Pull more MM updates from Andrew Morton:

 - "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
   (Lorenzo Stoakes)

   Index MAP_PRIVATE file-backed folios by their anonymous page offset
   to resolve confusion around reverse mapping for zeroed and CoW'd
   file-backed memory.

   Use this new VMA anonymous page offset tracking to eliminate index
   conflicts and lay the foundation for scalable CoW performance
   improvements.

 - "promote mapped executable folios after first usage for MGLRU"
   (Baolin Wang)

   Make MGLRU's protection of mapped executable file folios more
   reliable. Follow the classical LRU's logic, promoting mapped
   executable file folios after their first usage to give executable
   code a better chance to stay in memory and improve workload
   performance.

 - "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
   Chen)

   Fix per-node proactive reclaim interface's ignoring the swappiness
   parameter when CONFIG_MEMCG is disabled by consolidating
   sc_swappiness() into a single function that checks
   proactive_swappiness regardless of kernel configuration.

 - "mm/vmscan: reduce lru_lock contention via vmstat-derived
   scan-balance cost" (Usama Arif)

   Reduce lru_lock contention in the reclaim path by deriving
   scan-balance costs from vmstat counters rather than lock-acquired
   producer updates.

   Read and decay these cost signals on the reclaim side under a
   dedicated per-lruvec lock, reducing total LRU lock wait time by over
   60% without impacting scan throughput.

 - "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)

   Fix two low-risk zram bugs which Sashiko spotted in drive-by review.

 - "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
   memcg" (Zi Yan)

   Fix xas_split_alloc() by enabling target folio memcg charging during
   splits and adding the missing __GFP_ACCOUNT flag for proper XArray
   node memory accounting.

 - "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)

   Replace hardcoded binary names in selftests/mm/.gitignore with a
   generic pattern-matching rule to automatically ignore generated test
   files and avoid manual updates when adding new tests.

 - "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)

   Make the incompatibility between FLATMEM and NUMA explicit in
   mm/Kconfig and remove the unused pgdat_page_ext_init() function.

 - "zram: fix zstd error paths and add parameter validation" (Haoqin
   Huang)

   Clean up zram compression backends by removing redundant error
   cleanup, adding parameter and dictionary validation, auto-prefixing
   algorithm error logs, and resetting parameters prior to
   reinitialization.

 - "zram: fix stale scan bounds after reinitialization" (Longlong Xia)

   Prevent out-of-bounds slot accesses during concurrent zram resets by
   moving table scan bound calculations under dev_lock in
   writeback_store() and read_block_state().

 - "add anon mTHP collapse test cases" (Baolin Wang)

   Extend selftests helper functions to support arbitrary page orders
   and add new test cases and options for mTHP collapse in khugepaged.

 - "selftests/mm: Handle unsupported and transient test conditions"
   (Muhammad Usama Anjum)

   Update MM selftests to report a SKIP status instead of a failure when
   required kernel or filesystem features are unsupported, while adding
   retry logic for transient page migration errors.

 - "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)

   Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
   and extend shrink_memcg() to support batch writeback for improved
   writeback efficiency.

 - "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
   Baghdasaryan)

   Introduce an IOCTL-based binary interface for memory allocation
   profiling that enables kernel-side filtering before per-CPU counter
   aggregation.

   This eliminates the text-parsing overhead of /proc/allocinfo and
   provides up to a 20x speedup by transferring only filtered allocation
   data to userspace.

 - "better block swap batching and a different take on swap_ops v5"
   (Christoph Hellwig)

   Refactor block swap I/O to use swap_iocb for batching instead of
   single-bio requests and rebase the swap_ops interface, achieving
   faster swap throughput during kernel builds.

 - "mm: kmemleak: reduce transient false positives by confirming leaks"
   (Catalin Marinas)

   Reduce false-positive kmemleak reports by combining two kmemleak
   enhancements that add a second confirmation scan and a configurable
   minimum unreferenced scan count module parameter.

 - "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
   (Breno Leitao)

   Auto-scanning kernels can generate false-positive memory leak reports
   on single scans, so this patch defaults min_unref_scans to 2 when
   CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
   confirming scan.

 - "swap_ops updates" (Christoph Hellwig)

   Batching I/O for synchronous swap devices causes performance
   regressions and filesystem-based swap suffers from double-indirection
   overhead. This series resolves both issues by reintroducing per-folio
   writes for synchronous swap and allowing filesystems to directly
   export their own swap_ops.

 - "mm/khugepaged: several cleanups" (Nico Pache)

   khugepaged accumulated redundant state-checking patterns and outdated
   comments following mTHP integration. Introduce dedicated helpers for
   PTE validation and event counting while refreshing the internal
   documentation.

 - "maple_tree: lock checking and clean ups" (Liam Howlett)

   Syzbot reports incorrectly blame memory management exit paths for
   locking bugs, maple tree erase operations risk allocation failures
   without gfp flags and internal documentation lacks clarity.

   Improve lock error detection, update docs, fix race and allocation
   edge cases and optimize erase allocations using a fallback to
   GFP_KERNEL | GFP_NOFAIL.

* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
  selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
  memcg: move LRU size accounting on reparenting instead of copying it
  mm/vmscan: fix comment logic in balance_pgdat
  maple_tree: add helper mas_make_walkable()
  maple_tree: avoid extra gap calculation
  maple_tree: fix argument name in header
  maple_tree: change two GFP flags in tests
  maple_tree: document erase and allocations better
  maple_tree: avoid mas_erase() and mtree_erase() failures
  maple_tree: document that erase may use GFP_KERNEL for allocations
  maple_tree: catch race in mas_alloc_cyclic()
  maple_tree: add bulk parent set helper
  maple_tree: micro optimisation of mas_wr_store_type()
  maple_tree: optimise mas_wr_node_store() when not in rcu mode
  maple_tree: use prefetched value in mas_wr_store_type()
  maple_tree: clarify comments on mas_nomem()
  maple_tree: drop MAPLE_ALLOC_SLOTS
  maple_tree: drop dead code from mas_extend_spanning_null()
  maple_tree: documentation fix
  maple_tree: add write lock checking with lockdep sequence numbers
  ...

test_no_kmem_bypass() needs to read /sys/kernel/debug/zswap/stored_pages
via get_zswap_stored_pages() to verify that compressed pages are charged
to the memcg.

When running in an environment where debugfs is not mounted or
CONFIG_DEBUG_FS is disabled, get_zswap_stored_pages() fails, causing the
loop to terminate early and report a false negative (KSFT_FAIL).

Selftests should not fail if debugfs is unavailable, and it should print a
message when it is skipped.

While I'm here, also add a warning message if the test is being skipped
due to totalram size and make the check for totalram more readable.

[akpm@linux-foundation.org: clarify debugfs-unavailable error message]
Link: https://lore.kernel.org/20260812050848.848882-1-wfelipe@google.com
Link: https://lore.kernel.org/20260811051434.3805648-1-wfelipe@google.com
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: SJ Park <sj@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

For lower HZ values a quota of 1000us is much lower than the amount
of microseconds per tick which makes the tests test_cpucg_max and
test_cpugc_max_nested fail. Increase the test duration to accommodate
for lower HZ values.

Link: https://lore.kernel.org/lkml/20260625203307.1114538-1-joest@redhat.com/
Signed-off-by: Joe Simmons-Talbott <joest@redhat.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The cgroup utility code defines a local PAGE_SIZE macro hardcoded to 4096,
which is used primarily as a generic buffer size for reading cgroup and
proc files.  This naming is misleading because the value has nothing to do
with the actual page size of the system.  On architectures with larger
pages (e.g., 64K on arm64 or ppc64), the name suggests a relationship that
does not exist.  Additionally, the name can shadow or conflict with
PAGE_SIZE definitions from system headers, leading to confusion or subtle
bugs.

To resolve this, rename the macro to BUF_SIZE to accurately reflect its
purpose as a general I/O buffer size.

Furthermore, test_memcontrol currently relies on this hardcoded 4K value
to stride through memory and trigger page faults.  Update this logic to
use the actual system page size dynamically.  This micro-optimizes the
memory faulting process by ensuring it iterates correctly and efficiently
based on the underlying architecture's true page size.  (This part from
Waiman)

Link: https://lore.kernel.org/20260424040059.12940-5-li.wang@linux.dev
Signed-off-by: Li Wang <li.wang@linux.dev>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Yosry Ahmed <yosry@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

test_cgcore_populated (test_core) and test_cgkill_{simple,tree,forkbomb}
(test_kill) check cgroup.events "populated 0" immediately after reaping
child tasks with waitpid(). This used to work because cgroup_task_exit() in
do_exit() unlinked tasks from css_sets before exit_notify() woke up
waitpid().

d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done
switching out") moved the unlink to cgroup_task_dead() in
finish_task_switch(), which runs after exit_notify(). The populated counter
is now decremented after the parent's waitpid() can return, so there is no
longer a synchronous ordering guarantee. On PREEMPT_RT, where
cgroup_task_dead() is further deferred through lazy irq_work, the race
window is even larger.

The synchronous populated transition was never part of the cgroup interface
contract - it was an implementation artifact. Use cg_read_strcmp_wait() which
retries for up to 1 second, matching what these tests actually need to
verify: that the cgroup eventually becomes unpopulated after all tasks exit.

Fixes: d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: cgroups@vger.kernel.org

Introduce a new helper function `cg_read_key_long_poll()` in
cgroup_util.h. This function polls the specified key in a cgroup file
until it matches the expected value or the retry limit is reached,
with configurable wait intervals between retries.

This helper is particularly useful for handling asynchronously updated
cgroup statistics (e.g., memory.stat), where immediate reads may
observe stale values, especially on busy systems. It allows tests and
other utilities to handle such cases more flexibly.

Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.

Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.

Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The predicates in test expect event counting from 73e75e6fc352b
("cgroup/pids: Separate semantics of pids.events related to pids.max")
and the test would fail on older kernels. We want to have one version of
tests for all, so detect the feature and skip the test on old kernels.
(The test could even switch to check v1 semantics based on the flag but
keep it simple for now.)

Fixes: 9f34c566027b6 ("selftests: cgroup: Add basic tests for pids controller")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Tested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Non-functional change, the control variable will be wired in a separate
commit.

Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Add an API in the cgroups library to find the root of a specific
controller.  KVM selftests will use the API to find the memory controller.

Search for the controller on both v1 and v2 mounts, as KVM selftests'
usage will be completely oblivious of v1 versus v2.

Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-6-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>