| Age | Commit message (Collapse) | Author |
|---|
|
Use device-managed APi to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX95 imx-sm introduced new GPU_CGC clock since imx-sm commit
ca5e078833fa ("SM-128: Add clock management via CCM LPCG direct control")
which are downstream clock of GPU clock. These new GPU_CGC clock
gate the existing GPU clock. Currently, without clk_ignore_unused
on kernel command line, those new GPU_CGC clock are unused and the
kernel will disable them. This has no impact on i.MX95 A0/A1, but
does prevent GPU register access from working at all on i.MX95 B0.
The GPU_CGC clock are present on both i.MX95 A0/A1/B0, therefore
update the DT such, that the GPU core clock are the GPU_CGC clock.
When the panthor driver enables the GPU core clock, it enables both
the GPU_CGC as well as its parent GPU clock.
Fixes: 67934f248e64 ("arm64: dts: imx95: Describe Mali G310 GPU")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Device quirk to disable faulty temperature (Ilikara)
- TCP target null pointer fix from bad host protocol usage (Shivam)
- Add apple,t8103-nvme-ans2 as a compatible apple controller
(Janne)
- FC tagset leak fix (Chaitanya)
- TCP socket deadlock fix (Hannes)
- Target name buffer overrun fix (Shin'ichiro)
- Fix for an underflow for rnbd during device unmap
- Zero the non-PI part of the auto integrity buffer
- Fix for a configfs memory leak in the null block driver
* tag 'block-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
rnbd-clt: fix refcount underflow in device unmap path
nvme: fix PCIe subsystem reset controller state transition
nvmet: do not copy beyond sybsysnqn string length
nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()
null_blk: fix kmemleak by releasing references to fault configfs items
block: zero non-PI portion of auto integrity buffer
nvme-fc: release admin tagset if init fails
nvme-apple: add "apple,t8103-nvme-ans2" as compatible
nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec
nvme-pci: disable secondary temp for Wodposit WPBSNM8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix moving local task_work inside the cancelation loop,
rather than only before cancelations.
If any cancelations generate task_work, we do need to re-run it"
* tag 'io_uring-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: move local task_work in exit cancel loop
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch series removes multiple forward declarations from the SCSI disk (sd)
driver and also makes error messages easier to find with grep. Please consider
this patch series for the next merge window.
Thanks,
Bart.
Link: https://patch.msgid.link/20260114175054.4118163-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make it easier to find these error messages with grep. This patch has been
created as follows:
* Delete all occurrences of the following regular expression:
"[[:blank:]]*\\*\n[[:blank:]]*"
* Split long lines manually where necessary.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the sd_fops definition such that the sd_unlock_native_capacity()
forward declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the scsi_disk_release() function definition such that its forward
declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the sd_config_discard() function definition such that its
forward declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the sd_remove() function definition such that the sd_shutdown()
forward declaration can be removed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260114175054.4118163-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
JEDEC UFS spec defines 0xFFFFFFFF for dHIDAvailableSize as indicating no
valid fragmented size information. Returning the raw value can mislead
userspace. Return -ENODATA instead when the value is unavailable.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251226042825epcms2p6f02ba12fa97ff4a69c00f6fb9ff55603@epcms2p6
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member.
Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20260106205344.18031-1-jiashengjiangcool@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Notify the UFS phy of the hibern8 link state so that it can program the
appropriate values.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260109-ufs-exynos-phy_notify_pmstate-v3-1-7eb692e271af@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-3-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In iscsit_dec_conn_usage_count(), the function calls complete() while
holding the conn->conn_usage_lock. As soon as complete() is invoked, the
waiter (such as iscsit_close_connection()) may wake up and proceed to free
the iscsit_conn structure.
If the waiter frees the memory before the current thread reaches
spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function
attempts to release a lock within the already-freed connection structure.
Fix this by releasing the spinlock before calling complete().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-2-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
each other
The fragile ordering between marking commands completed or failed so
that the error handler only wakes when the last running command
completes or times out has race conditions. These race conditions can
cause the SCSI layer to fail to wake the error handler, leaving I/O
through the SCSI host stuck as the error state cannot advance.
First, there is an memory ordering issue within scsi_dec_host_busy().
The write which clears SCMD_STATE_INFLIGHT may be reordered with reads
counting in scsi_host_busy(). While the local CPU will see its own
write, reordering can allow other CPUs in scsi_dec_host_busy() or
scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to
see a host busy equal to the host_failed count.
This race condition can be prevented with a memory barrier on the error
path to force the write to be visible before counting host busy
commands.
Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By
counting busy commands before incrementing host_failed, it can race with a
final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does
not see host_failed incremented but scsi_eh_inc_host_failed() counts busy
commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),
resulting in neither waking the error handler task.
This needs the call to scsi_host_busy() to be moved after host_failed is
incremented to close the race condition.
Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260113161036.6730-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The Hyper-V host does not support MODE_SENSE_10 and MODE_SENSE. The
driver handles MODE_SENSE as unsupported command, but not for
MODE_SENSE_10. Add MODE_SENSE_10 to the same handling logic and return
correct code to SCSI layer.
Fixes: 89ae7d709357 ("Staging: hv: storvsc: Move the storage driver out of the staging area")
Cc: stable@kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260117010302.294068-1-longli@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_eiointc_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_ipi_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The binding wants the node to be named "i2c-number", but those are named
"i2c-gpio-number" instead.
Thus rename those to i2c-0, i2c-1 to adhere to the binding and suppress
dtbs_check warnings.
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a3206 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When validating a perf event group, validate_group() unconditionally
attempts to allocate hardware PMU counters for the leader, sibling
events and the new event being added.
This is incorrect for mixed-type groups. If a PERF_TYPE_SOFTWARE event
is part of the group, the current code still tries to allocate a hardware
PMU counter for it, which can wrongly consume hardware PMU resources and
cause spurious allocation failures.
Fix this by only allocating PMU counters for hardware events during group
validation, and skipping software events.
A trimmed down reproducer is as simple as this:
#include <stdio.h>
#include <assert.h>
#include <unistd.h>
#include <string.h>
#include <sys/syscall.h>
#include <linux/perf_event.h>
int main (int argc, char *argv[])
{
struct perf_event_attr attr = { 0 };
int fds[5];
attr.disabled = 1;
attr.exclude_kernel = 1;
attr.exclude_hv = 1;
attr.read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING | PERF_FORMAT_ID | PERF_FORMAT_GROUP;
attr.size = sizeof (attr);
attr.type = PERF_TYPE_SOFTWARE;
attr.config = PERF_COUNT_SW_DUMMY;
fds[0] = syscall (SYS_perf_event_open, &attr, 0, -1, -1, 0);
assert (fds[0] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CPU_CYCLES;
fds[1] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[1] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_INSTRUCTIONS;
fds[2] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[2] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_BRANCH_MISSES;
fds[3] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[3] >= 0);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CACHE_REFERENCES;
fds[4] = syscall (SYS_perf_event_open, &attr, 0, -1, fds[0], 0);
assert (fds[4] >= 0);
printf ("PASSED\n");
return 0;
}
Cc: stable@vger.kernel.org
Fixes: b37042b2bb7c ("LoongArch: Add perf events support")
Signed-off-by: Lisa Robinson <lisa@bytefly.space>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add child node nand@0 and move NAND related property under it to align
modern nand-controller.yaml.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtb: nand-controller@1806000 (fsl,imx6q-gpmi-nand): Unevaluated properties are not allowed ('nand-ecc-mode', 'nand-ecc-step-size', 'nand-ecc-strength', 'nand-on-flash-bbt' were unexpected)
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Since 2019 year, commit
(212e496935929 dt-bindings: mtd: Add YAML schemas for the generic NAND options)
NAND related property is preferred located under nand@<n> even though only
one NAND chip supported.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update gpmi #size-cells to 0 to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dtb: nand-controller@1806000 (fsl,imx6sx-gpmi-nand): #size-cells: 0 was expected
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add '#address-cells' and '#size-cells' for gpmi-nand to below CHECK_DTBS
warings:
arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dtb: nand-controller@112000 (fsl,imx6q-gpmi-nand): '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add debugfs interface to read System Manager syslog info
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
MISC protocol supports getting system log regarding system sleep latency,
wakeup interrupt and etc. Add the API for user to retrieve the information
from SM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Introduce context-based invalidation support to the GuC TLB invalidation
backend. This is implemented by iterating over each exec queue per GT
within a VM, skipping inactive queues, and issuing a context-based (GuC
ID) H2G TLB invalidation. All H2G messages, except the final one, are
sent with an invalid seqno, which the G2H handler drops to ensure the
TLB invalidation fence is only signaled once all H2G messages are
completed.
A watermark mechanism is also added to switch between context-based TLB
invalidations and full device-wide invalidations, as the return on
investment for context-based invalidation diminishes when many exec
queues are mapped.
v2:
- Fix checkpatch warnings
v3:
- Rebase on PRL
- Use ref counting to avoid racing with deregisters
v4:
- Extra braces (Stuart)
- Use per GT list (CI)
- Reorder put
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-12-matthew.brost@intel.com
|
|
If an exec queue is inactive (e.g., not registered or scheduling is
disabled), TLB invalidations are not issued for that queue. Add a
virtual function to determine the active state, which TLB invalidation
logic can hook into.
v5:
- Operate on primary in active function
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-11-matthew.brost@intel.com
|
|
Introduce the xe_tlb_inval_idle helper to detect whether any TLB
invalidations are currently in flight. This is used in context-based TLB
invalidations to determine whether dummy TLB invalidations need to be
sent to maintain proper TLB invalidation fence ordering..
v2:
- Implement xe_tlb_inval_idle based on pending list
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-10-matthew.brost@intel.com
|
|
Extract the common code that issues a TLB invalidation H2G for PPGTTs
into a helper function. This helper can be reused for both ASID-based
and context-based TLB invalidations.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-9-matthew.brost@intel.com
|
|
Context-based TLB invalidations have their own set of GuC TLB
invalidation operations. Rename the current PPGTT invalidation function,
which operates on ASIDs, to a more descriptive name that reflects its
purpose.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-8-matthew.brost@intel.com
|
|
Taint TLB invalidation seqno lock with GFP_KERNEL as TLB invalidations
can be in the path of reclaim (e.g., MMU notifiers).
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-7-matthew.brost@intel.com
|
|
Maintain a list of exec queues per vm which will be used by TLB
invalidation code to do context-ID based tlb invalidations.
v4:
- More asserts (Stuart)
- Per GT list (CI)
- Skip adding / removal if context TLB invalidatiions not supported
(Stuart)
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-6-matthew.brost@intel.com
|
|
Introduce the xe_device_asid_to_vm helper, which can be used throughout
the driver to resolve the VM from a given ASID.
v4:
- Move forward declare after includes (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-5-matthew.brost@intel.com
|
|
Add has_ctx_tlb_inval to device info indicating a device has context
basd TLB invalidation.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-4-matthew.brost@intel.com
|
|
Ensure the asid_to_vm lookup is reclaim-safe so it can be performed
during TLB invalidations, which is necessary for context-based TLB
invalidation support.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-3-matthew.brost@intel.com
|
|
Extract the code that determines the alignment of TLB invalidation into
a helper function — normalize_invalidation_range. This will be useful
when adding context-based invalidations to the GuC TLB invalidation
backend.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-2-matthew.brost@intel.com
|
|
xe3p_xpc supports multi_queue, enable it.
v2: Rename multi_queue_enable_mask to multi_queue_engine_class_mask
(Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260116220333.861850-3-matthew.brost@intel.com
|
|
In multi-queue mode, we only have control over the entire group, so we
cannot ban individual queues or signal fences until the whole group is
removed from hardware. Implement banning of the entire group if any job
within it times out.
v2:
- Fix lock inversion (Niranjana)
- Initialize new queues in group to stopped
v3:
- Blindly call xe_exec_queue_multi_queue_primary (Niranjana)
- More comments around temporary list when stopping (Niranjana)
- Restart group on false timeout (Niranjana)
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260116220333.861850-2-matthew.brost@intel.com
|
|
Add thermal-sensor and thermal-zone support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Calling of_platform_populate() without a match table will only populate
the immediate child nodes under /firmware. This is usually fine, but in
the case of something like a "simple-mfd" node such as
"raspberrypi,bcm2835-firmware", those child nodes will not be populated.
And subsequent calls won't work either because the /firmware node is
marked as processed already.
Switch the call to of_platform_default_populate() to solve this problem.
It should be a nop for existing cases.
Fixes: 3aa0582fdb82 ("of: platform: populate /firmware/ node from of_platform_default_populate_init()")
Cc: stable@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20260114015158.692170-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
After commit f6bff7827a48 ("riscv: uaccess: use 'asm_goto_output' for
get_user()"), which was the first commit that started using asm goto
with outputs on RISC-V, builds of clang built with assertions enabled
start crashing in certain files that use get_user() with:
clang: llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp:12743: Register FollowCopyChain(MachineRegisterInfo &, Register): Assertion `MI->getOpcode() == TargetOpcode::COPY && "start of copy chain MUST be COPY"' failed.
Internally, LLVM generates an addiw instruction when the output of the
inline asm (which may be any scalar type) needs to be sign extended for
ABI reasons, such as a later function call, so that basic block does not
have to do it.
Use a temporary 64-bit variable as the output of the inline assembly in
__get_user_asm() and explicitly cast it to truncate it if necessary,
avoiding the addiw that triggers the assertion.
Link: https://github.com/ClangBuiltLinux/linux/issues/2092
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260116-riscv-wa-llvm-asm-goto-outputs-assertion-failure-v3-1-55b5775f989b@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Tegra30 has CSI pad bits in both PLLD and PLLD2 clocks that are required
for the correct work of the CSI block. Add CSI pad A and pad B clock gates
with PLLD/PLLD2 parents, respectively. Add a plld2 spinlock, like one plld
uses, to prevent simultaneous access since both the PLLDx and CSIx_PAD
clocks use the same registers
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The CSUS clock is a clock gate for the output clock signal primarily
sourced from the VI_SENSOR clock. This clock signal is used as an input
MCLK clock for cameras.
Unlike later Tegra SoCs, the Tegra 20 can change its CSUS parent, which is
why csus_mux is added in a similar way to how CDEV1 and CDEV2 are handled.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Existing Parallel VI interface schema for Tegra20 is fully compatible with
Tegra30; hence, lets reuse it by setting fallback for Tegra30.
Adjust existing VI schema to reflect that Tegra20 VI is compatible with
Tegra30 by setting a fallback for Tegra30. Additionally, switch to using
an enum instead of list of const.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
