Pull x86/pti fixes from Thomas Gleixner:
 "Three fixes related to melted spectrum:

   - Sync the cpu_entry_area page table to initial_page_table on 32 bit.

     Otherwise suspend/resume fails because resume uses
     initial_page_table and triggers a triple fault when accessing the
     cpu entry area.

   - Zero the SPEC_CTL MRS on XEN before suspend to address a
     shortcoming in the hypervisor.

   - Fix another switch table detection issue in objtool"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
  objtool: Fix another switch table detection issue
  x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend

Pull kselftest fixes from Shuah Khan:
 "Fixes for various problems in test output, compile errors, and missing
  configs"

* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: vm: update .gitignore with new test
  selftests: memory-hotplug: silence test command echo
  selftests/futex: Fix line continuation in Makefile
  selftests: memfd: add config fragment for fuse
  selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
  selftests/android: Fix line continuation in Makefile
  selftest/vDSO: fix O=
  selftests: sync: missing CFLAGS while compiling

Continue the switch table detection whack-a-mole.  Add a check to
distinguish KASAN data reads from switch data reads.  The switch jump
tables in .rodata have relocations associated with them.

This fixes the following warning:

  crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com

Update .gitignore with new test.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

Silence the following command being printed while running test.

./mem-on-off-test.sh -r 2 && echo "selftests: memory-hotplug [PASS]" ||
echo "selftests: memory-hotplug [FAIL]"

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

The Makefile lacks a couple of line continuation backslashes
in an `if' clause, which produces an error when make versions
prior to 4.x are used for building the tests.

  $ make
  make[1]: Entering directory `/[...]/linux/tools/testing/selftests/futex'
  /bin/sh: -c: line 5: syntax error: unexpected end of file
  make[1]: *** [all] Error 1
  make[1]: Leaving directory `/[...]/linux/tools/testing/selftests/futex'
  make: *** [all] Error 2

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

Pull idr fixes from Matthew Wilcox:
 "One test-suite build fix for you and one run-time regression fix.

  The regression fix includes new tests to make sure they don't pop back
  up."

* 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax:
  idr: Fix handling of IDs above INT_MAX
  radix tree test suite: Fix build

Khalid reported that the kernel selftests are currently failing:

selftests: test_bpf.sh
========================================
test_bpf: [FAIL]
not ok 1..8 selftests:  test_bpf.sh [FAIL]

He bisected it to 6ce711f2750031d12cec91384ac5cfa0a485b60a ("idr: Make
1-based IDRs more efficient").

The root cause is doing a signed comparison in idr_alloc_u32() instead
of an unsigned comparison.  I went looking for any similar problems and
found a couple (which would each result in the failure to warn in two
situations that aren't supposed to happen).

I knocked up a few test-cases to prove that I was right and added them
to the test-suite.

Reported-by: Khalid Aziz <khalid.aziz@oracle.com>
Tested-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

Pull x86 fixes from Thomas Gleixner:
 "Yet another pile of melted spectrum related changes:

   - sanitize the array_index_nospec protection mechanism: Remove the
     overengineered array_index_nospec_mask_check() magic and allow
     const-qualified types as index to avoid temporary storage in a
     non-const local variable.

   - make the microcode loader more robust by properly propagating error
     codes. Provide information about new feature bits after micro code
     was updated so administrators can act upon.

   - optimizations of the entry ASM code which reduce code footprint and
     make the code simpler and faster.

   - fix the {pmd,pud}_{set,clear}_flags() implementations to work
     properly on paravirt kernels by removing the address translation
     operations.

   - revert the harmful vmexit_fill_RSB() optimization

   - use IBRS around firmware calls

   - teach objtool about retpolines and add annotations for indirect
     jumps and calls.

   - explicitly disable jumplabel patching in __init code and handle
     patching failures properly instead of silently ignoring them.

   - remove indirect paravirt calls for writing the speculation control
     MSR as these calls are obviously proving the same attack vector
     which is tried to be mitigated.

   - a few small fixes which address build issues with recent compiler
     and assembler versions"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
  KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
  objtool, retpolines: Integrate objtool with retpoline support more closely
  x86/entry/64: Simplify ENCODE_FRAME_POINTER
  extable: Make init_kernel_text() global
  jump_label: Warn on failed jump_label patching attempt
  jump_label: Explicitly disable jump labels in __init code
  x86/entry/64: Open-code switch_to_thread_stack()
  x86/entry/64: Move ASM_CLAC to interrupt_entry()
  x86/entry/64: Remove 'interrupt' macro
  x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
  x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
  x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
  x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
  objtool: Add module specific retpoline rules
  objtool: Add retpoline validation
  objtool: Use existing global variables for options
  x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
  x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
  x86/paravirt, objtool: Annotate indirect calls
  ...

Pull KVM fixes from Paolo Bonzini:
 "s390:
   - optimization for the exitless interrupt support that was merged in 4.16-rc1
   - improve the branch prediction blocking for nested KVM
   - replace some jump tables with switch statements to improve expoline performance
   - fixes for multiple epoch facility

  ARM:
   - fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs
   - make sure we can build 32-bit KVM/ARM with gcc-8.

  x86:
   - fixes for AMD SEV
   - fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup
   - fixes for async page fault migration
   - small optimization to PV TLB flush (new in 4.16-rc1)
   - syzkaller fixes

  Generic:
   - compiler warning fixes
   - syzkaller fixes
   - more improvements to the kvm_stat tool

  Two more small Spectre fixes are going to reach you via Ingo"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits)
  KVM: SVM: Fix SEV LAUNCH_SECRET command
  KVM: SVM: install RSM intercept
  KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command
  include: psp-sev: Capitalize invalid length enum
  crypto: ccp: Fix sparse, use plain integer as NULL pointer
  KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled
  x86/kvm: Make parse_no_xxx __init for kvm
  KVM: x86: fix backward migration with async_PF
  kvm: fix warning for non-x86 builds
  kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
  tools/kvm_stat: print 'Total' line for multiple events only
  tools/kvm_stat: group child events indented after parent
  tools/kvm_stat: separate drilldown and fields filtering
  tools/kvm_stat: eliminate extra guest/pid selection dialog
  tools/kvm_stat: mark private methods as such
  tools/kvm_stat: fix debugfs handling
  tools/kvm_stat: print error on invalid regex
  tools/kvm_stat: fix crash when filtering out all non-child trace events
  tools/kvm_stat: avoid 'is' for equality checks
  tools/kvm_stat: use a more pythonic way to iterate over dictionaries
  ...