diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-imx-lpi2c.c | 7 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-qcom-geni.c | 11 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-riic.c | 46 |
4 files changed, 62 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml index 2aa75b7add7b..daa70a8500e9 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml @@ -16,7 +16,8 @@ properties: - brcm,iproc-nic-i2c reg: - maxItems: 1 + minItems: 1 + maxItems: 2 clock-frequency: enum: [ 100000, 400000 ] @@ -41,8 +42,15 @@ allOf: contains: const: brcm,iproc-nic-i2c then: + properties: + reg: + minItems: 2 required: - brcm,ape-hsls-addr-mask + else: + properties: + reg: + maxItems: 1 unevaluatedProperties: false diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 2a0962a0b441..d882126c1778 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -593,6 +593,13 @@ static bool is_use_dma(struct lpi2c_imx_struct *lpi2c_imx, struct i2c_msg *msg) return false; /* + * A system-wide suspend or resume transition is in progress. LPI2C should use PIO to + * transfer data to avoid issue caused by no ready DMA HW resource. + */ + if (pm_suspend_in_progress()) + return false; + + /* * When the length of data is less than I2C_DMA_THRESHOLD, * cpu mode is used directly to avoid low performance. */ diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 3a04016db2c3..ae609bdd2ec4 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -116,6 +116,7 @@ struct geni_i2c_dev { dma_addr_t dma_addr; struct dma_chan *tx_c; struct dma_chan *rx_c; + bool no_dma; bool gpi_mode; bool abort_done; bool is_tx_multi_desc_xfer; @@ -447,7 +448,7 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, size_t len = msg->len; struct i2c_msg *cur; - dma_buf = i2c_get_dma_safe_msg_buf(msg, 32); + dma_buf = gi2c->no_dma ? NULL : i2c_get_dma_safe_msg_buf(msg, 32); if (dma_buf) geni_se_select_mode(se, GENI_SE_DMA); else @@ -486,7 +487,7 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, size_t len = msg->len; struct i2c_msg *cur; - dma_buf = i2c_get_dma_safe_msg_buf(msg, 32); + dma_buf = gi2c->no_dma ? NULL : i2c_get_dma_safe_msg_buf(msg, 32); if (dma_buf) geni_se_select_mode(se, GENI_SE_DMA); else @@ -1080,10 +1081,12 @@ static int geni_i2c_probe(struct platform_device *pdev) goto err_resources; } - if (desc && desc->no_dma_support) + if (desc && desc->no_dma_support) { fifo_disable = false; - else + gi2c->no_dma = true; + } else { fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE; + } if (fifo_disable) { /* FIFO is disabled, so we can only use GPI DMA */ diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 3e8f126cb7f7..9e3595b3623e 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -670,12 +670,39 @@ static const struct riic_of_data riic_rz_t2h_info = { static int riic_i2c_suspend(struct device *dev) { - struct riic_dev *riic = dev_get_drvdata(dev); - int ret; + /* + * Some I2C devices may need the I2C controller to remain active + * during resume_noirq() or suspend_noirq(). If the controller is + * autosuspended, there is no way to wake it up once runtime PM is + * disabled (in suspend_late()). + * + * During system resume, the I2C controller will be available only + * after runtime PM is re-enabled (in resume_early()). However, this + * may be too late for some devices. + * + * Wake up the controller in the suspend() callback while runtime PM + * is still enabled. The I2C controller will remain available until + * the suspend_noirq() callback (pm_runtime_force_suspend()) is + * called. During resume, the I2C controller can be restored by the + * resume_noirq() callback (pm_runtime_force_resume()). + * + * Finally, the resume() callback re-enables autosuspend, ensuring + * the I2C controller remains available until the system enters + * suspend_noirq() and from resume_noirq(). + */ + return pm_runtime_resume_and_get(dev); +} - ret = pm_runtime_resume_and_get(dev); - if (ret) - return ret; +static int riic_i2c_resume(struct device *dev) +{ + pm_runtime_put_autosuspend(dev); + + return 0; +} + +static int riic_i2c_suspend_noirq(struct device *dev) +{ + struct riic_dev *riic = dev_get_drvdata(dev); i2c_mark_adapter_suspended(&riic->adapter); @@ -683,12 +710,12 @@ static int riic_i2c_suspend(struct device *dev) riic_clear_set_bit(riic, ICCR1_ICE, 0, RIIC_ICCR1); pm_runtime_mark_last_busy(dev); - pm_runtime_put_sync(dev); + pm_runtime_force_suspend(dev); return reset_control_assert(riic->rstc); } -static int riic_i2c_resume(struct device *dev) +static int riic_i2c_resume_noirq(struct device *dev) { struct riic_dev *riic = dev_get_drvdata(dev); int ret; @@ -697,6 +724,10 @@ static int riic_i2c_resume(struct device *dev) if (ret) return ret; + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + ret = riic_init_hw(riic); if (ret) { /* @@ -714,6 +745,7 @@ static int riic_i2c_resume(struct device *dev) } static const struct dev_pm_ops riic_i2c_pm_ops = { + NOIRQ_SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend_noirq, riic_i2c_resume_noirq) SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend, riic_i2c_resume) }; |