linux.git/tools/testing, branch v5.3-rc8

tc-testing: don't hardcode 'ip' in nsPlugin.py

2019-09-01T06:47:25+00:00

the following tdc test fails on Fedora:

 # ./tdc.py -e 2638
  -- ns/SubPlugin.__init__
 Test 2638: Add matchall and try to get it
 -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact"
 -----> prepare stage *** Error message: "/bin/sh: ip: command not found"
 returncode 127; expected [0]
 -----> prepare stage *** Aborting test run.

Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9
("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is
correctly resolved to the value we have in tdc_config.py.

 # ./tdc.py -e 2638
  -- ns/SubPlugin.__init__
 Test 2638: Add matchall and try to get it
 All test results:
 1..1
 ok 1 2638 - Add matchall and try to get it

Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc")
Reported-by: Hangbin Liu 
Signed-off-by: Davide Caratti 
Acked-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-08-27T17:12:48+00:00

Pull networking fixes from David Miller:

 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya
    Leoshkevich.

 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for
    SMC from Jason Baron.

 3) ipv6_mc_may_pull() should return 0 for malformed packets, not
    -EINVAL. From Stefano Brivio.

 4) Don't forget to unpin umem xdp pages in error path of
    xdp_umem_reg(). From Ivan Khoronzhuk.

 5) Fix sta object leak in mac80211, from Johannes Berg.

 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2
    switches. From Florian Fainelli.

 7) Revert DMA sync removal from r8169 which was causing regressions on
    some MIPS Loongson platforms. From Heiner Kallweit.

 8) Use after free in flow dissector, from Jakub Sitnicki.

 9) Fix NULL derefs of net devices during ICMP processing across
    collect_md tunnels, from Hangbin Liu.

10) proto_register() memory leaks, from Zhang Lin.

11) Set NLM_F_MULTI flag in multipart netlink messages consistently,
    from John Fastabend.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  r8152: Set memory to all 0xFFs on failed reg reads
  openvswitch: Fix conntrack cache with timeout
  ipv4: mpls: fix mpls_xmit for iptunnel
  nexthop: Fix nexthop_num_path for blackhole nexthops
  net: rds: add service level support in rds-info
  net: route dump netlink NLM_F_MULTI flag missing
  s390/qeth: reject oversized SNMP requests
  sock: fix potential memory leak in proto_register()
  MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
  xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
  ipv4/icmp: fix rt dst dev null pointer dereference
  openvswitch: Fix log message in ovs conntrack
  bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0
  bpf: fix use after free in prog symbol exposure
  bpf: fix precision tracking in presence of bpf2bpf calls
  flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH
  Revert "r8169: remove not needed call to dma_sync_single_for_device"
  ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev
  net/ncsi: Fix the payload copying for the request coming from Netlink
  qed: Add cleanup in qed_slowpath_start()
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2019-08-24T00:34:11+00:00

Daniel Borkmann says:

====================
pull-request: bpf 2019-08-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei.

2) Fix a use-after-free in prog symbol exposure, from Daniel.

3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya.

4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan.

5) Fix a potential use-after-free on flow dissector detach, from Jakub.

6) Fix bpftool to close prog fd after showing metadata, from Quentin.

7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders.
====================

Signed-off-by: David S. Miller

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2019-08-21T18:48:38+00:00

Pull KVM fixes from Paolo Bonzini:
 "A couple bugfixes, and mostly selftests changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  selftests/kvm: make platform_info_test pass on AMD
  Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"
  selftests: kvm: fix state save/load on processors without XSAVE
  selftests: kvm: fix vmx_set_nested_state_test
  selftests: kvm: provide common function to enable eVMCS
  selftests: kvm: do not try running the VM in vmx_set_nested_state_test
  KVM: x86: svm: remove redundant assignment of var new_entry
  MAINTAINERS: add KVM x86 reviewers
  MAINTAINERS: change list for KVM/s390
  kvm: x86: skip populating logical dest map if apic is not sw enabled

selftests/kvm: make platform_info_test pass on AMD

2019-08-21T17:08:18+00:00

test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state
is undefined after that so an attempt to launch this guest again from
test_msr_platform_info_enabled() fails. Reorder the tests to make test
pass.

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: Paolo Bonzini

selftests/bpf: install files test_xdp_vlan.sh

2019-08-21T15:06:04+00:00

When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't
find file test_xdp_vlan.sh.

 # selftests: bpf: test_xdp_vlan_mode_generic.sh
 # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such
 file or directory

Rework so that test_xdp_vlan.sh gets installed, added to the variable
TEST_PROGS_EXTENDED.

Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh")
Signed-off-by: Anders Roxell 
Acked-by: Jesper Dangaard Brouer 
Signed-off-by: Daniel Borkmann

selftests/bpf: add config fragment BPF_JIT

2019-08-21T15:05:06+00:00

When running test_kmod.sh the following shows up

 # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory
 cannot: stat_/proc/sys/net/core/bpf_jit_enable #
 # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory
 cannot: stat_/proc/sys/net/core/bpf_jit_harden #

Rework to enable CONFIG_BPF_JIT to solve "No such file or directory"

Signed-off-by: Anders Roxell 
Signed-off-by: Daniel Borkmann

selftests/bpf: fix test_btf_dump with O=

2019-08-21T15:00:59+00:00

test_btf_dump fails when run with O=, because it needs to access source
files and assumes they live in ./progs/, which is not the case in this
scenario.

Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the
test directory. Since kselftest does not preserve directory structure,
adjust the test to look in ./progs/ and then in ./.

Signed-off-by: Ilya Leoshkevich 
Signed-off-by: Daniel Borkmann

selftests/bpf: fix test_cgroup_storage on s390

2019-08-21T14:55:01+00:00

test_cgroup_storage fails on s390 with an assertion failure: packets are
dropped when they shouldn't. The problem is that BPF_DW packet count is
accessed as BPF_W with an offset of 0, which is not correct on
big-endian machines.

Since the point of this test is not to verify narrow loads/stores,
simply use BPF_DW when working with packet counts.

Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test")
Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage")
Signed-off-by: Ilya Leoshkevich 
Signed-off-by: Daniel Borkmann

selftests: kvm: fix state save/load on processors without XSAVE

2019-08-21T08:27:35+00:00

state_test and smm_test are failing on older processors that do not
have xcr0.  This is because on those processor KVM does provide
support for KVM_GET/SET_XSAVE (to avoid having to rely on the older
KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS.

Signed-off-by: Paolo Bonzini