linux.git/tools/testing/selftests/timers, branch v4.10

Merge tag 'linux-kselftest-4.10-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2016-12-15T22:17:32+00:00

Pull kselftest updates from Shuah Khan:
 "This update consists of:

   - new tests to exercise the Sync Kernel Infrastructure. These tests
     are part of a battery of Android libsync tests and are re-written
     to test the new sync user-space interfaces from Emilio López, and
     Gustavo Padovan.

   - test to run hw-independent mock tests for i915.ko from Chris Wilson

   - a new gpio test case from Bamvor Jian Zhang

   - missing gitignore additions"

* tag 'linux-kselftest-4.10-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest/gpio: add gpio test case
  selftest: sync: improve assert() failure message
  kselftests: Exercise hw-independent mock tests for i915.ko
  selftests: add missing gitignore files/dirs
  selftests: add missing set-tz to timers .gitignore
  selftest: sync: stress test for merges
  selftest: sync: stress consumer/producer test
  selftest: sync: stress test for parallelism
  selftest: sync: wait tests for sw_sync framework
  selftest: sync: merge tests for sw_sync framework
  selftest: sync: fence tests for sw_sync framework
  selftest: sync: basic tests for sw_sync framework

selftests: add missing set-tz to timers .gitignore

2016-12-08T15:51:14+00:00

set-tz is missing from timers/.gitignore. Add it.

Signed-off-by: Shuah Khan

selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"

2016-11-29T17:02:57+00:00

Trivial fix to spelling mistake

Signed-off-by: Colin Ian King 
Signed-off-by: John Stultz 
Cc: Prarit Bhargava 
Cc: Richard Cochran 
Cc: Shuah Khan 
Link: http://lkml.kernel.org/r/1480372524-15181-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner

selftests/timers: Add missing error code assignment before test

2016-09-20T15:00:28+00:00

In order to work, the 'err' return value has to be updated otherwise the
test can never be true.

Signed-off-by: Christophe JAILLET 
Acked-by: John Stultz 
Signed-off-by: Shuah Khan

Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-08-05T13:48:22+00:00

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

rtc: rtctest: Change no IRQ detection for RTC_IRQP_SET

2016-06-26T21:43:54+00:00

A call to ioctl(..., RTC_IRQP_SET, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.

Signed-off-by: Andrey Smirnov 
Signed-off-by: Alexandre Belloni

rtc: rtctest: Change no IRQ detection for RTC_IRQP_READ

2016-06-26T21:43:49+00:00

A call to ioctl(..., RTC_IRQP_READ, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.

Signed-off-by: Andrey Smirnov 
Signed-off-by: Alexandre Belloni

rtc: rtctest: Change alarm IRQ support detection

2016-06-26T21:43:44+00:00

For old style drivers, call a call to ioctl(..., RTC_ALM_SET, ...):

    - char/ds1302.c will always return -EINVAL
    - char/genrtc.c: will always return -EINVAL
    - char/rtc.c will succeed regardless if IRQs are supported or not
    - char/efirtc.c will always return -EINVAL
    - input/misc/hp_sdc_rtc.c ... that ioctl code is a good lesson about
      ifdefing code out and punting implementation ... and it will
      always return -EINVAL

For new style rtc drivers, a call to ioctl(..., RTC_ALM_SET, ...) never
results in a call to __rtc_set_alarm, since struct rtc_wkalarm passed to
rtc_set_alarm has 'enabled' field set to 0. This means that
rtc->ops->set_alarm driver hook is never called in that ioctl. Since no
driver code interaction happens as a part of that call, using its
results to ascertain properties of the driver is not going to work. To
remedy this - use the result of RTC_AIE_ON to make the judgement.

This patch also changes ENOTTY to EINVAL as an error code value that
would tell us that IRQs are not supported. There are three reason for
this:

 - As mentioned above old style driver never returns ENOTTY for this
   ioctl

 - In it's code __rtc_set_alarm() returns -EINVAL if rtc->ops->set_alarm
   method is not provided by the driver, so one reason for change is to
   be consistent with that code path.

 - A call to ioctl(..., RTC_UIE_ON, ...) will result in a call to
   rtc_update_irq_enable() and then __rtc_set_alarm(), which, if IRQs
   are not supported by the driver, will result in a non-zero error
   code. Returning ENOTTY in that case would:

   	 a) Not be consistent with other codepaths of
   	 rtc_update_irq_enable, for example the check of
   	 rtc->uie_unsupported

	 b) Would break update IRQ emulation code since that codpath
	 expects EINVAL

	 c) Would break test's logic for feature support detection in
	 the case of RTC_UIE_ON ioctl

Signed-off-by: Andrey Smirnov 
Signed-off-by: Alexandre Belloni

kselftests: timers: Add set-tz test case

2016-06-02T22:39:56+00:00

Mika Westerberg reported a erroneous change in the error
checking of settimeofday, so I wanted to add a test to ensure
we don't trip over this again.

Cc: Mika Westerberg 
Cc: Baolin Wang 
Cc: Thomas Gleixner 
Cc: Shuah Khan 
Cc: Arnd Bergmann 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Signed-off-by: John Stultz 
Signed-off-by: Shuah Khan

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-03-18T04:38:27+00:00

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  drivers/rtc: broken link fix
  drm/i915 Fix typos in i915_gem_fence.c
  Docs: fix missing word in REPORTING-BUGS
  lib+mm: fix few spelling mistakes
  MAINTAINERS: add git URL for APM driver
  treewide: Fix typo in printk