linux.git/tools/testing/selftests/bpf/test_sockmap.c, branch v5.9

bpf, selftests: Use single cgroup helpers for both test_sockmap/progs

2020-08-02T03:20:59+00:00

Nearly every user of cgroup helpers does the same sequence of API calls. So
push these into a single helper cgroup_setup_and_join. The cases that do
a bit of extra logic are test_progs which currently uses an env variable
to decide if it needs to setup the cgroup environment or can use an
existingi environment. And then tests that are doing cgroup tests
themselves. We skip these cases for now.

Signed-off-by: John Fastabend 
Signed-off-by: Alexei Starovoitov 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/159623335418.30208.15807461815525100199.stgit@john-XPS-13-9370

bpf, sockmap: Add ingres skb tests that utilize merge skbs

2020-06-28T15:33:28+00:00

Add a test to check strparser merging skbs is working.

Signed-off-by: John Fastabend 
Signed-off-by: Alexei Starovoitov 
Acked-by: Martin KaFai Lau 
Link: https://lore.kernel.org/bpf/159312681884.18340.4922800172600252370.stgit@john-XPS-13-9370

bpf, selftests: Add test for ktls with skb bpf ingress policy

2020-06-01T21:48:32+00:00

This adds a test for bpf ingress policy. To ensure data writes happen
as expected with extra TLS headers we run these tests with data
verification enabled by default. This will test receive packets have
"PASS" stamped into the front of the payload.

Signed-off-by: John Fastabend 
Signed-off-by: Alexei Starovoitov 
Link: https://lore.kernel.org/bpf/159079363965.5745.3390806911628980210.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov

bpf: Selftests, add ktls tests to test_sockmap

2020-05-16T00:56:49+00:00

Until now we have only had minimal ktls+sockmap testing when being
used with helpers and different sendmsg/sendpage patterns. Add a
pass with ktls here.

To run just ktls tests,

 $ ./test_sockmap --whitelist="ktls"

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower

bpf: Selftests, add blacklist to test_sockmap

2020-05-16T00:56:49+00:00

This adds a blacklist to test_sockmap. For example, now we can run
all apply and cork tests except those with timeouts by doing,

 $ ./test_sockmap --whitelist "apply,cork" --blacklist "hang"

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower

bpf: Selftests, add whitelist option to test_sockmap

2020-05-16T00:56:49+00:00

Allow running specific tests with a comma deliminated whitelist. For example
to run all apply and cork tests.

 $ ./test_sockmap --whitelist="cork,apply"

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower

bpf: Selftests, provide verbose option for selftests execution

2020-05-16T00:56:49+00:00

Pass options from command line args into individual tests which allows us
to use verbose option from command line with selftests. Now when verbose
option is set individual subtest details will be printed. Also we can
consolidate cgroup bring up and tear down.

Additionally just setting verbose is very noisy so introduce verbose=1
and verbose=2. Really verbose=2 is only useful when developing tests
or debugging some specific issue.

For example now we get output like this with --verbose,

#20/17 sockhash:txmsg test pull-data:OK
 [TEST 160]: (512, 1, 3, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 161]: (100, 1, 5, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
 [TEST 162]: (2, 1024, 256, sendpage, pop (4096,8192),): msg_loop_rx: iov_count 1 iov_buf 255 cnt 2 err 0
 [TEST 163]: (512, 1, 3, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 164]: (100, 1, 5, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
 [TEST 165]: (512, 1, 3, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 166]: (100, 1, 5, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
 [TEST 167]: (512, 1, 3, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 168]: (100, 1, 5, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939730412.15176.1975675235035143367.stgit@john-Precision-5820-Tower

bpf: Selftests, break down test_sockmap into subtests

2020-05-16T00:56:49+00:00

At the moment test_sockmap runs all 800+ tests ungrouped which is not
ideal because it makes it hard to see what is failing but also more
importantly its hard to confirm all cases are tested. Additionally,
after inspecting we noticed the runtime is bloated because we run
many duplicate tests. Worse some of these tests are known error cases
that wait for the recvmsg handler to timeout which creats long delays.
Also we noted some tests were not clearing their options and as a
result the following tests would run with extra and incorrect options.

Fix this by reorganizing test code so its clear what tests are running
and when. Then it becomes easy to remove duplication and run tests with
only the set of send/recv patterns that are relavent.

To accomplish this break test_sockmap into subtests and remove
unnecessary duplication. The output is more readable now and
the runtime reduced.

Now default output prints subtests like this,

 $ ./test_sockmap
 # 1/ 6  sockmap:txmsg test passthrough:OK
 ...
 #22/ 1 sockhash:txmsg test push/pop data:OK
 Pass: 22 Fail: 0

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower

bpf: Selftests, improve test_sockmap total bytes counter

2020-05-16T00:56:49+00:00

The recv thread in test_sockmap waits to receive all bytes from sender but
in the case we use pop data it may wait for more bytes then actually being
sent. This stalls the test harness for multiple seconds. Because this
happens in multiple tests it slows time to run the selftest.

Fix by doing a better job of accounting for total bytes when pop helpers
are used.

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower

bpf: Selftests, print error in test_sockmap error cases

2020-05-16T00:56:49+00:00

Its helpful to know the error value if an error occurs.

Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158939724566.15176.12079885932643225626.stgit@john-Precision-5820-Tower