Pull KVM updates from Paolo Bonzini:
 "ARM:
   - support for SVE and Pointer Authentication in guests
   - PMU improvements

  POWER:
   - support for direct access to the POWER9 XIVE interrupt controller
   - memory and performance optimizations

  x86:
   - support for accessing memory not backed by struct page
   - fixes and refactoring

  Generic:
   - dirty page tracking improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits)
  kvm: fix compilation on aarch64
  Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU"
  kvm: x86: Fix L1TF mitigation for shadow MMU
  KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible
  KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device
  KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing"
  KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs
  kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete
  tests: kvm: Add tests for KVM_SET_NESTED_STATE
  KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state
  tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID
  tests: kvm: Add tests to .gitignore
  KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
  KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one
  KVM: Fix the bitmap range to copy during clear dirty
  KVM: arm64: Fix ptrauth ID register masking logic
  KVM: x86: use direct accessors for RIP and RSP
  KVM: VMX: Use accessors for GPRs outside of dedicated caching logic
  KVM: x86: Omit caching logic for always-available GPRs
  kvm, x86: Properly check whether a pfn is an MMIO or not
  ...

Pull more kselftest updates from Shuah Khan:

 - kselftest framework bpf build/test workflow regression fix

 - Fix to kselftest install to use default install path

 - Fix to kselftest KBUILD_OUTPUT builds to not clutter main
   KBUILD_OUTPUT directory with selftest objects

 - .gitignore fixes (Kelsey Skunberg)

 - rseq selftests updates (Mathieu Desnoyers and Martin Schwidefsky)

   They change the per-architecture pre-abort signatures to ensure those
   are valid trap instructions.

   The way exit points are presented to debuggers is enhanced, ensuring
   all exit points are present, so debuggers don't have to disassemble
   rseq critical section to properly skip over them.

   Discussions with the glibc community is reaching a consensus of
   exposing a __rseq_handled symbol from glibc to coexist with rseq
   early adopters. Update the rseq selftest code to expose and use this
   symbol.

   Support for compiling asm goto with clang is added with the
   "-no-integrated-as" compiler switch, similarly to the top level
   kernel Makefile.

 - kselftest Makefile test run output refactoring and making test output
   TAP13 compliant from Kees Cook:

   This re-factors the selftest Makefiles to extract the test running
   logic to be reused between "run_tests" and "emit_tests", while also
   fixing up the test output to be TAP version 13 compliant:
	- added "plan" line
	- fixed result line syntax
	- moved all test output to be "# "-prefixed as TAP "diagnostic"
	  lines

   The prefixing code includes a fallback mode for limited execution
   environments.

   Additionally, the plan lines are fixed for all callers of
   kselftest.h.

* tag 'linux-kselftest-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests: avoid KBUILD_OUTPUT dir cluttering with selftest objects
  selftests: drivers: Create .gitignore to include /dma-buf/udmabuf
  selftests: pidfd: Create .gitignore to include pidfd_test
  selftests: fix bpf build/test workflow regression when KBUILD_OUTPUT is set
  selftests: fix install target to use default install path
  rseq/selftests: add -no-integrated-as for clang
  rseq/selftests: mips: use break instruction for RSEQ_SIG
  rseq/selftests: powerpc code signature: generate valid instructions
  rseq/selftests: aarch64 code signature: handle big-endian environment
  rseq/selftests: arm: use udf instruction for RSEQ_SIG
  rseq/selftests: s390: use trap4 for RSEQ_SIG
  rseq/selftests: x86: use ud1 instruction as RSEQ_SIG opcode
  rseq/selftests: s390: use jg instruction for jumps outside of the asm
  rseq/selftests: Use __rseq_handled symbol to coexist with glibc
  rseq/selftests: Introduce __rseq_cs_ptr_array, rename __rseq_table to __rseq_cs
  rseq/selftests: Add __rseq_exit_point_array section for debuggers
  rseq/selftests: x86: Work-around bogus gcc-8 optimisation
  selftests: Add test plan API to kselftest.h and adjust callers
  selftests: Remove KSFT_TAP_LEVEL
  selftests: Move test output to diagnostic lines
  ...

Pull libnvdimm updates from Dan Williams:
 "Just a small collection of fixes this time around.

  The new virtio-pmem driver is nearly ready, but some last minute
  device-mapper acks and virtio questions made it prudent to await v5.3.

  Other major topics that were brewing on the linux-nvdimm mailing list
  like sub-section hotplug, and other devm_memremap_pages() reworks will
  go upstream through Andrew's tree.

  Summary:

   - Fix a long standing namespace label corruption scenario when
     re-provisioning capacity for a namespace.

   - Restore the ability of the dax_pmem module to be built-in.

   - Harden the build for the 'nfit_test' unit test modules so that the
     userspace test harness can ensure all required test modules are
     available"

* tag 'libnvdimm-fixes-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  drivers/dax: Allow to include DEV_DAX_PMEM as builtin
  libnvdimm/namespace: Fix label tracking error
  tools/testing/nvdimm: add watermarks for dax_pmem* modules
  dax/pmem: Fix whitespace in dax_pmem

Pull more ktest updates from Steven Rostedt:

 - Add support for grub2bls boot loader

 - Show name and test iteration number in error message sent in mail

 - Minor fixes and clean ups

* tag 'ktest-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: update sample.conf for grub2bls
  ktest: remove get_grub2_index
  ktest: pass KERNEL_VERSION to POST_KTEST
  ktest: introduce grub2bls REBOOT_TYPE option
  ktest: cleanup get_grub_index
  ktest: introduce _get_grub_index

Pull tracing updates from Steven Rostedt:
 "The major changes in this tracing update includes:

   - Removal of non-DYNAMIC_FTRACE from 32bit x86

   - Removal of mcount support from x86

   - Emulating a call from int3 on x86_64, fixes live kernel patching

   - Consolidated Tracing Error logs file

  Minor updates:

   - Removal of klp_check_compiler_support()

   - kdb ftrace dumping output changes

   - Accessing and creating ftrace instances from inside the kernel

   - Clean up of #define if macro

   - Introduction of TRACE_EVENT_NOP() to disable trace events based on
     config options

  And other minor fixes and clean ups"

* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  x86: Hide the int3_emulate_call/jmp functions from UML
  livepatch: Remove klp_check_compiler_support()
  ftrace/x86: Remove mcount support
  ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
  tracing: Simplify "if" macro code
  tracing: Fix documentation about disabling options using trace_options
  tracing: Replace kzalloc with kcalloc
  tracing: Fix partial reading of trace event's id file
  tracing: Allow RCU to run between postponed startup tests
  tracing: Fix white space issues in parse_pred() function
  tracing: Eliminate const char[] auto variables
  ring-buffer: Fix mispelling of Calculate
  tracing: probeevent: Fix to make the type of $comm string
  tracing: probeevent: Do not accumulate on ret variable
  tracing: uprobes: Re-enable $comm support for uprobe events
  ftrace/x86_64: Emulate call function while updating in breakpoint handler
  x86_64: Allow breakpoints to emulate call instructions
  x86_64: Add gap to int3 to allow for call emulation
  tracing: kdb: Allow ftdump to skip all but the last few entries
  tracing: Add trace_total_entries() / trace_total_entries_cpu()
  ...

The kernel has only two users of proc_do_large_bitmap(), the kernel CPU
watchdog, and the ip_local_reserved_ports.  Refer to watchdog_cpumask
and ip_local_reserved_ports in Documentation for further details on
these.  When you input a large buffer into these, when it is larger than
PAGE_SIZE- 1, the input data gets misparsed, and the user get
incorrectly informed that the desired input value was set.  This commit
implements a test which mimics and exploits that use case, it uses a
bitmap size, as in the watchdog case.  The bitmap is used to test the
bitmap proc handler, proc_do_large_bitmap().

The next commit fixes this issue.

[akpm@linux-foundation.org: move proc_do_large_bitmap() export to EOF]
[mcgrof@kernel.org: use new target description for backward compatibility]
[mcgrof@kernel.org: augment test number to 50, ran into issues with bash string comparisons when testing up to 50 cases.]
[mcgrof@kernel.org: introduce and use verify_diff_proc_file() to use diff]
[mcgrof@kernel.org: use mktemp for tmp file]
[mcgrof@kernel.org: merge shell test and C code]
[mcgrof@kernel.org: commit log love]
[mcgrof@kernel.org: export proc_do_large_bitmap() to allow for the test
[mcgrof@kernel.org: check for the return value when writing to the proc file]
Link: http://lkml.kernel.org/r/20190320222831.8243-6-mcgrof@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On old kernels older new test knobs implemented on the test_sysctl
module may not be available.  This is expected, and the selftests test
scripts should be able to run without failures on older kernels.

Generalize a solution so that we test for each required test target file
for each test by requiring each test description to annotate their
respective test target file.  If the target file does not exist, we skip
the test gracefully.

Link: http://lkml.kernel.org/r/20190320222831.8243-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When verify_diff_w() is used we care about the result, not the verbose
output, and although we use -q, that still gives us a chatty message
about if the files differ or not.  Since verify_diff_w() uses stdinput
the chatty message says whether or not "-" matches the target file, and
this just seems rather odd.  Better to just ignore that messsage all
together, what we really care about i sthe results, the return value and
we check for that.

Link: http://lkml.kernel.org/r/20190320222831.8243-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the test script checks for the existence of the sysctl test
module's directory path prior to loading it.  We must first try to load
the module prior to checking for that path.  This fixes the order for
the load / test.

Link: http://lkml.kernel.org/r/20190320222831.8243-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "sysctl: add pending proc_do_large_bitmap fix".

Eric sent a fix out for proc_do_large_bitmap() last month for when using
a large input buffer.  After patch review a test case for the issue was
built and submitted.  I noticed there were a few issues with the tests,
but instead of just asking Eric to address them I've taken care of them
and ammended the commit where necessary.  There's a few issues he
reported which I also address and fix in this series.

Since we *do* expect users of these scripts to also use them on older
kernels, I've also addressed not breaking calling the script for them,
and gives us an easy way to easily extend our tests cases for future
kernels as well.

Before anyone considers these for stable as minor fixes, I'd recommend
we also address the discrepancy on the read side of things: modify the
test script to use diff against the target file instead of using the
temp file.

This patch (of 6):

We already call test_reqs(), no need to call it twice.

Link: http://lkml.kernel.org/r/20190320222831.8243-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>