Pull virtio updates from Rusty Russell:
 "OK, this has the big virtio 1.0 implementation, as specified by OASIS.

  On top of tht is the major rework of lguest, to use PCI and virtio
  1.0, to double-check the implementation.

  Then comes the inevitable fixes and cleanups from that work"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits)
  virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice.
  virtio_net: unconditionally define struct virtio_net_hdr_v1.
  tools/lguest: don't use legacy definitions for net device in example launcher.
  virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined.
  tools/lguest: use common error macros in the example launcher.
  tools/lguest: give virtqueues names for better error messages
  tools/lguest: more documentation and checking of virtio 1.0 compliance.
  lguest: don't look in console features to find emerg_wr.
  tools/lguest: don't start devices until DRIVER_OK status set.
  tools/lguest: handle indirect partway through chain.
  tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI)
  tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI)
  tools/lguest: rename virtio_pci_cfg_cap field to match spec.
  tools/lguest: fix features_accepted logic in example launcher.
  tools/lguest: handle device reset correctly in example launcher.
  virtual: Documentation: simplify and generalize paravirt_ops.txt
  lguest: remove NOTIFY call and eventfd facility.
  lguest: remove NOTIFY facility from demonstration launcher.
  lguest: use the PCI console device's emerg_wr for early boot messages.
  lguest: always put console in PCI slot #1.
  ...

Pull char / misc patches from Greg KH:
 "Here's the big char/misc driver update for 3.20-rc1.

  Lots of little things in here, all described in the changelog.
  Nothing major or unusual, except maybe the binder selinux stuff, which
  was all acked by the proper selinux people and they thought it best to
  come through this tree.

  All of this has been in linux-next with no reported issues for a while"

* tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  coresight: fix function etm_writel_cp14() parameter order
  coresight-etm: remove check for unknown Kconfig macro
  coresight: fixing CPU hwid lookup in device tree
  coresight: remove the unnecessary function coresight_is_bit_set()
  coresight: fix the debug AMBA bus name
  coresight: remove the extra spaces
  coresight: fix the link between orphan connection and newly added device
  coresight: remove the unnecessary replicator property
  coresight: fix the replicator subtype value
  pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl'
  mcb: Fix error path of mcb_pci_probe
  virtio/console: verify device has config space
  ti-st: clean up data types (fix harmless memory corruption)
  mei: me: release hw from reset only during the reset flow
  mei: mask interrupt set bit on clean reset bit
  extcon: max77693: Constify struct regmap_config
  extcon: adc-jack: Release IIO channel on driver remove
  extcon: Remove duplicated include from extcon-class.c
  Drivers: hv: vmbus: hv_process_timer_expiration() can be static
  Drivers: hv: vmbus: serialize Offer and Rescind offer
  ...

Pull USB patches from Greg KH:
 "Here's the big pull request for the USB driver tree for 3.20-rc1.

  Nothing major happening here, just lots of gadget driver updates, new
  device ids, and a bunch of cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits)
  usb: musb: fix device hotplug behind hub
  usb: dwc2: Fix a bug in reading the endpoint directions from reg.
  staging: emxx_udc: fix the build error
  usb: Retry port status check on resume to work around RH bugs
  Revert "usb: Reset USB-3 devices on USB-3 link bounce"
  uhci-hub: use HUB_CHAR_*
  usb: kconfig: replace PPC_OF with PPC
  ehci-pci: disable for Intel MID platforms (update)
  usb: gadget: Kconfig: use bool instead of boolean
  usb: musb: blackfin: remove incorrect __exit_p()
  USB: fix use-after-free bug in usb_hcd_unlink_urb()
  ehci-pci: disable for Intel MID platforms
  usb: host: pci_quirks: joing string literals
  USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)
  USB: usbfs: allow URBs to be reaped after disconnection
  cdc-acm: kill unnecessary messages
  cdc-acm: add sanity checks
  usb: phy: phy-generic: Fix USB PHY gpio reset
  usb: dwc2: fix USB core dependencies
  usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()
  ...

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are two reverts related to system suspend breakage by one of a
  recent commits, a fix for a recently introduced bug in devfreq and a
  bunch of other things that didn't make it into my previous pull
  request, but otherwise are ready to go.

  Specifics:

   - Revert two ACPI EC driver commits, one that broke system suspend on
     Acer Aspire S5 and one that depends on it (Rafael J Wysocki).

   - Fix a typo leading to an incorrect check in the exynos-ppmu devfreq
     driver (Dan Carpenter).

   - Add support for one more Broadwell CPU model to intel_idle (Len Brown).

   - Fix an obscure problem with state transitions related to interrupts
     in the speedstep-smi cpufreq driver (Mikulas Patocka).

   - Remove some unnecessary messages related to the "out of memory"
     condition from the core PM code (Quentin Lambert).

   - Update turbostat parameters and documentation, add support for one
     more Broadwell CPU model to it and modify it to skip printing
     disabled package C-states (Len Brown)"

* tag 'pm+acpi-3.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / devfreq: event: testing the wrong variable
  cpufreq: speedstep-smi: enable interrupts when waiting
  PM / OPP / clk: Remove unnecessary OOM message
  Revert "ACPI / EC: Add query flushing support"
  Revert "ACPI / EC: Add GPE reference counting debugging messages"
  tools/power turbostat: support additional Broadwell model
  intel_idle: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states

* pm-cpufreq:
  cpufreq: speedstep-smi: enable interrupts when waiting

* pm-cpuidle:
  intel_idle: support additional Broadwell model

* pm-devfreq:
  PM / devfreq: event: testing the wrong variable

* pm-opp:
  PM / OPP / clk: Remove unnecessary OOM message

* pm-tools:
  tools/power turbostat: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This is from all the non-PCI parts of the spec.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

We were activating them with the virtqueues, and that's not allowed.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>