Pull networking fixes from David Miller:
1) Fix some length checks during OGM processing in batman-adv, from
Sven Eckelmann.
2) Fix regression that caused netfilter conntrack sysctls to not be
per-netns any more. From Florian Westphal.
3) Use after free in netpoll, from Feng Sun.
4) Guard destruction of pfifo_fast per-cpu qdisc stats with
qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed
in pfifo_fast_enqueue().
5) Fix memory leak in mld_del_delrec(), from Eric Dumazet.
6) Handle neigh events on internal ports correctly in nfp, from John
Hurley.
7) Clear SKB timestamp in NF flow table code so that it does not
confuse fq scheduler. From Florian Westphal.
8) taprio destroy can crash if it is invoked in a failure path of
taprio_init(), because the list head isn't setup properly yet and
the list del is unconditional. Perform the list add earlier to
address this. From Vladimir Oltean.
9) Make sure to reapply vlan filters on device up, in aquantia driver.
From Dmitry Bogdanov.
10) sgiseeq driver releases DMA memory using free_page() instead of
dma_free_attrs(). From Christophe JAILLET.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: seeq: Fix the function used to release some memory in an error handling path
enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions
net: bcmgenet: use ethtool_op_get_ts_info()
tc-testing: don't hardcode 'ip' in nsPlugin.py
net: dsa: microchip: add KSZ8563 compatibility string
dt-bindings: net: dsa: document additional Microchip KSZ8563 switch
net: aquantia: fix out of memory condition on rx side
net: aquantia: linkstate irq should be oneshot
net: aquantia: reapply vlan filters on up
net: aquantia: fix limit of vlan filters
net: aquantia: fix removal of vlan 0
net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte
taprio: Fix kernel panic in taprio_destroy
net: dsa: microchip: fill regmap_config name
rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]
net: stmmac: dwmac-rk: Don't fail if phy regulator is absent
amd-xgbe: Fix error path in xgbe_mod_init()
netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder
mac80211: Correctly set noencrypt for PAE frames
...
Pull turbostat updates from Len Brown: "User-space turbostat (and x86_energy_perf_policy) patches. They are primarily bug fixes from users" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL tools/power turbostat: Fix caller parameter of get_tdp_amd() tools/power turbostat: Fix CPU%C1 display value tools/power turbostat: do not enforce 1ms tools/power turbostat: read from pipes too tools/power turbostat: Add Ice Lake NNPI support tools/power turbostat: rename has_hsw_msrs() tools/power turbostat: Fix Haswell Core systems tools/power turbostat: add Jacobsville support tools/power turbostat: fix buffer overrun tools/power turbostat: fix file descriptor leaks tools/power turbostat: fix leak of file descriptor on error return path tools/power turbostat: Make interval calculation per thread to reduce jitter tools/power turbostat: remove duplicate pc10 column tools/power x86_energy_perf_policy: Fix argument parsing tools/power: Fix typo in man page tools/power/x86: Enable compiler optimisations and Fortify by default tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2
the following tdc test fails on Fedora:
# ./tdc.py -e 2638
-- ns/SubPlugin.__init__
Test 2638: Add matchall and try to get it
-----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact"
-----> prepare stage *** Error message: "/bin/sh: ip: command not found"
returncode 127; expected [0]
-----> prepare stage *** Aborting test run.
Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9
("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is
correctly resolved to the value we have in tdc_config.py.
# ./tdc.py -e 2638
-- ns/SubPlugin.__init__
Test 2638: Add matchall and try to get it
All test results:
1..1
ok 1 2638 - Add matchall and try to get it
Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Today is 19.08.31, at least in some parts of the world. Signed-off-by: Len Brown <len.brown@intel.com>
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") and the commit 3316f99a9f1b68c578c5 ("tools/power
turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h
RAPL support.
Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX,
and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon
Dhyana Family 18h support for RAPL.
Already tested on Hygon multi-node systems and it shows correct per-core
energy usage and the total package power.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU
family. But the rapl_probe_amd() function use wrong model parameter.
Fix the wrong caller parameter of get_tdp_amd() to use family.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Pu Wen <puwen@hygon.cn>
Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
In some case C1% will be wrong value, when platform doesn't have MSR for C1 residency. For example: Core CPU CPU%c1 - - 100.00 0 0 100.00 0 2 100.00 1 1 100.00 1 3 100.00 But adding Busy% will fix this Core CPU Busy% CPU%c1 - - 99.77 0.23 0 0 99.77 0.23 0 2 99.77 0.23 1 1 99.77 0.23 1 3 99.77 0.23 This issue can be reproduced on most of the recent systems including Broadwell, Skylake and later. This is because if we don't select Busy% or Avg_MHz or Bzy_MHz then mperf value will not be read from MSR, so it will be 0. But this is required for C1% calculation when MSR for C1 residency is not present. Same is true for C3, C6 and C7 column selection. So add another define DO_BIC_READ(), which doesn't depend on user column selection and use for mperf, C3, C6 and C7 related counters. So when there is no platform support for C1 residency counters, we still read these counters, if the CPU has support and user selected display of CPU%c1. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat works by taking a snapshot of counters, sleeping, taking another snapshot, calculating deltas, and printing out the table. The sleep time is controlled via -i option or by user sending a signal or a character to stdin. In the latter case, turbostat always adds 1 ms sleep before it reads the counters, in order to avoid larger imprecisions in the results in prints. While the 1 ms delay may be a good idea for a "dumb" user, it is a problem for an "aware" user. I do thousands and thousands of measurements over a short period of time (like 2ms), and turbostat unconditionally adds a 1ms to my interval, so I cannot get what I really need. This patch removes the unconditional 1ms sleep. This is an expert user tool, after all, and non-experts will unlikely ever use it in the non-fixed interval mode anyway, so I think it is OK to remove the 1ms delay. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Commit '47936f944e78 tools/power turbostat: fix printing on input' make a valid fix, but it completely disabled piped stdin support, which is a valuable use-case. Indeed, if stdin is a pipe, turbostat won't read anything from it, so it becomes impossible to get turbostat output at user-defined moments, instead of the regular intervals. There is no reason why this should works for terminals, but not for pipes. This patch improves the situation. Instead of ignoring pipes, we read data from them but gracefully handle the EOF case. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
This enables turbostat utility on Ice Lake NNPI SoC. Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>