| Age | Commit message (Collapse) | Author |
|---|
|
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common allocator
(Dan Williams)
* pci/enumeration:
PCI: vmd: Switch to pci_bus_find_emul_domain_nr()
PCI: Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- mempool_alloc_bulk() support for upcoming users in the block layer
that need to allocate multiple objects at once with the mempool's
guaranteed progress semantics, which is not achievable with an
allocation single objects in a loop. Along with refactoring and
various improvements (Christoph Hellwig)
- Preparations for the upcoming separation of struct slab from struct
page, mostly by removing the struct folio layer, as the purpose of
struct folio has shifted since it became used in slab code (Matthew
Wilcox)
- Modernisation of slab's boot param API usage, which removes some
unexpected parsing corner cases (Petr Tesarik)
- Refactoring of freelist_aba_t (now struct freelist_counters) and
associated functions for double cmpxchg, enabled by -fms-extensions
(Vlastimil Babka)
- Cleanups and improvements related to sheaves caching layer, that were
part of the full conversion to sheaves, which is planned for the next
release (Vlastimil Babka)
* tag 'slab-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (42 commits)
slab: Remove unnecessary call to compound_head() in alloc_from_pcs()
mempool: clarify behavior of mempool_alloc_preallocated()
mempool: drop the file name in the top of file comment
mempool: de-typedef
mempool: remove mempool_{init,create}_kvmalloc_pool
mempool: legitimize the io_schedule_timeout in mempool_alloc_from_pool
mempool: add mempool_{alloc,free}_bulk
mempool: factor out a mempool_alloc_from_pool helper
slab: Remove references to folios from virt_to_slab()
kasan: Remove references to folio in __kasan_mempool_poison_object()
memcg: Convert mem_cgroup_from_obj_folio() to mem_cgroup_from_obj_slab()
mempool: factor out a mempool_adjust_gfp helper
mempool: add error injection support
mempool: improve kerneldoc comments
mm: improve kerneldoc comments for __alloc_pages_bulk
fault-inject: make enum fault_flags available unconditionally
usercopy: Remove folio references from check_heap_object()
slab: Remove folio references from kfree_nolock()
slab: Remove folio references from kfree_rcu_sheaf()
slab: Remove folio references from build_detached_freelist()
...
|
|
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE udates from Fan Wu:
"The primary change is the addition of support for the AT_EXECVE_CHECK
flag. This allows interpreters to signal the kernel to perform IPE
security checks on script files before execution, extending IPE
enforcement to indirectly executed scripts.
Update documentation for it, and also fix a comment"
* tag 'ipe-pr-20251202' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: Update documentation for script enforcement
ipe: Add AT_EXECVE_CHECK support for script enforcement
ipe: Drop a duplicated CONFIG_ prefix in the ifdeffery
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Bug fixes:
- defer credentials checking from the bprm_check_security hook to the
bprm_creds_from_file security hook
- properly ignore IMA policy rules based on undefined SELinux labels
IMA policy rule extensions:
- extend IMA to limit including file hashes in the audit logs
(dont_audit action)
- define a new filesystem subtype policy option (fs_subtype)
Misc:
- extend IMA to support in-kernel module decompression by deferring
the IMA signature verification in kernel_read_file() to after the
kernel module is decompressed"
* tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Handle error code returned by ima_filter_rule_match()
ima: Access decompressed kernel module to verify appended signature
ima: add fs_subtype condition for distinguishing FUSE instances
ima: add dont_audit action to suppress audit actions
ima: Attach CREDS_CHECK IMA hook to bprm_creds_from_file LSM hook
|
|
Setup qemu with KVM then run kvm stat and some host
recording/reporting/build-id tests.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test that evlist reports expected events from perf record.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Compile a simple dlfilter and make sure it remove samples from
everything other than a test_loop.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test that kallsyms finds a well known symbol and fails for
another.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Basic coverage for `perf timechart` doing a record and then a basic
sanity test of the generated SVG file.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test starts a backgroup thloop workload and monitors it using
cpu-clock ensuring test_loop appears in the output.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add testing for the purge and remove commands. Use the noploop
workload rather than just a return to avoid missing samples in the
workload in perf record. Tidy up the cleanup code to cleanup when
signals happen.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add basic c2c record and report testing to gain some coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To deal with histogram code that had missing gets the c2c code had
some defensive gets. Those other issues were cleaned up by the
reference count checker, clean them up for the c2c command here.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reference count checking caught a missing dso__put following a
machine__findnew_dso_id.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reference count checking found the online CPU map was being gotten but
not put. Add in the missing put.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than exit the internal map_symbols directly, put the mem-info
that does this and also lowers the reference count on the mem-info
itself otherwise the mem-info is being leaked.
Fixes: 56e144fe98260a0f ("perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Move nsinfo__zput from cleanup_perf_probe_events to
clear_perf_probe_event so it is always executed. Clean up
clear_perf_probe_events to not call nsinfo__zput and use the pev
variable to avoid repeated array accesses.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add missing dso__put for the dso created in maps__split_kallsyms.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In dso__process_kernel_symbol if inserting a map fails, probably
ENOMEM, then the reference count puts were missing on the dso and map.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The '-o' option exists for the SVG creation but not for `perf
timechart record`. Add to better allow testing.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are 2 slots left for kvm_add_default_arch_event, fix the
assertion so that debug builds don't fail the assert and to agree with
the comment.
Fixes: 45ff39f6e70aa55d0 ("perf tools kvm: Fix the potential out of range memory access issue")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/445e38f5128592f8b5c38da30267fff025e37613
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/6edacf434dffa046435de2f6a182c00df3cf4edc
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/348f33fae477f281812c32e1c07812b7e35614dd
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/09a0c74b23b5d20adf1f97e5022856568d05494c
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/dc6ffee20c74bfd21d7a7e338345578d4b7ca9ca
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/b4acc3fd520eb098db41083010b65b75ae906c96
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated metrics were published in:
https://github.com/intel/perfmon/pull/348/commits/2dce436130ddfb8b442fc373d103f970de26cb78
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/588dd77675039e1aaacee27a414cbcf3625c58a3
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/c74f1cefa94d224cb3338507961b59d8a2a1c4e9
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add the following CPU variants to the list for data source decoding:
- Cortex-A715 [1]
- Cortex-A78C [2]
- Cortex-X1 [3]
- Cortex-X4 [4]
- Neoverse V3 [5]
[1] https://developer.arm.com/documentation/101590/0103/Statistical-Profiling-Extension-Support/Statistical-Profiling-Extension-data-source-packet
[2] https://developer.arm.com/documentation/102226/0002/Debug-descriptions/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
[3] https://developer.arm.com/documentation/101433/0102/Debug-descriptions/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
[4] https://developer.arm.com/documentation/102484/0003/Statistical-Profiling-Extension-support/Statistical-Profiling-Extension-data-source-packet
[5] https://developer.arm.com/documentation/107734/0002/Statistical-Profiling-Extension-support/Statistical-Profiling-Extension-data-source-packet
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In 754187ad73b73bcb ("perf build: Remove NO_AUXTRACE build option")
sys/types.h was removed, which broke the build in all Alpine Linux
releases, as musl libc has pid_t defined via sys/types.h, add it back.
Fixes: 754187ad73b73bcb ("perf build: Remove NO_AUXTRACE build option")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pull smack updates from Casey Schaufler:
- fix several cases where labels were treated inconsistently when
imported from user space
- clean up the assignment of extended attributes
- documentation improvements
* tag 'Smack-for-6.19' of https://github.com/cschaufler/smack-next:
Smack: function parameter 'gfp' not described
smack: fix kernel-doc warnings for smk_import_valid_label()
smack: fix bug: setting task label silently ignores input garbage
smack: fix bug: unprivileged task can create labels
smack: fix bug: invalid label of unix socket file
smack: always "instantiate" inode in smack_inode_init_security()
smack: deduplicate xattr setting in smack_inode_init_security()
smack: fix bug: SMACK64TRANSMUTE set on non-directory
smack: deduplicate "does access rule request transmutation"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Consolidate the loops in __audit_inode_child() to improve performance
When logging a child inode in __audit_inode_child(), we first run
through the list of recorded inodes looking for the parent and then
we repeat the search looking for a matching child entry. This pull
request consolidates both searches into one pass through the recorded
inodes, resuling in approximately a 50% reduction in audit overhead.
See the commit description for the testing details.
- Combine kmalloc()/memset() into kzalloc() in audit_krule_to_data()
- Comment fixes
* tag 'audit-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: merge loops in __audit_inode_child()
audit: Use kzalloc() instead of kmalloc()/memset() in audit_krule_to_data()
audit: fix comment misindentation in audit.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Improve the granularity of SELinux labeling for memfd files
Currently when creating a memfd file, SELinux treats it the same as
any other tmpfs, or hugetlbfs, file. While simple, the drawback is
that it is not possible to differentiate between memfd and tmpfs
files.
This adds a call to the security_inode_init_security_anon() LSM hook
and wires up SELinux to provide a set of memfd specific access
controls, including the ability to control the execution of memfds.
As usual, the commit message has more information.
- Improve the SELinux AVC lookup performance
Adopt MurmurHash3 for the SELinux AVC hash function instead of the
custom hash function currently used. MurmurHash3 is already used for
the SELinux access vector table so the impact to the code is minimal,
and performance tests have shown improvements in both hash
distribution and latency.
See the commit message for the performance measurments.
- Introduce a Kconfig option for the SELinux AVC bucket/slot size
While we have the ability to grow the number of AVC hash buckets
today, the size of the buckets (slot size) is fixed at 512. This pull
request makes that slot size configurable at build time through a new
Kconfig knob, CONFIG_SECURITY_SELINUX_AVC_HASH_BITS.
* tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: improve bucket distribution uniformity of avc_hash()
selinux: Move avtab_hash() to a shared location for future reuse
selinux: Introduce a new config to make avc cache slot size adjustable
memfd,selinux: call security_inode_init_security_anon()
|
|
Remove the superfluous section name quotes, and combine the longs into a
single command.
Before:
911: .pushsection ".discard.annotate_insn", "M", @progbits, 8; .long 911b - .; .long 2; .popsection
After:
911: .pushsection .discard.annotate_insn, "M", @progbits, 8; .long 911b - ., 2; .popsection
No change in functionality.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/hpsfcihgqmhcdrg7pop7z73ptymakgjq7qlxrawrjxilosk43l@xikqif3ievj4
|
|
overflows
When the kernel build fails due to an objtool segfault, the error
message is a bit obtuse and confusing:
make[5]: *** [scripts/Makefile.build:503: drivers/scsi/qla2xxx/qla2xxx.o] Error 139
^^^^^^^^^
make[5]: *** Deleting file 'drivers/scsi/qla2xxx/qla2xxx.o'
make[4]: *** [scripts/Makefile.build:556: drivers/scsi/qla2xxx] Error 2
make[3]: *** [scripts/Makefile.build:556: drivers/scsi] Error 2
make[2]: *** [scripts/Makefile.build:556: drivers] Error 2
make[1]: *** [/home/jpoimboe/git/linux/Makefile:2013: .] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Add a signal handler to objtool which prints an error message like if
the local stack has overflown (for which there's a chance as objtool
makes heavy use of recursion):
drivers/scsi/qla2xxx/qla2xxx.o: error: SIGSEGV: objtool stack overflow!
or:
drivers/scsi/qla2xxx/qla2xxx.o: error: SIGSEGV: objtool crash!
Also, re-raise the signal so the core dump still gets triggered.
[ mingo: Applied a build fix, added more comments and prettified the code. ]
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/mi4tihk4dbncn7belrhp6ooudhpw4vdggerktu5333w3gqf3uf@vqlhc3y667mg
|
|
Remove newlines and tabs from the annotation macros so the invoking code
can insert them as needed to match the style of the surrounding code.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/66305834c2eb78f082217611b756231ae9c0b555.1764694625.git.jpoimboe@kernel.org
|
|
Consolidate __ASM_ANNOTATE into a single macro which is used by both C
and asm. This also makes the code generation a bit more palatable by
putting it all on a single line.
Turn this:
911:
.pushsection .discard.annotate_insn,"M", @progbits, 8
.long 911b - .
.long 1
.popsection
jmp __x86_return_thunk
Into:
911: .pushsection ".discard.annotate_insn", "M", @progbits, 8; .long 911b - .; .long 1; .popsection
jmp __x86_return_thunk
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/c05ff40d3383e85c3b59018ef0b3c7aaf993a60d.1764694625.git.jpoimboe@kernel.org
|
|
A few cases of space-Tab noise snuck in.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/176478594889.498.15611228524880763978.tip-bot2@tip-bot2
|
|
and 'clk-qcom' into clk-next
* clk-visconti:
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
* clk-imx:
clk: imx: add driver for imx8ulp's sim lpav
dt-bindings: clock: document 8ULP's SIM LPAV
clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code
clk: imx: Add some delay before deassert the reset
* clk-microchip:
reset: mpfs: add non-auxiliary bus probing
clk: lan966x: remove unused dt-bindings include
clk: microchip: mpfs: use regmap for clocks
dt-bindings: clk: microchip: mpfs: remove first reg region
* clk-rockchip:
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
dt-bindings: clock: rk3568: Drop CLK_NR_CLKS define
clk: rockchip: rk3568: Drop CLK_NR_CLKS usage
dt-bindings: clock: rk3568: Add SCMI clock ids
* clk-qcom: (48 commits)
clk: qcom: Mark camcc_sm7150_hws static
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
clk: qcom: ecpricc-qdu100: Add mem_enable_mask to the clock memory branch
clk: qcom: clk_mem_branch: add enable mask and invert flags
clk: qcom: mmcc-sdm660: Add missing MDSS reset
dt-bindings: clock: mmcc-sdm660: Add missing MDSS reset
clk: qcom: use different Kconfig prompts for APSS IPQ5424/6018 drivers
clk: qcom: apss-ipq5424: remove unused 'apss_clk' structure
dt-bindings: clock: qcom: Add Kaanapali Global clock controller
dt-bindings: clock: qcom: Document the Kaanapali TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for Kaanapali
clk: qcom: tcsrcc-glymur: Update register offsets for clock refs
clk: qcom: gcc-qcs615: Update the SDCC clock to use shared_floor_ops
clk: qcom: camcc-sm7150: Fix PLL config of PLL2
clk: qcom: camcc-sm6350: Fix PLL config of PLL2
clk: qcom: Add NSS clock controller driver for IPQ5424
...
|
|
and 'clk-mediatek' into clk-next
* clk-socfpga:
clk: socfpga: agilex5: add clock driver for Agilex5
* clk-renesas: (35 commits)
clk: renesas: r9a09g077: Add SPI module clocks
clk: renesas: r9a09g056: Add USB3.0 clocks/resets
clk: renesas: r9a09g057: Add USB3.0 clocks/resets
clk: renesas: r9a09g047: Add RSCI clocks/resets
dt-bindings: clock: renesas,r9a09g056-cpg: Add USB3.0 core clocks
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB3.0 core clocks
clk: renesas: r9a06g032: Fix memory leak in error path
clk: renesas: r9a09g077: Use devm_ helpers for divider clock registration
clk: renesas: r9a09g077: Remove stray blank line
clk: renesas: r9a09g077: Propagate rate changes to parent clocks
clk: renesas: r8a779a0: Add 3DGE module clock
clk: renesas: r8a779a0: Add ZG Core clock
clk: renesas: rcar-gen4: Add support for clock dividers in FRQCRB
dt-bindings: clock: r8a779a0: Add ZG core clock
clk: renesas: r9a09g056: Add clock and reset entries for ISP
clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets
clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules
clk: renesas: r9a09g077: Add TSU module clock
clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
clk: renesas: rzv2h: Add support for DSI clocks
...
* clk-cleanup:
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: spacemit: fix comment typo
clk: keystone: Fix discarded const qualifiers
clk: sprd: sc9860: Simplify with of_device_get_match_data()
* clk-samsung:
firmware: exynos-acpm: add empty method to allow compile test
MAINTAINERS: add ACPM clock bindings and driver
clk: samsung: add Exynos ACPM clock driver
firmware: exynos-acpm: register ACPM clocks pdev
firmware: exynos-acpm: add DVFS protocol
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
clk: samsung: clk-pll: simplify samsung_pll_lock_wait()
clk: samsung: exynosautov920: add block mfc clock support
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add mfc clock definitions
dt-bindings: clock: exynosautov920: add m2m clock definitions
dt-bindings: clock: google,gs101-clock: add power-domains
* clk-mediatek:
clk: en7523: Add reset-controller support for EN7523 SoC
dt-bindings: clock: airoha: Add reset support to EN7523 clock binding
|
|
Add an eDP panel entry for AUO B140HAN06.4 that is also used in
some variants of Lenovo Flex 5G with Qcom SC8180 SoC.
The raw edid of the panel is:
00 ff ff ff ff ff ff 00 06 af 3d 64 00 00 00 00
2b 1d 01 04 a5 1f 11 78 03 b8 1a a6 54 4a 9b 26
0e 52 55 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
3e 00 35 ae 10 00 00 18 10 2c 80 b8 70 38 24 40
10 10 3e 00 35 ae 10 00 00 18 00 00 00 fe 00 41
55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
00 42 31 34 30 48 41 4e 30 36 2e 34 20 0a 00 eb
I do not have access to the datasheet and but it is tested on above
mentioned laptop for a few weeks and seems to work just fine with
timing info of similar panels.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251203074555.690613-1-alexey.klimov@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Rework the LSM initialization code
What started as a "quick" patch to enable a notification event once
all of the individual LSMs were initialized, snowballed a bit into a
30+ patch patchset when everything was done. Most of the patches, and
diffstat, is due to splitting out the initialization code into
security/lsm_init.c and cleaning up some of the mess that was there.
While not strictly necessary, it does cleanup the code signficantly,
and hopefully makes the upkeep a bit easier in the future.
Aside from the new LSM_STARTED_ALL notification, these changes also
ensure that individual LSM initcalls are only called when the LSM is
enabled at boot time. There should be a minor reduction in boot times
for those who build multiple LSMs into their kernels, but only enable
a subset at boot.
It is worth mentioning that nothing at present makes use of the
LSM_STARTED_ALL notification, but there is work in progress which is
dependent upon LSM_STARTED_ALL.
- Make better use of the seq_put*() helpers in device_cgroup
* tag 'lsm-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (36 commits)
lsm: use unrcu_pointer() for current->cred in security_init()
device_cgroup: Refactor devcgroup_seq_show to use seq_put* helpers
lsm: add a LSM_STARTED_ALL notification event
lsm: consolidate all of the LSM framework initcalls
selinux: move initcalls to the LSM framework
ima,evm: move initcalls to the LSM framework
lockdown: move initcalls to the LSM framework
apparmor: move initcalls to the LSM framework
safesetid: move initcalls to the LSM framework
tomoyo: move initcalls to the LSM framework
smack: move initcalls to the LSM framework
ipe: move initcalls to the LSM framework
loadpin: move initcalls to the LSM framework
lsm: introduce an initcall mechanism into the LSM framework
lsm: group lsm_order_parse() with the other lsm_order_*() functions
lsm: output available LSMs when debugging
lsm: cleanup the debug and console output in lsm_init.c
lsm: add/tweak function header comment blocks in lsm_init.c
lsm: fold lsm_init_ordered() into security_init()
lsm: cleanup initialize_lsm() and rename to lsm_init_single()
...
|
|
The x86 bootloader ID specification text uses hexadecimal
values without a 0x prefix:
D kexec-tools
E Extended (see ext_loader_type)
F Special (0xFF = undefined)
10 Reserved
11 Minimal Linux Bootloader
<http://sebastian-plotz.blogspot.de>
12 OVMF UEFI virtualization stack
13 barebox
Which beyond the ambiguity of '13' in isolation, also
made me fail a grep -wi '0xd' when I was looking for
the kexec bootloader ID definition and caused quite
a bit of head-scratching before I found out why it
didn't show up.
Furthermore, the actual explanatory text uses the 0x
prefix:
For boot loader IDs above T = 0xD, write T = 0xE to this field and
write the extended ID minus 0x10 to the ext_loader_type field.
Similarly, the ext_loader_ver field can be used to provide more than
four bits for the bootloader version.
So make it all both unambiguous, easy to grep and consistent
across the entire documentation by prefixing the IDs with 0x.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org
|
|
The bootloader ID specification text uses 2 capitalization
variants for the same thing: 'id', 'ids', 'ID' and 'IDs'.
Use 'ID/IDs' consistently.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull trusted key updates from Jarkko Sakkinen:
- Remove duplicate 'tpm2_hash_map' in favor of 'tpm2_find_hash_alg()'
- Fix a memory leak on failure paths of 'tpm2_load_cmd'
* tag 'keys-trusted-next-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Fix a memory leak in tpm2_load_cmd
KEYS: trusted: Replace a redundant instance of tpm2_hash_map
|
