| Age | Commit message (Collapse) | Author |
|---|
|
Breno Leitao says:
====================
net: freescale: migrate to .get_rx_ring_count() ethtool callback
This series migrates Freescale network drivers to use the new .get_rx_ring_count()
ethtool callback introduced in commit 84eaf4359c36 ("net: ethtool: add
get_rx_ring_count callback to optimize RX ring queries").
The new callback simplifies the .get_rxnfc() implementation by removing
ETHTOOL_GRXRINGS handling and moving it to a dedicated callback. This provides
a cleaner separation of concerns and aligns these drivers with the modern
ethtool API.
The series updates the following Freescale drivers:
- enetc
- dppa2
- gianfar
====================
Link: https://patch.msgid.link/20251128-gxring_freescale-v1-0-22a978abf29e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the enetc driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc for handling
ETHTOOL_GRXRINGS command. This simplifies the code in two ways:
1. For enetc_get_rxnfc(): Remove the ETHTOOL_GRXRINGS case from the
switch statement while keeping other cases for classifier rules.
2. For enetc4_get_rxnfc(): Remove it completely and use
enetc_get_rxnfc() instead.
Now on, enetc_get_rx_ring_count() is the callback that returns the
number of RX rings for enetc driver.
Also, remove the documentation around enetc4_get_rxnfc(), which was not
matching what the function did(?!).
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251128-gxring_freescale-v1-3-22a978abf29e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the dpaa2 driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
ETHTOOL_GRXRINGS case from the switch statement and replacing it with
a direct return of the queue count.
The driver still maintains .get_rxnfc for other commands including
ETHTOOL_GRXCLSRLCNT, ETHTOOL_GRXCLSRULE, and ETHTOOL_GRXCLSRLALL.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251128-gxring_freescale-v1-2-22a978abf29e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the gianfar driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
ETHTOOL_GRXRINGS case from the switch statement and replacing it with
a direct return of the queue count.
The driver still maintains .get_rxnfc for other commands including
ETHTOOL_GRXCLSRLCNT, ETHTOOL_GRXCLSRULE, and ETHTOOL_GRXCLSRLALL.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251128-gxring_freescale-v1-1-22a978abf29e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20251128173802.318520-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow manual PWM control on Dell G5 5505 (and SE).
Signed-off-by: Gabriel Marcano <gabemarcano@yahoo.com>
Link: https://lore.kernel.org/r/20251128191650.6191-1-gabemarcano@yahoo.com
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull folio updates from Christian Brauner:
"Add a new folio_next_pos() helper function that returns the file
position of the first byte after the current folio. This is a common
operation in filesystems when needing to know the end of the current
folio.
The helper is lifted from btrfs which already had its own version, and
is now used across multiple filesystems and subsystems:
- btrfs
- buffer
- ext4
- f2fs
- gfs2
- iomap
- netfs
- xfs
- mm
This fixes a long-standing bug in ocfs2 on 32-bit systems with files
larger than 2GiB. Presumably this is not a common configuration, but
the fix is backported anyway. The other filesystems did not have bugs,
they were just mildly inefficient.
This also introduce uoff_t as the unsigned version of loff_t. A recent
commit inadvertently changed a comparison from being unsigned (on
64-bit systems) to being signed (which it had always been on 32-bit
systems), leading to sporadic fstests failures.
Generally file sizes are restricted to being a signed integer, but in
places where -1 is passed to indicate "up to the end of the file", it
is convenient to have an unsigned type to ensure comparisons are
always unsigned regardless of architecture"
* tag 'vfs-6.19-rc1.folio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Add uoff_t
mm: Use folio_next_pos()
xfs: Use folio_next_pos()
netfs: Use folio_next_pos()
iomap: Use folio_next_pos()
gfs2: Use folio_next_pos()
f2fs: Use folio_next_pos()
ext4: Use folio_next_pos()
buffer: Use folio_next_pos()
btrfs: Use folio_next_pos()
filemap: Add folio_next_pos()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfd and coredump updates from Christian Brauner:
"Features:
- Expose coredump signal via pidfd
Expose the signal that caused the coredump through the pidfd
interface. The recent changes to rework coredump handling to rely
on unix sockets are in the process of being used in systemd. The
previous systemd coredump container interface requires the coredump
file descriptor and basic information including the signal number
to be sent to the container. This means the signal number needs to
be available before sending the coredump to the container.
- Add supported_mask field to pidfd
Add a new supported_mask field to struct pidfd_info that indicates
which information fields are supported by the running kernel. This
allows userspace to detect feature availability without relying on
error codes or kernel version checks.
Cleanups:
- Drop struct pidfs_exit_info and prepare to drop exit_info pointer,
simplifying the internal publication mechanism for exit and
coredump information retrievable via the pidfd ioctl
- Use guard() for task_lock in pidfs
- Reduce wait_pidfd lock scope
- Add missing PIDFD_INFO_SIZE_VER1 constant
- Add missing BUILD_BUG_ON() assert on struct pidfd_info
Fixes:
- Fix PIDFD_INFO_COREDUMP handling
Selftests:
- Split out coredump socket tests and common helpers into separate
files for better organization
- Fix userspace coredump client detection issues
- Handle edge-triggered epoll correctly
- Ignore ENOSPC errors in tests
- Add debug logging to coredump socket tests, socket protocol tests,
and test helpers
- Add tests for PIDFD_INFO_COREDUMP_SIGNAL
- Add tests for supported_mask field
- Update pidfd header for selftests"
* tag 'vfs-6.19-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
pidfs: reduce wait_pidfd lock scope
selftests/coredump: add second PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: add first PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: ignore ENOSPC errors
selftests/coredump: add debug logging to coredump socket protocol tests
selftests/coredump: add debug logging to coredump socket tests
selftests/coredump: add debug logging to test helpers
selftests/coredump: handle edge-triggered epoll correctly
selftests/coredump: fix userspace coredump client detection
selftests/coredump: fix userspace client detection
selftests/coredump: split out coredump socket tests
selftests/coredump: split out common helpers
selftests/pidfd: add second supported_mask test
selftests/pidfd: add first supported_mask test
selftests/pidfd: update pidfd header
pidfs: expose coredump signal
pidfs: drop struct pidfs_exit_info
pidfs: prepare to drop exit_info pointer
pidfd: add a new supported_mask field
pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info
...
|
|
Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which sets the exec
queue default state to user data passed in. The intent is for a Mesa
tool to use this replay GPU hangs.
v2:
- Enable the flag DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE
- Fix the page size math calculation to avoid a crash
v4:
- Use vmemdup_user (Maarten)
- Copy default state first into LRC, then replay state (Testing, Carlos)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-10-matthew.brost@intel.com
|
|
Add replay_offset and replay_length lines to LRC HWCTX snapshot with the
idea being this information can be used extract the data which needs to
be pass to exec queue extension DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE
so GPU hang can be replayed via a Mesa tool.
The additional lines look like:
[HWCTX].replay_offset: 0x%x
[HWCTX].replay_length: 0x%x
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-9-matthew.brost@intel.com
|
|
Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which accepts a user pointer
to populate the exec queue state so that a GPU hang can be replayed via
a Mesa tool.
v2: Update the value for HANG_REPLAY_STATE flag
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Carlos Santa <carlos.santa@intel-corp-partner.google.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-8-matthew.brost@intel.com
|
|
Add VM.uapi_flags to VM snapshot capture VM snapshot capture. This is
useful information for debug and will help build a robust GPU hang
replay tool.
The current format is:
VM.uapi_flags: 0x%x
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-7-matthew.brost@intel.com
|
|
Add CPU caching to properties line in VM snapshot capture indicating
the BO caching properites. This is useful information for debug and
will help build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>|mem_region=0x%x|pat_index=%d|cpu_caching=%d
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Memory region is a bit mask of where the memory is located.
Pat index corresponds to the value setup upon VM bind.
CPU caching corresponds to the value of BO setup upon creation.
v2:
- Save off cpu_caching value rather than looking at BO (Carlos)
v4:
- Fix NULL ptr dereference (Carlos)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-6-matthew.brost@intel.com
|
|
Add pat index to properties line in VM snapshot capture indicating
the VMA caching properites. This is useful information for debug and
will help build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>|mem_region=0x%x|pat_index=%d
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Memory region is a bit mask of where the memory is located.
Pat index corresponds to the value setup upon VM bind.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-5-matthew.brost@intel.com
|
|
Add memory region to properties line in VM snapshot capture indicating
where the memory is located. The memory region corresponds to regions in
the uAPI. This is useful information for debug and will help build a
robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>|mem_region=0x%x
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Memory region is a bit mask of where the memory is located.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-4-matthew.brost@intel.com
|
|
Add "null_sparse" type to VM snap properties indicating the VMA reads
zero and writes are droppped. This is useful information for debug and
will help build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-3-matthew.brost@intel.com
|
|
Add properties line to VM snapshot capture which includes additional
information about VMA being dumped. This is helpful for debug purposes
but also to build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>
Permissions has two options, either "read_only" or "read_write".
Type has two options, either "userptr" or "bo".
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-2-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
|
|
Add support for the CSW MNE007QB3-1, pleace the EDID here for
subsequent reference.
00 ff ff ff ff ff ff 00 0e 77 7c 14 00 00 00 00
00 23 01 04 a5 1e 13 78 07 ee 95 a3 54 4c 99 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 35 3c 80 a0 70 b0 23 40 30 20
36 00 2d bc 10 00 00 18 2b 30 80 a0 70 b0 23 40
30 20 36 00 2d bc 10 00 00 18 00 00 00 fd 00 28
3c 4a 4a 0f 01 0a 20 20 20 20 20 20 00 00 00 fc
00 4d 4e 45 30 30 37 51 42 33 2d 31 0a 20 01 5b
70 20 79 02 00 21 00 1d c8 0b 5d 07 80 07 b0 04
00 3d 8a 54 cd a4 99 66 62 0f 02 45 54 40 5e 40
5e 00 44 12 78 2e 00 06 00 44 40 5e 40 5e 81 00
20 74 1a 00 00 03 01 28 3c 00 00 00 00 00 00 3c
00 00 00 00 8d 00 e3 05 04 00 e6 06 01 00 60 60
ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 68 90
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251127121601.1608379-1-yelangyan@huaqin.corp-partner.google.com
|
|
Wa_14020316580 was getting clobbered by power gating init code
later in the driver load sequence. Move the Wa so that
it applies correctly.
Fixes: 7cd05ef89c9d ("drm/xe/xe2hpm: Add initial set of workarounds")
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251129052548.70766-1-vinay.belgaumkar@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull writeback updates from Christian Brauner:
"Features:
- Allow file systems to increase the minimum writeback chunk size.
The relatively low minimal writeback size of 4MiB means that
written back inodes on rotational media are switched a lot. Besides
introducing additional seeks, this also can lead to extreme file
fragmentation on zoned devices when a lot of files are cached
relative to the available writeback bandwidth.
This adds a superblock field that allows the file system to
override the default size, and sets it to the zone size for zoned
XFS.
- Add logging for slow writeback when it exceeds
sysctl_hung_task_timeout_secs. This helps identify tasks waiting
for a long time and pinpoint potential issues. Recording the
starting jiffies is also useful when debugging a crashed vmcore.
- Wake up waiting tasks when finishing the writeback of a chunk
Cleanups:
- filemap_* writeback interface cleanups.
Adding filemap_fdatawrite_wbc ended up being a mistake, as all but
the original btrfs caller should be using better high level
interfaces instead.
This series removes all these low-level interfaces, switches btrfs
to a more specific interface, and cleans up other too low-level
interfaces. With this the writeback_control that is passed to the
writeback code is only initialized in three places.
- Remove __filemap_fdatawrite, __filemap_fdatawrite_range, and
filemap_fdatawrite_wbc
- Add filemap_flush_nr helper for btrfs
- Push struct writeback_control into start_delalloc_inodes in btrfs
- Rename filemap_fdatawrite_range_kick to filemap_flush_range
- Stop opencoding filemap_fdatawrite_range in 9p, ocfs2, and mm
- Make wbc_to_tag() inline and use it in fs"
* tag 'vfs-6.19-rc1.writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Make wbc_to_tag() inline and use it in fs.
xfs: set s_min_writeback_pages for zoned file systems
writeback: allow the file system to override MIN_WRITEBACK_PAGES
writeback: cleanup writeback_chunk_size
mm: rename filemap_fdatawrite_range_kick to filemap_flush_range
mm: remove __filemap_fdatawrite_range
mm: remove filemap_fdatawrite_wbc
mm: remove __filemap_fdatawrite
mm,btrfs: add a filemap_flush_nr helper
btrfs: push struct writeback_control into start_delalloc_inodes
btrfs: use the local tmp_inode variable in start_delalloc_inodes
ocfs2: don't opencode filemap_fdatawrite_range in ocfs2_journal_submit_inode_data_buffers
9p: don't opencode filemap_fdatawrite_range in v9fs_mmap_vm_close
mm: don't opencode filemap_fdatawrite_range in filemap_invalidate_inode
writeback: Add logging for slow writeback (exceeds sysctl_hung_task_timeout_secs)
writeback: Wake up waiting tasks when finishing the writeback of a chunk.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
|
|
Add WARN_ON_ONCE checks in nvmet_subsys_free() to ensure that the
ctrls and hosts lists are all empty during subsystem release. This helps
catch resource leaks.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Ensure gt->freq is released when sysfs_create_files() fails
in xe_gt_freq_init(). Without this, the kobject would leak.
Add kobject_put() before returning the error.
Fixes: fdc81c43f0c1 ("drm/xe: use devm_add_action_or_reset() helper")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Alex Zuo <alex.zuo@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20251114205638.2184529-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"FUSE iomap Support for Buffered Reads:
This adds iomap support for FUSE buffered reads and readahead. This
enables granular uptodate tracking with large folios so only
non-uptodate portions need to be read. Also fixes a race condition
with large folios + writeback cache that could cause data corruption
on partial writes followed by reads.
- Refactored iomap read/readahead bio logic into helpers
- Added caller-provided callbacks for read operations
- Moved buffered IO bio logic into new file
- FUSE now uses iomap for read_folio and readahead
Zero Range Folio Batch Support:
Add folio batch support for iomap_zero_range() to handle dirty
folios over unwritten mappings. Fix raciness issues where dirty data
could be lost during zero range operations.
- filemap_get_folios_tag_range() helper for dirty folio lookup
- Optional zero range dirty folio processing
- XFS fills dirty folios on zero range of unwritten mappings
- Removed old partial EOF zeroing optimization
DIO Write Completions from Interrupt Context:
Restore pre-iomap behavior where pure overwrite completions run
inline rather than being deferred to workqueue. Reduces context
switches for high-performance workloads like ScyllaDB.
- Removed unused IOCB_DIO_CALLER_COMP code
- Error completions always run in user context (fixes zonefs)
- Reworked REQ_FUA selection logic
- Inverted IOMAP_DIO_INLINE_COMP to IOMAP_DIO_OFFLOAD_COMP
Buffered IO Cleanups:
Some performance and code clarity improvements:
- Replace manual bitmap scanning with find_next_bit()
- Simplify read skip logic for writes
- Optimize pending async writeback accounting
- Better variable naming
- Documentation for iomap_finish_folio_write() requirements
Misaligned Vectors for Zoned XFS:
Enables sub-block aligned vectors in XFS always-COW mode for zoned
devices via new IOMAP_DIO_FSBLOCK_ALIGNED flag.
Bug Fixes:
- Allocate s_dio_done_wq for async reads (fixes syzbot report after
error completion changes)
- Fix iomap_read_end() for already uptodate folios (regression fix)"
* tag 'vfs-6.19-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (40 commits)
iomap: allocate s_dio_done_wq for async reads as well
iomap: fix iomap_read_end() for already uptodate folios
iomap: invert the polarity of IOMAP_DIO_INLINE_COMP
iomap: support write completions from interrupt context
iomap: rework REQ_FUA selection
iomap: always run error completions in user context
fs, iomap: remove IOCB_DIO_CALLER_COMP
iomap: use find_next_bit() for uptodate bitmap scanning
iomap: use find_next_bit() for dirty bitmap scanning
iomap: simplify when reads can be skipped for writes
iomap: simplify ->read_folio_range() error handling for reads
iomap: optimize pending async writeback accounting
docs: document iomap writeback's iomap_finish_folio_write() requirement
iomap: account for unaligned end offsets when truncating read range
iomap: rename bytes_pending/bytes_accounted to bytes_submitted/bytes_not_submitted
xfs: support sub-block aligned vectors in always COW mode
iomap: add IOMAP_DIO_FSBLOCK_ALIGNED flag
xfs: error tag to force zeroing on debug kernels
iomap: remove old partial eof zeroing optimization
xfs: fill dirty folios on zero range of unwritten mappings
...
|
|
Applied Wa_16028005424 to Graphics version from 30.00 to 30.05
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251121100822.20076-2-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Fix smatch reported inconsistent indenting warning in rawmidi.
sound/core/rawmidi.c:2115 alsa_rawmidi_init() warn: inconsistent
indenting.
No functional changes were introduced.
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251201151137.29536-4-hariconscious@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull remaining 6.18-devel changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This document details the NFSD IO modes that are configurable using
NFSD's experimental debugfs interfaces:
/sys/kernel/debug/nfsd/io_cache_read
/sys/kernel/debug/nfsd/io_cache_write
This document will evolve as NFSD's interfaces do (e.g. if/when NFSD's
debugfs interfaces are replaced with per-export controls).
Future updates will provide more specific guidance and howto
information to help others use and evaluate NFSD's IO modes:
BUFFERED, DONTCACHE and DIRECT.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When NFSD_IO_DIRECT is selected via the
/sys/kernel/debug/nfsd/io_cache_write experimental tunable, split
incoming unaligned NFS WRITE requests into a prefix, middle and
suffix segment, as needed. The middle segment is now DIO-aligned and
the prefix and/or suffix are unaligned. Synchronous buffered IO is
used for the unaligned segments, and IOCB_DIRECT is used for the
middle DIO-aligned extent.
Although IOCB_DIRECT avoids the use of the page cache, by itself it
doesn't guarantee data durability. For UNSTABLE WRITE requests,
durability is obtained by a subsequent NFS COMMIT request.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Co-developed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Mike noted that when NFSD responds to an NFS_FILE_SYNC WRITE, it
does not also persist file time stamps. To wit, Section 18.32.3
of RFC 8881 mandates:
> The client specifies with the stable parameter the method of how
> the data is to be processed by the server. If stable is
> FILE_SYNC4, the server MUST commit the data written plus all file
> system metadata to stable storage before returning results. This
> corresponds to the NFSv2 protocol semantics. Any other behavior
> constitutes a protocol violation. If stable is DATA_SYNC4, then
> the server MUST commit all of the data to stable storage and
> enough of the metadata to retrieve the data before returning.
Commit 3f3503adb332 ("NFSD: Use vfs_iocb_iter_write()") replaced:
- flags |= RWF_SYNC;
with:
+ kiocb.ki_flags |= IOCB_DSYNC;
which appears to be correct given:
if (flags & RWF_SYNC)
kiocb_flags |= IOCB_DSYNC;
in kiocb_set_rw_flags(). However the author of that commit did not
appreciate that the previous line in kiocb_set_rw_flags() results
in IOCB_SYNC also being set:
kiocb_flags |= (__force int) (flags & RWF_SUPPORTED);
RWF_SUPPORTED contains RWF_SYNC, and RWF_SYNC is the same bit as
IOCB_SYNC. Reviewers at the time did not catch the omission.
Reported-by: Mike Snitzer <snitzer@kernel.org>
Closes: https://lore.kernel.org/linux-nfs/20251018005431.3403-1-cel@kernel.org/T/#t
Fixes: 3f3503adb332 ("NFSD: Use vfs_iocb_iter_write()")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Fix all kernel-doc warnings in rnbd-proto.h:
- use correct enum name in kdoc comment
- mark several struct members as "/* private: */" so that no kdoc is
required for them
- don't use "/**" for a non-kernel-doc comment
- use the correct struct member name for "dev_name"
- use " *" for a blank kernel-doc line
Fixes these warnings:
Warning: drivers/block/rnbd/rnbd-proto.h:41 expecting prototype for
enum rnbd_msg_types. Prototype was for enum rnbd_msg_type instead
Warning: drivers/block/rnbd/rnbd-proto.h:50 struct member '__padding'
not described in 'rnbd_msg_hdr'
Warning: drivers/block/rnbd/rnbd-proto.h:53 This comment starts with
'/**', but isn't a kernel-doc comment.
* We allow to map RO many times and RW only once. We allow to map yet another
Warning: drivers/block/rnbd/rnbd-proto.h:81 struct member 'reserved'
not described in 'rnbd_msg_sess_info'
Warning: drivers/block/rnbd/rnbd-proto.h:92 struct member 'reserved'
not described in 'rnbd_msg_sess_info_rsp'
Warning: drivers/block/rnbd/rnbd-proto.h:107 struct member 'resv1'
not described in 'rnbd_msg_open'
Warning: drivers/block/rnbd/rnbd-proto.h:107 struct member 'dev_name'
not described in 'rnbd_msg_open'
Warning: drivers/block/rnbd/rnbd-proto.h:107 struct member 'reserved'
not described in 'rnbd_msg_open'
Warning: drivers/block/rnbd/rnbd-proto.h:158 struct member 'reserved'
not described in 'rnbd_msg_open_rsp'
Warning: drivers/block/rnbd/rnbd-proto.h:189 bad line:
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some caller of blk_mq_map_queue_type now didn't grab
'q_usage_counter', such as blk_mq_cpu_mapped_to_hctx, so we need
protect 'queue_hw_ctx' through rcu.
Also checked all other functions, no more missed cases.
Fixes: 89e1fb7ceffd ("blk-mq: fix potential uaf for 'queue_hw_ctx'")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the now deprecated kmap_atomic() with kmap_local_page().
The memcpy does not need atomic semantics, and the removed comment
is now stale - this patch now makes it in sync again. Last but not
least, highmem is going to be removed[0].
Link: https://lore.kernel.org/all/4ff89b72-03ff-4447-9d21-dd6a5fe1550f@app.fastmail.com/ [0]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
Drop the display dependency on intel_wakeref.h header. The contract in
the parent interface is that -ENOENT means there's no tracking. It
doesn't actually require us to use a shared macro for it. Duplicate the
macro in the few places that need this instead of inlining, primarily
for documentation reasons.
This allows us to remove the xe compat intel_wakeref.h header.
v2: Define INTEL_WAKEREF_DEF in intel_display_power.h
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/3599d0ec168d7ce7030582706acba66b616ab9f3.1764076995.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Under the hood, intel_wakeref_t is just struct ref_tracker *. Use the
actual underlying type both for clarity (we *are* using intel_wakeref_t
as a pointer though it doesn't look like one) and to help i915, xe and
display coexistence without custom types.
v2: Keep intel_wakeref.h includes as they are
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/f182bd26d5f9a00e843246d4aac8b25ff7531c51.1764076995.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add another level of macro abstraction, and declare the wakeref within
the for loop using __UNIQUE_ID. This allows us to drop a bunch of
boilerplate declarations and parameter passing.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/d568d5a1a0dc0ad81697010a29fb4a3f552af827.1764076995.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Under the hood, intel_wakeref_t is just struct ref_tracker *. Use the
actual underlying type both for clarity (we *are* using intel_wakeref_t
as a pointer though it doesn't look like one) and to help i915, xe and
display coexistence without custom types.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/e7afaea1a609485f91669a7d3c5d3fde0e0dbf8b.1764076995.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add another level of macro abstraction, and declare the wakeref within
the for loop using __UNIQUE_ID. This allows us to drop a bunch of
boilerplate declarations and parameter passing.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/f45a77708108dc4b606d732c1b011aa08fab72b5.1764076995.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
interrupt-controller requirement
Since commit 88bbe85dcd37 ("irqchip: bcm2836: Move SMP startup code to
arch/arm (v2)") the bcm2836-l1-intc block on bcm2711 is only used as a
base address for the smp_boot_secondary hook on 32 bit kernels. It is
not used as an interrupt controller.
Drop the binding requirement for interrupt-controller and interrupt-cells
to satisfy validation on this platform.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-3-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Commit 6cfcbe548a3a ("dt-bindings: display: Add BCM2712 HVS bindings")
added the compatible string for BCM2712, but missed out that
the number of interrupts and clocks changed too.
The driver commit 7687a12153d3 ("drm/vc4: hvs: Add support for BCM2712
HVS") also requires that both interrupts and clocks are named, so the
relevant -names properties are also added to "required" for BCM2712.
Update to validate clock, interrupts, and their names for the BCM2712
variant. (There should be no change in the binding requirements for
the other variants).
Fixes: 6cfcbe548a3a ("dt-bindings: display: Add BCM2712 HVS bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-2-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Commit 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
added the compatible strings for BCM2712, but missed out that the
number of interrupts changed with the "wakeup" interrupt not present in
the BCM7212.
Update the schema to correct the interrupt requirements for BCM2712.
(Requirements for BCM2711 should be unchanged).
Fixes: 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-1-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
