micfil. In default, sel keep low.
To support CAN1, need to put the sel to high. Besides, CAN1 use phy
TJA1057GT/3.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the
address for it in eth_mac1, eth_mac2 seems to be left unfused. In their
downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias
of eqos to ethernet0, the driver then fetches the mac address based on
the alias number.
Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to
point at eth_mac2 as it may be fused later even though it is disabled
by default.
With this changed barebox is now capable of loading the correct address.
Link: https://github.com/karo-electronics/karo-tx-uboot/blob/380543278410bbf04264d80a3bfbe340b8e62439/drivers/net/dwc_eth_qos.c#L1167 [1]
Link: https://github.com/karo-electronics/karo-tx-uboot/blob/380543278410bbf04264d80a3bfbe340b8e62439/arch/arm/dts/imx8mp-karo.dtsi#L12 [2]
Fixes: bac63d7c5f46 ("arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 03f07be54cdc ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 24e67d28ef95 ("dt-bindings: arm: fsl: Add GOcontroll Moduline Display")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
DRAM1 is only 2GiB in size (0x00_8000_0000 - 0x01_0000_0000) which is
already used by Linux kernel, etc. Move the allocation area of BMAN and
QMAN to DRAM1 region. This frees the complete DRAM2 area for e.g. CMA.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DTS code coding style expects lowercase hex for values and unit
addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251223152424.155253-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
|
|
When ksmbd_vfs_getattr() fails, the reference count of ksmbd_file
must be released.
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the command is a replay operation and -ENOEXEC is returned,
the refcount of ksmbd_file must be released.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close().
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In get_file_all_info(), if vfs_getattr() fails, the function returns
immediately without freeing the allocated filename, leading to a memory
leak.
Fix this by freeing the filename before returning in this error case.
Fixes: 5614c8c487f6a ("ksmbd: replace generic_fillattr with vfs_getattr")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
I've switched employers. Updating email address to be employer-agnostic and
remain reachable. Also updating mailmap so all my previous emails map to
this new one.
Signed-off-by: Saravana Kannan <saravanak@kernel.org>
Link: https://patch.msgid.link/20251229060350.852-1-saravanak@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add a new sysfs attribute called "cid" under struct acpi_device for
exposing the list of compatible device IDs returned by the device's
_CID object, if present.
The new attribute will be present only if the _CID object is present.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/5957407.DvuYhMxLoT@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- Revert commit "scripts/clang-tools: Handle included .c files in
gen_compile_commands" which is reported to cause false entries for
some files.
- Fix compilation of dtb specified on command-line without make rule
- mcb: Add missing modpost build support
* tag 'kbuild-fixes-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
mcb: Add missing modpost build support
kbuild: fix compilation of dtb specified on command-line without make rule
Revert "scripts/clang-tools: Handle included .c files in gen_compile_commands"
|
|
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI smart battery subsystem (SBS)
driver to a platform one.
After this conversion, acpi_smbus_hc_probe() does not need to populate the
driver_data pointer of the SMBUS HC platform device's ACPI companion any
more, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3390477.aeNJFYEL58@rafael.j.wysocki
|
|
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI SMBUS HC driver to a platform one.
After this conversion, acpi_ec_probe() does not need to populate the
driver_data pointer of the EC platform device's ACPI companion any
more, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13909645.uLZWGnKmhe@rafael.j.wysocki
|
|
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI embedded controller (EC) driver
to a platform one.
After this conversion, acpi_bus_register_early_device() does not need
to attempt to bind an ACPI driver to the struct acpi_device created by
it, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Removed excess semicolon ]
Link: https://patch.msgid.link/1946304.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To facilitate converting the ACPI EC driver into a platform one,
modify acpi_bus_register_early_device(), used by acpi_ec_ecdt_start()
for creating a struct acpi_device to represent the "early" EC based
on the ECDT ACPI table, to carry out the default ACPI enumeration for
the given device which will cause a platform device to be registered
for it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2397353.ElGaqSPkdT@rafael.j.wysocki
|
|
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI hardware error device (HED) driver
to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8620378.T7Z3S40VBb@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"27 hotfixes. 12 are cc:stable, 18 are MM.
There's a patch series from Jiayuan Chen which fixes some
issues with KASAN and vmalloc. Apart from that it's the usual
shower of singletons - please see the respective changelogs
for details"
* tag 'mm-hotfixes-stable-2025-12-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (27 commits)
mm/ksm: fix pte_unmap_unlock of wrong address in break_ksm_pmd_entry
mm/page_owner: fix memory leak in page_owner_stack_fops->release()
mm/memremap: fix spurious large folio warning for FS-DAX
MAINTAINERS: notify the "Device Memory" community of memory hotplug changes
sparse: update MAINTAINERS info
mm/page_alloc: report 1 as zone_batchsize for !CONFIG_MMU
mm: consider non-anon swap cache folios in folio_expected_ref_count()
rust: maple_tree: rcu_read_lock() in destructor to silence lockdep
mm: memcg: fix unit conversion for K() macro in OOM log
mm: fixup pfnmap memory failure handling to use pgoff
tools/mm/page_owner_sort: fix timestamp comparison for stable sorting
selftests/mm: fix thread state check in uffd-unit-tests
kernel/kexec: fix IMA when allocation happens in CMA area
kernel/kexec: change the prototype of kimage_map_segment()
MAINTAINERS: add ABI headers to KHO and LIVE UPDATE
.mailmap: remove one of the entries for WangYuli
mm/damon/vaddr: fix missing pte_unmap_unlock in damos_va_migrate_pmd_entry()
MAINTAINERS: update one straggling entry for Bartosz Golaszewski
mm/page_alloc: change all pageblocks migrate type on coalescing
mm: leafops.h: correct kernel-doc function param. names
...
|
|
Zen5 also contains family 1Ah, models 70h-7Fh, which are mistakenly missing
from cpu_has_entrysign(). Add the missing range.
Fixes: 8a9fb5129e8e ("x86/microcode/AMD: Limit Entrysign signature checking to known generations")
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20251229182245.152747-1-i@rong.moe
|
|
There exists a kernel oops caused by a BUG_ON(nhead < 0) at
net/core/skbuff.c:2232 in pskb_expand_head().
This bug is triggered as part of the calipso_skbuff_setattr()
routine when skb_cow() is passed headroom > INT_MAX
(i.e. (int)(skb_headroom(skb) + len_delta) < 0).
The root cause of the bug is due to an implicit integer cast in
__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure
that delta = headroom - skb_headroom(skb) is never negative, otherwise
we will trigger a BUG_ON in pskb_expand_head(). However, if
headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta
becomes negative, and pskb_expand_head() is passed a negative value for
nhead.
Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing
"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()
by only using skb_cow() to grow headroom.
PoC:
Using `netlabelctl` tool:
netlabelctl map del default
netlabelctl calipso add pass doi:7
netlabelctl map add default address:0::1/128 protocol:calipso,7
Then run the following PoC:
int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP);
// setup msghdr
int cmsg_size = 2;
int cmsg_len = 0x60;
struct msghdr msg;
struct sockaddr_in6 dest_addr;
struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1,
sizeof(struct cmsghdr) + cmsg_len);
msg.msg_name = &dest_addr;
msg.msg_namelen = sizeof(dest_addr);
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = cmsg;
msg.msg_controllen = cmsg_len;
msg.msg_flags = 0;
// setup sockaddr
dest_addr.sin6_family = AF_INET6;
dest_addr.sin6_port = htons(31337);
dest_addr.sin6_flowinfo = htonl(31337);
dest_addr.sin6_addr = in6addr_loopback;
dest_addr.sin6_scope_id = 31337;
// setup cmsghdr
cmsg->cmsg_len = cmsg_len;
cmsg->cmsg_level = IPPROTO_IPV6;
cmsg->cmsg_type = IPV6_HOPOPTS;
char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr);
hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80
sendmsg(fd, &msg, 0);
Fixes: 2917f57b6bc1 ("calipso: Allow the lsm to label the skbuff directly.")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20251219173637.797418-1-whrosenb@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported a crash [1] in dql_completed() after recent usbnet
BQL adoption.
The reason for the crash is that netdev_reset_queue() is called too soon.
It should be called after cancel_work_sync(&dev->bh_work) to make
sure no more TX completion can happen.
[1]
kernel BUG at lib/dynamic_queue_limits.c:99 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 5197 Comm: udevd Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:dql_completed+0xbe1/0xbf0 lib/dynamic_queue_limits.c:99
Call Trace:
<IRQ>
netdev_tx_completed_queue include/linux/netdevice.h:3864 [inline]
netdev_completed_queue include/linux/netdevice.h:3894 [inline]
usbnet_bh+0x793/0x1020 drivers/net/usb/usbnet.c:1601
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
bh_worker+0x2b1/0x600 kernel/workqueue.c:3611
tasklet_action+0xc/0x70 kernel/softirq.c:952
handle_softirqs+0x27d/0x850 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
invoke_softirq kernel/softirq.c:496 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:723
irq_exit_rcu+0x9/0x30 kernel/softirq.c:739
Fixes: 7ff14c52049e ("usbnet: Add support for Byte Queue Limits (BQL)")
Reported-by: syzbot+5b55e49f8bbd84631a9c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6945644f.a70a0220.207337.0113.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20251219144459.692715-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org
Fixes: 1dfc2e46117e ("gve: Refactor napi add and remove functions")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix subject-verb agreement for "has a requirements" as well as
"neither...or" conjunction mistake. And convert "Message Signalled
Interrupts" to "Message Signaled Interrupts" to match the PCIe spec.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/1766713528-173281-1-git-send-email-shawn.lin@rock-chips.com
|
|
The SpacemiT PCIe PHY driver depends on the common clock framework.
Not specifying that led to a failure when doing a COMPILE_TEST build
for the SPARC architecture.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512251903.sTVZgg6c-lkp@intel.com/
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251226173228.2020411-1-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Relocate the code that technically fits in the pin initializer into the
initializer itself.
While, thanks to pin_init_scope(), it is also possible to keep it as is,
moving appropriate code into the initializer has the advantage that it
structures the dependencies of fields naturally.
For instance, intermediate data that is only needed for a single field
goes into the initializer block of this field, making it obvious that it
is not needed by anything else.
On the other hand, intermediate data that is needed for multiple fields
to initialize remains above the initializer, naturally indicating that
it is needed my multiple fields.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://patch.msgid.link/20251218155239.25243-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In Gsp::new(), utilize pin_init_scope() to get rid of the Result in the
returned
Result<impl PinInit<T, Error>>
which is unnecessarily redundant.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://patch.msgid.link/20251218155239.25243-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
