| Age | Commit message (Collapse) | Author |
|---|
|
Adds a lock around irdma_sc_ccq_arm body to prevent inter-thread data race.
Fixes data race in irdma_sc_ccq_arm() reported by KCSAN:
BUG: KCSAN: data-race in irdma_sc_ccq_arm [irdma] / irdma_sc_ccq_arm [irdma]
read to 0xffff9d51b4034220 of 8 bytes by task 255 on cpu 11:
irdma_sc_ccq_arm+0x36/0xd0 [irdma]
irdma_cqp_ce_handler+0x300/0x310 [irdma]
cqp_compl_worker+0x2a/0x40 [irdma]
process_one_work+0x402/0x7e0
worker_thread+0xb3/0x6d0
kthread+0x178/0x1a0
ret_from_fork+0x2c/0x50
write to 0xffff9d51b4034220 of 8 bytes by task 89 on cpu 3:
irdma_sc_ccq_arm+0x7e/0xd0 [irdma]
irdma_cqp_ce_handler+0x300/0x310 [irdma]
irdma_wait_event+0xd4/0x3e0 [irdma]
irdma_handle_cqp_op+0xa5/0x220 [irdma]
irdma_hw_flush_wqes+0xb1/0x300 [irdma]
irdma_flush_wqes+0x22e/0x3a0 [irdma]
irdma_cm_disconn_true+0x4c7/0x5d0 [irdma]
irdma_disconnect_worker+0x35/0x50 [irdma]
process_one_work+0x402/0x7e0
worker_thread+0xb3/0x6d0
kthread+0x178/0x1a0
ret_from_fork+0x2c/0x50
value changed: 0x0000000000024000 -> 0x0000000000034000
Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-2-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Translate .../scsi/wd719x.rst into Chinese.
Add wd719x into .../scsi/index.rst.
Update the translation through commit 40ee63091a40
("scsi: docs: convert wd719x.txt to ReST")
Signed-off-by: Yujie Zhang <yjzhang@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Translate .../scsi/libsas.rst into Chinese.
Add libsas into .../scsi/index.rst.
Update the translation through commit 25882c82f850
("scsi: libsas: Delete lldd_clear_aca callback")
Signed-off-by: Yujie Zhang <yjzhang@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Enable SPK Mute Led and Mic Mute Led for HP ZBook X G2i platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://patch.msgid.link/ab5d4498f7454b25b245a3bad8fb95b3@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
My laptop, HP ProBook 450 G8 (32M40EA), has Realtek ALC236 codec on its
integrated sound card, and uses GPIO pins 0x2 and 0x1 for speaker mute
and mic mute LEDs correspondingly, as found out by me through hda-verb
invocations. This matches the GPIO masks used by the
alc236_fixup_hp_gpio_led() function.
PCI subsystem vendor and device IDs happen to be 0x103c and 0x8a75,
which has not been covered in the ALC2xx driver code yet.
Signed-off-by: Ilyas Gasanov <public@gsnoff.com>
Link: https://patch.msgid.link/20251125235441.53629-1-public@gsnoff.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Suzuki notices that making the ICH_HCR_EL2_TDIR capability a system
one isn't a very good idea, should we end-up with CPUs that have
asymmetric TDIR support (somehow unlikely, but you never know what
level of stupidity vendors are up to). For this hypothetical setup,
making this an "EARLY_LOCAL_CPU_FEATURE" is a much better option.
This is actually consistent with what we already do with GICv5
legacy interface, so flip the capability over.
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 2a28810cbb8b2 ("KVM: arm64: GICv3: Detect and work around the lack of ICV_DIR_EL1 trapping")
Link: https://lore.kernel.org/r/5df713d4-8b79-4456-8fd1-707ca89a61b6@arm.com
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://msgid.link/20251125160144.1086511-1-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Correct the spelling error in the DFSO_DOWNDIFFERENTIAL macro
definition and update the corresponding variable assignment.
The macro was previously misspelled as DFSO_DOWNDIFFERENCTIAL.
This change ensures consistent and correct spelling throughout
the simpleondemand governor implementation.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/20251118032339.2799230-1-luriwen@kylinos.cn/
|
|
The error case in fbnic_alloc_napi_vectors defaulted to returning
ENOMEM. This can mask the true error case, causing confusion.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251124200518.1848029-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
selftest: af_unix: Misc updates.
Patch 1 add .gitignore under tools/testing/selftests/net/af_unix/.
Patch 2 make so_peek_off.c less flaky.
====================
Link: https://patch.msgid.link/20251124212805.486235-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
so_peek_off.c is reported to be flaky on NIPA:
# # so_peek_off.c:149:two_chunks_overlap_blocking:Expected -1 (-1) != bytes (-1)
# # two_chunks_overlap_blocking: Test terminated by assertion
# # FAIL so_peek_off.stream.two_chunks_overlap_blocking
The test fork()s a child process to send() data after 1ms to
wake up the parent process being blocked (up to 3ms) on recv().
But, from the log, the parent woke up after 3ms timeout, so it
could be too short when the host is overloaded.
Let's extend it to 5s.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251124070722.1e828c53@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124212805.486235-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Somehow AF_UNIX tests have reused ../.gitignore,
but now NIPA warns about it.
Let's create .gitignore under af_unix/.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124212805.486235-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 30f241fcf52a ("xsk: Fix immature cq descriptor
production"), the descriptor number is stored in skb control block and
xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto
pool's completion queue.
skb control block shouldn't be used for this purpose as after transmit
xsk doesn't have control over it and other subsystems could use it. This
leads to the following kernel panic due to a NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 1 PID: 927 Comm: p4xsk.bin Not tainted 6.16.12+deb14-cloud-amd64 #1 PREEMPT(lazy) Debian 6.16.12-1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:xsk_destruct_skb+0xd0/0x180
[...]
Call Trace:
<IRQ>
? napi_complete_done+0x7a/0x1a0
ip_rcv_core+0x1bb/0x340
ip_rcv+0x30/0x1f0
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x87/0x130
__napi_poll+0x28/0x180
net_rx_action+0x339/0x420
handle_softirqs+0xdc/0x320
? handle_edge_irq+0x90/0x1e0
do_softirq.part.0+0x3b/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x60/0x70
__dev_direct_xmit+0x14e/0x1f0
__xsk_generic_xmit+0x482/0xb70
? __remove_hrtimer+0x41/0xa0
? __xsk_generic_xmit+0x51/0xb70
? _raw_spin_unlock_irqrestore+0xe/0x40
xsk_sendmsg+0xda/0x1c0
__sys_sendto+0x1ee/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x84/0x2f0
? __pfx_pollwake+0x10/0x10
? __rseq_handle_notify_resume+0xad/0x4c0
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x204/0x2f0
? do_syscall_64+0x204/0x2f0
? do_syscall_64+0x204/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Instead use the skb destructor_arg pointer along with pointer tagging.
As pointers are always aligned to 8B, use the bottom bit to indicate
whether this a single address or an allocated struct containing several
addresses.
Fixes: 30f241fcf52a ("xsk: Fix immature cq descriptor production")
Closes: https://lore.kernel.org/netdev/0435b904-f44f-48f8-afb0-68868474bf1c@nop.hu/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20251124171409.3845-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch refines and strengthens the statistics collection of TX queue
wake/stop events introduced by commit c39add9b2423 ("virtio_net: Add TX
stopped and wake counters").
Previously, the driver only recorded partial wake/stop statistics
for TX queues. Some wake events triggered by 'skb_xmit_done()' or resume
operations were not counted, which made the per-queue metrics incomplete.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251120015320.1418-1-liming.wu@jaguarmicro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
tcp: provide better locality for retransmit timer
TCP stack uses three timers per flow, currently spread this way:
- sk->sk_timer : keepalive timer
- icsk->icsk_retransmit_timer : retransmit timer
- icsk->icsk_delack_timer : delayed ack timer
This series moves the retransmit timer to sk->sk_timer location,
to increase data locality in TX paths.
keepalive timers are not often used, this change should be neutral for them.
After the series we have following fields:
- sk->tcp_retransmit_timer : retransmit timer, in sock_write_tx group
- icsk->icsk_delack_timer : delayed ack timer
- icsk->icsk_keepalive_timer : keepalive timer
Moving icsk_delack_timer in a beter location would also be welcomed.
====================
Link: https://patch.msgid.link/20251124175013.1473655-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now sk->sk_timer is no longer used by TCP keepalive, we can use
its storage for TCP and MPTCP retransmit timers for better
cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_timer has been used for TCP keepalives.
Keepalive timers are not in fast path, we want to use sk->sk_timer
storage for retransmit timers, for better cache locality.
Create icsk->icsk_keepalive_timer and change keepalive
code to no longer use sk->sk_timer.
Added space is reclaimed in the following patch.
This includes changes to MPTCP, which was also using sk_timer.
Alias icsk->mptcp_tout_timer and icsk->icsk_keepalive_timer
for inet_sk_diag_fill() sake.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These two fields are mostly read in TCP tx path, move them
in an more appropriate group for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation of sk->tcp_timeout_timer introduction,
rename icsk_timeout() helper and change its argument to plain
'const struct sock *sk'.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the tagged commit, ice stopped respecting Rx buffer length
passed from VFs.
At that point, the buffer length was hardcoded in ice, so VFs still
worked up to some point (until, for example, a VF wanted an MTU
larger than its PF).
The next commit 93f53db9f9dc ("ice: switch to Page Pool"), broke
Rx on VFs completely since ice started accounting per-queue buffer
lengths again, but now VF queues always had their length zeroed, as
ice was already ignoring what iavf was passing to it.
Restore the line that initializes the buffer length on VF queues
basing on the virtchnl messages.
Fixes: 3a4f419f7509 ("ice: drop page splitting and recycling")
Reported-by: Jakub Slepecki <jakub.slepecki@intel.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Jakub Slepecki <jakub.slepecki@intel.com>
Link: https://patch.msgid.link/20251124170735.3077425-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c:163:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aSQocKoJGkN0wzEj@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Asbjørn Sloth Tønnesen says:
====================
tools: ynl-gen: regeneration comment + function prefix
It looks like these two patches are the last ones needed
for YNL, before the WireGuard patches can go in.
These patches was both requested by Jason, during review
of the WireGuard YNL conversion patchset[1].
====================
Link: https://patch.msgid.link/20251120174429.390574-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a comment on regeneration to the generated files.
The comment is placed after the YNL-GEN line[1], as to not interfere
with ynl-regen.sh's detection logic.
[1] and after the optional YNL-ARG line.
Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new CLI argument for overriding the default
function prefix, as used for naming the doit/dumpit functions
in the generated kernel code.
When not specified the default "$(FAMILY)-nl" is used.
This can also be specified persistently in generated files:
/* YNL-ARG --function-prefix wg */
In the above example it causes the following changes:
wireguard_nl_get_device_dumpit() -> wg_get_device_dumpit()
wireguard_nl_get_device_doit() -> wg_get_device_doit()
The variable name fn_prefix, was chosen as it relates to op_prefix
which is used to prefix the UAPI commands enum entries.
Link: https://lore.kernel.org/r/aRvWzC8qz3iXDAb3@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251120174429.390574-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andy Shevchenko says:
====================
ptp: ocp: A fix and refactoring
Here is the fix for incorrect use of %ptT with the associated
refactoring and additional cleanups.
Note, %ptS, which is introduced in another series that is already
applied to PRINTK tree, doesn't fit here, that's why this fix
is separated from that series.
====================
Link: https://patch.msgid.link/20251124084816.205035-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The META's PCI vendor ID is listed already in the pci_ids.h.
Reuse it here.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The while (i--) is a standard pattern for the cleaning up loops.
Apply this pattern where it makes sense in the driver.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's a common practice to make resource release functions be NULL-aware.
Make ptp_ocp_unregister_ext() NULL-aware.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor signal_show() to avoid sequential calls to sysfs_emit*()
and use the same pattern to get the index of a signal as it's done
in signal_store().
While at it, fix wrong use of %ptT against struct timespec64.
It's kinda lucky that it worked just because the first member
there 64-bit and it's of time64_t type. Now with %ptS it may
be used correctly.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a lockdep lock order inversion warning[1] due to
commit 687aa0c5581b ("vsock: Fix transport_* TOCTOU"). This was fixed in
commit f7c877e75352 ("vsock: fix lock inversion in
vsock_assign_transport()").
Redo syzkaller's repro by piggybacking on a somewhat related test
implemented in commit 3a764d93385c ("vsock/test: Add test for null ptr
deref when transport changes").
[1]: https://lore.kernel.org/netdev/68f6cdb0.a70a0220.205af.0039.GAE@google.com/
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251123-vsock_test-linger-lockdep-warn-v1-1-4b1edf9d8cdc@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let phydev->enable_tx_lpi control whether MAC enables TX LPI, instead of
enabling it unconditionally. This way TX LPI is disabled if e.g. link
partner doesn't support EEE. This helps to avoid potential issues like
link flaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/91bcb837-3fab-4b4e-b495-038df0932e44@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There have been reports that RTL8127 hangs on suspend and shutdown,
partially disappearing from lspci until power-cycling.
According to Realtek disabling PLL's when switching to D3 should be
avoided on that chip version. Fix this by aligning disabling PLL's
with the vendor drivers, what in addition results in PLL's not being
disabled when switching to D3hot on other chip versions.
Fixes: f24f7b2f3af9 ("r8169: add support for RTL8127A")
Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/d7faae7e-66bc-404a-a432-3a496600575f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PHY driver support for Maxlinear MxL86252 and MxL86282 switches.
The PHYs built-into those switches are just like any other GPY 2.5G PHYs
with the exception of the temperature sensor data being encoded in a
different way.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/a6cd7fe461b011cec2b59dffaf34e9c8b0819059.1763818120.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MxL86211C is a smaller and more efficient version of the GPY211C.
Add the PHY ID and phy_driver instance to the mxl-gpy driver.
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/cabf3559d6511bed6b8a925f540e3162efc20f6b.1763818120.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when skb is null, the driver prints an error and then
dereferences skb on the next line.
To fix this, let's add a 'break' after the error message to switch
to sxgbe_rx_refill(), which is similar to the approach taken by the
other drivers in this particular case, e.g. calxeda with xgmac_rx().
Found during a code review.
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251121123834.97748-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove redundant fwnode cleanup in of_mdiobus_register_device()
and xpcs_plat_init_dev().
mdio_device_free() eventually calls mdio_device_release(),
which already performs fwnode_handle_put(), making the manual
cleanup unnecessary.
Combine fwnode_handle_get() with device_set_node() in
of_mdiobus_register_device() for clarity.
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/00847693daa8f7c8ff5dfa19dd35fc712fa4e2b5.1763995734.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix all warnings reported by scripts/kernel-doc in
mdio_device.c and mdio_bus.c
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/7ef7b80669da2b899d38afdb6c45e122229c3d8c.1763968667.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wei Fang says:
====================
net: enetc: add port MDIO support for both i.MX94 and i.MX95
The NETC IP has one external master MDIO interface (eMDIO) for managing
external PHYs, all ENETC ports share this eMDIO. The EMDIO function and
the ENETC port MDIO are the virtual ports of this eMDIO, ENETC can use
these virtual ports to access their PHYs. The difference is that EMDIO
function is a 'global port', it can access all the PHYs on the eMDIO, so
it provides a means for different software modules to share a single set
of MDIO signals to access their PHYs.
The ENETC port MDIO can only access its own external PHY. Furthermore,
its PHY address must be set to its corresponding LaBCR register in IERB
module, which is is a 64 KB size page containing registers that are used
for pre-boot initialization for all NETC PCIe functions. And this IERB
is owned by the host OS and it will be locked after the initialization,
so it cannot be configured at running time any more. The port MDIO can
only work properly when the PHY address accessed by it matches the value
of its corresponding LaBCR[MDIO_PHYAD_PRTAD]. Otherwise, the MDIO access
by the port MDIO will not take effect.
Note that the same PHY is either controlled by port MDIO or by the EMDIO
function. The netc-blk-ctrl driver will only set the PHY address in the
LaBCR register corresponding to the ENETC when the ENETC node contains
an mdio child node, and the ENETC driver will only create the port MDIO
bus then. An example in DTS is as follows, the EMDIO function will not\
access this PHY.
enetc_port0 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-id";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
reg = <1>;
};
};
};
If users want to use EMDIO funtion to manage the PHY, they only need to
place the PHY node in the emdio node. The same PHY must not be placed
simultaneously within the ENETC node. An example in DTS to use EMDIO
is as below.
netc_emdio {
ethphy0: ethernet-phy@1 {
reg = <1>;
};
ethphy2: ethernet-phy@8 {
reg = <8>;
};
};
In the host OS, when there are multiple ENETCs, they can all access their
PHYs using their own port MDIO, or they can all access their PHYs using
the EMDIO function, or they can partially use port MDIO and partially use
the EMDIO function.
Another typical use case of port MDIO is the Jailhouse usage. An ENETC is
assigned to a guest OS. The EMDIO function will be unavailable in the
guest OS because EMDIO is controlled by the host OS. Therefore, the ENETC
can use its port MDIO to manage its external PHY in this situation. In
this use case, the host OS's root dtb will disable the ENETC node, so the
host OS's ENETC driver will not probe the ENETC and its PHY.
In addition, this series also adds the internal MDIO bus support, each
ENETC has an internal MDIO interface for managing on-die PHY (PCS) if it
has PCS layer.
====================
Link: https://patch.msgid.link/20251119102557.1041881-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each ENETC has a set of external MDIO registers to access its external
PHY based on its port EMDIO bus, these registers are used for MDIO bus
access, such as setting the PHY address, PHY register address and value,
read or write operations, C22 or C45 format, etc. The base address of
this set of registers has been modified in ENETC v4 and is different
from that in ENETC v1. So the base address needs to be updated so that
ENETC v4 can use port MDIO to manage its own external PHY.
Additionally, if ENETC has the PCS layer, it also has a set of internal
MDIO registers for managing its on-die PHY (PCS/Serdes). The base address
of this set of registers is also different from that of ENETC v1, so the
base address also needs to be updated so that ENETC v4 can support the
management of on-die PHY through the internal MDIO bus.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NETC IP has only one external master MDIO interface (eMDIO) for managing
the external PHYs. ENETC can use the interfaces provided by the EMDIO
function or its port MDIO to access and manage its external PHY. Both
the EMDIO function and the port MDIO are all virtual ports of the eMDIO.
The difference is that the EMDIO function is a 'global port', it can
access all the PHYs on the eMDIO, but port MDIO can only access its own
PHY. To ensure that ENETC can only access its own PHY through port MDIO,
LaBCR[MDIO_PHYAD_PRTAD] needs to be set, which represents the address of
the external PHY connected to ENETC. If the accessed PHY address is not
consistent with LaBCR[MDIO_PHYAD_PRTAD], then the MDIO access initiated
by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENETC supports managing its own external PHY through its port MDIO
functionality. To use this function, the PHY address needs be set in the
corresponding LaBCR register in the Integrated Endpoint Register Block
(IERB), which is used for pre-boot initialization of NETC PCIe functions.
The port MDIO can only work properly when the PHY address accessed by the
port MDIO matches the corresponding LaBCR[MDIO_PHYAD_PRTAD] value.
Because the ENETC driver only registers the MDIO bus (port MDIO bus) when
it detects an MDIO child node in its node, similarly, the netc-blk-ctrl
driver only resolves the PHY address and sets it in the corresponding
LaBCR when it detects an MDIO child node in the ENETC node.
Co-developed-by: Aziz Sellami <aziz.sellami@nxp.com>
Signed-off-by: Aziz Sellami <aziz.sellami@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Improvements over DSA conduit ethtool ops
DSA interceps 'ethtool -S eth0', where eth0 is the host port of the
switch (called 'conduit'). It does this because otherwise there is no
way to report port counters for the CPU port, which is a MAC like any
other of that switch, except Linux exposes no net_device for it, thus no
ethtool hook.
Having understood all downsides of this debugging interface, when we
need it we needed, so the proposed changes here are to make it more
useful by dumping more counters in it: not just the switch CPU port,
but all other switch ports in the tree which lack a net_device. Not
reinventing any wheel, just putting more output in an existing command.
That is patch 3/3. The other 2 are cleanup.
====================
Link: https://patch.msgid.link/20251122112311.138784-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there is no way to see packet counters on cascade ports, and
no clarity on how the API for that would look like.
Because it's something that is currently needed, just extend the hack
where ethtool -S on the conduit interface dumps CPU port counters, and
also use it to dump counters of cascade ports.
Note that the "pXX_" naming convention changes to "sXX_pYY", to
distinguish between ports having the same index but belonging to
different switches. This has a slight chance of causing regressions to
existing tooling:
- grepping for "p04_counter_name" still works, but might return more
than one string now
- grepping for " p04_counter_name" no longer works
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251122112311.138784-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Suppress some checkpatch 'CHECK' messages about u8 being preferable over
uint8_t, etc. No functional change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251122112311.138784-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In theory this would have been seen by now, but it seems that all
drivers used as DSA conduit interfaces thus far have had ethtool_ops
set, and it's hard to even find modern Ethernet drivers (and not VF
ones) which don't use ethtool.
Here is the unfiltered list of drivers which register any sort of
net_device but don't set its ethtool_ops pointer. I don't think any of
them 'risks' being used as a DSA conduit, maybe except for moxart,
rnpbge and icssm, I'm not sure.
- drivers/net/can/dev/dev.c
- drivers/net/wwan/qcom_bam_dmux.c
- drivers/net/wwan/t7xx/t7xx_netdev.c
- drivers/net/arcnet/arcnet.c
- drivers/net/hamradio/
- drivers/net/slip/slip.c
- drivers/net/ethernet/ezchip/nps_enet.c
- drivers/net/ethernet/moxa/moxart_ether.c
- drivers/net/ethernet/wangxun/txgbevf/txgbevf_main.c
- drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c
- drivers/net/ethernet/huawei/hinic3/hinic3_main.c
- drivers/net/ethernet/i825xx/
- drivers/net/ethernet/ti/icssm/icssm_prueth.c
- drivers/net/ethernet/seeq/
- drivers/net/ethernet/litex/litex_liteeth.c
- drivers/net/ethernet/sunplus/spl2sw_driver.c
- drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
- drivers/net/ipa/
- drivers/net/wireless/microchip/wilc1000/
- drivers/net/wireless/mediatek/mt76/dma.c
- drivers/net/wireless/ath/ath12k/
- drivers/net/wireless/ath/ath11k/
- drivers/net/wireless/ath/ath6kl/
- drivers/net/wireless/ath/ath10k/
- drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans.c
- drivers/net/wireless/virtual/mac80211_hwsim.c
- drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c
- drivers/net/wireless/realtek/rtw89/core.c
- drivers/net/wireless/realtek/rtw88/pci.c
- drivers/net/caif/
- drivers/net/plip/
- drivers/net/wan/
- drivers/net/mctp/
- drivers/net/ppp/
- drivers/net/thunderbolt/
Nonetheless, it's good for the framework not to make such assumptions,
and not panic when coming across such kind of host device in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251122112311.138784-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Attempting to add a port device that is already up will expectedly fail,
but not before modifying the team device header_ops.
In the case of the syzbot reproducer the gre0 device is
already in state UP when it attempts to add it as a
port device of team0, this fails but before that
header_ops->create of team0 is changed from eth_header to ipgre_header
in the call to team_dev_type_check_change.
Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense
as the private data of the device still holds a struct team.
Example sequence of iproute2 commands to reproduce the hang/BUG():
ip link add dev team0 type team
ip link add dev gre0 type gre
ip link set dev gre0 up
ip link set dev gre0 master team0
ip link set dev team0 up
ping -I team0 1.1.1.1
Move team_dev_type_check_change down where all other checks have passed
as it changes the dev type with no way to restore it in case
one of the checks that follow it fail.
Also make sure to preserve the origial mtu assignment:
- If port_dev is not the same type as dev, dev takes mtu from port_dev
- If port_dev is the same type as dev, port_dev takes mtu from dev
This is done by adding a conditional before the call to dev_set_mtu
to prevent it from assigning port_dev->mtu = dev->mtu and instead
letting team_dev_type_check_change assign dev->mtu = port_dev->mtu.
The conditional is needed because the patch moves the call to
team_dev_type_check_change past dev_set_mtu.
Testing:
- team device driver in-tree selftests
- Add/remove various devices as slaves of team device
- syzbot
Reported-by: syzbot+a2a3b519de727b0f7903@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a2a3b519de727b0f7903
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251122002027.695151-1-zlatistiv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/chelsio/cxgb4/sched.h declares a sched_class
struct which has a type name clash with struct sched_class
in kernel/sched/sched.h (a type used in a field in task_struct).
When cxgb4 is a builtin we end up with both sched_class types,
and as a result of this we wind up with DWARF (and derived from
that BTF) with a duplicate incorrect task_struct representation.
When cxgb4 is built-in this type clash can cause kernel builds to
fail as resolve_btfids will fail when confused which task_struct
to use. See [1] for more details.
As such, renaming sched_class to ch_sched_class (in line with
other structs like ch_sched_flowc) makes sense.
[1] https://lore.kernel.org/bpf/2412725b-916c-47bd-91c3-c2d57e3e6c7b@acm.org/
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20251121181231.64337-1-alan.maguire@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support for chip RTL9151A. Its XID is 0x68b. It is bascially
basd on the one with XID 0x688, but with different firmware file.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251121090104.3753-1-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rate limiting validation condition currently checks the output
variable max_bw_value[i] instead of the input value
maxrate->tc_maxrate[i]. This causes the validation to compare an
uninitialized or stale value rather than the actual requested rate.
The condition should check the input rate to properly validate against
the upper limit:
} else if (maxrate->tc_maxrate[i] <= upper_limit_gbps) {
This aligns with the pattern used in the first branch, which correctly
checks maxrate->tc_maxrate[i] against upper_limit_mbps.
The current implementation can lead to unreliable validation behavior:
- For rates between 25.5 Gbps and 255 Gbps, if max_bw_value[i] is 0
from initialization, the GBPS path may be taken regardless of whether
the actual rate is within bounds
- When processing multiple TCs (i > 0), max_bw_value[i] contains the
value computed for the previous TC, affecting the validation logic
- The overflow check for rates exceeding 255 Gbps may not trigger
consistently depending on previous array values
This patch ensures the validation correctly examines the requested rate
value for proper bounds checking.
Fixes: 43b27d1bd88a ("net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps")
Signed-off-by: Danielle Costantino <dcostantino@meta.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251124180043.2314428-1-dcostantino@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When having a multiuser mount with domain= specified and using
cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,
so it needs to be freed before leaving cifs_construct_tcon().
This fixes the following memory leak reported by kmemleak:
mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,...
su - testuser
cifscreds add -d ZELDA -u testuser
...
ls /mnt/1
...
umount /mnt
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8881203c3f08 (size 8):
comm "ls", pid 5060, jiffies 4307222943
hex dump (first 8 bytes):
5a 45 4c 44 41 00 cc cc ZELDA...
backtrace (crc d109a8cf):
__kmalloc_node_track_caller_noprof+0x572/0x710
kstrdup+0x3a/0x70
cifs_sb_tlink+0x1209/0x1770 [cifs]
cifs_get_fattr+0xe1/0xf50 [cifs]
cifs_get_inode_info+0xb5/0x240 [cifs]
cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs]
cifs_getattr+0x28e/0x450 [cifs]
vfs_getattr_nosec+0x126/0x180
vfs_statx+0xf6/0x220
do_statx+0xab/0x110
__x64_sys_statx+0xd5/0x130
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f2aee329a68f ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Kumar Kartikeya Dwivedi says:
====================
General enhancements to rqspinlock stress test
Three enchancements, details in commit messages.
First, the CPU requirements are 2 for AA, 3 for ABBA, and 4 for ABBCCA,
hence relax the check during module initialization. Second, add a
per-CPU histogram to capture lock acquisition times to record which
buckets these acquisitions fall into for the normal task context and NMI
context. Anything below 10ms is not printed in detail, but above that
displays the full breakdown for each context. Finally, make the delay of
the NMI and task contexts configurable, set to 10 and 20 ms respectively
by default.
====================
Link: https://patch.msgid.link/20251125020749.2421610-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
