linux.git/tools, branch v3.9-rc1

Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag

2013-03-03T20:06:09+00:00

Pull new ImgTec Meta architecture from James Hogan:
 "This adds core architecture support for Imagination's Meta processor
  cores, followed by some later miscellaneous arch/metag cleanups and
  fixes which I kept separate to ease review:

   - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
   - A few fixes all over, particularly for symbol prefixes
   - A few privilege protection fixes
   - Several cleanups (setup.c includes, split out a lot of
     metag_ksyms.c)
   - Fix some missing exports
   - Convert hugetlb to use vm_unmapped_area()
   - Copy device tree to non-init memory
   - Provide dma_get_sgtable()"

* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  genksyms: fix metag symbol prefix on crc symbols
  metag: hugetlb: convert to vm_unmapped_area()
  metag: export clear_page and copy_page
  metag: export metag_code_cache_flush_all
  metag: protect more non-MMU memory regions
  metag: make TXPRIVEXT bits explicit
  metag: kernel/setup.c: sort includes
  perf: Enable building perf tools for Meta
  metag: add boot time LNKGET/LNKSET check
  metag: add __init to metag_cache_probe()
  ...

perf: Enable building perf tools for Meta

2013-03-02T20:09:57+00:00

Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf
tools can be built for Meta.

Signed-off-by: James Hogan 
Cc: Peter Zijlstra 
Cc: Paul Mackerras 
Cc: Ingo Molnar 
Cc: Arnaldo Carvalho de Melo

Merge tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2013-03-02T15:58:56+00:00

Pull new ARC architecture from Vineet Gupta:
 "Initial ARC Linux port with some fixes on top for 3.9-rc1:

  I would like to introduce the Linux port to ARC Processors (from
  Synopsys) for 3.9-rc1.  The patch-set has been discussed on the public
  lists since Nov and has received a fair bit of review, specially from
  Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb...

  The arch bits are in arch/arc, some asm-generic changes (acked by
  Arnd), a minor change to PARISC (acked by Helge).

  The series is a touch bigger for a new port for 2 main reasons:

   1. It enables a basic kernel in first sub-series and adds
      ptrace/kgdb/.. later

   2. Some of the fallout of review (DeviceTree support, multi-platform-
      image support) were added on top of orig series, primarily to
      record the revision history.

  This updated pull request additionally contains

   - fixes due to our GNU tools catching up with the new syscall/ptrace
     ABI

   - some (minor) cross-arch Kconfig updates."

* tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits)
  ARC: split elf.h into uapi and export it for userspace
  ARC: Fixup the current ABI version
  ARC: gdbserver using regset interface possibly broken
  ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window
  ARC: make a copy of flat DT
  ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"
  ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled
  ARC: Fix pt_orig_r8 access
  ARC: [3.9] Fallout of hlist iterator update
  ARC: 64bit RTSC timestamp hardware issue
  ARC: Don't fiddle with non-existent caches
  ARC: Add self to MAINTAINERS
  ARC: Provide a default serial.h for uart drivers needing BASE_BAUD
  ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux
  ARC: [Review] Multi-platform image #8: platform registers SMP callbacks
  ARC: [Review] Multi-platform image #7: SMP common code to use callbacks
  ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional
  ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core
  ARC: [Review] Multi-platform image #4: Isolate platform headers
  ARC: [Review] Multi-platform image #3: switch to board callback
  ...

hlist: drop the node parameter from iterators

2013-02-28T03:10:24+00:00

I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin 
Acked-by: Paul E. McKenney 
Signed-off-by: Sasha Levin 
Cc: Wu Fengguang 
Cc: Marcelo Tosatti 
Cc: Gleb Natapov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

selftests: add a simple doc

2013-02-28T03:10:24+00:00

This change adds a little documentation to the tests under
tools/testing/selftests/, based on akpm's explanation.

[akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt]
Signed-off-by: Jeremy Kerr 
Cc: Dave Young 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tools/testing/selftests/Makefile: rearrange targets

2013-02-28T03:10:24+00:00

Do it one-per-line to reduce patch conflict pain.

Cc: Dave Young 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

selftests/efivarfs: add create-read test

2013-02-28T03:10:24+00:00

Test that reads from a newly-created efivarfs file (with no data written)
will return EOF.

Signed-off-by: Jeremy Kerr 
Cc: Matt Fleming 
Cc: Lingzhu Xiang 
Cc: Dave Young 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

selftests/efivarfs: add empty file creation test

2013-02-28T03:10:24+00:00

Signed-off-by: Jeremy Kerr 
Cc: Matt Fleming 
Cc: Lingzhu Xiang 
Cc: Dave Young 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

selftests: add tests for efivarfs

2013-02-28T03:10:24+00:00

This change adds a few initial efivarfs tests to the
tools/testing/selftests directory.

The open-unlink test is based on code from Lingzhu Xiang.

Signed-off-by: Jeremy Kerr 
Cc: Matt Fleming 
Cc: Lingzhu Xiang 
Cc: Dave Young 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

2013-02-25T23:43:21+00:00

Pull ktest update from Steven Rostedt:
 "Added ability to have all builds test warnings.

  Fixed failing reboot when the reboot produces a non fatal error.

  Config reading fixes and other cleanups"

* tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Remove indexes from warnings check
  ktest: Ignore warnings during reboot
  ktest: Search for linux banner for successful reboot
  ktest: Add make_warnings_file and process full warnings
  ktest: Allow a test option to use its default option
  ktest: Strip off '\n' when reading which files were modified
  ktest: Do not require CONSOLE for build or install bisects