linux.git/tools/testing/selftests/net/forwarding/Makefile, branch v6.5

selftests: net: add tc flower cfm test

2023-06-13T00:01:45+00:00

New cfm flower test case is added to the net forwarding selfttests.

Example output:

 # ./tc_flower_cfm.sh p1 p2
 TEST: CFM opcode match test                                         [ OK ]
 TEST: CFM level match test                                          [ OK ]
 TEST: CFM opcode and level match test                               [ OK ]

Signed-off-by: Zahari Doychev 
Reviewed-by: Ido Schimmel 
Signed-off-by: Jakub Kicinski

selftests: forwarding: Add layer 2 miss test cases

2023-05-31T06:37:01+00:00

Add test cases to verify that the bridge driver correctly marks layer 2
misses only when it should and that the flower classifier can match on
this metadata.

Example output:

 # ./tc_flower_l2_miss.sh
 TEST: L2 miss - Unicast                                             [ OK ]
 TEST: L2 miss - Multicast (IPv4)                                    [ OK ]
 TEST: L2 miss - Multicast (IPv6)                                    [ OK ]
 TEST: L2 miss - Link-local multicast (IPv4)                         [ OK ]
 TEST: L2 miss - Link-local multicast (IPv6)                         [ OK ]
 TEST: L2 miss - Broadcast                                           [ OK ]

Signed-off-by: Ido Schimmel 
Reviewed-by: Nikolay Aleksandrov 
Signed-off-by: Jakub Kicinski

selftests: forwarding: add a test for MAC Merge layer

2023-04-21T03:03:21+00:00

The MAC Merge layer (IEEE 802.3-2018 clause 99) does all the heavy
lifting for Frame Preemption (IEEE 802.1Q-2018 clause 6.7.2), a TSN
feature for minimizing latency.

Preemptible traffic is different on the wire from normal traffic in
incompatible ways. If we send a preemptible packet and the link partner
doesn't support preemption, it will drop it as an error frame and we
will never know. The MAC Merge layer has a control plane of its own,
which can be manipulated (using ethtool) in order to negotiate this
capability with the link partner (through LLDP).

Actually the TLV format for LLDP solves this problem only partly,
because both partners only advertise:
- if they support preemption (RX and TX)
- if they have enabled preemption (TX)
so we cannot tell the link partner what to do - we cannot force it to
enable reception of our preemptible packets.

That is fully solved by the verification feature, where the local device
generates some small probe frames which look like preemptible frames
with no useful content, and the link partner is obliged to respond to
them if it supports the standard. If the verification times out, we know
that preemption isn't active in our TX direction on the link.

Having clarified the definition, this selftest exercises the manual
(ethtool) configuration path of 2 link partners (with and without
verification), and the LLDP code path, using the openlldp project.

The test also verifies the TX activity of the MAC Merge layer by
sending traffic through a traffic class configured as preemptible
(using mqprio). There isn't a good way to make this really portable
(user space cannot find out how many traffic classes there are for
a device), but I chose num_tc 4 here, that should work reasonably well.
I also know that some devices (stmmac) only permit TXQ0 to be
preemptible, so this is why PREEMPTIBLE_PRIO was strategically chosen
as 0. Even if other hardware is more configurable, this test should
cover the baseline.

This is not really a "forwarding" selftest, but I put it near the other
"ethtool" selftests.

$ ./ethtool_mm.sh eno0 swp0
TEST: Manual configuration with verification: eno0 to swp0          [ OK ]
TEST: Manual configuration with verification: swp0 to eno0          [ OK ]
TEST: Manual configuration without verification: eno0 to swp0       [ OK ]
TEST: Manual configuration without verification: swp0 to eno0       [ OK ]
TEST: Manual configuration with failed verification: eno0 to swp0   [ OK ]
TEST: Manual configuration with failed verification: swp0 to eno0   [ OK ]
TEST: LLDP                                                          [ OK ]

Signed-off-by: Vladimir Oltean 
Signed-off-by: Jakub Kicinski

selftests: forwarding: add tunnel_key "nofrag" test case

2023-03-31T06:24:24+00:00

Add a selftest that configures metadata tunnel encapsulation using the TC
"tunnel_key" action: it includes a test case for setting "nofrag" flag.

Example output:

 # selftests: net/forwarding: tc_tunnel_key.sh
 # TEST: tunnel_key nofrag (skip_hw)                                   [ OK ]
 # INFO: Could not test offloaded functionality
 ok 1 selftests: net/forwarding: tc_tunnel_key.sh

Signed-off-by: Davide Caratti 
Signed-off-by: Jakub Kicinski

selftests: forwarding: bridge_mdb_max: Add a new selftest

2023-02-06T08:48:27+00:00

Add a suite covering mcast_n_groups and mcast_max_groups bridge features.

Signed-off-by: Petr Machata 
Acked-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller

selftests: forwarding: Add bridge MDB test

2022-12-12T23:33:37+00:00

Add a selftests that includes the following test cases:

1. Configuration tests. Both valid and invalid configurations are
   tested across all entry types (e.g., L2, IPv4).

2. Forwarding tests. Both host and port group entries are tested across
   all entry types.

3. Interaction between user installed MDB entries and IGMP / MLD control
   packets.

Example output:

INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4)                [ OK ]
TEST: Common host entries configuration tests (IPv6)                [ OK ]
TEST: Common host entries configuration tests (L2)                  [ OK ]

INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G))   [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G))   [ OK ]
TEST: IPv4 (*, G) port group entries configuration tests            [ OK ]
TEST: IPv6 (*, G) port group entries configuration tests            [ OK ]

INFO: # Port group entries configuration tests - (S, G)
TEST: Common port group entries configuration tests (IPv4 (S, G))   [ OK ]
TEST: Common port group entries configuration tests (IPv6 (S, G))   [ OK ]
TEST: IPv4 (S, G) port group entries configuration tests            [ OK ]
TEST: IPv6 (S, G) port group entries configuration tests            [ OK ]

INFO: # Port group entries configuration tests - L2
TEST: Common port group entries configuration tests (L2 (*, G))     [ OK ]
TEST: L2 (*, G) port group entries configuration tests              [ OK ]

INFO: # Forwarding tests
TEST: IPv4 host entries forwarding tests                            [ OK ]
TEST: IPv6 host entries forwarding tests                            [ OK ]
TEST: L2 host entries forwarding tests                              [ OK ]
TEST: IPv4 port group "exclude" entries forwarding tests            [ OK ]
TEST: IPv6 port group "exclude" entries forwarding tests            [ OK ]
TEST: IPv4 port group "include" entries forwarding tests            [ OK ]
TEST: IPv6 port group "include" entries forwarding tests            [ OK ]
TEST: L2 port entries forwarding tests                              [ OK ]

INFO: # Control packets tests
TEST: IGMPv3 MODE_IS_INCLUE tests                                   [ OK ]
TEST: MLDv2 MODE_IS_INCLUDE tests                                   [ OK ]

Signed-off-by: Ido Schimmel 
Acked-by: Nikolay Aleksandrov 
Signed-off-by: Jakub Kicinski

selftests: forwarding: Rename bridge_mdb test

2022-12-12T23:33:37+00:00

The test is only concerned with host MDB entries and not with MDB
entries as a whole. Rename the test to reflect that.

Subsequent patches will add a more general test that will contain the
test cases for host MDB entries and remove the current test.

Signed-off-by: Ido Schimmel 
Acked-by: Nikolay Aleksandrov 
Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-07-14T22:27:35+00:00

include/net/sock.h
  310731e2f161 ("net: Fix data-races around sysctl_mem.")
  e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"")
https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/

net/ipv4/fib_semantics.c
  747c14307214 ("ip: fix dflt addr selection for connected nexthop")
  d62607c3fe45 ("net: rename reference+tracking helpers")

net/tls/tls.h
include/net/tls.h
  3d8c51b25a23 ("net/tls: Check for errors in tls_device_init")
  587903142308 ("tls: create an internal header")

Signed-off-by: Jakub Kicinski

selftests: forwarding: Install no_forwarding.sh

2022-07-09T03:30:57+00:00

When using the Makefile from tools/testing/selftests/net/forwarding/
all tests should be installed. Add no_forwarding.sh to the list of
"to be installed tests" where it has been missing so far.

Fixes: 476a4f05d9b83f ("selftests: forwarding: add a no_forwarding.sh test")
Signed-off-by: Martin Blumenstingl 
Reviewed-by: Vladimir Oltean 
Signed-off-by: Jakub Kicinski

selftests: forwarding: Install local_termination.sh

2022-07-09T03:30:57+00:00

When using the Makefile from tools/testing/selftests/net/forwarding/
all tests should be installed. Add local_termination.sh to the list of
"to be installed tests" where it has been missing so far.

Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh")
Signed-off-by: Martin Blumenstingl 
Reviewed-by: Vladimir Oltean 
Signed-off-by: Jakub Kicinski