| Age | Commit message (Collapse) | Author |
|---|
|
Add compatible string for SpacemiT K3 APLIC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-3-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Add compatible string for SpacemiT K3 CLINT.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-2-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Add compatible string for the SpacemiT X100 core. [1]
The X100 is a 64-bit RVA23-compliant RISC-V core from SpacemiT. X100
supports the RISC-V vector and hypervisor extensions and all mandatory
extersions as required by the RVA23U64 and RVA23S64 profiles, per the
definition in 'RVA23 Profile, Version 1.0'. [2]
From a microarchieture viewpoint, the X100 features a 4-issue
out-of-order pipeline.
X100 is used in SpacemiT K3 SoC.
Acked-by: Paul Walmsley <pjw@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://www.spacemit.com/en/spacemit-x100-core/ [1]
Link: https://docs.riscv.org/reference/profiles/rva23/_attachments/rva23-profile.pdf [2]
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-1-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
"b" is ratified (Apr/2024) much later than its components zba/zbb/zbs
(Jun/2021). With "b" added into riscv/extensions.yaml, a dependency
checking rule is now enforced, which requires that when zba, zbb, and zbs
are all specified, "b" must be added as well. Failing to do this will
cause dtbs_check schema check warnings.
According to uabi.rst, as a single-letter extension, "b" should be added
after "c" in canonical order.
Update k1.dtsi to conform to this rule.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260115-adding-b-dtsi-v2-4-254dd61cf947@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Enable the DWC3 USB 3.0 controller and its associated usbphy2 on the
Banana Pi F3 board.
The board utilizes a VLI VL817 hub, which requires two separate power
supplies: one VBUS and one for hub itself. Add two GPIO-controlled
fixed-regulators to manage this.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260111-k1-usb3dts-v2-v3-3-f5ebd546e904@linux.dev
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add node for the Synopsys DWC3 USB 3.0 host controller on the K1 SoC.
The controller resides on the 'storage-bus' and uses its DMA
translations.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260111-k1-usb3dts-v2-v3-2-f5ebd546e904@linux.dev
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
K1's DWC3 USB 3.0 controller requires two separate PHYs to function:
the USB 3.0 combophy (for SuperSpeed) and a USB 2.0 PHY (for High-Speed,
Full-Speed, etc.).
Add node for this second USB 2.0 PHY (usbphy2).
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260111-k1-usb3dts-v2-v3-1-f5ebd546e904@linux.dev
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Request two reset line explicitly for SDHCI controller.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251223-07-k1-sdhci-reset-v2-3-5b8248cfc522@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add resets property to K1 I2C node.
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Link: https://lore.kernel.org/r/20251230150653.42097-3-jyc0019@gmail.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
O_ is interpreted as a broken hyperlink target. Escape _ with a backslash.
The asterisk in "struct file *" is interpreted as an opening emphasis
string that never closes. Replace double quotes with rST backticks.
Change "a ERR_PTR" to "an ERR_PTR".
Signed-off-by: Jay Winston <jaybenjaminwinston@gmail.com>
Link: https://patch.msgid.link/20260118110401.2651-1-jaybenjaminwinston@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
of_drm_find_and_get_bridge()
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done. Also switch to the drm_bridge::next_bridge pointer.
This needs to handle both cases: when of_drm_find_panel() succeeds and when
it fails.
In the 'else' case (i.e. when of_drm_find_panel() fails), just switch to
of_drm_find_and_get_bridge() to ensure the bridge is not freed while in use
in the function tail, when it is stored in dsi->bridge.next_bridge.
In the 'then' case (i.e. when of_drm_find_panel() succeeds),
devm_drm_panel_bridge_add() already increments the refcount using devres
which ties the bridge allocation lifetime to the device lifetime, so we
would not need to do anything. However to have the same behaviour in both
branches take an additional reference here, so that the bridge needs to be
put whichever branch is taken without more complicated logic. Ensure to
clear the bridge pointer however, to avoid calling drm_bridge_put() on an
ERR_PTR.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-12-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
pointer as an error indicator
In preparation to handle refcounting of the out_bridge, we need to ensure
the out_bridge pointer contains either a valid bridge pointer or NULL, not
an ERR_PTR. Otherwise calls such as drm_bridge_get/put() would try to
redeference an ERR_PTR.
Stop using IS_ERR(next_bridge) as an indication of an error, and instead
use the 'ret' integer.
No functional change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-11-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
for the next bridge
In preparation to handle refcounting of the out_bridge, we need to ensure
the out_bridge pointer contains either a valid bridge pointer or NULL, not
an ERR_PTR. Otherwise calls such as drm_bridge_get/put() would try to
redeference an ERR_PTR.
As a preliminary cleanup, add a temporary local 'next_bridge' pointer and
only copy it in dsi->out_bridge as late as possible, i.e. just before
calling pdata->host_ops->attach() which uses it (only in the exynos
driver).
Not strictly needed, but for symmetry move the clearing of dsi->out_bridge
in samsung_dsim_host_detach() to after pdata->host_ops->detach().
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-10-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
Since the companion bridge pointer is used by many bridge funcs, putting
its reference in the remove function would be dangerous. Use .destroy to
put it on final deallocation.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-9-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-8-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-7-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-6-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-5-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-4-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-3-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-2-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
drm_of_panel_bridge_remove() uses of_graph_get_remote_node() to get a
device_node but does not put the node reference.
Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function")
Cc: stable@vger.kernel.org # v4.15
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-1-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
New WMI drivers should use the new buffer-based WMI API instead of
the deprecated ACPI-based API. Update the driver development guide
to recommend the buffer-based API to driver developers and explain
the purpose of struct wmi_buffer.
Also update the ACPI interface documentation to describe the
conversion rules for converting ACPI objects into WMI buffers.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-10-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use the new buffer-based WMI API to also support ACPI firmware
implementations that do not use ACPI buffers to return the BMOF data.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-9-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use the new buffer-based WMI API to avoid having to deal with ACPI
at all.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-8-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use the new buffer-based WMI API to avoid having to deal with ACPI
at all.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-7-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use the new buffer-based WMI API to also support ACPI firmware
implementations that return a ACPI buffer instead of a ACPI integer.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The string conversion frunctions provided by the WMI driver core
have no dependencies on the remaining WMI API, making them suitable
for unit tests.
Implement such a unit test using kunit. Those unit tests verify that
converting between WMI strings and UTF8 strings works as expected.
They also verify that edge cases are handled correctly.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
WMI strings are encoded using UTF16-LE characters, forcing WMI drivers
to manually convert them to/from standard UTF8 strings. Add a two
helper functions for those tasks.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The marshalling code used by the WMI driver core is implemented as
a separate component, suitable for unit tests.
Implmented such a unit test using KUnit. Those unit tests verify that
ACPI objects are correctly converted into WMI buffers and that WMI
strings are correctly converted into ACPI strings. They also verify
that invalid ACPI data (like nested packages) is rejected.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Windows WMI-ACPI driver likely uses wmilib [1] to interact with
the WMI service in userspace. Said library uses plain byte buffers
for exchanging data, so the WMI-ACPI driver has to convert between
those byte buffers and ACPI objects returned by the ACPI firmware.
The format of the byte buffer is publicly documented [2], and after
some reverse eingineering of the WMI-ACPI driver using a set of custom
ACPI tables, the following conversion rules have been discovered:
- ACPI integers are always converted into a uint32
- ACPI strings are converted into special WMI strings
- ACPI buffers are copied as-is
- ACPI packages are unpacked
Extend the ACPI-WMI driver to also perform this kind of marshalling
for WMI data blocks, methods and events. Doing so gives us a number
of benefits:
- WMI drivers are not restricted to a fixed set of supported ACPI data
types anymore, see dell-wmi-aio (integer vs buffer) and
hp-wmi-sensors (string vs buffer)
- correct marshalling of WMI strings when data blocks are marked
as requiring ACPI strings instead of ACPI buffers
- development of WMI drivers without having to understand ACPI
This eventually should result in better compatibility with some
ACPI firmware implementations and in simpler WMI drivers. There are
however some differences between the original Windows driver and
the ACPI-WMI driver when it comes to ACPI object conversions:
- the Windows driver copies internal _ACPI_METHOD_ARGUMENT_V1 data
structures into the output buffer when encountering nested ACPI
packages. This is very likely an error inside the driver itself, so
we do not support nested ACPI packages.
- when converting WMI strings (UTF-16LE) into ACPI strings (ASCII),
the Windows driver replaces non-ascii characters (ä -> a, & -> ?)
instead of returning an error. This behavior is not documented
anywhere and might lead to severe errors in some cases (like
setting BIOS passwords over WMI), so we simply return an error.
As the current bus-based WMI API is based on ACPI buffers, a new
API is necessary. The legacy GUID-based WMI API is not extended to
support marshalling, as WMI drivers using said API are expected to
move to the bus-based WMI API in the future.
[1] https://learn.microsoft.com/de-de/windows-hardware/drivers/ddi/wmilib/
[2] https://learn.microsoft.com/en-us/windows-hardware/drivers/kernel/
driver-defined-wmi-data-items
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The upper limit of the firmware queue fill state for each APQN
is reported by the hwinfo.qd field. This field shows the
numbers 0-7 for 1-8 queue spaces available. But the exploiting
code assumed the real boundary is stored there and thus stoppes
queuing in messages one tick too early.
Correct the limit calculation and thus offer a boost
of 12.5% performance for high traffic on one APQN.
Fixes: d4c53ae8e4948 ("s390/ap: store TAPQ hwinfo in struct ap_card")
Cc: stable@vger.kernel.org
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
min_t(u8, a, b) casts both its arguments to u8 potentially discarding
signifinact bits.
Use min(a, b) instead as it cannot discard significant bits.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251119224140.8616-21-david.laight.linux@gmail.com
|
|
During normal playback, stream-on for input is followed by output, and
only after input stream-on does actual streaming begin. However, when
gst-play performs a seek, both input and output streams are stopped,
and on restart, output stream-on occurs first. At this point, firmware
has not yet started streaming. Queuing output buffers before the firmware
begins streaming causes it to process buffers in an invalid state, leading
to an error response. These buffers are returned to the driver as errors,
forcing the driver into an error state and stopping playback.
Fix this by deferring output buffer queuing until stream-on completes.
Input buffers can still be queued before stream-on as required.
Fixes: 92e007ca5ab6 ("media: iris: Add V4L2 streaming support for encoder video device")
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that.
Fixes: 11712ce70f8e ("media: iris: implement vb2 streaming ops")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware.
Fixes: 73702f45db81 ("media: iris: allocate, initialize and queue internal buffers")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The resolution property is not supposed to be set during reconfig.
Existing iris_drc_pending(inst) check is insufficient, as it doesn't
cover the first port setting change.
Extend the conditional check to also skip resolution setting when
the instance is in IRIS_INST_SUB_FIRST_IPSC.
Fixes: caf205548769 ("media: iris: Avoid updating frame size to firmware during reconfig")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers.
Fixes: 73702f45db81 ("media: iris: allocate, initialize and queue internal buffers")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails.
Fixes: a5925a2ce077 ("media: iris: add VPU33 specific encoding buffer calculation")
Fixes: a6882431a138 ("media: iris: Add support for ENUM_FRAMESIZES/FRAMEINTERVALS for encoder")
Cc: stable@vger.kernel.org
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
handling
Currently v4l2_m2m_ioctl_{de,enc}coder_cmd is being invoked during STOP
command handling. However, this is not required as the iris driver has
its own drain and stop handling mechanism in place.
Using the m2m command API in this context leads to incorrect behavior,
where the LAST flag is prematurely attached to a capture buffer,
when there are no buffers in m2m source queue. But, in this scenario
even though the source buffers are returned to client, hardware might
still need to process the pending capture buffers.
Attaching LAST flag prematurely can result in the capture buffer being
removed from the destination queue before the hardware has finished
processing it, causing issues when the buffer is eventually returned by
the hardware.
To prevent this, remove the m2m API usage in stop handling.
Fixes: d09100763bed ("media: iris: add support for drain sequence")
Fixes: 75db90ae067d ("media: iris: Add support for drain sequence in encoder video device")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
According to 4.5.1.5 of the M2M stateful decoder UAPI documentation,
providing the width and the height to S_FMT is "required only if it
cannot be parsed from the stream", otherwise they can be left as 0
and the S_FMT implementation is expected to return a valid placeholder
resolution that would let REQBUFS succeed.
iris was missing the fallback, so clients like rpi-ffmpeg wouldn't work.
Fix by adding an explicit fallback to defaults.
Fixes: b530b95de22c ("media: iris: implement s_fmt, g_fmt and try_fmt ioctls")
Link: https://github.com/jc-kynesim/rpi-ffmpeg/issues/103
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
iris_venc_s_param() uses do_div to divide two 64 bits operators, this is
wrong. Luckily for us, both of the operators fit in 32 bits, so we can use
a normal division.
Now that we are at it, mark the fps smaller than 1 as invalid, the code
does not seem to handle them properly.
The following cocci warning is fixed with this patch:
./platform/qcom/iris/iris_venc.c:378:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Fixes: 4ff586ff28e3 ("media: iris: Add support for G/S_PARM for encoder video device")
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When the ffmpeg decoder is running, the driver receives the
V4L2_BUF_FLAG_KEYFRAME flag in the input buffer. The driver then forwards
this flag information to the firmware. The firmware, in turn, copies the
input buffer flags directly into the output buffer flags. Upon receiving
the output buffer from the firmware, the driver observes that the buffer
contains the HFI_BUFFERFLAG_DATACORRUPT flag. The root cause is that both
V4L2_BUF_FLAG_KEYFRAME and HFI_BUFFERFLAG_DATACORRUPT are the same value.
As a result, the driver incorrectly interprets the output frame as
corrupted, even though the frame is actually valid. This misinterpretation
causes the driver to report an error and skip good frames, leading to
missing frames in the final video output and triggering ffmpeg's "corrupt
decoded frame" error.
To resolve this issue, the input buffer flags should not be sent to the
firmware during decoding, since the firmware does not require this
information.
Fixes: 17f2a485ca67 ("media: iris: implement vb2 ops for buf_queue and firmware response")
Cc: stable@vger.kernel.org
Signed-off-by: Vishnu Reddy <quic_bvisredd@quicinc.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This reverts commit ad699fa78b59241c9d71a8cafb51525f3dab04d4.
Revert the check that skipped stop_streaming when the instance was in
IRIS_INST_ERROR, as it caused multiple regressions:
1. Buffers were not returned to vb2 when the instance was already in
error state, triggering warnings in the vb2 core because buffer
completion was skipped.
2. If a session failed early (e.g. unsupported configuration), the
instance transitioned to IRIS_INST_ERROR. When userspace attempted
to stop streaming for cleanup, stop_streaming was skipped due to the
added check, preventing proper teardown and leaving the firmware
in an inconsistent state.
Fixes: ad699fa78b59 ("media: iris: Add sanity check for stop streaming")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add ASUS ExpertBook PM1503CDA to the DMI quirks table to enable
internal DMIC support via the ACP6x machine driver.
Signed-off-by: Anatolii Shirykalov <pipocavsobake@gmail.com>
Link: https://patch.msgid.link/20260119145618.3171435-1-pipocavsobake@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
imx-card currently sets the slot width to the physical sample width
for I2S links. This breaks controllers that use fixed-width slots
(e.g. 32-bit FIFO words), causing the unused bits in the slot to
contain undefined data when playing 16-bit streams.
Do not override the slot width in the machine driver and let the CPU
DAI select an appropriate default instead. This matches the behavior
of simple-audio-card and avoids embedding controller-specific policy
in the machine driver.
On an i.MX8MP-based board using SAI as the I2S master with 32-bit slots,
playing 16-bit audio resulted in spurious frequencies and an incorrect
SAI data waveform, as the slot width was forced to 16 bits. After this
change, audio artifacts are eliminated and the 16-bit samples correctly
occupy the first half of the 32-bit slot, with the remaining bits padded
with zeroes.
Cc: stable@vger.kernel.org
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260118205030.1532696-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Include linux/types.h for u8.
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://patch.msgid.link/20260107152704.2290146-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Venus encoder and decoder video devices currently report the same
bus_info string ("platform:qcom-venus").
Assign unique bus_info identifiers by appending ":dec" and ":enc" to the
parent device name. With this change v4l2-ctl will display two separate
logical devices
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
On SM8250 (IRIS2) with firmware older than 1.0.087, the firmware could
not handle a dummy device address for EOS buffers, so a NULL device
address is sent instead. The existing check used IS_V6() alongside a
firmware version gate:
if (IS_V6(core) && is_fw_rev_or_older(core, 1, 0, 87))
fdata.device_addr = 0;
else
fdata.device_addr = 0xdeadb000;
However, SC7280 which is also V6, uses a firmware string of the form
"1.0.<commit-hash>", which the version parser translates to 1.0.0. This
unintentionally satisfies the `is_fw_rev_or_older(..., 1, 0, 87)`
condition on SC7280. Combined with IS_V6() matching there as well, the
quirk is incorrectly applied to SC7280, causing VP9 decode failures.
Constrain the check to IRIS2 (SM8250) only, which is the only platform
that needed this quirk, by replacing IS_V6() with IS_IRIS2(). This
restores correct behavior on SC7280 (no forced NULL EOS buffer address).
Fixes: 47f867cb1b63 ("media: venus: fix EOS handling in decoder stop command")
Cc: stable@vger.kernel.org
Reported-by: Mecid <mecid@mecomediagroup.de>
Closes: https://github.com/qualcomm-linux/kernel-topics/issues/222
Co-developed-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
