summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-12-08svcrdma: use rc_pageoff for memcpy byte offsetJoshua Rogers
svc_rdma_copy_inline_range added rc_curpage (page index) to the page base instead of the byte offset rc_pageoff. Use rc_pageoff so copies land within the current page. Found by ZeroPath (https://zeropath.com) Fixes: 8e122582680c ("svcrdma: Move svc_rdma_read_info::ri_pageno to struct svc_rdma_recv_ctxt") Cc: stable@vger.kernel.org Signed-off-by: Joshua Rogers <linux@joshua.hu> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-12-08SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in ↵Joshua Rogers
gss_read_proxy_verf A zero length gss_token results in pages == 0 and in_token->pages[0] is NULL. The code unconditionally evaluates page_address(in_token->pages[0]) for the initial memcpy, which can dereference NULL even when the copy length is 0. Guard the first memcpy so it only runs when length > 0. Fixes: 5866efa8cbfb ("SUNRPC: Fix svcauth_gss_proxy_init()") Cc: stable@vger.kernel.org Signed-off-by: Joshua Rogers <linux@joshua.hu> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-12-08dma-buf: enable DMABUF_DEBUG by default on DEBUG kernelsChristian König
The overhead of enforcing the DMA-buf rules for importers is now so low that it safe to enable it by default on DEBUG kernels. This will hopefully result in fixing more issues in importers. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20251205130604.1582-2-christian.koenig@amd.com
2025-12-08dma-buf: improve sg_table debugging hack v4Christian König
This debugging hack is important to enforce the rule that importers should *never* touch the underlying struct page of the exporter. Instead of just mangling the page link create a copy of the sg_table but only copy over the DMA addresses and not the pages. This will cause a NULL pointer de-reference if the importer tries to touch the struct page. Still quite a hack but this at least allows the exporter to properly keeps it's sg_table intact while allowing the DMA-buf maintainer to find and fix misbehaving importers and finally switch over to using a different data structure in the future. v2: improve the hack further by using a wrapper structure and explaining the background a bit more in the commit message. v3: fix some whitespace issues, use sg_assign_page(). v4: give the functions a better name Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://lore.kernel.org/r/20251205130604.1582-1-christian.koenig@amd.com
2025-12-08drm/atomic: Add dev pointer to drm_private_objMaxime Ripard
All the objects that need to implement some callbacks in KMS have a pointer in there structure to the main drm_device. However, it's not the case for drm_private_objs, which makes it harder than it needs to be to implement some of its callbacks. Let's add that pointer. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20251014-drm-private-obj-reset-v2-1-6dd60e985e9d@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-12-08KVM: nVMX: Immediately refresh APICv controls as needed on nested VM-ExitDongli Zhang
If an APICv status updated was pended while L2 was active, immediately refresh vmcs01's controls instead of pending KVM_REQ_APICV_UPDATE as kvm_vcpu_update_apicv() only calls into vendor code if a change is necessary. E.g. if APICv is inhibited, and then activated while L2 is running: kvm_vcpu_update_apicv() | -> __kvm_vcpu_update_apicv() | -> apic->apicv_active = true | -> vmx_refresh_apicv_exec_ctrl() | -> vmx->nested.update_vmcs01_apicv_status = true | -> return Then L2 exits to L1: __nested_vmx_vmexit() | -> kvm_make_request(KVM_REQ_APICV_UPDATE) vcpu_enter_guest(): KVM_REQ_APICV_UPDATE -> kvm_vcpu_update_apicv() | -> __kvm_vcpu_update_apicv() | -> return // because if (apic->apicv_active == activate) Reported-by: Chao Gao <chao.gao@intel.com> Closes: https://lore.kernel.org/all/aQ2jmnN8wUYVEawF@intel.com Fixes: 7c69661e225c ("KVM: nVMX: Defer APICv updates while L2 is active until L1 is active") Cc: stable@vger.kernel.org Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> [sean: write changelog] Link: https://patch.msgid.link/20251205231913.441872-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-12-08KVM: VMX: Update SVI during runtime APICv activationDongli Zhang
The APICv (apic->apicv_active) can be activated or deactivated at runtime, for instance, because of APICv inhibit reasons. Intel VMX employs different mechanisms to virtualize LAPIC based on whether APICv is active. When APICv is activated at runtime, GUEST_INTR_STATUS is used to configure and report the current pending IRR and ISR states. Unless a specific vector is explicitly included in EOI_EXIT_BITMAP, its EOI will not be trapped to KVM. Intel VMX automatically clears the corresponding ISR bit based on the GUEST_INTR_STATUS.SVI field. When APICv is deactivated at runtime, the VM_ENTRY_INTR_INFO_FIELD is used to specify the next interrupt vector to invoke upon VM-entry. The VMX IDT_VECTORING_INFO_FIELD is used to report un-invoked vectors on VM-exit. EOIs are always trapped to KVM, so the software can manually clear pending ISR bits. There are scenarios where, with APICv activated at runtime, a guest-issued EOI may not be able to clear the pending ISR bit. Taking vector 236 as an example, here is one scenario. 1. Suppose APICv is inactive. Vector 236 is pending in the IRR. 2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR, and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq(). 3. After VM-entry, vector 236 is invoked through the guest IDT. At this point, the data in VM_ENTRY_INTR_INFO_FIELD is no longer valid. The guest interrupt handler for vector 236 is invoked. 4. Suppose a VM exit occurs very early in the guest interrupt handler, before the EOI is issued. 5. Nothing is reported through the IDT_VECTORING_INFO_FIELD because vector 236 has already been invoked in the guest. 6. Now, suppose APICv is activated. Before the next VM-entry, KVM calls kvm_vcpu_update_apicv() to activate APICv. 7. Unfortunately, GUEST_INTR_STATUS.SVI is not configured, although vector 236 is still pending in the ISR. 8. After VM-entry, the guest finally issues the EOI for vector 236. However, because SVI is not configured, vector 236 is not cleared. 9. ISR is stalled forever on vector 236. Here is another scenario. 1. Suppose APICv is inactive. Vector 236 is pending in the IRR. 2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR, and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq(). 3. VM-exit occurs immediately after the next VM-entry. The vector 236 is not invoked through the guest IDT. Instead, it is saved to the IDT_VECTORING_INFO_FIELD during the VM-exit. 4. KVM calls kvm_queue_interrupt() to re-queue the un-invoked vector 236 into vcpu->arch.interrupt. A KVM_REQ_EVENT is requested. 5. Now, suppose APICv is activated. Before the next VM-entry, KVM calls kvm_vcpu_update_apicv() to activate APICv. 6. Although APICv is now active, KVM still uses the legacy VM_ENTRY_INTR_INFO_FIELD to re-inject vector 236. GUEST_INTR_STATUS.SVI is not configured. 7. After the next VM-entry, vector 236 is invoked through the guest IDT. Finally, an EOI occurs. However, due to the lack of GUEST_INTR_STATUS.SVI configuration, vector 236 is not cleared from the ISR. 8. ISR is stalled forever on vector 236. Using QEMU as an example, vector 236 is stuck in ISR forever. (qemu) info lapic 1 dumping local APIC state for CPU 1 LVT0 0x00010700 active-hi edge masked ExtINT (vec 0) LVT1 0x00010400 active-hi edge masked NMI LVTPC 0x00000400 active-hi edge NMI LVTERR 0x000000fe active-hi edge Fixed (vec 254) LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0) LVTT 0x000400ec active-hi edge tsc-deadline Fixed (vec 236) Timer DCR=0x0 (divide by 2) initial_count = 0 current_count = 0 SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255 ICR 0x000000fd physical edge de-assert no-shorthand ICR2 0x00000000 cpu 0 (X2APIC ID) ESR 0x00000000 ISR 236 IRR 37(level) 236 The issue isn't applicable to AMD SVM as KVM simply writes vmcb01 directly irrespective of whether L1 (vmcs01) or L2 (vmcb02) is active (unlike VMX, there is no need/cost to switch between VMCBs). In addition, APICV_INHIBIT_REASON_IRQWIN ensures AMD SVM AVIC is not activated until the last interrupt is EOI'd. Fix the bug by configuring Intel VMX GUEST_INTR_STATUS.SVI if APICv is activated at runtime. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Link: https://patch.msgid.link/20251110063212.34902-1-dongli.zhang@oracle.com [sean: call out that SVM writes vmcb01 directly, tweak comment] Link: https://patch.msgid.link/20251205231913.441872-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-12-08s390/bug: Add missing alignmentHeiko Carstens
All objects are supposed to have a minimal alignment of two, since a couple of instructions only work with even addresses. Add the missing align statement for the file string. Fixes: 6584ff203aec ("bugs/s390: Use 'cond_str' in __EMIT_BUG()") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-12-08s390/bug: Add missing CONFIG_BUG ifdef againHeiko Carstens
Fallback to generic BUG implementation in case CONFIG_BUG is disabled. This restores the old behaviour before 'cond_str' support was added. It probably doesn't matter, since nobody should disable CONFIG_BUG, but at least this is consistent to before. Fixes: 6584ff203aec ("bugs/s390: Use 'cond_str' in __EMIT_BUG()") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-12-08ALSA: uapi: Fix typo in asound.h commentAndres J Rosa
Fix 'level-shit' to 'level-shift' in struct snd_cea_861_aud_if comment. Fixes: 7ba1c40b536e ("ALSA: Add definitions for CEA-861 Audio InfoFrames") Signed-off-by: Andres J Rosa <andyrosa@gmail.com> Link: https://patch.msgid.link/20251203162509.1822-1-andyrosa@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-12-08drm/xe/throttle: Skip reason prefix while emitting arrayRaag Jadav
The newly introduced "reasons" attribute already signifies possible reasons for throttling and makes the prefix in individual attribute names redundant while emitting them as an array. Skip the prefix. Fixes: 83ccde67a3f7 ("drm/xe/gt_throttle: Avoid TOCTOU when monitoring reasons") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Sk Anirban <sk.anirban@intel.com> Link: https://patch.msgid.link/20251203123355.571606-1-raag.jadav@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-12-08KVM: s390: Fix gmap_helper_zap_one_page() againClaudio Imbrenda
A few checks were missing in gmap_helper_zap_one_page(), which can lead to memory corruption in the guest under specific circumstances. Add the missing checks. Fixes: 5deafa27d9ae ("KVM: s390: Fix to clear PTE when discarding a swapped page") Cc: stable@vger.kernel.org Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-12-08i2c: qcom-cci: Add msm8953 compatibleLuca Weiss
Add a config for the v1.2.5 CCI found on msm8953 which has different values in .params compared to others already supported in the driver. Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-12-08Merge tag 'i2c-host-6.19-v2' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow i2c-host for v6.19 - general cleanups in bcm2835, designware, pcf8584, and stm32 - amd-mp2: fix device refcount - designware: avoid interrupt storms caused by bad firmware - i801: fix supported features - spacemit: fix device detection failures New device support: - Intel Diamond Rapids - Rockchip RK3506 - Qualcomm Kaanapali, MSM8953
2025-12-08LoongArch: Adjust default config files for 32BIT/64BITHuacai Chen
Add loongson32_defconfig (for 32BIT) and rename loongson3_defconfig to loongson64_defconfig (for 64BIT). Also adjust graphics drivers, such as FB_EFI is replaced with EFIDRM. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BITHuacai Chen
Adjust VDSO/VSYSCALL because read_cpu_id() for 32BIT/64BIT are different, and LoongArch32 doesn't support GENERIC_GETTIMEOFDAY now (will be supported in future). Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust misc routines for 32BIT/64BITHuacai Chen
Adjust misc routines for both 32BIT and 64BIT, including: bitops, bswap, checksum, string, jump label, unaligned access emulator, suspend/wakeup routines, etc. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust user accessors for 32BIT/64BITHuacai Chen
Adjust user accessors for both 32BIT and 64BIT, including: get_user(), put_user(), copy_user(), clear_user(), etc. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust system call for 32BIT/64BITHuacai Chen
Adjust system call for both 32BIT and 64BIT, including: add the uapi unistd_{32,64}.h and syscall_table_{32,64}.h inclusion, add sys_mmap2() definition, change the system call entry routines, etc. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust module loader for 32BIT/64BITHuacai Chen
Adjust module loader for both 32BIT and 64BIT, including: change the s64 type to long, change the u64 type to unsigned long, change the plt entry definition and handling, etc. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust time routines for 32BIT/64BITHuacai Chen
Adjust time routines for both 32BIT and 64BIT, including: rdtime_h() / rdtime_l() definitions for 32BIT and rdtime_d() definition for 64BIT, get_cycles() and get_cycles64() definitions for 32BIT/64BIT, show time frequency info ("CPU MHz" and "BogoMIPS") in /proc/cpuinfo, etc. Use do_div() for division which works on both 32BIT and 64BIT platforms. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust process management for 32BIT/64BITHuacai Chen
Adjust process management for both 32BIT and 64BIT, including: CPU context switching, FPU loading/restoring, process dumping and process tracing routines. Q: Why modify switch.S? A: LoongArch32 has no ldptr.d/stptr.d instructions, and asm offsets of thead_struct members are too large to be filled in the 12b immediate field of ld.w/st.w. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust memory management for 32BIT/64BITHuacai Chen
Adjust memory management for both 32BIT and 64BIT, including: address space definition, DMW CSR definition, page table bits definition, boot time detection of VA/PA bits, page table init, tlb exception handling, copy_page/clear_page/dump_tlb libraries, etc. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Yawei Li <liyawei@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08LoongArch: Adjust boot & setup for 32BIT/64BITHuacai Chen
Adjust boot & setup for both 32BIT and 64BIT, including: efi header definition, MAX_IO_PICS definition, kernel entry and environment setup routines, etc. Add a fallback path in fdt_cpu_clk_init() to avoid 0MHz in /proc/cpuinfo if there is no valid clock freq from firmware. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-12-08Documentation/gpu/drm-mm: Add THP paragraph to GEM mapping sectionLoïc Molinari
Add a paragraph to the GEM Objects Creation section about the drm_gem_huge_mnt_create() helper and to the GEM objects mapping section explaining how transparent huge pages are handled by GEM. v4: - fix wording after huge_pages handler removal v6: - fix wording after map_pages handler removal v11: - mention drm_gem_huge_mnt_create() helper - add Boris and Maíra R-bs Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patch.msgid.link/20251205182231.194072-11-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/panfrost: Introduce huge tmpfs mountpoint optionLoïc Molinari
Introduce the 'panfrost.transparent_hugepage' boolean module parameter (false by default). When the parameter is set to true, a new tmpfs mountpoint is created and mounted using the 'huge=within_size' option. It's then used at GEM object creation instead of the default 'shm_mnt' mountpoint in order to enable Transparent Hugepage (THP) for the object (without having to rely on a system wide parameter). v3: - use huge tmpfs mountpoint in drm_device v4: - fix builds with CONFIG_TRANSPARENT_HUGEPAGE=n - clean up mountpoint creation error handling - print negative error value v5: - use drm_gem_has_huge_tmp() helper - get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs v9: - replace drm_gem_has_huge_tmp() by drm_gem_get_huge_tmp() v11: - enable 'panfrost.transparent_hugepage' by default Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20251205182231.194072-10-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/panthor: Introduce huge tmpfs mountpoint optionLoïc Molinari
Introduce the 'panthor.transparent_hugepage' boolean module parameter (false by default). When the parameter is set to true, a new tmpfs mountpoint is created and mounted using the 'huge=within_size' option. It's then used at GEM object creation instead of the default 'shm_mnt' mountpoint in order to enable Transparent Hugepage (THP) for the object (without having to rely on a system wide parameter). v3: - use huge tmpfs mountpoint in drm_device v4: - fix builds with CONFIG_TRANSPARENT_HUGEPAGE=n - clean up mountpoint creation error handling - print negative error value v5: - use drm_gem_has_huge_tmp() helper - get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs v9: - replace drm_gem_has_huge_tmp() by drm_gem_get_huge_tmp() v11: - enable 'panthor.transparent_hugepage' by default Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20251205182231.194072-9-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/gem: Get rid of *_with_mnt helpersLoïc Molinari
drm_gem_object_init_with_mnt() and drm_gem_shmem_create_with_mnt() can be removed now that the drivers use the new drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers. v5: - use drm_gem_has_huge_mnt() helper - compile out shmem_file_setup_with_mnt() call in builds with CONFIG_TRANSPARENT_HUGEPAGE=n v9: - replace drm_gem_has_huge_mnt() with drm_gem_get_huge_mnt() Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patch.msgid.link/20251205182231.194072-8-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/v3d: Use huge tmpfs mountpoint helpersLoïc Molinari
Make use of the new drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that it's just a few lines long, the single function in v3d_gemfs.c is moved into v3d_gem.c. v3: - use huge tmpfs mountpoint in drm_device - move v3d_gemfs.c into v3d_gem.c v4: - clean up mountpoint creation error handling v5: - fix CONFIG_TRANSPARENT_HUGEPAGE check - use drm_gem_has_huge_mnt() helper v8: - don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n v9: - replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt() v10: - get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs v11: - remove superfluous comment - add Maíra and Boris R-bs Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20251205182231.194072-7-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/i915: Use huge tmpfs mountpoint helpersLoïc Molinari
Make use of the new drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that it's just a few lines long, the single function in i915_gemfs.c is moved into i915_gem_shmem.c. v3: - use huge tmpfs mountpoint in drm_device - move i915_gemfs.c into i915_gem_shmem.c v4: - clean up mountpoint creation error handling v5: - use drm_gem_has_huge_mnt() helper v7: - include <drm/drm_print.h> in i915_gem_shmem.c v8: - keep logging notice message with CONFIG_TRANSPARENT_HUGEPAGE=n - don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n v9: - replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt() - remove useless ternary op test in selftests/huge_pages.c v12: - fix layering violation in selftests (Tvrtko) - fix incorrect filename in commit message v13: - add Tvrtko A-b Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Acked-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://patch.msgid.link/20251205182231.194072-6-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/gem: Add huge tmpfs mountpoint helpersLoïc Molinari
Add the drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers to avoid code duplication in the i915, V3D, Panfrost and Panthor drivers. The former creates and mounts a dedicated huge tmpfs mountpoint, for the lifetime of a DRM device, used at GEM object initialization. The latter retrieves the dedicated huge tmpfs mountpoint used by a DRM device. The next commits will port drivers to these helpers. v3: - store huge tmpfs mountpoint in drm_device v4: - return 0 in builds with CONFIG_TRANSPARENT_HUGEPAGE=n - return 0 when huge_mnt already exists - use new vfs_parse_fs_string() helper v5: - remove warning on !dev->huge_mnt and reset to NULL on free - inline drm_gem_huge_mnt_create() to remove func from text and avoid calls in builds with CONFIG_TRANSPARENT_HUGEPAGE=n - compile out drm_device's huge_mnt field in builds with CONFIG_TRANSPARENT_HUGEPAGE=n - add drm_gem_has_huge_mnt() helper v6: - move huge_mnt doc into ifdef'd section - either inline or export drm_gem_huge_mnt_create() v7: - include <drm/drm_device.h> in drm_gem.h v9: - replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt() v11: - doc fixes - add Boris and Maíra R-bs Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patch.msgid.link/20251205182231.194072-5-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/gem: Introduce drm_gem_get_unmapped_area() fopLoïc Molinari
mmap() calls on the DRM file pointer currently always end up using mm_get_unmapped_area() to get a free mapping region. On builds with CONFIG_TRANSPARENT_HUGEPAGE enabled, this isn't ideal for GEM objects backed by shmem buffers on mountpoints setting the 'huge=' option because it can't correctly figure out the potentially huge address alignment required. This commit introduces the drm_gem_get_unmapped_area() function which is meant to be used as a get_unmapped_area file operation on the DRM file pointer to lookup GEM objects based on their fake offsets and get a properly aligned region by calling shmem_get_unmapped_area() with the right file pointer. If a GEM object isn't available at the given offset or if the caller isn't granted access to it, the function falls back to mm_get_unmapped_area(). This also makes drm_gem_get_unmapped_area() part of the default GEM file operations so that all the DRM drivers can benefit from more efficient mappings thanks to the huge page fault handler introduced in previous commit 'drm/shmem-helper: Add huge page fault handler'. The shmem_get_unmapped_area() function needs to be exported so that it can be used from the DRM subsystem. v3: - include <linux/sched/mm.h> in drm_gem.c - forward to shmem layer in builds with CONFIG_TRANSPARENT_HUGEPAGE=n v6: - use GPL variant to export drm_gem_get_unmapped_area() - don't export shmem_get_unmapped_area() anymore (use f_op instead) v11: - rename drm_gem_object_lookup_from_offset() to drm_gem_object_lookup_at_offset() - add Boris R-b Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20251205182231.194072-4-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/shmem-helper: Map huge pages in fault handlerLoïc Molinari
Attempt a PMD sized PFN insertion into the VMA if the faulty address of the fault handler is part of a huge page. On builds with CONFIG_TRANSPARENT_HUGEPAGE enabled, if the mmap() user address is PMD size aligned, if the GEM object is backed by shmem buffers on mountpoints setting the 'huge=' option and if the shmem backing store manages to allocate a huge folio, CPU mapping would then benefit from significantly increased memcpy() performance. When these conditions are met on a system with 2 MiB huge pages, an aligned copy of 2 MiB would raise a single page fault instead of 4096. v4: - implement map_pages instead of huge_fault v6: - get rid of map_pages handler for now (keep it for another series along with arm64 contpte support) v11: - remove page fault validity check helper - rename drm_gem_shmem_map_pmd() to drm_gem_shmem_try_map_pmd() - add Boris R-b v12: - move up ret var decl in fault handler to minimize diff Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20251205182231.194072-3-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08drm/shmem-helper: Simplify page offset calculation in fault handlerLoïc Molinari
For a fault at address addr, the page offset is page_offset = (vmf->address - vma->vm_start) >> PAGE_SHIFT = ((addr & PAGE_MASK) - vma->vm_start) >> PAGE_SHIFT = (addr - vma->vm_start) >> PAGE_SHIFT Since the faulty logical page offset based on VMA is vmf->pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT) We can slightly simplify the calculation using page_offset = vmf->pgoff - vma->vm_pgoff v11: - remove misleading comment - add Boris R-b Signed-off-by: Loïc Molinari <loic.molinari@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patch.msgid.link/20251205182231.194072-2-loic.molinari@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-12-08dma-mapping: Fix DMA_BIT_MASK() macro being brokenHans de Goede
After commit a50f7456f853 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope"), the DMA_BIT_MASK() macro is broken when passed non trivial statements for the value of 'n'. This is caused by the new version missing parenthesis around 'n' when evaluating 'n'. One example of this breakage is the IPU6 driver now crashing due to it getting DMA-addresses with address bit 32 set even though it has tried to set a 32 bit DMA mask. The IPU6 CSI2 engine has a DMA mask of either 31 or 32 bits depending on if it is in secure mode or not and it sets this masks like this: mmu_info->aperture_end = (dma_addr_t)DMA_BIT_MASK(isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE); So the 'n' argument here is "isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE" which gets expanded into: isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE - 1 With the -1 only being applied in the non secure case, causing the secure mode mask to be one 1 bit too large. Fixes: a50f7456f853 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope") Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: James Clark <james.clark@linaro.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20251207184756.97904-1-johannes.goede@oss.qualcomm.com
2025-12-08dma/pool: eliminate alloc_pages warning in atomic_pool_expandDave Kleikamp
atomic_pool_expand iteratively tries the allocation while decrementing the page order. There is no need to issue a warning if an attempted allocation fails. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone") [mszyprow: fixed typo] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20251202152810.142370-1-dave.kleikamp@oracle.com
2025-12-08drm/i915: Fix format string truncation warningArd Biesheuvel
GCC notices that the 16-byte uabi_name field could theoretically be too small for the formatted string if the instance number exceeds 100. So grow the field to 20 bytes. drivers/gpu/drm/i915/intel_memory_region.c: In function ‘intel_memory_region_create’: drivers/gpu/drm/i915/intel_memory_region.c:273:61: error: ‘%u’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 3 and 11 [-Werror=format-truncation=] 273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u", | ^~ drivers/gpu/drm/i915/intel_memory_region.c:273:58: note: directive argument in the range [0, 65535] 273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u", | ^~~~~~ drivers/gpu/drm/i915/intel_memory_region.c:273:9: note: ‘snprintf’ output between 7 and 19 bytes into a destination of size 16 273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 274 | intel_memory_type_str(type), instance); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20251205113500.684286-2-ardb@kernel.org
2025-12-08soundwire: intel_ace2x: handle multi BPT sectionsBard Liao
Calculate required PDI buffer and pass the section number to the cdns BPT helpers. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Tested-by: Shuming Fan <shumingf@realtek.com> Link: https://patch.msgid.link/20251021094355.132943-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: pass sdw_bpt_section to cdns BPT helpersBard Liao
We can get start_register, data_size, and buffer data from the new sdw_bpt_section parameter. Also, handle all register sections in the cdns BRA helpers. No function changes as section number is 1. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Tested-by: Shuming Fan <shumingf@realtek.com> Link: https://patch.msgid.link/20251021094355.132943-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: introduce BPT sectionBard Liao
Currently we send a BRA message with a start address with continuous registers in a BPT stream. However, a codec may need to write different register sections shortly. Introduce a register section in struct sdw_btp_msg which contain register start address, length, and buffer. This commit uses only 1 section for each BPT message. And we need to add up all BPT section length and check if it reach maximum BPT bytes. No function changes. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Tested-by: Shuming Fan <shumingf@realtek.com> Link: https://patch.msgid.link/20251021094355.132943-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: intel_ace2x: add fake frame to BRA read commandBard Liao
Intel DMA buffer size need to be a multiple of data block size. Find the minimal fake data size and extra buffer size to meet the requirement. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251030070253.1216871-8-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: cadence_master: add fake_size parameter to ↵Bard Liao
sdw_cdns_prepare_read_dma_buffer We may need to add few fake frames to fit the aligned read dma buffer size. Add a fake_size parameter to allow the caller to set the fake data size. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251014031450.3781789-7-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligmentBard Liao
The dma buffer need to be a multiple of data block size and the fifo size. Export a function to return the LCM of data block size and the fifo size. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251014031450.3781789-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: cadence: export sdw_cdns_bpt_find_bandwidthBard Liao
Currently, we calculate the required bandwidth after the PDI buffer size is calculated. However as we need to add some fake frame to align the data block size, the final PDI size and the frame number will change. Besides, we need the required bandwidth to decide the DMA channel number and the channel number will be used to calculate the data block size. Therefore, we calculate the required bandwidth and export a helper for the caller to get the required bandwidth. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251014031450.3781789-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: cadence_master: set data_per_frame as frame capabilityBard Liao
data_per_frame will be used for preparing the TX buffer and we may add some fake frames to ensure the data in the buffer will be flushed. So that it should indicate the frame capability even if the required data bytes are less than the frame capability. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251014031450.3781789-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: only compute BPT stream in sdw_compute_dp0_port_paramsBard Liao
DP0 is only for BPT stream. We should not compute and update the port params of the normal audio streams. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251014031450.3781789-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: cadence_master: make frame index trace more readableBard Liao
The existing code uses i as the frame index which is 0 based. And "bad frame %d/%d", i, num_frames where num_frames is 1 based. Change the frame index to i + 1 to align with num_frames and more readable. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251014031450.3781789-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: qcom: adding support for v3.1.0Srinivas Kandagatla
Add support for controller version v3.1.0, which has changes in register layout and some register fields compared to v2.0. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550 Link: https://patch.msgid.link/20250912083225.228778-8-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08dt-bindings: soundwire: qcom: Document v3.1.0 version of IP blockSrinivas Kandagatla
Add bindings for Soundwire controllers v3.1.0, which is available on Qualcomm Glymur SoC. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550 Link: https://patch.msgid.link/20250912083225.228778-7-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-08soundwire: qcom: prepare for v3.xSrinivas Kandagatla
cleanup the register layout structs to prepare for adding new 3.x controller support. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550 Link: https://patch.msgid.link/20250912083225.228778-6-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-27 02:46:00 +0000