kvm_hypercall has to place the hypercall number in rax.

Trace events show that kvm_pv_test doesn't work properly:
     kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
     kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
     kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0

With this change, it starts working as expected:
     kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0
     kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0
     kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0

Signed-off-by: Andrei Vagin <avagin@google.com>
Message-Id: <20220722230241.1944655-5-avagin@google.com>
Fixes: ac4a4d6de22e ("selftests: kvm: test enforcement of paravirtual cpuid features")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM/s390, KVM/x86 and common infrastructure changes for 5.20

x86:

* Permit guests to ignore single-bit ECC errors

* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache

* Intel IPI virtualization

* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS

* PEBS virtualization

* Simplify PMU emulation by just using PERF_TYPE_RAW events

* More accurate event reinjection on SVM (avoid retrying instructions)

* Allow getting/setting the state of the speaker port data bit

* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent

* "Notify" VM exit (detect microarchitectural hangs) for Intel

* Cleanups for MCE MSR emulation

s390:

* add an interface to provide a hypervisor dump for secure guests

* improve selftests to use TAP interface

* enable interpretive execution of zPCI instructions (for PCI passthrough)

* First part of deferred teardown

* CPU Topology

* PV attestation

* Minor fixes

Generic:

* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple

x86:

* Use try_cmpxchg64 instead of cmpxchg64

* Bugfixes

* Ignore benign host accesses to PMU MSRs when PMU is disabled

* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior

* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis

* Port eager page splitting to shadow MMU as well

* Enable CMCI capability by default and handle injected UCNA errors

* Expose pid of vcpu threads in debugfs

* x2AVIC support for AMD

* cleanup PIO emulation

* Fixes for LLDT/LTR emulation

* Don't require refcounted "struct page" to create huge SPTEs

x86 cleanups:

* Use separate namespaces for guest PTEs and shadow PTEs bitmasks

* PIO emulation

* Reorganize rmap API, mostly around rmap destruction

* Do not workaround very old KVM bugs for L0 that runs with nesting enabled

* new selftests API for CPUID

Use cpuid() to get CPUID.0x0 in cpu_vendor_string_is(), thus eliminating
the last open coded usage of CPUID (ignoring debug_regs.c, which emits
CPUID from the guest to trigger a VM-Exit and doesn't actually care about
the results of CPUID).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-42-seanjc@google.com

Provide informative error messages for the various checks related to
requesting access to XSAVE features that are buried behind XSAVE Feature
Disabling (XFD).

Opportunistically rename the helper to have "require" in the name so that
it's somewhat obvious that the helper may skip the test.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-41-seanjc@google.com

Skip the AMX test instead of silently returning if the host kernel
doesn't support ARCH_REQ_XCOMP_GUEST_PERM.  KVM didn't support XFD until
v5.17, so it's extremely unlikely allowing the test to run on a pre-v5.15
kernel is the right thing to do.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-40-seanjc@google.com

Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(),
simply checking host CPUID doesn't guarantee KVM supports AMX/XFD.

Opportunistically hoist the check above the bit check; if XFD isn't
supported, it's far better to get a "not supported at all" message, as
opposed to a "feature X isn't supported" message".

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-39-seanjc@google.com

Make the "get max CPUID leaf" helpers static inline, there's no reason to
bury the one liners in processor.c.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-38-seanjc@google.com

Set the function/index for CPUID in the helper instead of relying on the
caller to do so.  In addition to reducing the risk of consuming an
uninitialized ECX, having the function/index embedded in the call makes
it easier to understand what is being checked.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-32-seanjc@google.com

Tag the returned CPUID pointers from kvm_get_supported_cpuid(),
kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const"
to prevent reintroducing the broken pattern of modifying the static
"cpuid" variable used by kvm_get_supported_cpuid() to cache the results
of KVM_GET_SUPPORTED_CPUID.

Update downstream consumers as needed.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-31-seanjc@google.com

Use the vCPU's persistent CPUID array directly when manipulating the set
of exposed Hyper-V CPUID features.  Drop set_cpuid() to route all future
modification through the vCPU helpers; the Hyper-V features test was the
last user.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-27-seanjc@google.com